Hello; I've been a freeswitch user for some time, but I am finally getting around to trying to get idea working again. I have an in-house CID lookup routine that works fine... it sets caller_id_name and effective_caller_id_name and those modified names show up fine on my telephones when the calls come in. That lookup routine adds a prefix of TM: if its a telemarketer, or VM: if i want the caller to go directly to voicemail... Basically, if the original CID from my provider shows up as "FOO Marketing", then after the cid-extension runs, the caller_id_name and effective_caller_name to "TM:FOO Marketing".... What is -not- working is the routing. I have an extension right after the CID Lookup that I want to do the routing directly to voicemail. Watching the debug logs, it appears that the field is already parsed and is set to the *original* callerid name that was available when the call came in... Trying different variations of field="caller_id_name" and field="${caller_id_name}" (and same with effective_caller_id_name) still yields no joy. Any guidance? The snippets from my dialplan are below. Thanks! <extension name="CID Inbound Lookup" continue="true"> <condition field="ani" expression="(\d{10})"> <action application="log" data="INFO In CID Inbound Lookup '$1' -- The Second Time"/> <action application="log" data="INFO CIDLookup(before): CID Num: '${caller_id_number}' CID Name: '${caller_id_name}' Orig CID Name: '${original_caller_id_name}' Dest: '${destination_number}'"/> <action application="set" data="url=num=${caller_id_number}&name=${url_- encode(${caller_id_name})}&did=${destination_number}"/> <action application="log" data="INFO CIDLookup(before): url: '${url}'"/> <action application="curl" data=" http://MYDOMAIN.com/MYCIDLOOKUP.php?${url}"/[1]> <action application="info"/> <action application="log" data="INFO CIDLookup(after ): curl_response_code: ${curl_response_code}"/> <action application="log" data="INFO CIDLookup(after ): curl_response_data: ${curl_response_data}"/> <action application="set" data="caller_id_name=${curl_response_data}"/> <action application="set" data="effective_caller_id_name=${curl_response_data}"/> <action application="log" data="INFO CIDLookup(after ): CID Num: '${caller_id_number}' CID Name: '${caller_id_name}' Orig CID Name: '${original_caller_id_name}' Dest: '${destination_number}'"/> <action application="log" data="INFO CIDLookup(after ): caller_id_name: '${caller_id_name}', original_caller_id_name: '${original_caller_id_name}', effective_caller_id_name: '${effective_caller_id_name}'" /> <!-- This event will be picked up by HB-Bot for announcing --> <action application="event" data="Event-Name=CUSTOM,Event- Subclass=CallAnnounce,ani=${destination_number},cidnum=${caller_id_numb- er},cidname=${caller_id_name}"/> </condition> </extension> and here are my test cases that are *right* after the above... but yet can't pick up the change in variables. *ONE* of these (I expect '3b' or '1') should fire... none do. <extension name="cid_test_0" continue="true"> <condition field="original_caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_0: : '${original_caller_id_name}'"/> </condition> </extension> <extension name="cid_test_1" continue="true"> <condition field="caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_1: : '${caller_id_name}'"/> </condition> </extension> <extension name="cid_test_2" continue="true"> <condition field="effective_caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_2: : '${effective_caller_id_name}'"/> </condition> </extension> <extension name="cid_test_3" continue="true"> <condition field='${caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_3: : '${caller_id_name}'"/> </condition> </extension> <extension name="cid_test_3b" continue="true"> <condition field="${caller_id_name}" expression="TM" > <action application="log" data="INFO cid_test_3b: : '${caller_id_name}'"/> </condition> </extension> <extension name="cid_test_4" continue="true"> <condition field='${effective_caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_4: : '${effective_caller_id_name}'"/> </condition> </extension> <extension name="cid_test_5" continue="true"> <condition field='${effective_caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_5: : '${effective_caller_id_name}'"/> </condition> </extension> Links: 1. http://www.dsba.net/voip/cidlookup.php?${url}"/
The dialplan is run in two stages - hunting and execution. In hunting it will look through the extensions for any where the the conditions match and puts the actions together into a list. It then executes that list of actions in order. As a result it's checking the effective_caller_id_name condition before the action that sets the variable has been executed. As a workaround if you run 'transfer' that will perform a new dialplan hunt generating a new list of actions to execute. If you set the variable then transfer, then the conditions in the new hunt will have the variable already set. Another option is using inline="true" on the set action. That will execute the action during the hunt itself. On 23 July 2015 at 22:36, David S. Dee <dsdee@dsba.net> wrote:
Hello;
I've been a freeswitch user for some time, but I am finally getting around to trying to get idea working again.
