Sorry I didn't fully read your mail, probably you need some comerical program for full functionality. I just checked on Polycom's home page that they actually do have that kind of "Management Application", and I bet it is as expensive as the HDX8006 itself :) 2011. február 25. 15:19:24 dátummal MÉSZÁROS Mihály az alábbiakat írta:

Hi Zsolt,

I need media proxy between IPv6 and IPv4. Not only a signaling proxy needed, so SIP Express Router is not enough. I need also a Media proxy what can proxy many (and furthermore any) media like BFCP, FECC h.224, as i wrote before.

Thanks, Misi

2011-02-24 21:52 keltezéssel, Puskás Zsolt írta:

...

Hi.

If you just want a sip proxy use OpenSER or Opensips.

2011. február 23. 14:14:11 dátummal MÉSZÁROS Mihály az alábbiakat írta:

...

Hi,

1. Is it possible to create ipv6<=> ipv4 media proxy from FreeSwitch?

So i need to mangle SDP to replace ipv6 to ipv4 and vice-versa. (but i use fnacy things like BFCP,FECC(H.224),secondary video)

2. Further more I need to know that FreeSwitch can function as a real

media proxy? So can it PROXY as MEDIA like BFCP(TCP!), FECC and secondary video?

3. Can i use more than one stream so more than 1 audio + 1 video

stream in a sip call in proxy media mode? For example 1 audio + 2 video stream (people+presentation)

Example SDP piece for BFCP, and FECC(H.224): m=application 49158 RTP/SAVP 100 a=rtpmap:100 H224/4800 a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:lv6Y5eO/RSDDOFNvbFmM0q9tfrt3/ZxXqPJx4Pj5|2^31 m=application 0 TCP/BFCP * a=floorctrl:c-s a=setup:actpass a=connection:new

Any help highly appreciated!

Thanks, Misi

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

Hi Steven et al. 2011-02-25 16:01 keltezéssel, Steven Ayre írta:

...

Is it possible to create ipv6<=> ipv4 media proxy from FreeSwitch? So i need to mangle SDP to replace ipv6 to ipv4 and vice-versa. (but i use fnacy things like BFCP,FECC(H.224),secondary video)

If aleg is on IPv4 and bleg is on IPv6 then FS will allow that and it'll handle putting the correct IPs in the SDPs itself. No extra work required. A sip profile for each class, and bridge between them in dialplan.

It is working but i need extra features like secondary video stream for content and Application protocol (H.224 for Far End Camera Control) and BFCP for content. So in B2BUA mode with bridged media the advanced protocols will not work. If i use FreeSwitch media_bypass mode, so SDP and the media is flowing directly then i can't connect ipv4 only with ipv6 only media. So i need media proxy mode, but i am experiencing that advanced features, don't work. So what i need to replace only ipv6 and ipv4 address in sdp, and connect all streams regardless they are UDP or TCP or otherelse to FreeSwitch internal media proxy. I miss application media streams proxy capability etc.

...

Further more I need to know that FreeSwitch can function as a real media proxy?

Yes, it does.

Ok I am experiencing FS media proxy has limitations. AFAIK only one audio and one video stream, no application protocols.

...

So can it PROXY as MEDIA like BFCP(TCP!), FECC and secondary video?

No support for BFCP. FECC isn't supported natively, but should work in proxy_media mode where FS doesn't need to know the codec, just forwards the RTP straight through. AFAIK, secondary video isn't supported. It might work in proxy_media but probably not...

However, you might find you have a problem even with proxy_media...

...

m=application

I've only ever seen FS handling m=audio and m=video streams. I don't know whether it would handle m=application ones.

My experience is that it is not handling m=application . :-( Thank you for your reply! Thanks, Misi

-Steve

2011/2/23 MÉSZÁROS Mihály<misi@niif.hu>:

...

Hi,

Is it possible to create ipv6<=> ipv4 media proxy from FreeSwitch? So i need to mangle SDP to replace ipv6 to ipv4 and vice-versa. (but i use fnacy things like BFCP,FECC(H.224),secondary video) Further more I need to know that FreeSwitch can function as a real media proxy? So can it PROXY as MEDIA like BFCP(TCP!), FECC and secondary video? Can i use more than one stream so more than 1 audio + 1 video stream in a sip call in proxy media mode? For example 1 audio + 2 video stream (people+presentation)

Example SDP piece for BFCP, and FECC(H.224):

m=application 49158 RTP/SAVP 100 a=rtpmap:100 H224/4800 a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:lv6Y5eO/RSDDOFNvbFmM0q9tfrt3/ZxXqPJx4Pj5|2^31 m=application 0 TCP/BFCP * a=floorctrl:c-s a=setup:actpass a=connection:new

Any help highly appreciated!

Thanks, Misi

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org