Re: [Freeswitch-users] dtmf via info
ok, 1. why you need sip info DTMF? is not standard 2. you could try out <action application="set" data="dtmf-type=info"/>. if don't work, set it in the profile. 3. i strongly recomand you to use rfc2833 or inband dtmf. thank you Le 18/02/2011 09:57, Nikolay Kondratyev a écrit :
Hi all,
I’d like to send dtmf via info and I’d like to set it in the dial plan.
Do I just need to set dtmf_type channel variable in the dial plan?
I tried to set<action application="set" data="dtmf_type=info"/> in the dialplan, but I do not see Info messages…. Should it work in this way at all? Did I miss something? Thanks in advance, Nikolay.
-- This message has been scanned for viruses and dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is believed to be clean.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Meftah Tayeb inum: +883510001288000 phone: +13477595883
I agree, that 2833 is better then sip info for dtmf. I need sip info dtmf because of the itsp. Due to some particular features of my network I need to be able to choose dtmf method on the basis of destination number. So I can not set dtmf-type in the profile… I’ve already tried to set channel variable dtmf_type in the corresponding extention in my dialplan, that did not worked… I tried to set “dtmf-type” (as you proposed) too, but with the same result – I don’t see info messages… My scheme is as following: Avaya IPOFFICE ---- h323 ---- FS ----sip ----- SIPX ----- sip ITSP. FS is used ad h.323 – sip gateway. So… Is it possible to choose dtmf method on the basis of destination number? Rgds, Nikolay. _____ From: Meftah Tayeb [mailto:tayeb.meftah@gmail.com] Sent: Friday, February 18, 2011 12:52 PM To: FreeSWITCH Users Help Cc: Nikolay Kondratyev Subject: Re: [Freeswitch-users] dtmf via info ok, 1. why you need sip info DTMF? is not standard 2. you could try out <action application="set" data="dtmf-type=info"/>. if don't work, set it in the profile. 3. i strongly recomand you to use rfc2833 or inband dtmf. thank you Le 18/02/2011 09:57, Nikolay Kondratyev a écrit : Hi all, I’d like to send dtmf via info and I’d like to set it in the dial plan. Do I just need to set dtmf_type channel variable in the dial plan? I tried to set <action application="set" data="dtmf_type=info"/> in the dialplan, but I do not see Info messages…. Should it work in this way at all? Did I miss something? Thanks in advance, Nikolay. -- This message has been scanned for viruses and dangerous content by <http://www.mailscanner.info/> MailScanner, and is believed to be clean. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Meftah Tayeb inum: +883510001288000 phone: +13477595883 -- This message has been scanned for viruses and dangerous content by <http://www.mailscanner.info/> MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
participants (2)
-
Meftah Tayeb
-
Nikolay Kondratyev