Hi Ash, It's the former. Here's a snippet from a dialplan of ours - this takes calls with a specific prefix from a specific IP address and forwards them to a particular carrier: <extension name="sample"> <condition field="network_addr" expression="^10\.1\.1\.12$" /> <condition field="destination_number" expression="^301(.*)$"> <action application="set" data="bypass_media=true" /> <action application="set" data="effective_caller_id_name=$ {caller_id_number}" /> <action application="set" data="effective_caller_id_number=$ {caller_id_number}" /> <action application="bridge" data="sofia/gateway/att/$1"/> </condition> </extension> - you'll need something similar for each direction. Cheers -- Dave

Hi,

I am interested in testing Freeswitch acting as an SBC. Is it simply a matter of configuring the dialplan correctly, using RE's so that inbound calls are just forwarded to our internal PBX and outbound calls from the PBX are forwarded to the VOIP provider?

Or do I need to create an application that specifcally creates a new call and then joins the inbound and outbound calls?

I haven't been able to find info on the wiki or google re. SBC setup.

thanks Ash _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org