Hello I browsed the wiki + archives of this list, but didn't find an article on how to add a TDM card to Freeswitch. If I've overlooked it, thank you for pointing me to it. I have a one-FXO module OpenVox PCI card. It's correctly detected by Linux CentOS 5: ======== # lspci -v 03:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device b100:0003 Flags: bus master, medium devsel, latency 64, IRQ 5 I/O ports at a000 [size=256] Memory at e2000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 ======== I've successfully compiled Freeswitch from SVN and connected to it with an SIP softphone. How do I go about adding this card to Freeswitch to handle incoming calls from the PSTN? Thank you. -- View this message in context: http://www.nabble.com/How-to-install-OpenVox-PCI-card--tp23426138p23426138.h... Sent from the Freeswitch-users mailing list archive at Nabble.com.
If I understand correctly the OpenVox card is a zaptel clone, which means you'd need to download the drivers, install them and then do the OpenZAP install. See the OpenZAP page on the wiki. -MC On Thu, May 7, 2009 at 5:46 AM, Fred-145 <codecomplete@free.fr> wrote:
Hello
I browsed the wiki + archives of this list, but didn't find an article on how to add a TDM card to Freeswitch. If I've overlooked it, thank you for pointing me to it.
I have a one-FXO module OpenVox PCI card. It's correctly detected by Linux CentOS 5:
======== # lspci -v 03:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device b100:0003 Flags: bus master, medium devsel, latency 64, IRQ 5 I/O ports at a000 [size=256] Memory at e2000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 ========
I've successfully compiled Freeswitch from SVN and connected to it with an SIP softphone.
How do I go about adding this card to Freeswitch to handle incoming calls from the PSTN?
Thank you. -- View this message in context: http://www.nabble.com/How-to-install-OpenVox-PCI-card--tp23426138p23426138.h... Sent from the Freeswitch-users mailing list archive at Nabble.com.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
mercutioviz wrote:
If I understand correctly the OpenVox card is a zaptel clone, which means you'd need to download the drivers, install them and then do the OpenZAP install. See the OpenZAP page on the wiki.
Thanks for the tip. I'll give it a shot. In the mean time, I'm interested in feedback from people who use a TDM card with Zaptel + OpenZap + FS in production : Is it stable, professional-grade quality? -- View this message in context: http://www.nabble.com/How-to-install-OpenVox-PCI-card--tp23426138p23430550.h... Sent from the Freeswitch-users mailing list archive at Nabble.com.
On Thu, May 7, 2009 at 9:26 AM, Fred-145 <codecomplete@free.fr> wrote:
mercutioviz wrote:
If I understand correctly the OpenVox card is a zaptel clone, which means you'd need to download the drivers, install them and then do the OpenZAP install. See the OpenZAP page on the wiki.
Thanks for the tip. I'll give it a shot. In the mean time, I'm interested in feedback from people who use a TDM card with Zaptel + OpenZap + FS in production : Is it stable, professional-grade quality?
Yes, there are a number of people who are using TDM in production. If you're just using an FXO card you should be just fine. If you are using PRI then you might want to use ozmod_libpri but that's a whole different discussion. :) -MC
I have installed from the 1.0.4pre7 tarball on a openSuse 11.1. Why is it that after I launch freeswitch and type in either 'show' or 'status' at the console, it responds with 'Unknown command', but it does accept 'shutdown'? Thanks, Lars
Its just "status" Also please do not hijack threads.. Click new message and input the address freeswitch-users@lists.freeswitch.org Thanks, Brian On May 7, 2009, at 8:13 PM, Lars Zeb wrote:
I have installed from the 1.0.4pre7 tarball on a openSuse 11.1.
Why is it that after I launch freeswitch and type in either 'show' or 'status' at the console, it responds with 'Unknown command', but it does accept 'shutdown'?
Thanks, Lars
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Brian West brian@freeswitch.org -- Meet us at ClueCon! http://www.cluecon.com
Sorry for the hijacking, too anxious. I typed only one of the two commands - both Unknown. 2009-05-07 17:52:52 [CONSOLE] switch_core.c:1322 switch_core_init_and_modload() FreeSWITCH Version 1.0.4pre7 (13238M) Started. Crash Protection [Disabled] Max Sessions[1000] Session Rate[30] SQL [Enabled] freeswitch@fs> show Unknown Command: show freeswitch@fs> status Unknown Command: status From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West Sent: Thursday, May 07, 2009 6:20 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question Its just "status" Also please do not hijack threads.. Click new message and input the address freeswitch-users@lists.freeswitch.org Thanks, Brian On May 7, 2009, at 8:13 PM, Lars Zeb wrote: I have installed from the 1.0.4pre7 tarball on a openSuse 11.1. Why is it that after I launch freeswitch and type in either 'show' or 'status' at the console, it responds with 'Unknown command', but it does accept 'shutdown'? Thanks, Lars _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org Brian West brian@freeswitch.org -- Meet us at ClueCon! http://www.cluecon.com <http://www.cluecon.com/>
Weird did you modify anything in modules.conf? /b On May 7, 2009, at 9:01 PM, Lars Zeb wrote:
Sorry for the hijacking, too anxious.
I typed only one of the two commands – both Unknown.
2009-05-07 17:52:52 [CONSOLE] switch_core.c:1322 switch_core_init_and_modload() FreeSWITCH Version 1.0.4pre7 (13238M) Started. Crash Protection [Disabled] Max Sessions[1000] Session Rate[30] SQL [Enabled] freeswitch@fs> show Unknown Command: show freeswitch@fs> status Unknown Command: status
Brian West brian@freeswitch.org -- Meet us at ClueCon! http://www.cluecon.com
Check out the wiki for more info. Wiki.FreeSWITCH.org On Thursday, May 7, 2009, Lars Zeb <larclap@yahoo.com> wrote:
I have installed from the 1.0.4pre7 tarball on a openSuse 11.1.
Why is it that after I launch freeswitch and type in either 'show' or 'status' at the console, it responds with 'Unknown command', but it does accept 'shutdown'?
Thanks, Lars
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Shannon
Lars Zeb <larclap@yahoo.com> wrote:
I have installed from the 1.0.4pre7 tarball on a openSuse 11.1.
