Re: [Freeswitch-users] LRN DIP 302 Dialplan
Hi, I'm checking to see if that is the best way to do the dip. So calling the dialplan then waiting for the on hang up complete then dialing again is the right way? Andre -----Original Message----- From: "Avi Marcus" <avi@avimarcus.net> Sent: 7/8/2013 5:07 PM To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] LRN DIP 302 Dialplan Sure, do the dip first then do your LCR. Maybe I'm just not getting the question? -Avi On Mon, Jul 8, 2013 at 6:54 PM, <andretodd@verizon.net> wrote: HI, I need to look up a number to see if it's ported/ LCR before I bridge the call. What is the best way to go about doing this. Call comes in, I need to look up the LRN data via SIP 302. The results of that I need to hit my database for the LCR then I need to bridge the number. Would it be wise to dial the LRN server then on Hangup complete hit the database then dial the number? Thanks _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Once you bridge and get a 302, you get dumped back into the dialplan where the information is available in the channel variables. I think ${sip_redirect_contact_params_1} and ${sip_redirect_contact_host_1} has the first route... so grab the lrn number and use that with the original number for your LCR. -Avi On Tue, Jul 9, 2013 at 12:34 AM, Andre Demattia <andretodd@verizon.net>wrote:
Hi, I'm checking to see if that is the best way to do the dip. So calling the dialplan then waiting for the on hang up complete then dialing again is the right way? Andre ------------------------------ From: Avi Marcus <avi@avimarcus.net> Sent: 7/8/2013 5:07 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] LRN DIP 302 Dialplan
Sure, do the dip first then do your LCR. Maybe I'm just not getting the question? -Avi
On Mon, Jul 8, 2013 at 6:54 PM, <andretodd@verizon.net> wrote:
HI, I need to look up a number to see if it's ported/ LCR before I bridge the call. What is the best way to go about doing this.
Call comes in, I need to look up the LRN data via SIP 302. The results of that I need to hit my database for the LCR then I need to bridge the number.
Would it be wise to dial the LRN server then on Hangup complete hit the database then dial the number? Thanks
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Before doing dip you can define sip_redirect_profile/sip_redirect_context and bridge a call for lrn dip, Once FS get the 302 after dip it will redirect the call to defined profile/context and you can do your LCR logic over this profile/context. If I am not wrong, after lrn dip you need to check "tel" URI for ported number. Regards Shishir On 08.07.2013 14:47, Avi Marcus wrote:
Once you bridge and get a 302, you get dumped back into the dialplan where the information is available in the channel variables. I think ${sip_redirect_contact_params_1} and ${sip_redirect_contact_host_1} has the first route... so grab the lrn number and use that with the original number for your LCR.
-Avi
On Tue, Jul 9, 2013 at 12:34 AM, Andre Demattia wrote:
Hi, I'm checking to see if that is the best way to do the dip. So calling the dialplan then waiting for the on hang up complete then dialing again is the right way? Andre
------------------------- From: Avi Marcus [11] Sent: 7/8/2013 5:07 PM To: FreeSWITCH Users Help [12] Subject: Re: [Freeswitch-users] LRN DIP 302 Dialplan
Sure, do the dip first then do your LCR. Maybe I'm just not getting the question?
