Multiple registrations: Only calling the first element in the list in this mode
Hello, I habe the following behaviour when I call a user which is registered twice with 2 phones via bridge user/100@domain both phones are ringing. This is correct as I allow multiple registrations in a profile However when I call multiple endpoints via bridge user/100@domain,user/101@domain,user/102@domain only one phone with number100 is ringing. Console log shows "Only calling the first element in the list in this mode.": 2010-01-12 19:52:18.236361 [DEBUG] switch_ivr_originate.c:1734 variable string 0 = [presence_id=100@domain] 2010-01-12 19:52:18.236361 [DEBUG] switch_ivr_originate.c:1734 variable string 1 = [transfer_fallback_extension=100] 2010-01-12 19:52:18.236361 [WARNING] switch_ivr_originate.c:2048 Only calling the first element in the list in this mode. 2010-01-12 19:52:18.236361 [NOTICE] switch_channel.c:613 New Channel sofia/internal/sip:100@10.11.12.203:2048 [9b95fcdc-ffab-11de-9ba2-13b2daa7ce61] Is there any way to work around this? I need all phones to be ringing in this scenario. Best regards Peter
Try: bridge user/100@domain:_:user/101@domain:_:user/102@domain Then document it up if it works. On Wed, Jan 13, 2010 at 5:26 AM, Peter P GMX <Prometheus001@gmx.net> wrote:
Hello,
I habe the following behaviour
when I call a user which is registered twice with 2 phones via bridge user/100@domain both phones are ringing. This is correct as I allow multiple registrations in a profile
However when I call multiple endpoints via bridge user/100@domain,user/101@domain,user/102@domain only one phone with number100 is ringing.
Console log shows "Only calling the first element in the list in this mode.": 2010-01-12 19:52:18.236361 [DEBUG] switch_ivr_originate.c:1734 variable string 0 = [presence_id=100@domain] 2010-01-12 19:52:18.236361 [DEBUG] switch_ivr_originate.c:1734 variable string 1 = [transfer_fallback_extension=100] 2010-01-12 19:52:18.236361 [WARNING] switch_ivr_originate.c:2048 Only calling the first element in the list in this mode. 2010-01-12 19:52:18.236361 [NOTICE] switch_channel.c:613 New Channel sofia/internal/sip:100@10.11.12.203:2048 [9b95fcdc-ffab-11de-9ba2-13b2daa7ce61]
Is there any way to work around this? I need all phones to be ringing in this scenario.
Best regards Peter
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -Rupa
Thanks Rupa, this worked. I have documented this in the wiki: http://wiki.freeswitch.org/wiki/Ring_group Best regards Peter Rupa Schomaker schrieb:
Try:
bridge user/100@domain:_:user/101@domain:_:user/102@domain
Then document it up if it works.
On Wed, Jan 13, 2010 at 5:26 AM, Peter P GMX <Prometheus001@gmx.net <mailto:Prometheus001@gmx.net>> wrote:
Hello,
I habe the following behaviour
when I call a user which is registered twice with 2 phones via bridge user/100@domain both phones are ringing. This is correct as I allow multiple registrations in a profile
However when I call multiple endpoints via bridge user/100@domain,user/101@domain,user/102@domain only one phone with number100 is ringing.
Console log shows "Only calling the first element in the list in this mode.": 2010-01-12 19:52:18.236361 [DEBUG] switch_ivr_originate.c:1734 variable string 0 = [presence_id=100@domain] 2010-01-12 19:52:18.236361 [DEBUG] switch_ivr_originate.c:1734 variable string 1 = [transfer_fallback_extension=100] 2010-01-12 19:52:18.236361 [WARNING] switch_ivr_originate.c:2048 Only calling the first element in the list in this mode. 2010-01-12 19:52:18.236361 [NOTICE] switch_channel.c:613 New Channel sofia/internal/sip:100@10.11.12.203:2048 <http://sip:100@10.11.12.203:2048> [9b95fcdc-ffab-11de-9ba2-13b2daa7ce61]
Is there any way to work around this? I need all phones to be ringing in this scenario.
Best regards Peter
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -Rupa ------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I just found out that this method unfortunately had a side effect, when I use ":_:" the caller does not receive a dialtone If I change to "," the dialtone is there Any clue how I can work around this? Best regards Peter Peter P GMX schrieb:
Thanks Rupa,
this worked. I have documented this in the wiki: http://wiki.freeswitch.org/wiki/Ring_group
Best regards Peter
Rupa Schomaker schrieb:
Try:
bridge user/100@domain:_:user/101@domain:_:user/102@domain
Then document it up if it works.
On Wed, Jan 13, 2010 at 5:26 AM, Peter P GMX <Prometheus001@gmx.net <mailto:Prometheus001@gmx.net>> wrote:
Hello,
I habe the following behaviour
when I call a user which is registered twice with 2 phones via bridge user/100@domain both phones are ringing. This is correct as I allow multiple registrations in a profile
However when I call multiple endpoints via bridge user/100@domain,user/101@domain,user/102@domain only one phone with number100 is ringing.
Console log shows "Only calling the first element in the list in this mode.": 2010-01-12 19:52:18.236361 [DEBUG] switch_ivr_originate.c:1734 variable string 0 = [presence_id=100@domain] 2010-01-12 19:52:18.236361 [DEBUG] switch_ivr_originate.c:1734 variable string 1 = [transfer_fallback_extension=100] 2010-01-12 19:52:18.236361 [WARNING] switch_ivr_originate.c:2048 Only calling the first element in the list in this mode. 2010-01-12 19:52:18.236361 [NOTICE] switch_channel.c:613 New Channel sofia/internal/sip:100@10.11.12.203:2048 <http://sip:100@10.11.12.203:2048> [9b95fcdc-ffab-11de-9ba2-13b2daa7ce61]
Is there any way to work around this? I need all phones to be ringing in this scenario.