Why is it that after I launch freeswitch and type in either 'show' or 'status' at the console, it responds with 'Unknown command', but it does accept 'shutdown'?
Maybe the mod_commands module wasn't loaded. Check your logs, and try "load mod_commands" from the FreeSWITCH console. That module should have been loaded unless there is something seriously wrong with the build or installation process.
In launching freeswitch, I noticed the errors below, plus many more I did not copy here. Also the mod directory had only two modules in it, so I rebuilt from the tarball again. Same results. I did ./configure, make and make install. What have I done wrong? Thanks, Lars 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_console.so **/usr/local/freeswitch/mod/mod_console.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_logfile.so **/usr/local/freeswitch/mod/mod_logfile.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_enum.so **/usr/local/freeswitch/mod/mod_enum.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:314 load_config() Adding default template. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template sql. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template example. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template snom. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template linksys. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template asterisk. 2009-05-08 05:52:32 [CONSOLE] switch_loadable_module.c:889 switch_loadable_module_load_file() Successfully Loaded [mod_cdr_csv] 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_event_socket.so **/usr/local/freeswitch/mod/mod_event_socket.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_sofia.so **/usr/local/freeswitch/mod/mod_sofia.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_loopback.so **/usr/local/freeswitch/mod/mod_loopback.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_commands.so **/usr/local/freeswitch/mod/mod_commands.so: cannot open shared object file: No such file or directory** ... FreeSWITCH Version 1.0.4pre7 (13238M) Started. Crash Protection [Disabled] Max Sessions[1000] Session Rate[30] SQL [Enabled] fs:/usr/local/freeswitch/mod # l total 104 drwxr-xr-x 2 root root 4096 2009-05-08 06:23 ./ drwxr-xr-x 13 root root 4096 2009-05-08 06:23 ../ -rwxr-xr-x 1 root root 37098 2009-05-08 06:23 mod_amr.so* -rwxr-xr-x 1 root root 52950 2009-05-08 06:23 mod_cdr_csv.so* make[5]: *** [mod_cluechoo.lo] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_cluechoo-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Making install in build +-------- FreeSWITCH install Complete ----------+ + FreeSWITCH has been successfully installed. + + + ... + + +-----------------------------------------------+ make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2 -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jason White Sent: Thursday, May 07, 2009 6:25 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question Lars Zeb <larclap@yahoo.com> wrote:
I have installed from the 1.0.4pre7 tarball on a openSuse 11.1.
Why is it that after I launch freeswitch and type in either 'show' or 'status' at the console, it responds with 'Unknown command', but it does accept 'shutdown'?
Maybe the mod_commands module wasn't loaded. Check your logs, and try "load mod_commands" from the FreeSWITCH console. That module should have been loaded unless there is something seriously wrong with the build or installation process. _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Lars, May I suggest this process: make clean && svn up && ./bootstrap.sh && ./configure && make install It's one step less intensive than starting with a fresh checkout. I just did that on four systems last night that all had a buggy build with cluechoo and file_string and now all four are humming along nicely. -MC On Fri, May 8, 2009 at 6:54 AM, Lars Zeb <larclap@yahoo.com> wrote:
In launching freeswitch, I noticed the errors below, plus many more I did not copy here. Also the mod directory had only two modules in it, so I rebuilt from the tarball again. Same results.
I did ./configure, make and make install. What have I done wrong?
Thanks, Lars
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_console.so **/usr/local/freeswitch/mod/mod_console.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_logfile.so **/usr/local/freeswitch/mod/mod_logfile.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_enum.so **/usr/local/freeswitch/mod/mod_enum.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:314 load_config() Adding default template. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template sql. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template example. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template snom. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template linksys. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template asterisk. 2009-05-08 05:52:32 [CONSOLE] switch_loadable_module.c:889 switch_loadable_module_load_file() Successfully Loaded [mod_cdr_csv] 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_event_socket.so **/usr/local/freeswitch/mod/mod_event_socket.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_sofia.so **/usr/local/freeswitch/mod/mod_sofia.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_loopback.so **/usr/local/freeswitch/mod/mod_loopback.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_commands.so **/usr/local/freeswitch/mod/mod_commands.so: cannot open shared object file: No such file or directory** ... FreeSWITCH Version 1.0.4pre7 (13238M) Started. Crash Protection [Disabled] Max Sessions[1000] Session Rate[30] SQL [Enabled]
fs:/usr/local/freeswitch/mod # l total 104 drwxr-xr-x 2 root root 4096 2009-05-08 06:23 ./ drwxr-xr-x 13 root root 4096 2009-05-08 06:23 ../ -rwxr-xr-x 1 root root 37098 2009-05-08 06:23 mod_amr.so* -rwxr-xr-x 1 root root 52950 2009-05-08 06:23 mod_cdr_csv.so*
make[5]: *** [mod_cluechoo.lo] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_cluechoo-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2
Making install in build +-------- FreeSWITCH install Complete ----------+ + FreeSWITCH has been successfully installed. + + + ... + + +-----------------------------------------------+ make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jason White Sent: Thursday, May 07, 2009 6:25 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question
Lars Zeb <larclap@yahoo.com> wrote:
I have installed from the 1.0.4pre7 tarball on a openSuse 11.1.
Why is it that after I launch freeswitch and type in either 'show' or 'status' at the console, it responds with 'Unknown command', but it does accept 'shutdown'?
Maybe the mod_commands module wasn't loaded. Check your logs, and try "load mod_commands" from the FreeSWITCH console.