-Avi
On Mon, Jul 8, 2013 at 6:54 PM, wrote:
HI, I need to look up a number to see if it's ported/ LCR before I bridge the call. What is the best way to go about doing this. Call comes in, I need to look up the LRN data via SIP 302. The results of that I need to hit my database for the LCR then I need to bridge the number. Would it be wise to dial the LRN server then on Hangup complete hit the database then dial the number? Thanks
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org [1] http://www.freeswitchsolutions.com [2]
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com [3]
Official FreeSWITCH Sites http://www.freeswitch.org [4] http://wiki.freeswitch.org [5] http://www.cluecon.com [6]
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org [7] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [8]
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
[9] http://www.freeswitch.org [10]
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org [14] http://www.freeswitchsolutions.com [15]
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com [16]
Official FreeSWITCH Sites http://www.freeswitch.org [17] http://wiki.freeswitch.org [18] http://www.cluecon.com [19]
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org [20] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [21]
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
[22] http://www.freeswitch.org [23]
Links: ------ [1] mailto:consulting@freeswitch.org [2] http://www.freeswitchsolutions.com [3] http://www.cudatel.com [4] http://www.freeswitch.org [5] http://wiki.freeswitch.org [6] http://www.cluecon.com [7] mailto:FreeSWITCH-users@lists.freeswitch.org [8] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [9] http://lists.freeswitch.org/mailman/options/freeswitch-users [10] http://www.freeswitch.org [11] mailto:avi@avimarcus.net [12] mailto:freeswitch-users@lists.freeswitch.org [13] mailto:andretodd@verizon.net [14] mailto:consulting@freeswitch.org [15] http://www.freeswitchsolutions.com [16] http://www.cudatel.com [17] http://www.freeswitch.org [18] http://wiki.freeswitch.org [19] http://www.cluecon.com [20] mailto:FreeSWITCH-users@lists.freeswitch.org [21] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [22] http://lists.freeswitch.org/mailman/options/freeswitch-users [23] http://www.freeswitch.org [24] mailto:andretodd@verizon.net
Would I also have the ability to hit the database to find LCR etc? I'm doing everything in Mod_Managed via C#. Also, where do I find documentation on how to do what you stated below? Thanks everyone -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of info@shishir.com.np Sent: Monday, July 8, 2013 7:31 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] LRN DIP 302 Dialplan Before doing dip you can define sip_redirect_profile/sip_redirect_context and bridge a call for lrn dip, Once FS get the 302 after dip it will redirect the call to defined profile/context and you can do your LCR logic over this profile/context. If I am not wrong, after lrn dip you need to check "tel" URI for ported number. Regards Shishir On 08.07.2013 14:47, Avi Marcus wrote:
Once you bridge and get a 302, you get dumped back into the dialplan where the information is available in the channel variables. I think ${sip_redirect_contact_params_1} and ${sip_redirect_contact_host_1} has the first route... so grab the lrn number and use that with the original number for your LCR.
-Avi
On Tue, Jul 9, 2013 at 12:34 AM, Andre Demattia wrote:
Hi, I'm checking to see if that is the best way to do the dip. So calling the dialplan then waiting for the on hang up complete then dialing again is the right way? Andre
------------------------- From: Avi Marcus [11] Sent: 7/8/2013 5:07 PM To: FreeSWITCH Users Help [12] Subject: Re: [Freeswitch-users] LRN DIP 302 Dialplan
Sure, do the dip first then do your LCR. Maybe I'm just not getting the question?
-Avi
On Mon, Jul 8, 2013 at 6:54 PM, wrote:
HI, I need to look up a number to see if it's ported/ LCR before I bridge the call. What is the best way to go about doing this.
Call comes in, I need to look up the LRN data via SIP 302. The results of that I need to hit my database for the LCR then I need to bridge the number.
Would it be wise to dial the LRN server then on Hangup complete hit the database then dial the number? Thanks
______________________________________________________________________ ___
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org [1] http://www.freeswitchsolutions.com [2]
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com [3]
Official FreeSWITCH Sites http://www.freeswitch.org [4] http://wiki.freeswitch.org [5] http://www.cluecon.com [6]
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org [7] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [8]
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
[9] http://www.freeswitch.org [10]
______________________________________________________________________ ___
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org [14] http://www.freeswitchsolutions.com [15]
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com [16]
Official FreeSWITCH Sites http://www.freeswitch.org [17] http://wiki.freeswitch.org [18] http://www.cluecon.com [19]
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org [20] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [21]
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
[22] http://www.freeswitch.org [23]
Links: ------ [1] mailto:consulting@freeswitch.org [2] http://www.freeswitchsolutions.com [3] http://www.cudatel.com [4] http://www.freeswitch.org [5] http://wiki.freeswitch.org [6] http://www.cluecon.com [7] mailto:FreeSWITCH-users@lists.freeswitch.org [8] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [9] http://lists.freeswitch.org/mailman/options/freeswitch-users [10] http://www.freeswitch.org [11] mailto:avi@avimarcus.net [12] mailto:freeswitch-users@lists.freeswitch.org [13] mailto:andretodd@verizon.net [14] mailto:consulting@freeswitch.org [15] http://www.freeswitchsolutions.com [16] http://www.cudatel.com [17] http://www.freeswitch.org [18] http://wiki.freeswitch.org [19] http://www.cluecon.com [20] mailto:FreeSWITCH-users@lists.freeswitch.org [21] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [22] http://lists.freeswitch.org/mailman/options/freeswitch-users [23] http://www.freeswitch.org [24] mailto:andretodd@verizon.net
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
http://tools.ietf.org/html/rfc4694 http://wiki.freeswitch.org/wiki/Dialplan_Handling_Incoming_Redirect On 08.07.2013 17:12, Andre wrote:
Would I also have the ability to hit the database to find LCR etc? I'm doing everything in Mod_Managed via C#.
