Hi, can any body tried to connect cisco router from Freeswitch, please help me. -- Srinivasula Reddy K
I have CISCO AS 5350 running with Freeswitch in production environment. Seems to work perfect. Thank you. On Mon, Mar 8, 2010 at 8:08 PM, srinivasula reddy < srinivas.ksvreddy@gmail.com> wrote:
Hi,
can any body tried to connect cisco router from Freeswitch, please help me.
-- Srinivasula Reddy K
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Muhammad Shahzad ----------------------------------- CISCO Rich Media Communication Specialist (CRMCS) CISCO Certified Network Associate (CCNA) Cell: +92 334 422 40 88 MSN: shari_786pk@hotmail.com Email: shaheryarkh@googlemail.com
What help do you need? What Cisco do you have? __Yehavi: 2010/3/8 srinivasula reddy <srinivas.ksvreddy@gmail.com>
Hi,
can any body tried to connect cisco router from Freeswitch, please help me.
-- Srinivasula Reddy K
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
HI, how do i configure freeswitch gateway to communicate to cisco router, i am using cisco2921. Thanks Srinivas On Mon, Mar 8, 2010 at 8:38 PM, srinivasula reddy < srinivas.ksvreddy@gmail.com> wrote:
Hi,
can any body tried to connect cisco router from Freeswitch, please help me.
-- Srinivasula Reddy K
-- Srinivasula Reddy K
You seem rather needy. Have you even tried google yet? When asking for help you could be more descriptive if you want help. These "I need help" without any directed questioned signals to me you have a job to do and you don't know how to do it and you're now asking US to do your job for you. Be descriptive and do some research yourself. Again we aren't cisco and you didn't pay us for that hardware so I would start by venturing over to www.cisco.com and searching their docs for that hardware on how to configure voice peers. Then ask questions if anything is left to question. /b On Mar 8, 2010, at 9:23 AM, srinivasula reddy wrote:
HI,
how do i configure freeswitch gateway to communicate to cisco router, i am using cisco2921.
Thanks Srinivas
+1 with Brian, Just as I have 5 spare minutes and to be kind: * E1 controller config: controller E1 0/0/0 framing NO-CRC4 pri-group timeslots 1-31 description E1_1 ! interface Serial0/0/0:15 no ip address encapsulation hdlc isdn switch-type primary-net5 isdn not-end-to-end 64 isdn incoming-voice voice isdn bchan-number-order descending round-robin no cdp enable ! voice-port 0/0/0:15 no comfort-noise cptone FR timeouts call-disconnect 1 timeouts wait-release 1 ! * Dial-peers ( SIP to E1 and E1 to SIP): dial-peer voice 100 pots description SIP_TO_E1 destination-pattern 0........ progress_ind setup enable 3 progress_ind progress enable 8 progress_ind connect enable 8 progress_ind disconnect enable 8 no digit-strip port 0/0/0:15 ! dial-peer voice 500 voip description E1_TO_SIP destination-pattern .... progress_ind setup enable 3 session protocol sipv2 session target ipv4:FREESWITCH_IP session transport udp dtmf-relay rtp-nte codec g711alaw no vad ! Remember to adapt this config to your needs ( there are mandatory missing parts, but at least you have some config options to look for). Regards, Gled. Brian West a écrit :
You seem rather needy. Have you even tried google yet? When asking for help you could be more descriptive if you want help. These "I need help" without any directed questioned signals to me you have a job to do and you don't know how to do it and you're now asking US to do your job for you. Be descriptive and do some research yourself. Again we aren't cisco and you didn't pay us for that hardware so I would start by venturing over to www.cisco.com and searching their docs for that hardware on how to configure voice peers. Then ask questions if anything is left to question.
/b
On Mar 8, 2010, at 9:23 AM, srinivasula reddy wrote:
HI,
how do i configure freeswitch gateway to communicate to cisco router, i am using cisco2921.
Thanks Srinivas
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you for taking the time to help out... maybe a wiki page can be created on this moving forward. I wasn't in any way trying to be mean or disrespectful. I'm clearly trying to state that we can't possibly help everyone with everything at some point it just starts to get overwhelming to try to help everyone. I thank everyone that are starting to step up and help people out on the list. Lets keep that up it helps greatly. Thanks, Brian On Mar 8, 2010, at 11:23 AM, Tristan Mahé wrote:
+1 with Brian,
Just as I have 5 spare minutes and to be kind:
Hi I can help out with the Cisco config, but I have not worked out what I need to configure FreeSWITCH to route a SIP call to the ip address of the Cisco GW. If I could get a bit of help there I will write, or help write howto. Regards Stevek On Mon, 2010-03-08 at 18:23 +0100, Tristan Mahé wrote:
+1 with Brian,
Just as I have 5 spare minutes and to be kind:
* E1 controller config:
controller E1 0/0/0 framing NO-CRC4 pri-group timeslots 1-31 description E1_1 ! interface Serial0/0/0:15 no ip address encapsulation hdlc isdn switch-type primary-net5 isdn not-end-to-end 64 isdn incoming-voice voice isdn bchan-number-order descending round-robin no cdp enable ! voice-port 0/0/0:15 no comfort-noise cptone FR timeouts call-disconnect 1 timeouts wait-release 1 !