That module should have been loaded unless there is something seriously wrong with the build or installation process.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
The mod modules are still not built. I tried with your suggestion. making install mod_cluechoo Compiling mod_cluechoo.c... quiet_libtool: compile: gcc -I/usr/src/freeswitch/src/include -I/usr/src/freeswitch/libs/libteletone/src -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -g -O2 -Wall -std=c99 -pedantic -D_GNU_SOURCE -DHAVE_CONFIG_H -c mod_cluechoo.c -fPIC -DPIC -o .libs/mod_cluechoo.o cc1: warnings being treated as errors mod_cluechoo.c: In function 'go': mod_cluechoo.c:188: error: call to function 'add_D51' without a real prototype mod_cluechoo.c:45: note: 'add_D51' was declared here mod_cluechoo.c:190: error: call to function 'add_sl' without a real prototype mod_cluechoo.c:46: note: 'add_sl' was declared here mod_cluechoo.c: In function 'vgo': mod_cluechoo.c:313: error: call to function 'add_D51' without a real prototype mod_cluechoo.c:45: note: 'add_D51' was declared here mod_cluechoo.c:315: error: call to function 'add_sl' without a real prototype mod_cluechoo.c:46: note: 'add_sl' was declared here mod_cluechoo.c: In function 'add_sl': mod_cluechoo.c:369: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:370: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:370: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:371: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:371: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:373: error: call to function 'add_smoke' without a real prototype mod_cluechoo.c:48: note: 'add_smoke' was declared here mod_cluechoo.c: In function 'add_D51': mod_cluechoo.c:419: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:420: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:422: error: call to function 'add_smoke' without a real prototype mod_cluechoo.c:48: note: 'add_smoke' was declared here make[5]: *** [mod_cluechoo.lo] Error 1 make[4]: *** [install] Error 1 make[3]: *** [mod_cluechoo-install] Error 1 make[2]: *** [install-recursive] Error 1 Making install in build +-------- FreeSWITCH install Complete ----------+ + FreeSWITCH has been successfully installed. + + + + Install sounds: + + (uhd-sounds includes hd-sounds, sounds) + + (hd-sounds includes sounds) + + . + +-----------------------------------------------+ make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2 From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins Sent: Friday, May 08, 2009 8:30 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question Lars, May I suggest this process: make clean && svn up && ./bootstrap.sh && ./configure && make install It's one step less intensive than starting with a fresh checkout. I just did that on four systems last night that all had a buggy build with cluechoo and file_string and now all four are humming along nicely. -MC On Fri, May 8, 2009 at 6:54 AM, Lars Zeb <larclap@yahoo.com> wrote: In launching freeswitch, I noticed the errors below, plus many more I did not copy here. Also the mod directory had only two modules in it, so I rebuilt from the tarball again. Same results. I did ./configure, make and make install. What have I done wrong? Thanks, Lars 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_console.so **/usr/local/freeswitch/mod/mod_console.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_logfile.so **/usr/local/freeswitch/mod/mod_logfile.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_enum.so **/usr/local/freeswitch/mod/mod_enum.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:314 load_config() Adding default template. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template sql. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template example. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template snom. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template linksys. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template asterisk. 2009-05-08 05:52:32 [CONSOLE] switch_loadable_module.c:889 switch_loadable_module_load_file() Successfully Loaded [mod_cdr_csv] 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_event_socket.so **/usr/local/freeswitch/mod/mod_event_socket.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_sofia.so **/usr/local/freeswitch/mod/mod_sofia.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_loopback.so **/usr/local/freeswitch/mod/mod_loopback.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_commands.so **/usr/local/freeswitch/mod/mod_commands.so: cannot open shared object file: No such file or directory** ... FreeSWITCH Version 1.0.4pre7 (13238M) Started. Crash Protection [Disabled] Max Sessions[1000] Session Rate[30] SQL [Enabled] fs:/usr/local/freeswitch/mod # l total 104 drwxr-xr-x 2 root root 4096 2009-05-08 06:23 ./ drwxr-xr-x 13 root root 4096 2009-05-08 06:23 ../ -rwxr-xr-x 1 root root 37098 2009-05-08 06:23 mod_amr.so* -rwxr-xr-x 1 root root 52950 2009-05-08 06:23 mod_cdr_csv.so* make[5]: *** [mod_cluechoo.lo] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_cluechoo-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Making install in build +-------- FreeSWITCH install Complete ----------+ + FreeSWITCH has been successfully installed. + + + ... + + +-----------------------------------------------+ make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2 -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jason White Sent: Thursday, May 07, 2009 6:25 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question Lars Zeb <larclap@yahoo.com> wrote:
I have installed from the 1.0.4pre7 tarball on a openSuse 11.1.
Why is it that after I launch freeswitch and type in either 'show' or 'status' at the console, it responds with 'Unknown command', but it does accept 'shutdown'?
Maybe the mod_commands module wasn't loaded. Check your logs, and try "load mod_commands" from the FreeSWITCH console. That module should have been loaded unless there is something seriously wrong with the build or installation process. _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Okay, time for a fresh checkout. If you are on Linux then I recommend that you completely "rm -fr" your freeswitch source directory, then do the quick and dirty install: http://wiki.freeswitch.org/wiki/Quick_and_Dirty_Install Let us know if that works... -MC On Fri, May 8, 2009 at 10:20 AM, Lars Zeb <larclap@yahoo.com> wrote:
The mod modules are still not built. I tried with your suggestion.
making install mod_cluechoo
Compiling mod_cluechoo.c...
quiet_libtool: compile: gcc -I/usr/src/freeswitch/src/include -I/usr/src/freeswitch/libs/libteletone/src -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -g -O2 -Wall -std=c99 -pedantic -D_GNU_SOURCE -DHAVE_CONFIG_H -c mod_cluechoo.c -fPIC -DPIC -o .libs/mod_cluechoo.o
cc1: warnings being treated as errors
mod_cluechoo.c: In function ‘go’:
mod_cluechoo.c:188: error: call to function ‘add_D51’ without a real prototype
mod_cluechoo.c:45: note: ‘add_D51’ was declared here
mod_cluechoo.c:190: error: call to function ‘add_sl’ without a real prototype
mod_cluechoo.c:46: note: ‘add_sl’ was declared here
mod_cluechoo.c: In function ‘vgo’:
mod_cluechoo.c:313: error: call to function ‘add_D51’ without a real prototype
mod_cluechoo.c:45: note: ‘add_D51’ was declared here
mod_cluechoo.c:315: error: call to function ‘add_sl’ without a real prototype
mod_cluechoo.c:46: note: ‘add_sl’ was declared here
mod_cluechoo.c: In function ‘add_sl’:
mod_cluechoo.c:369: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:370: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:370: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:371: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:371: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:373: error: call to function ‘add_smoke’ without a real prototype
mod_cluechoo.c:48: note: ‘add_smoke’ was declared here
mod_cluechoo.c: In function ‘add_D51’:
mod_cluechoo.c:419: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:420: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:422: error: call to function ‘add_smoke’ without a real prototype
mod_cluechoo.c:48: note: ‘add_smoke’ was declared here
make[5]: *** [mod_cluechoo.lo] Error 1
make[4]: *** [install] Error 1
make[3]: *** [mod_cluechoo-install] Error 1
make[2]: *** [install-recursive] Error 1
Making install in build
+-------- FreeSWITCH install Complete ----------+
+ FreeSWITCH has been successfully installed. +
+ +
+ Install sounds: +
+ (uhd-sounds includes hd-sounds, sounds) +
+ (hd-sounds includes sounds) +
+ … +
+-----------------------------------------------+
make[1]: *** [install-recursive] Error 1
make: *** [install] Error 2
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Michael Collins *Sent:* Friday, May 08, 2009 8:30 AM
*To:* freeswitch-users@lists.freeswitch.org *Subject:* Re: [Freeswitch-users] Total noob question
Lars,
May I suggest this process:
make clean && svn up && ./bootstrap.sh && ./configure && make install
It's one step less intensive than starting with a fresh checkout. I just did that on four systems last night that all had a buggy build with cluechoo and file_string and now all four are humming along nicely.
