Creating a separate sofia profile just for this gateway definitely works, just wondering whether there is a cleaner solution. The register-proxy params seems to do something very similar.. On Sun, Jun 21, 2009 at 1:39 PM, Jan Kubr <jan.kubr@gmail.com> wrote:

I have found this: http://jira.freeswitch.org/browse/MODENDP-184 Thanks to which I know that adding

<param name="outbound-proxy" value="78.24.13.197"/>

to the profile XML does almost what I need. Is it possible to configure outbound proxy per gateway though?

Cheers, Jan

On Sun, Jun 21, 2009 at 1:04 PM, Jan Kubr <jan.kubr@gmail.com> wrote:

...

We have a SIP gateway behind NAT which I haven't been able to set up to work with Freeswitch. The configuration I thought would work is:

<include> <gateway name="nat"> <param name="username" value="user"/> <param name="password" value="pass"/> <param name="realm" value="11.12.13.10"/> <param name="proxy" value="78.24.13.197"/> </gateway> </include>

This, however, sends

REGISTER sip:78.24.13.197;transport=udp SIP/2.0

whereas I need

REGISTER sip:11.12.13.10;transport=udp SIP/2.0

When I set "register-proxy" to the public address (78.24.13.197) and comment the "proxy" param out, it successfully registers. Though any other SIP messages are sent to 11.12.13.10 which obviously fails.

Basically what I need Freeswitch to do is to send everything to the public address, but put the private one everywhere in the SIP messages. How do I do this?

Thanks, Jan

Well when I duplicate the external profile, add <param name="outbound-proxy" value="78.24.13.197"/> to it and make the gateway configuration this: <include> <gateway name="nat"> <param name="username" value="user"/> <param name="password" value="pass"/> <param name="realm" value="11.12.13.10"/> </gateway> </include> Then it does what I need. I was just curious if I can achieve the same without creating a new profile. Jan On Sun, Jun 21, 2009 at 2:25 PM, Brian West <brian@freeswitch.org> wrote:

nobody authenticates on the request URI... you're focusing on the wrong thing... you'll need from-domain and/or from-user I suspect.

/b

On Jun 21, 2009, at 7:16 AM, Jan Kubr wrote:

...

Creating a separate sofia profile just for this gateway definitely works, just wondering whether there is a cleaner solution. The register-proxy params seems to do something very similar..

_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org