I have an in-house CID lookup routine that works fine... it sets caller_id_name and effective_caller_id_name and those modified names show up fine on my telephones when the calls come in.
That lookup routine adds a prefix of TM: if its a telemarketer, or VM: if i want the caller to go directly to voicemail... Basically, if the original CID from my provider shows up as "FOO Marketing", then after the cid-extension runs, the caller_id_name and effective_caller_name to "TM:FOO Marketing"....
What is -not- working is the routing.
I have an extension right after the CID Lookup that I want to do the routing directly to voicemail. Watching the debug logs, it appears that the field is already parsed and is set to the *original* callerid name that was available when the call came in... Trying different variations of field="caller_id_name" and field="${caller_id_name}" (and same with effective_caller_id_name) still yields no joy.
Any guidance? The snippets from my dialplan are below.
Thanks!
<extension name="CID Inbound Lookup" continue="true"> <condition field="ani" expression="(\d{10})"> <action application="log" data="INFO In CID Inbound Lookup '$1' -- The Second Time"/> <action application="log" data="INFO CIDLookup(before): CID Num: '${caller_id_number}' CID Name: '${caller_id_name}' Orig CID Name: '${original_caller_id_name}' Dest: '${destination_number}'"/>
<action application="set" data="url=num=${caller_id_number}&name=${url_encode(${caller_id_name})}&did=${destination_number}"/> <action application="log" data="INFO CIDLookup(before): url: '${url}'"/>
<action application="curl" data=" http://MYDOMAIN.com/MYCIDLOOKUP.php?${url}"/ <http://www.dsba.net/voip/cidlookup.php?$%7Burl%7D%22/>> <action application="info"/>
<action application="log" data="INFO CIDLookup(after ): curl_response_code: ${curl_response_code}"/> <action application="log" data="INFO CIDLookup(after ): curl_response_data: ${curl_response_data}"/>
<action application="set" data="caller_id_name=${curl_response_data}"/> <action application="set" data="effective_caller_id_name=${curl_response_data}"/>
<action application="log" data="INFO CIDLookup(after ): CID Num: '${caller_id_number}' CID Name: '${caller_id_name}' Orig CID Name: '${original_caller_id_name}' Dest: '${destination_number}'"/> <action application="log" data="INFO CIDLookup(after ): caller_id_name: '${caller_id_name}', original_caller_id_name: '${original_caller_id_name}', effective_caller_id_name: '${effective_caller_id_name}'" />
<!-- This event will be picked up by HB-Bot for announcing --> <action application="event" data="Event-Name=CUSTOM,Event-Subclass=CallAnnounce,ani=${destination_number},cidnum=${caller_id_number},cidname=${caller_id_name}"/>
</condition> </extension> and here are my test cases that are *right* after the above... but yet can't pick up the change in variables. *ONE* of these (I expect '3b' or '1') should fire... none do.
<extension name="cid_test_0" continue="true"> <condition field="original_caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_0: : '${original_caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_1" continue="true"> <condition field="caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_1: : '${caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_2" continue="true"> <condition field="effective_caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_2: : '${effective_caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_3" continue="true"> <condition field='${caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_3: : '${caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_3b" continue="true"> <condition field="${caller_id_name}" expression="TM" > <action application="log" data="INFO cid_test_3b: : '${caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_4" continue="true"> <condition field='${effective_caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_4: : '${effective_caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_5" continue="true"> <condition field='${effective_caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_5: : '${effective_caller_id_name}'"/> </condition> </extension>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I started playing with the 'inline=true's and finally got them in the right place... done. Thanks! On Thu, Jul 23, 2015, at 15:54, Steven Ayre wrote:
The dialplan is run in two stages - hunting and execution.