-MC
On Fri, May 8, 2009 at 6:54 AM, Lars Zeb <larclap@yahoo.com> wrote:
In launching freeswitch, I noticed the errors below, plus many more I did not copy here. Also the mod directory had only two modules in it, so I rebuilt from the tarball again. Same results.
I did ./configure, make and make install. What have I done wrong?
Thanks, Lars
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_console.so **/usr/local/freeswitch/mod/mod_console.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_logfile.so **/usr/local/freeswitch/mod/mod_logfile.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_enum.so **/usr/local/freeswitch/mod/mod_enum.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:314 load_config() Adding default template. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template sql. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template example. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template snom. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template linksys. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template asterisk. 2009-05-08 05:52:32 [CONSOLE] switch_loadable_module.c:889 switch_loadable_module_load_file() Successfully Loaded [mod_cdr_csv] 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_event_socket.so **/usr/local/freeswitch/mod/mod_event_socket.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_sofia.so **/usr/local/freeswitch/mod/mod_sofia.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_loopback.so **/usr/local/freeswitch/mod/mod_loopback.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_commands.so **/usr/local/freeswitch/mod/mod_commands.so: cannot open shared object file: No such file or directory** ...
FreeSWITCH Version 1.0.4pre7 (13238M) Started. Crash Protection [Disabled] Max Sessions[1000] Session Rate[30] SQL [Enabled]
fs:/usr/local/freeswitch/mod # l total 104 drwxr-xr-x 2 root root 4096 2009-05-08 06:23 ./ drwxr-xr-x 13 root root 4096 2009-05-08 06:23 ../ -rwxr-xr-x 1 root root 37098 2009-05-08 06:23 mod_amr.so* -rwxr-xr-x 1 root root 52950 2009-05-08 06:23 mod_cdr_csv.so*
make[5]: *** [mod_cluechoo.lo] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_cluechoo-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2
Making install in build +-------- FreeSWITCH install Complete ----------+ + FreeSWITCH has been successfully installed. + + + ... + + +-----------------------------------------------+ make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org
[mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jason White Sent: Thursday, May 07, 2009 6:25 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question
Lars Zeb <larclap@yahoo.com> wrote:
I have installed from the 1.0.4pre7 tarball on a openSuse 11.1.
Why is it that after I launch freeswitch and type in either 'show' or 'status' at the console, it responds with 'Unknown command', but it does accept 'shutdown'?
Maybe the mod_commands module wasn't loaded. Check your logs, and try "load mod_commands" from the FreeSWITCH console.
That module should have been loaded unless there is something seriously wrong with the build or installation process.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Sorry to report that the results are the same. I executed the 'make' command after the 'wget' and captured stderr and stdout to a file. I uploaded it to http://rapidshare.com/files/230726648/openSuse_11.1_Freeswitch-1.0.4pre7_log .zip.html if it's of any use. The mod_cluechoo errors persist. The only mods in the mod folder are mod_amr.(la & so) and mod-cdr_csv.(la & so). Maybe I should swap another OS. I'm willing to try anything to get freeswitch up. From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins Sent: Friday, May 08, 2009 10:26 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question Okay, time for a fresh checkout. If you are on Linux then I recommend that you completely "rm -fr" your freeswitch source directory, then do the quick and dirty install: http://wiki.freeswitch.org/wiki/Quick_and_Dirty_Install Let us know if that works... -MC On Fri, May 8, 2009 at 10:20 AM, Lars Zeb <larclap@yahoo.com> wrote: The mod modules are still not built. I tried with your suggestion. making install mod_cluechoo Compiling mod_cluechoo.c... quiet_libtool: compile: gcc -I/usr/src/freeswitch/src/include -I/usr/src/freeswitch/libs/libteletone/src -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -g -O2 -Wall -std=c99 -pedantic -D_GNU_SOURCE -DHAVE_CONFIG_H -c mod_cluechoo.c -fPIC -DPIC -o .libs/mod_cluechoo.o cc1: warnings being treated as errors mod_cluechoo.c: In function 'go': mod_cluechoo.c:188: error: call to function 'add_D51' without a real prototype mod_cluechoo.c:45: note: 'add_D51' was declared here mod_cluechoo.c:190: error: call to function 'add_sl' without a real prototype mod_cluechoo.c:46: note: 'add_sl' was declared here mod_cluechoo.c: In function 'vgo': mod_cluechoo.c:313: error: call to function 'add_D51' without a real prototype mod_cluechoo.c:45: note: 'add_D51' was declared here mod_cluechoo.c:315: error: call to function 'add_sl' without a real prototype mod_cluechoo.c:46: note: 'add_sl' was declared here mod_cluechoo.c: In function 'add_sl': mod_cluechoo.c:369: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:370: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:370: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:371: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:371: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:373: error: call to function 'add_smoke' without a real prototype mod_cluechoo.c:48: note: 'add_smoke' was declared here mod_cluechoo.c: In function 