Best regards Peter
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -Rupa ------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Can you open a ticket on jira for that? By dialtone, do you mean ringback (call progress)? On Mon, Jan 18, 2010 at 5:56 AM, Peter P GMX <Prometheus001@gmx.net> wrote:
I just found out that this method unfortunately had a side effect,
when I use ":_:" the caller does not receive a dialtone If I change to "," the dialtone is there
Any clue how I can work around this?
Best regards Peter
Peter P GMX schrieb:
Thanks Rupa,
this worked. I have documented this in the wiki: http://wiki.freeswitch.org/wiki/Ring_group
Best regards Peter
Rupa Schomaker schrieb:
Try:
bridge user/100@domain:_:user/101@domain:_:user/102@domain
Then document it up if it works.
On Wed, Jan 13, 2010 at 5:26 AM, Peter P GMX <Prometheus001@gmx.net <mailto:Prometheus001@gmx.net>> wrote:
Hello,
I habe the following behaviour
when I call a user which is registered twice with 2 phones via bridge user/100@domain both phones are ringing. This is correct as I allow multiple registrations in a profile
However when I call multiple endpoints via bridge user/100@domain,user/101@domain,user/102@domain only one phone with number100 is ringing.
Console log shows "Only calling the first element in the list in this mode.": 2010-01-12 19:52:18.236361 [DEBUG] switch_ivr_originate.c:1734 variable string 0 = [presence_id=100@domain] 2010-01-12 19:52:18.236361 [DEBUG] switch_ivr_originate.c:1734 variable string 1 = [transfer_fallback_extension=100] 2010-01-12 19:52:18.236361 [WARNING] switch_ivr_originate.c:2048 Only calling the first element in the list in this mode. 2010-01-12 19:52:18.236361 [NOTICE] switch_channel.c:613 New Channel sofia/internal/sip:100@10.11.12.203:2048 <http://sip:100@10.11.12.203:2048> [9b95fcdc-ffab-11de-9ba2-13b2daa7ce61]
Is there any way to work around this? I need all phones to be ringing in this scenario.
Best regards Peter
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -Rupa ------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -Rupa
Hello Rupa, I've opened a JIRA for this. And yes, I mean ringback. Best regards Peter Rupa Schomaker schrieb:
Can you open a ticket on jira for that?
By dialtone, do you mean ringback (call progress)?
On Mon, Jan 18, 2010 at 5:56 AM, Peter P GMX <Prometheus001@gmx.net <mailto:Prometheus001@gmx.net>> wrote:
I just found out that this method unfortunately had a side effect,
when I use ":_:" the caller does not receive a dialtone If I change to "," the dialtone is there
Any clue how I can work around this?
Best regards Peter
Peter P GMX schrieb: > Thanks Rupa, > > this worked. I have documented this in the wiki: > http://wiki.freeswitch.org/wiki/Ring_group > > Best regards > Peter > > Rupa Schomaker schrieb: > >> Try: >> >> bridge user/100@domain:_:user/101@domain:_:user/102@domain >> >> Then document it up if it works. >> >> On Wed, Jan 13, 2010 at 5:26 AM, Peter P GMX <Prometheus001@gmx.net <mailto:Prometheus001@gmx.net> >> <mailto:Prometheus001@gmx.net <mailto:Prometheus001@gmx.net>>> wrote: >> >> Hello, >> >> I habe the following behaviour >> >> when I call a user which is registered twice with 2 phones via >> bridge user/100@domain >> both phones are ringing. This is correct as I allow multiple >> registrations in a profile >> >> However when I call multiple endpoints via >> bridge user/100@domain,user/101@domain,user/102@domain >> only one phone with number100 is ringing. >> >> Console log shows "Only calling the first element in the list in this >> mode.": >> 2010-01-12 19:52:18.236361 [DEBUG] switch_ivr_originate.c:1734 >> variable >> string 0 = [presence_id=100@domain] >> 2010-01-12 19:52:18.236361 [DEBUG] switch_ivr_originate.c:1734 >> variable >> string 1 = [transfer_fallback_extension=100] >> 2010-01-12 19:52:18.236361 [WARNING] switch_ivr_originate.c:2048 Only >> calling the first element in the list in this mode. >> 2010-01-12 19:52:18.236361 [NOTICE] switch_channel.c:613 New Channel >> sofia/internal/sip:100@10.11.12.203:2048 <http://sip:100@10.11.12.203:2048> >> <http://sip:100@10.11.12.203:2048> >> [9b95fcdc-ffab-11de-9ba2-13b2daa7ce61] >> >> Is there any way to work around this? I need all phones to be >> ringing in >> this scenario. >> >> Best regards >> Peter >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> >> >> >> -- >> -Rupa >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> > >
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -Rupa ------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
In this mode you'll have to set the ringback variable.. did you do that? /b On Jan 18, 2010, at 7:48 AM, Peter P GMX wrote:
Hello Rupa,
I've opened a JIRA for this. And yes, I mean ringback.
Best regards Peter
participants (3)
-
Brian West
-
Peter P GMX
-
Rupa Schomaker