I installed 2 freeswitch in a single machine in a 2 different user account my intention was to simulate 100 calls from one freeswitch to another freeswitch but once after crossing the 40 calls the freeswitch which is receiving calls threw this error : 2010-09-17 13:25:01.993715 [NOTICE] switch_channel.c:779 New Channel sofia/external/200@192.168.6.182 [f9e96672-c25e-11df-b22d-b96292a72916] 2010-09-17 13:25:01.994725 [CRIT] switch_core_session.c:1255 Cannot create thread! what is it ,why it is unable to create a thread ? -- Best regards, N.Abubacker , Associate system engineer , bk systems pvt ltd , Ph : 9144-43902701 Disclaimer: http://www.bksystems.co.in/email-policy
Did you take care about configuring them not to use the same RTP ports range ? It's likely there are other things to be careful about in a such setup. David Ponzone Direction Technique email: david.ponzone@ipeva.fr tel: 01 74 03 18 97 gsm: 06 66 98 76 34 Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr - www.ipeva-studio.com Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur. Le 17/09/2010 à 15:29, abubacker a écrit :
I installed 2 freeswitch in a single machine in a 2 different user account my intention was to simulate 100 calls from one freeswitch to another freeswitch but once after crossing the 40 calls the freeswitch which is receiving calls threw this error :
2010-09-17 13:25:01.993715 [NOTICE] switch_channel.c:779 New Channel sofia/external/200@192.168.6.182 [f9e96672-c25e-11df-b22d-b96292a72916] 2010-09-17 13:25:01.994725 [CRIT] switch_core_session.c:1255 Cannot create thread!
what is it ,why it is unable to create a thread ?
-- Best regards, N.Abubacker , Associate system engineer , bk systems pvt ltd , Ph : 9144-43902701
Disclaimer: http://www.bksystems.co.in/email-policy _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Your machine consumed it's resource limits for threads. It's probably a 32 bit box with small ulimits. run all theses in your current shell before you start FS ulimit -c unlimited ulimit -d unlimited ulimit -f unlimited ulimit -i unlimited ulimit -n 999999 ulimit -q unlimited ulimit -u unlimited ulimit -v unlimited ulimit -x unlimited ulimit -s 244 ulimit -l unlimited If you still see it, get a much nicer box, 64 bit preferable. On Fri, Sep 17, 2010 at 8:29 AM, abubacker <abubacker@bksystems.co.in> wrote:
I installed 2 freeswitch in a single machine in a 2 different user account my intention was to simulate 100 calls from one freeswitch to another freeswitch but once after crossing the 40 calls the freeswitch which is receiving calls threw this error :
2010-09-17 13:25:01.993715 [NOTICE] switch_channel.c:779 New Channel sofia/external/200@192.168.6.182 [f9e96672-c25e-11df-b22d-b96292a72916] 2010-09-17 13:25:01.994725 [CRIT] switch_core_session.c:1255 Cannot create thread!
what is it ,why it is unable to create a thread ?
-- Best regards, N.Abubacker , Associate system engineer , bk systems pvt ltd , Ph : 9144-43902701
Disclaimer: http://www.bksystems.co.in/email-policy
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
On Friday 17 September 2010 08:11 PM, Anthony Minessale wrote:
Your machine consumed it's resource limits for threads. It's probably a 32 bit box with small ulimits.
run all theses in your current shell before you start FS
ulimit -c unlimited ulimit -d unlimited ulimit -f unlimited ulimit -i unlimited ulimit -n 999999 ulimit -q unlimited ulimit -u unlimited ulimit -v unlimited ulimit -x unlimited ulimit -s 244 ulimit -l unlimited
If you still see it, get a much nicer box, 64 bit preferable.