Also, where do I find documentation on how to do what you stated below? Thanks everyone
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of info@shishir.com.np Sent: Monday, July 8, 2013 7:31 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] LRN DIP 302 Dialplan
Before doing dip you can define sip_redirect_profile/sip_redirect_context and bridge a call for lrn dip, Once FS get the 302 after dip it will redirect the call to defined profile/context and you can do your LCR logic over this profile/context.
If I am not wrong, after lrn dip you need to check "tel" URI for ported number.
Regards Shishir
On 08.07.2013 14:47, Avi Marcus wrote:
Once you bridge and get a 302, you get dumped back into the dialplan where the information is available in the channel variables. I think ${sip_redirect_contact_params_1} and ${sip_redirect_contact_host_1} has the first route... so grab the lrn number and use that with the original number for your LCR.
-Avi
On Tue, Jul 9, 2013 at 12:34 AM, Andre Demattia wrote:
Hi, I'm checking to see if that is the best way to do the dip. So calling the dialplan then waiting for the on hang up complete then dialing again is the right way? Andre
------------------------- From: Avi Marcus [11] Sent: 7/8/2013 5:07 PM To: FreeSWITCH Users Help [12] Subject: Re: [Freeswitch-users] LRN DIP 302 Dialplan
Sure, do the dip first then do your LCR. Maybe I'm just not getting the question?
-Avi
On Mon, Jul 8, 2013 at 6:54 PM, wrote:
HI, I need to look up a number to see if it's ported/ LCR before I bridge the call. What is the best way to go about doing this.
Call comes in, I need to look up the LRN data via SIP 302. The results of that I need to hit my database for the LCR then I need to bridge the number.
Would it be wise to dial the LRN server then on Hangup complete hit the database then dial the number? Thanks
______________________________________________________________________ ___
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org [1] http://www.freeswitchsolutions.com [2]
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com [3]
Official FreeSWITCH Sites http://www.freeswitch.org [4] http://wiki.freeswitch.org [5] http://www.cluecon.com [6]
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org [7] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [8]
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
[9] http://www.freeswitch.org [10]
______________________________________________________________________ ___
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org [14] http://www.freeswitchsolutions.com [15]
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com [16]
Official FreeSWITCH Sites http://www.freeswitch.org [17] http://wiki.freeswitch.org [18] http://www.cluecon.com [19]
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org [20] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [21]
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
[22] http://www.freeswitch.org [23]
Links: ------ [1] mailto:consulting@freeswitch.org [2] http://www.freeswitchsolutions.com [3] http://www.cudatel.com [4] http://www.freeswitch.org [5] http://wiki.freeswitch.org [6] http://www.cluecon.com [7] mailto:FreeSWITCH-users@lists.freeswitch.org [8] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [9] http://lists.freeswitch.org/mailman/options/freeswitch-users [10] http://www.freeswitch.org [11] mailto:avi@avimarcus.net [12] mailto:freeswitch-users@lists.freeswitch.org [13] mailto:andretodd@verizon.net [14] mailto:consulting@freeswitch.org [15] http://www.freeswitchsolutions.com [16] http://www.cudatel.com [17] http://www.freeswitch.org [18] http://wiki.freeswitch.org [19] http://www.cluecon.com [20] mailto:FreeSWITCH-users@lists.freeswitch.org [21] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [22] http://lists.freeswitch.org/mailman/options/freeswitch-users [23] http://www.freeswitch.org [24] mailto:andretodd@verizon.net
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
And: http://wiki.freeswitch.org/wiki/Mod_lcr You can do all this in the static dial plan. -Avi On Tue, Jul 9, 2013 at 3:12 AM, Andre <andretodd@verizon.net> wrote:
Would I also have the ability to hit the database to find LCR etc? I'm doing everything in Mod_Managed via C#.