'add_D51': mod_cluechoo.c:419: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:420: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:422: error: call to function 'add_smoke' without a real prototype mod_cluechoo.c:48: note: 'add_smoke' was declared here make[5]: *** [mod_cluechoo.lo] Error 1 make[4]: *** [install] Error 1 make[3]: *** [mod_cluechoo-install] Error 1 make[2]: *** [install-recursive] Error 1 Making install in build +-------- FreeSWITCH install Complete ----------+ + FreeSWITCH has been successfully installed. + + + + Install sounds: + + (uhd-sounds includes hd-sounds, sounds) + + (hd-sounds includes sounds) + + . + +-----------------------------------------------+ make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2 From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins Sent: Friday, May 08, 2009 8:30 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question Lars, May I suggest this process: make clean && svn up && ./bootstrap.sh && ./configure && make install It's one step less intensive than starting with a fresh checkout. I just did that on four systems last night that all had a buggy build with cluechoo and file_string and now all four are humming along nicely. -MC On Fri, May 8, 2009 at 6:54 AM, Lars Zeb <larclap@yahoo.com> wrote: In launching freeswitch, I noticed the errors below, plus many more I did not copy here. Also the mod directory had only two modules in it, so I rebuilt from the tarball again. Same results. I did ./configure, make and make install. What have I done wrong? Thanks, Lars 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_console.so **/usr/local/freeswitch/mod/mod_console.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_logfile.so **/usr/local/freeswitch/mod/mod_logfile.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_enum.so **/usr/local/freeswitch/mod/mod_enum.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:314 load_config() Adding default template. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template sql. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template example. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template snom. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template linksys. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template asterisk. 2009-05-08 05:52:32 [CONSOLE] switch_loadable_module.c:889 switch_loadable_module_load_file() Successfully Loaded [mod_cdr_csv] 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_event_socket.so **/usr/local/freeswitch/mod/mod_event_socket.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_sofia.so **/usr/local/freeswitch/mod/mod_sofia.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_loopback.so **/usr/local/freeswitch/mod/mod_loopback.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_commands.so **/usr/local/freeswitch/mod/mod_commands.so: cannot open shared object file: No such file or directory** ... FreeSWITCH Version 1.0.4pre7 (13238M) Started. Crash Protection [Disabled] Max Sessions[1000] Session Rate[30] SQL [Enabled] fs:/usr/local/freeswitch/mod # l total 104 drwxr-xr-x 2 root root 4096 2009-05-08 06:23 ./ drwxr-xr-x 13 root root 4096 2009-05-08 06:23 ../ -rwxr-xr-x 1 root root 37098 2009-05-08 06:23 mod_amr.so* -rwxr-xr-x 1 root root 52950 2009-05-08 06:23 mod_cdr_csv.so* make[5]: *** [mod_cluechoo.lo] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_cluechoo-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Making install in build +-------- FreeSWITCH install Complete ----------+ + FreeSWITCH has been successfully installed. + + + ... + + +-----------------------------------------------+ make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2 -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jason White Sent: Thursday, May 07, 2009 6:25 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question Lars Zeb <larclap@yahoo.com> wrote:
I have installed from the 1.0.4pre7 tarball on a openSuse 11.1.
Why is it that after I launch freeswitch and type in either 'show' or 'status' at the console, it responds with 'Unknown command', but it does accept 'shutdown'?
Maybe the mod_commands module wasn't loaded. Check your logs, and try "load mod_commands" from the FreeSWITCH console. That module should have been loaded unless there is something seriously wrong with the build or installation process. _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Well, Tony likes to say that you can compile FreeSWITCH anywhere but he only supports it if the name of the OS rhymes with Mentos. :) We have had much success with CentOS 5.x installs. I can highly recommend it. -MC On Fri, May 8, 2009 at 1:46 PM, Lars Zeb <larclap@yahoo.com> wrote:
Sorry to report that the results are the same. I executed the ‘make’ command after the ‘wget’ and captured stderr and stdout to a file. I uploaded it to http://rapidshare.com/files/230726648/openSuse_11.1_Freeswitch-1.0.4pre7_log... it’s of any use.
The mod_cluechoo errors persist. The only mods in the mod folder are mod_amr.(la & so) and mod-cdr_csv.(la & so).
Maybe I should swap another OS. I’m willing to try anything to get freeswitch up.
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Michael Collins *Sent:* Friday, May 08, 2009 10:26 AM
*To:* freeswitch-users@lists.freeswitch.org *Subject:* Re: [Freeswitch-users] Total noob question
Okay, time for a fresh checkout. If you are on Linux then I recommend that you completely "rm -fr" your freeswitch source directory, then do the quick and dirty install:
http://wiki.freeswitch.org/wiki/Quick_and_Dirty_Install
Let us know if that works... -MC
On Fri, May 8, 2009 at 10:20 AM, Lars Zeb <larclap@yahoo.com> wrote:
The mod modules are still not built. I tried with your suggestion.
making install mod_cluechoo
Compiling mod_cluechoo.c...