On Fri, Sep 17, 2010 at 8:29 AM, abubacker<abubacker@bksystems.co.in> wrote:
I installed 2 freeswitch in a single machine in a 2 different user account my intention was to simulate 100 calls from one freeswitch to another freeswitch but once after crossing the 40 calls the freeswitch which is receiving calls threw this error :
2010-09-17 13:25:01.993715 [NOTICE] switch_channel.c:779 New Channel sofia/external/200@192.168.6.182 [f9e96672-c25e-11df-b22d-b96292a72916] 2010-09-17 13:25:01.994725 [CRIT] switch_core_session.c:1255 Cannot create thread!
what is it ,why it is unable to create a thread ?
-- Best regards, N.Abubacker , Associate system engineer , bk systems pvt ltd , Ph : 9144-43902701
Disclaimer: http://www.bksystems.co.in/email-policy
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you antony ,after applying your solution that error didnt appear Can u suggest me the hardware details needs to run a busy call center using freeswitch PBX with detail. -- Best regards, N.Abubacker , Associate system engineer , bk systems pvt ltd , Ph : 9144-43902701 Disclaimer: http://www.bksystems.co.in/email-policy
On Saturday 18 September 2010 02:55 PM, abubacker wrote:
On Friday 17 September 2010 08:11 PM, Anthony Minessale wrote:
Your machine consumed it's resource limits for threads. It's probably a 32 bit box with small ulimits.
run all theses in your current shell before you start FS
ulimit -c unlimited ulimit -d unlimited ulimit -f unlimited ulimit -i unlimited ulimit -n 999999 ulimit -q unlimited ulimit -u unlimited ulimit -v unlimited ulimit -x unlimited ulimit -s 244 ulimit -l unlimited
If you still see it, get a much nicer box, 64 bit preferable.
On Fri, Sep 17, 2010 at 8:29 AM, abubacker<abubacker@bksystems.co.in> wrote:
I installed 2 freeswitch in a single machine in a 2 different user account my intention was to simulate 100 calls from one freeswitch to another freeswitch but once after crossing the 40 calls the freeswitch which is receiving calls threw this error :
2010-09-17 13:25:01.993715 [NOTICE] switch_channel.c:779 New Channel sofia/external/200@192.168.6.182 [f9e96672-c25e-11df-b22d-b96292a72916] 2010-09-17 13:25:01.994725 [CRIT] switch_core_session.c:1255 Cannot create thread!
what is it ,why it is unable to create a thread ?
-- Best regards, N.Abubacker , Associate system engineer , bk systems pvt ltd , Ph : 9144-43902701
Disclaimer: http://www.bksystems.co.in/email-policy
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you antony ,after applying your solution that error didnt appear Can u suggest me the hardware details needs to run a busy call center using freeswitch PBX with detail.
since I am using fifo , show channels command showing 4 calls when 2 customers calling us, status command shows that only 154 sessions are possible , how to increase this sessions and kindly tell me the hardware configurations to park more than 500 calls in freeswitch and more than 200 calls in a queue ( totally 700 calls ) . $ status UP 0 years, 0 days, 0 hours, 1 minute, 51 seconds, 38 milliseconds, 921 microseconds 156 session(s) since startup 154 session(s) 0/30 145 session(s) max min idle cpu 0.00/98.00 -- Best regards, N.Abubacker , Associate system engineer , bk systems pvt ltd , Ph : 9144-43902701 Disclaimer: http://www.bksystems.co.in/email-policy
What's the spec of your machine? Is it 32 or 64 bit? Are you actually using a 64bit OS? If you post your spec then we can tell you whether it looks good enough or what you might want to change... probably better to do it that way because declaring a 'recommended spec' is rather difficult in practice as everyone's use of FreeSWITCH is different so peoples requirements vary dramatically (for instance, how many calls do you get in what, in what period, any transcoding, how many apps, which apps etc, which is different for everyone all affect the system load) -Steve On 18 September 2010 10:25, abubacker <abubacker@bksystems.co.in> wrote:
On Friday 17 September 2010 08:11 PM, Anthony Minessale wrote:
Your machine consumed it's resource limits for threads. It's probably a 32 bit box with small ulimits.
run all theses in your current shell before you start FS
ulimit -c unlimited ulimit -d unlimited ulimit -f unlimited ulimit -i unlimited ulimit -n 999999 ulimit -q unlimited ulimit -u unlimited ulimit -v unlimited ulimit -x unlimited ulimit -s 244 ulimit -l unlimited
If you still see it, get a much nicer box, 64 bit preferable.