Also, where do I find documentation on how to do what you stated below? Thanks everyone
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of info@shishir.com.np Sent: Monday, July 8, 2013 7:31 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] LRN DIP 302 Dialplan
Before doing dip you can define sip_redirect_profile/sip_redirect_context and bridge a call for lrn dip, Once FS get the 302 after dip it will redirect the call to defined profile/context and you can do your LCR logic over this profile/context.
If I am not wrong, after lrn dip you need to check "tel" URI for ported number.
Regards Shishir
On 08.07.2013 14:47, Avi Marcus wrote:
Once you bridge and get a 302, you get dumped back into the dialplan where the information is available in the channel variables. I think ${sip_redirect_contact_params_1} and ${sip_redirect_contact_host_1} has the first route... so grab the lrn number and use that with the original number for your LCR.
-Avi
On Tue, Jul 9, 2013 at 12:34 AM, Andre Demattia wrote:
Hi, I'm checking to see if that is the best way to do the dip. So calling the dialplan then waiting for the on hang up complete then dialing again is the right way? Andre
------------------------- From: Avi Marcus [11] Sent: 7/8/2013 5:07 PM To: FreeSWITCH Users Help [12] Subject: Re: [Freeswitch-users] LRN DIP 302 Dialplan
Sure, do the dip first then do your LCR. Maybe I'm just not getting the question?
-Avi
On Mon, Jul 8, 2013 at 6:54 PM, wrote:
HI, I need to look up a number to see if it's ported/ LCR before I bridge the call. What is the best way to go about doing this.
Call comes in, I need to look up the LRN data via SIP 302. The results of that I need to hit my database for the LCR then I need to bridge the number.
Would it be wise to dial the LRN server then on Hangup complete hit the database then dial the number? Thanks
______________________________________________________________________ ___
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org [1] http://www.freeswitchsolutions.com [2]
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com [3]
Official FreeSWITCH Sites http://www.freeswitch.org [4] http://wiki.freeswitch.org [5] http://www.cluecon.com [6]
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org [7] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [8]
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
[9] http://www.freeswitch.org [10]
______________________________________________________________________ ___
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org [14] http://www.freeswitchsolutions.com [15]
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com [16]
Official FreeSWITCH Sites http://www.freeswitch.org [17] http://wiki.freeswitch.org [18] http://www.cluecon.com [19]
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org [20] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [21]
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
[22] http://www.freeswitch.org [23]
Links: ------ [1] mailto:consulting@freeswitch.org [2] http://www.freeswitchsolutions.com [3] http://www.cudatel.com [4] http://www.freeswitch.org [5] http://wiki.freeswitch.org [6] http://www.cluecon.com [7] mailto:FreeSWITCH-users@lists.freeswitch.org [8] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [9] http://lists.freeswitch.org/mailman/options/freeswitch-users [10] http://www.freeswitch.org [11] mailto:avi@avimarcus.net [12] mailto:freeswitch-users@lists.freeswitch.org [13] mailto:andretodd@verizon.net [14] mailto:consulting@freeswitch.org [15] http://www.freeswitchsolutions.com [16] http://www.cudatel.com [17] http://www.freeswitch.org [18] http://wiki.freeswitch.org [19] http://www.cluecon.com [20] mailto:FreeSWITCH-users@lists.freeswitch.org [21] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [22] http://lists.freeswitch.org/mailman/options/freeswitch-users [23] http://www.freeswitch.org [24] mailto:andretodd@verizon.net
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Andre
-
Andre Demattia
-
Avi Marcus
-
info＠shishir.com.np