quiet_libtool: compile: gcc -I/usr/src/freeswitch/src/include -I/usr/src/freeswitch/libs/libteletone/src -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -g -O2 -Wall -std=c99 -pedantic -D_GNU_SOURCE -DHAVE_CONFIG_H -c mod_cluechoo.c -fPIC -DPIC -o .libs/mod_cluechoo.o
cc1: warnings being treated as errors
mod_cluechoo.c: In function ‘go’:
mod_cluechoo.c:188: error: call to function ‘add_D51’ without a real prototype
mod_cluechoo.c:45: note: ‘add_D51’ was declared here
mod_cluechoo.c:190: error: call to function ‘add_sl’ without a real prototype
mod_cluechoo.c:46: note: ‘add_sl’ was declared here
mod_cluechoo.c: In function ‘vgo’:
mod_cluechoo.c:313: error: call to function ‘add_D51’ without a real prototype
mod_cluechoo.c:45: note: ‘add_D51’ was declared here
mod_cluechoo.c:315: error: call to function ‘add_sl’ without a real prototype
mod_cluechoo.c:46: note: ‘add_sl’ was declared here
mod_cluechoo.c: In function ‘add_sl’:
mod_cluechoo.c:369: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:370: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:370: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:371: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:371: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:373: error: call to function ‘add_smoke’ without a real prototype
mod_cluechoo.c:48: note: ‘add_smoke’ was declared here
mod_cluechoo.c: In function ‘add_D51’:
mod_cluechoo.c:419: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:420: error: call to function ‘add_man’ without a real prototype
mod_cluechoo.c:47: note: ‘add_man’ was declared here
mod_cluechoo.c:422: error: call to function ‘add_smoke’ without a real prototype
mod_cluechoo.c:48: note: ‘add_smoke’ was declared here
make[5]: *** [mod_cluechoo.lo] Error 1
make[4]: *** [install] Error 1
make[3]: *** [mod_cluechoo-install] Error 1
make[2]: *** [install-recursive] Error 1
Making install in build
+-------- FreeSWITCH install Complete ----------+
+ FreeSWITCH has been successfully installed. +
+ +
+ Install sounds: +
+ (uhd-sounds includes hd-sounds, sounds) +
+ (hd-sounds includes sounds) +
+ … +
+-----------------------------------------------+
make[1]: *** [install-recursive] Error 1
make: *** [install] Error 2
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Michael Collins *Sent:* Friday, May 08, 2009 8:30 AM
*To:* freeswitch-users@lists.freeswitch.org *Subject:* Re: [Freeswitch-users] Total noob question
Lars,
May I suggest this process:
make clean && svn up && ./bootstrap.sh && ./configure && make install
It's one step less intensive than starting with a fresh checkout. I just did that on four systems last night that all had a buggy build with cluechoo and file_string and now all four are humming along nicely.
-MC
On Fri, May 8, 2009 at 6:54 AM, Lars Zeb <larclap@yahoo.com> wrote:
In launching freeswitch, I noticed the errors below, plus many more I did not copy here. Also the mod directory had only two modules in it, so I rebuilt from the tarball again. Same results.
I did ./configure, make and make install. What have I done wrong?
Thanks, Lars
2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_console.so **/usr/local/freeswitch/mod/mod_console.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_logfile.so **/usr/local/freeswitch/mod/mod_logfile.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_enum.so **/usr/local/freeswitch/mod/mod_enum.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:314 load_config() Adding default template. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template sql. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template example. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template snom. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template linksys. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template asterisk. 2009-05-08 05:52:32 [CONSOLE] switch_loadable_module.c:889 switch_loadable_module_load_file() Successfully Loaded [mod_cdr_csv] 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_event_socket.so **/usr/local/freeswitch/mod/mod_event_socket.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_sofia.so **/usr/local/freeswitch/mod/mod_sofia.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_loopback.so **/usr/local/freeswitch/mod/mod_loopback.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_commands.so **/usr/local/freeswitch/mod/mod_commands.so: cannot open shared object file: No such file or directory** ...
FreeSWITCH Version 1.0.4pre7 (13238M) Started. Crash Protection [Disabled] Max Sessions[1000] Session Rate[30] SQL [Enabled]
fs:/usr/local/freeswitch/mod # l total 104 drwxr-xr-x 2 root root 4096 2009-05-08 06:23 ./ drwxr-xr-x 13 root root 4096 2009-05-08 06:23 ../ -rwxr-xr-x 1 root root 37098 2009-05-08 06:23 mod_amr.so* -rwxr-xr-x 1 root root 52950 2009-05-08 06:23 mod_cdr_csv.so*
make[5]: *** [mod_cluechoo.lo] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_cluechoo-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2
Making install in build +-------- FreeSWITCH install Complete ----------+ + FreeSWITCH has been successfully installed. + + + ... + + +-----------------------------------------------+ make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org
[mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jason White Sent: Thursday, May 07, 2009 6:25 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question
Lars Zeb <larclap@yahoo.com> wrote:
I have installed from the 1.0.4pre7 tarball on a openSuse 11.1.
Why is it that after I launch freeswitch and type in either 'show' or 'status' at the console, it responds with 'Unknown command', but it does accept 'shutdown'?
Maybe the mod_commands module wasn't loaded. Check your logs, and try "load mod_commands" from the FreeSWITCH console.
That module should have been loaded unless there is something seriously wrong with the build or installation process.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks, Michael, CentOS worked like a charm. From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins Sent: Friday, May 08, 2009 2:01 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question Well, Tony likes to say that you can compile FreeSWITCH anywhere but he only supports it if the name of the OS rhymes with Mentos. :) We have had much success with CentOS 5.x installs. I can highly recommend it. -MC On Fri, May 8, 2009 at 1:46 PM, Lars Zeb <larclap@yahoo.com> wrote: Sorry to report that the results are the same. I executed the 'make' command after the 'wget' and captured stderr and stdout to a file. I uploaded it to http://rapidshare.com/files/230726648/openSuse_11.1_Freeswitch-1.0.4pre7_log .zip.html if it's of any use. The mod_cluechoo errors persist. The only mods in the mod folder are mod_amr.(la & so) and mod-cdr_csv.