On Fri, Sep 17, 2010 at 8:29 AM, abubacker<abubacker@bksystems.co.in> wrote:
I installed 2 freeswitch in a single machine in a 2 different user account my intention was to simulate 100 calls from one freeswitch to another freeswitch but once after crossing the 40 calls the freeswitch which is receiving calls threw this error :
2010-09-17 13:25:01.993715 [NOTICE] switch_channel.c:779 New Channel sofia/external/200@192.168.6.182 [f9e96672-c25e-11df-b22d-b96292a72916] 2010-09-17 13:25:01.994725 [CRIT] switch_core_session.c:1255 Cannot create thread!
what is it ,why it is unable to create a thread ?
-- Best regards, N.Abubacker , Associate system engineer , bk systems pvt ltd , Ph : 9144-43902701
Disclaimer: http://www.bksystems.co.in/email-policy
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you antony ,after applying your solution that error didnt appear Can u suggest me the hardware details needs to run a busy call center using freeswitch PBX with detail.
-- Best regards, N.Abubacker , Associate system engineer , bk systems pvt ltd , Ph : 9144-43902701
Disclaimer: http://www.bksystems.co.in/email-policy
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
my usual answer for a minimum box is: 64 bit (4 or more cores) intel based modern cpu (less than 2 years old) running centos 5.x On Mon, Sep 20, 2010 at 2:25 AM, Steven Ayre <steveayre@gmail.com> wrote:
What's the spec of your machine? Is it 32 or 64 bit? Are you actually using a 64bit OS?
If you post your spec then we can tell you whether it looks good enough or what you might want to change... probably better to do it that way because declaring a 'recommended spec' is rather difficult in practice as everyone's use of FreeSWITCH is different so peoples requirements vary dramatically (for instance, how many calls do you get in what, in what period, any transcoding, how many apps, which apps etc, which is different for everyone all affect the system load)
-Steve
On 18 September 2010 10:25, abubacker <abubacker@bksystems.co.in> wrote:
On Friday 17 September 2010 08:11 PM, Anthony Minessale wrote:
Your machine consumed it's resource limits for threads. It's probably a 32 bit box with small ulimits.
run all theses in your current shell before you start FS
ulimit -c unlimited ulimit -d unlimited ulimit -f unlimited ulimit -i unlimited ulimit -n 999999 ulimit -q unlimited ulimit -u unlimited ulimit -v unlimited ulimit -x unlimited ulimit -s 244 ulimit -l unlimited
If you still see it, get a much nicer box, 64 bit preferable.
On Fri, Sep 17, 2010 at 8:29 AM, abubacker<abubacker@bksystems.co.in> wrote:
I installed 2 freeswitch in a single machine in a 2 different user account my intention was to simulate 100 calls from one freeswitch to another freeswitch but once after crossing the 40 calls the freeswitch which is receiving calls threw this error :
2010-09-17 13:25:01.993715 [NOTICE] switch_channel.c:779 New Channel sofia/external/200@192.168.6.182 [f9e96672-c25e-11df-b22d-b96292a72916] 2010-09-17 13:25:01.994725 [CRIT] switch_core_session.c:1255 Cannot create thread!
what is it ,why it is unable to create a thread ?
-- Best regards, N.Abubacker , Associate system engineer , bk systems pvt ltd , Ph : 9144-43902701
Disclaimer: http://www.bksystems.co.in/email-policy
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you antony ,after applying your solution that error didnt appear Can u suggest me the hardware details needs to run a busy call center using freeswitch PBX with detail.
-- Best regards, N.Abubacker , Associate system engineer , bk systems pvt ltd , Ph : 9144-43902701
Disclaimer: http://www.bksystems.co.in/email-policy
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
participants (4)
-
abubacker
-
Anthony Minessale
-
David Ponzone
-
Steven Ayre