In hunting it will look through the extensions for any where the the conditions match and puts the actions together into a list. It then executes that list of actions in order. As a result it's checking the effective_caller_id_name condition before the action that sets the variable has been executed.
As a workaround if you run 'transfer' that will perform a new dialplan hunt generating a new list of actions to execute. If you set the variable then transfer, then the conditions in the new hunt will have the variable already set.
Another option is using inline="true" on the set action. That will execute the action during the hunt itself.
On 23 July 2015 at 22:36, David S. Dee <dsdee@dsba.net> wrote:
__ Hello;
I've been a freeswitch user for some time, but I am finally getting around to trying to get idea working again.
I have an in-house CID lookup routine that works fine... it sets caller_id_name and effective_caller_id_name and those modified names show up fine on my telephones when the calls come in.
That lookup routine adds a prefix of TM: if its a telemarketer, or VM: if i want the caller to go directly to voicemail... Basically, if the original CID from my provider shows up as "FOO Marketing", then after the cid-extension runs, the caller_id_name and effective_caller_name to "TM:FOO Marketing"....
What is -not- working is the routing.
I have an extension right after the CID Lookup that I want to do the routing directly to voicemail. Watching the debug logs, it appears that the field is already parsed and is set to the *original* callerid name that was available when the call came in... Trying different variations of field="caller_id_name" and field="${caller_id_name}" (and same with effective_caller_id_name) still yields no joy.
Any guidance? The snippets from my dialplan are below.
Thanks!
<extension name="CID Inbound Lookup" continue="true"> <condition field="ani" expression="(\d{10})"> <action application="log" data="INFO In CID Inbound Lookup '$1' -- The Second Time"/> <action application="log" data="INFO CIDLookup(before): CID Num: '${caller_id_number}' CID Name: '${caller_id_name}' Orig CID Name: '${original_caller_id_name}' Dest: '${destination_number}'"/>
<action application="set" data="url=num=${caller_id_number}&name=${u- rl_encode(${caller_id_name})}&did=${destination_number}"/> <action application="log" data="INFO CIDLookup(before): url: '${url}'"/>
<action application="curl" data=" http://MYDOMAIN.com/MYCIDLOOKUP.php?${url}"/[1]> <action application="info"/>
<action application="log" data="INFO CIDLookup(after ): curl_response_code: ${curl_response_code}"/> <action application="log" data="INFO CIDLookup(after ): curl_response_data: ${curl_response_data}"/>
<action application="set" data="caller_id_name=${curl_response_data}"/> <action application="set" data="effective_caller_id_name=${curl_response_data}"/>
<action application="log" data="INFO CIDLookup(after ): CID Num: '${caller_id_number}' CID Name: '${caller_id_name}' Orig CID Name: '${original_caller_id_name}' Dest: '${destination_number}'"/> <action application="log" data="INFO CIDLookup(after ): caller_id_name: '${caller_id_name}', original_caller_id_name: '${original_caller_id_name}', effective_caller_id_name: '${effective_caller_id_name}'" />
<!-- This event will be picked up by HB-Bot for announcing --> <action application="event" data="Event-Name=CUSTOM,Event- Subclass=CallAnnounce,ani=${destination_number},cidnum=${caller_id_n- umber},cidname=${caller_id_name}"/>
</condition> </extension> and here are my test cases that are *right* after the above... but yet can't pick up the change in variables. *ONE* of these (I expect '3b' or '1') should fire... none do.
<extension name="cid_test_0" continue="true"> <condition field="original_caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_0: : '${original_caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_1" continue="true"> <condition field="caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_1: : '${caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_2" continue="true"> <condition field="effective_caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_2: : '${effective_caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_3" continue="true"> <condition field='${caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_3: : '${caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_3b" continue="true"> <condition field="${caller_id_name}" expression="TM" > <action application="log" data="INFO cid_test_3b: : '${caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_4" continue="true"> <condition field='${effective_caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_4: : '${effective_caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_5" continue="true"> <condition field='${effective_caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_5: : '${effective_caller_id_name}'"/> </condition> </extension>
__________________________________________________________________- _______
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org ___________________________________________________________________-
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Links: 1. http://www.dsba.net/voip/cidlookup.php?$%7Burl%7D%22/
<condition field="effective_caller_id_name" expression="TM" > You need to use ${effective_caller_id_name} here. But I would do the whole logic in mod_lua or mod_perl, as it's much easier to program there. On Jul 23, 2015 11:45 PM, "David S. Dee" <dsdee@dsba.net> wrote:
Hello;
I've been a freeswitch user for some time, but I am finally getting around to trying to get idea working again.