(la & so). Maybe I should swap another OS. I'm willing to try anything to get freeswitch up. From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins Sent: Friday, May 08, 2009 10:26 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question Okay, time for a fresh checkout. If you are on Linux then I recommend that you completely "rm -fr" your freeswitch source directory, then do the quick and dirty install: http://wiki.freeswitch.org/wiki/Quick_and_Dirty_Install Let us know if that works... -MC On Fri, May 8, 2009 at 10:20 AM, Lars Zeb <larclap@yahoo.com> wrote: The mod modules are still not built. I tried with your suggestion. making install mod_cluechoo Compiling mod_cluechoo.c... quiet_libtool: compile: gcc -I/usr/src/freeswitch/src/include -I/usr/src/freeswitch/libs/libteletone/src -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -g -O2 -Wall -std=c99 -pedantic -D_GNU_SOURCE -DHAVE_CONFIG_H -c mod_cluechoo.c -fPIC -DPIC -o .libs/mod_cluechoo.o cc1: warnings being treated as errors mod_cluechoo.c: In function 'go': mod_cluechoo.c:188: error: call to function 'add_D51' without a real prototype mod_cluechoo.c:45: note: 'add_D51' was declared here mod_cluechoo.c:190: error: call to function 'add_sl' without a real prototype mod_cluechoo.c:46: note: 'add_sl' was declared here mod_cluechoo.c: In function 'vgo': mod_cluechoo.c:313: error: call to function 'add_D51' without a real prototype mod_cluechoo.c:45: note: 'add_D51' was declared here mod_cluechoo.c:315: error: call to function 'add_sl' without a real prototype mod_cluechoo.c:46: note: 'add_sl' was declared here mod_cluechoo.c: In function 'add_sl': mod_cluechoo.c:369: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:370: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:370: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:371: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:371: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:373: error: call to function 'add_smoke' without a real prototype mod_cluechoo.c:48: note: 'add_smoke' was declared here mod_cluechoo.c: In function 'add_D51': mod_cluechoo.c:419: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:420: error: call to function 'add_man' without a real prototype mod_cluechoo.c:47: note: 'add_man' was declared here mod_cluechoo.c:422: error: call to function 'add_smoke' without a real prototype mod_cluechoo.c:48: note: 'add_smoke' was declared here make[5]: *** [mod_cluechoo.lo] Error 1 make[4]: *** [install] Error 1 make[3]: *** [mod_cluechoo-install] Error 1 make[2]: *** [install-recursive] Error 1 Making install in build +-------- FreeSWITCH install Complete ----------+ + FreeSWITCH has been successfully installed. + + + + Install sounds: + + (uhd-sounds includes hd-sounds, sounds) + + (hd-sounds includes sounds) + + . + +-----------------------------------------------+ make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2 From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins Sent: Friday, May 08, 2009 8:30 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question Lars, May I suggest this process: make clean && svn up && ./bootstrap.sh && ./configure && make install It's one step less intensive than starting with a fresh checkout. I just did that on four systems last night that all had a buggy build with cluechoo and file_string and now all four are humming along nicely. -MC On Fri, May 8, 2009 at 6:54 AM, Lars Zeb <larclap@yahoo.com> wrote: In launching freeswitch, I noticed the errors below, plus many more I did not copy here. Also the mod directory had only two modules in it, so I rebuilt from the tarball again. Same results. I did ./configure, make and make install. What have I done wrong? Thanks, Lars 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_console.so **/usr/local/freeswitch/mod/mod_console.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_logfile.so **/usr/local/freeswitch/mod/mod_logfile.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_enum.so **/usr/local/freeswitch/mod/mod_enum.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:314 load_config() Adding default template. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template sql. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template example. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template snom. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template linksys. 2009-05-08 05:52:32 [DEBUG] mod_cdr_csv.c:359 load_config() Adding template asterisk. 2009-05-08 05:52:32 [CONSOLE] switch_loadable_module.c:889 switch_loadable_module_load_file() Successfully Loaded [mod_cdr_csv] 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_event_socket.so **/usr/local/freeswitch/mod/mod_event_socket.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_sofia.so **/usr/local/freeswitch/mod/mod_sofia.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_loopback.so **/usr/local/freeswitch/mod/mod_loopback.so: cannot open shared object file: No such file or directory** 2009-05-08 05:52:32 [CRIT] switch_loadable_module.c:871 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_commands.so **/usr/local/freeswitch/mod/mod_commands.so: cannot open shared object file: No such file or directory** ... FreeSWITCH Version 1.0.4pre7 (13238M) Started. Crash Protection [Disabled] Max Sessions[1000] Session Rate[30] SQL [Enabled] fs:/usr/local/freeswitch/mod # l total 104 drwxr-xr-x 2 root root 4096 2009-05-08 06:23 ./ drwxr-xr-x 13 root root 4096 2009-05-08 06:23 ../ -rwxr-xr-x 1 root root 37098 2009-05-08 06:23 mod_amr.so* -rwxr-xr-x 1 root root 52950 2009-05-08 06:23 mod_cdr_csv.so* make[5]: *** [mod_cluechoo.lo] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_cluechoo-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Making install in build +-------- FreeSWITCH install Complete ----------+ + FreeSWITCH has been successfully installed. + + + ... + + +-----------------------------------------------+ make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2 -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Jason White Sent: Thursday, May 07, 2009 6:25 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Total noob question Lars Zeb <larclap@yahoo.com> wrote:
I have installed from the 1.0.4pre7 tarball on a openSuse 11.1.
Why is it that after I launch freeswitch and type in either 'show' or 'status' at the console, it responds with 'Unknown command', but it does accept 'shutdown'?
Maybe the mod_commands module wasn't loaded. Check your logs, and try "load mod_commands" from the FreeSWITCH console. That module should have been loaded unless there is something seriously wrong with the build or installation process. _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I've just installed fs-1.0.4pre7 quick-and-dirty and tried to connect a softphone to fs, but the phone refuses to register. I have tried two different ones (EyeBeam and Zoiper), but neither can register. I have turned off all firewalls(XP firewall, Outpost) on the client machine where the softphone is installed. I can ping the freeswitch machine from the client and I can ping the client machine from the freeswitch machine. The wireshark conversation is: 12 1.539643 192.168.10.11 192.168.10.29 SIP Request: SUBSCRIBE sip:1000@192.168.10.29;transport=UDP 13 1.539676 192.168.10.11 192.168.10.29 SIP Request: SUBSCRIBE sip:1000@192.168.10.29;transport=UDP 14 1.539722 192.168.10.11 192.168.10.29 SIP Request: REGISTER sip:192.168.10.29;transport=UDP 15 1.539757 192.168.10.11 192.168.10.29 SIP Request: REGISTER sip:192.168.10.29;transport=UDP 16 1.540027 192.168.10.29 192.168.10.11 ICMP Destination unreachable (Host administratively prohibited) where 192.168.10.11 is the client machine and 192.168.10.29 is freeswitch. Freeswitch is running on CentOS 5.3. What is keeping the freeswitch machine from pinging the client? Thanks, Lars
probably iptables try /etc/init.d/iptables stop if it starts working, go back and fix the rules or leave it off if you are already in a private network. On Sat, May 9, 2009 at 9:52 AM, Lars Zeb <larclap@yahoo.com> wrote:
I’ve just installed fs-1.0.4pre7 quick-and-dirty and tried to connect a softphone to fs, but the phone refuses to register. I have tried two different ones (EyeBeam and Zoiper), but neither can register.