* Dial-peers ( SIP to E1 and E1 to SIP):
dial-peer voice 100 pots description SIP_TO_E1 destination-pattern 0........ progress_ind setup enable 3 progress_ind progress enable 8 progress_ind connect enable 8 progress_ind disconnect enable 8 no digit-strip port 0/0/0:15 ! dial-peer voice 500 voip description E1_TO_SIP destination-pattern .... progress_ind setup enable 3 session protocol sipv2 session target ipv4:FREESWITCH_IP session transport udp dtmf-relay rtp-nte codec g711alaw no vad !
Remember to adapt this config to your needs ( there are mandatory missing parts, but at least you have some config options to look for).
Regards,
Gled.
Brian West a écrit :
You seem rather needy. Have you even tried google yet? When asking for help you could be more descriptive if you want help. These "I need help" without any directed questioned signals to me you have a job to do and you don't know how to do it and you're now asking US to do your job for you. Be descriptive and do some research yourself. Again we aren't cisco and you didn't pay us for that hardware so I would start by venturing over to www.cisco.com and searching their docs for that hardware on how to configure voice peers. Then ask questions if anything is left to question.
/b
On Mar 8, 2010, at 9:23 AM, srinivasula reddy wrote:
HI,
how do i configure freeswitch gateway to communicate to cisco router, i am using cisco2921.
Thanks Srinivas
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
all you need is.. <action application="bridge" data="{sip_cid_type=rpid}sofia/**YOURPROFILE**/$1@**CISCOIP**" /> not all IOS's are going to need the caller ID to be forced to rpid, but in my experience I needed it. ( it should not hurt anyways ) hope that helps Jay On Tue, Mar 9, 2010 at 6:18 PM, Stephen Kingham < Stephen.Kingham@kingtech.com.au> wrote:
Hi
I can help out with the Cisco config, but I have not worked out what I need to configure FreeSWITCH to route a SIP call to the ip address of the Cisco GW. If I could get a bit of help there I will write, or help write howto.
Regards
Stevek
On Mon, 2010-03-08 at 18:23 +0100, Tristan Mahé wrote:
+1 with Brian,
Just as I have 5 spare minutes and to be kind:
* E1 controller config:
controller E1 0/0/0 framing NO-CRC4 pri-group timeslots 1-31 description E1_1 ! interface Serial0/0/0:15 no ip address encapsulation hdlc isdn switch-type primary-net5 isdn not-end-to-end 64 isdn incoming-voice voice isdn bchan-number-order descending round-robin no cdp enable ! voice-port 0/0/0:15 no comfort-noise cptone FR timeouts call-disconnect 1 timeouts wait-release 1 !
* Dial-peers ( SIP to E1 and E1 to SIP):
dial-peer voice 100 pots description SIP_TO_E1 destination-pattern 0........ progress_ind setup enable 3 progress_ind progress enable 8 progress_ind connect enable 8 progress_ind disconnect enable 8 no digit-strip port 0/0/0:15 ! dial-peer voice 500 voip description E1_TO_SIP destination-pattern .... progress_ind setup enable 3 session protocol sipv2 session target ipv4:FREESWITCH_IP session transport udp dtmf-relay rtp-nte codec g711alaw no vad !
Remember to adapt this config to your needs ( there are mandatory missing parts, but at least you have some config options to look for).
Regards,
Gled.
Brian West a écrit :
You seem rather needy. Have you even tried google yet? When asking for help you could be more descriptive if you want help. These "I need help" without any directed questioned signals to me you have a job to do and you don't know how to do it and you're now asking US to do your job for you. Be descriptive and do some research yourself. Again we aren't cisco and you didn't pay us for that hardware so I would start by venturing over to www.cisco.com and searching their docs for that hardware on how to configure voice peers. Then ask questions if anything is left to question.
/b
On Mar 8, 2010, at 9:23 AM, srinivasula reddy wrote:
HI,
how do i configure freeswitch gateway to communicate to cisco router, i am using cisco2921.
Thanks Srinivas
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely Jay
participants (7)
-
Brian West
-
jay binks
-
Muhammad Shahzad
-
srinivasula reddy
-
Stephen Kingham
-
Tristan Mahé
-
Yehavi Bourvine