I have an in-house CID lookup routine that works fine... it sets caller_id_name and effective_caller_id_name and those modified names show up fine on my telephones when the calls come in.
That lookup routine adds a prefix of TM: if its a telemarketer, or VM: if i want the caller to go directly to voicemail... Basically, if the original CID from my provider shows up as "FOO Marketing", then after the cid-extension runs, the caller_id_name and effective_caller_name to "TM:FOO Marketing"....
What is -not- working is the routing.
I have an extension right after the CID Lookup that I want to do the routing directly to voicemail. Watching the debug logs, it appears that the field is already parsed and is set to the *original* callerid name that was available when the call came in... Trying different variations of field="caller_id_name" and field="${caller_id_name}" (and same with effective_caller_id_name) still yields no joy.
Any guidance? The snippets from my dialplan are below.
Thanks!
<extension name="CID Inbound Lookup" continue="true"> <condition field="ani" expression="(\d{10})"> <action application="log" data="INFO In CID Inbound Lookup '$1' -- The Second Time"/> <action application="log" data="INFO CIDLookup(before): CID Num: '${caller_id_number}' CID Name: '${caller_id_name}' Orig CID Name: '${original_caller_id_name}' Dest: '${destination_number}'"/>
<action application="set" data="url=num=${caller_id_number}&name=${url_encode(${caller_id_name})}&did=${destination_number}"/> <action application="log" data="INFO CIDLookup(before): url: '${url}'"/>
<action application="curl" data=" http://MYDOMAIN.com/MYCIDLOOKUP.php?${url}"/ <http://www.dsba.net/voip/cidlookup.php?$%7Burl%7D%22/>> <action application="info"/>
<action application="log" data="INFO CIDLookup(after ): curl_response_code: ${curl_response_code}"/> <action application="log" data="INFO CIDLookup(after ): curl_response_data: ${curl_response_data}"/>
<action application="set" data="caller_id_name=${curl_response_data}"/> <action application="set" data="effective_caller_id_name=${curl_response_data}"/>
<action application="log" data="INFO CIDLookup(after ): CID Num: '${caller_id_number}' CID Name: '${caller_id_name}' Orig CID Name: '${original_caller_id_name}' Dest: '${destination_number}'"/> <action application="log" data="INFO CIDLookup(after ): caller_id_name: '${caller_id_name}', original_caller_id_name: '${original_caller_id_name}', effective_caller_id_name: '${effective_caller_id_name}'" />
<!-- This event will be picked up by HB-Bot for announcing --> <action application="event" data="Event-Name=CUSTOM,Event-Subclass=CallAnnounce,ani=${destination_number},cidnum=${caller_id_number},cidname=${caller_id_name}"/>
</condition> </extension> and here are my test cases that are *right* after the above... but yet can't pick up the change in variables. *ONE* of these (I expect '3b' or '1') should fire... none do.
<extension name="cid_test_0" continue="true"> <condition field="original_caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_0: : '${original_caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_1" continue="true"> <condition field="caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_1: : '${caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_2" continue="true"> <condition field="effective_caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_2: : '${effective_caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_3" continue="true"> <condition field='${caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_3: : '${caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_3b" continue="true"> <condition field="${caller_id_name}" expression="TM" > <action application="log" data="INFO cid_test_3b: : '${caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_4" continue="true"> <condition field='${effective_caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_4: : '${effective_caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_5" continue="true"> <condition field='${effective_caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_5: : '${effective_caller_id_name}'"/> </condition> </extension>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
also with mod_perl, you can set a short HTTP timeout, so that your system still works if the remote HTTP server stops responding. Here's an example for CID lookup in LDAP: https://github.com/voxserv/freeswitch-helper-scripts/blob/master/mod_perl/lo... On Fri, Jul 24, 2015 at 2:31 AM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
<condition field="effective_caller_id_name" expression="TM" >
You need to use ${effective_caller_id_name} here.