I have turned off all firewalls(XP firewall, Outpost) on the client machine where the softphone is installed. I can ping the freeswitch machine from the client and I can ping the client machine from the freeswitch machine.
The wireshark conversation is:
12 1.539643 192.168.10.11 192.168.10.29 SIP Request: SUBSCRIBE sip:1000@192.168.10.29<sip%3A1000@192.168.10.29> ;transport=UDP
13 1.539676 192.168.10.11 192.168.10.29 SIP Request: SUBSCRIBE sip:1000@192.168.10.29<sip%3A1000@192.168.10.29> ;transport=UDP
14 1.539722 192.168.10.11 192.168.10.29 SIP Request: REGISTER sip:192.168.10.29;transport=UDP
15 1.539757 192.168.10.11 192.168.10.29 SIP Request: REGISTER sip:192.168.10.29;transport=UDP
16 1.540027 192.168.10.29 192.168.10.11 ICMP Destination unreachable (Host administratively prohibited)
where 192.168.10.11 is the client machine and 192.168.10.29 is freeswitch. Freeswitch is running on CentOS 5.3.
What is keeping the freeswitch machine from pinging the client?
Thanks, Lars
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
Logged onto root and typed: /etc/init.d/iptables save /etc/init.d/iptables stop Message: Unloading iptables modules ps -ef shows no iptables running Still cannot register phone From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale Sent: Saturday, May 09, 2009 8:15 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] New install can't register softphone probably iptables try /etc/init.d/iptables stop if it starts working, go back and fix the rules or leave it off if you are already in a private network. On Sat, May 9, 2009 at 9:52 AM, Lars Zeb <larclap@yahoo.com> wrote: I've just installed fs-1.0.4pre7 quick-and-dirty and tried to connect a softphone to fs, but the phone refuses to register. I have tried two different ones (EyeBeam and Zoiper), but neither can register. I have turned off all firewalls(XP firewall, Outpost) on the client machine where the softphone is installed. I can ping the freeswitch machine from the client and I can ping the client machine from the freeswitch machine. The wireshark conversation is: 12 1.539643 192.168.10.11 192.168.10.29 SIP Request: SUBSCRIBE sip:1000@192.168.10.29 <mailto:sip%3A1000@192.168.10.29> ;transport=UDP 13 1.539676 192.168.10.11 192.168.10.29 SIP Request: SUBSCRIBE sip:1000@192.168.10.29 <mailto:sip%3A1000@192.168.10.29> ;transport=UDP 14 1.539722 192.168.10.11 192.168.10.29 SIP Request: REGISTER sip:192.168.10.29;transport=UDP 15 1.539757 192.168.10.11 192.168.10.29 SIP Request: REGISTER sip:192.168.10.29;transport=UDP 16 1.540027 192.168.10.29 192.168.10.11 ICMP Destination unreachable (Host administratively prohibited) where 192.168.10.11 is the client machine and 192.168.10.29 is freeswitch. Freeswitch is running on CentOS 5.3. What is keeping the freeswitch machine from pinging the client? Thanks, Lars _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
Sorry, I rebooted both machines and now can hear the moh. Thanks. From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Lars Zeb Sent: Saturday, May 09, 2009 9:48 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] New install can't register softphone Logged onto root and typed: /etc/init.d/iptables save /etc/init.d/iptables stop Message: Unloading iptables modules ps -ef shows no iptables running Still cannot register phone From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale Sent: Saturday, May 09, 2009 8:15 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] New install can't register softphone probably iptables try /etc/init.d/iptables stop if it starts working, go back and fix the rules or leave it off if you are already in a private network. On Sat, May 9, 2009 at 9:52 AM, Lars Zeb <larclap@yahoo.com> wrote: I've just installed fs-1.0.4pre7 quick-and-dirty and tried to connect a softphone to fs, but the phone refuses to register. I have tried two different ones (EyeBeam and Zoiper), but neither can register. I have turned off all firewalls(XP firewall, Outpost) on the client machine where the softphone is installed. I can ping the freeswitch machine from the client and I can ping the client machine from the freeswitch machine. The wireshark conversation is: 12 1.539643 192.168.10.11 192.168.10.29 SIP Request: SUBSCRIBE sip:1000@192.168.10.29 <mailto:sip%3A1000@192.168.10.29> ;transport=UDP 13 1.539676 192.168.10.11 192.168.10.29 SIP Request: SUBSCRIBE sip:1000@192.168.10.29 <mailto:sip%3A1000@192.168.10.29> ;transport=UDP 14 1.539722 192.168.10.11 192.168.10.29 SIP Request: REGISTER sip:192.168.10.29;transport=UDP 15 1.539757 192.168.10.11 192.168.10.29 SIP Request: REGISTER sip:192.168.10.29;transport=UDP 16 1.540027 192.168.10.29 192.168.10.11 ICMP Destination unreachable (Host administratively prohibited) where 192.168.10.11 is the client machine and 192.168.10.29 is freeswitch. Freeswitch is running on CentOS 5.3. What is keeping the freeswitch machine from pinging the client? Thanks, Lars _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
I am new to Freeswitch. Before starting with Freeswitch, I had, and still do, an Asterisk (Switchvox) on the LAN. What changes to the Freeswitch config files do I need to make so that it can co-exist with the Asterisk box on the same LAN? I don't mean collaborate or interoperate, just co-exist. I know I need to change the SIP port number. Is there a document which describes this environment? Thanks, Lars
Lars Zeb <larclap@yahoo.com> wrote:
What changes to the Freeswitch config files do I need to make so that it can co-exist with the Asterisk box on the same LAN? I don't mean collaborate or interoperate, just co-exist. I know I need to change the SIP port number.
Why do you need to change the SIP port? If Asterisk and FreeSITCH are running on different machines, you shouldn't have to modify anything, other than to configure phones for use with FreeSWITCH. If they're running on the same machine, then you will need to change the SIP port of one or the other, and that's all you should need to change.
participants (7)
-
Anthony Minessale
-
Brian West
-
Fred-145
-
Jason White
-
Lars Zeb
-
Michael Collins
-
Shannon