But I would do the whole logic in mod_lua or mod_perl, as it's much easier to program there.
On Jul 23, 2015 11:45 PM, "David S. Dee" <dsdee@dsba.net> wrote:
Hello;
I've been a freeswitch user for some time, but I am finally getting around to trying to get idea working again.
I have an in-house CID lookup routine that works fine... it sets caller_id_name and effective_caller_id_name and those modified names show up fine on my telephones when the calls come in.
That lookup routine adds a prefix of TM: if its a telemarketer, or VM: if i want the caller to go directly to voicemail... Basically, if the original CID from my provider shows up as "FOO Marketing", then after the cid-extension runs, the caller_id_name and effective_caller_name to "TM:FOO Marketing"....
What is -not- working is the routing.
I have an extension right after the CID Lookup that I want to do the routing directly to voicemail. Watching the debug logs, it appears that the field is already parsed and is set to the *original* callerid name that was available when the call came in... Trying different variations of field="caller_id_name" and field="${caller_id_name}" (and same with effective_caller_id_name) still yields no joy.
Any guidance? The snippets from my dialplan are below.
Thanks!
<extension name="CID Inbound Lookup" continue="true"> <condition field="ani" expression="(\d{10})"> <action application="log" data="INFO In CID Inbound Lookup '$1' -- The Second Time"/> <action application="log" data="INFO CIDLookup(before): CID Num: '${caller_id_number}' CID Name: '${caller_id_name}' Orig CID Name: '${original_caller_id_name}' Dest: '${destination_number}'"/>
<action application="set" data="url=num=${caller_id_number}&name=${url_encode(${caller_id_name})}&did=${destination_number}"/> <action application="log" data="INFO CIDLookup(before): url: '${url}'"/>
<action application="curl" data="http://MYDOMAIN.com/MYCIDLOOKUP.php?${url}"/> <action application="info"/>
<action application="log" data="INFO CIDLookup(after ): curl_response_code: ${curl_response_code}"/> <action application="log" data="INFO CIDLookup(after ): curl_response_data: ${curl_response_data}"/>
<action application="set" data="caller_id_name=${curl_response_data}"/> <action application="set" data="effective_caller_id_name=${curl_response_data}"/>
<action application="log" data="INFO CIDLookup(after ): CID Num: '${caller_id_number}' CID Name: '${caller_id_name}' Orig CID Name: '${original_caller_id_name}' Dest: '${destination_number}'"/> <action application="log" data="INFO CIDLookup(after ): caller_id_name: '${caller_id_name}', original_caller_id_name: '${original_caller_id_name}', effective_caller_id_name: '${effective_caller_id_name}'" />
<!-- This event will be picked up by HB-Bot for announcing --> <action application="event" data="Event-Name=CUSTOM,Event-Subclass=CallAnnounce,ani=${destination_number},cidnum=${caller_id_number},cidname=${caller_id_name}"/>
</condition> </extension> and here are my test cases that are *right* after the above... but yet can't pick up the change in variables. *ONE* of these (I expect '3b' or '1') should fire... none do.
<extension name="cid_test_0" continue="true"> <condition field="original_caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_0: : '${original_caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_1" continue="true"> <condition field="caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_1: : '${caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_2" continue="true"> <condition field="effective_caller_id_name" expression="TM" > <action application="log" data="INFO cid_test_2: : '${effective_caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_3" continue="true"> <condition field='${caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_3: : '${caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_3b" continue="true"> <condition field="${caller_id_name}" expression="TM" > <action application="log" data="INFO cid_test_3b: : '${caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_4" continue="true"> <condition field='${effective_caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_4: : '${effective_caller_id_name}'"/> </condition> </extension>
<extension name="cid_test_5" continue="true"> <condition field='${effective_caller_id_name}' expression="TM" > <action application="log" data="INFO cid_test_5: : '${effective_caller_id_name}'"/> </condition> </extension>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
David S. Dee
-
Stanislav Sinyagin
-
Steven Ayre