Hello, Can somebody tell me if they have FS setup working using TLS connection only? We have some problems and they are very similar as described in this issue: * FS-3877: Reuse TCP connection for both directions * (http://jira.freeswitch.org/browse/FS-3877) How complex is root of this problem and is it something somebody else could solve if they had some time on their side and help from you? Best, -- Silvije ---------------------------------------------- http://linkedin.com/in/silvije ----------------------------------------------
Hi, I had problems with Polycoms which works for a while and then had a reset of the TLS connection. I didn't check it in the last few months though. I'll check it again once I go to recent GIT version. __Yehavi: 2012/2/27 Silvije Kalabić <silvije.kalabic@fiveminutes.eu>
Hello,
Can somebody tell me if they have FS setup working using TLS connection only?
We have some problems and they are very similar as described in this issue: * FS-3877: Reuse TCP connection for both directions * (http://jira.freeswitch.org/browse/FS-3877)
How complex is root of this problem and is it something somebody else could solve if they had some time on their side and help from you?
Best, -- Silvije
---------------------------------------------- http://linkedin.com/in/silvije ----------------------------------------------
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Yehavi, Was this the one you and I were chasing down? If you crank up the debug level it never crashes if I recall. /b On Feb 27, 2012, at 1:22 PM, Yehavi Bourvine wrote:
Hi,
I had problems with Polycoms which works for a while and then had a reset of the TLS connection. I didn't check it in the last few months though.
I'll check it again once I go to recent GIT version.
__Yehavi:
I have no problem running freeswitch in TLS only mode, if you are experiencing the ability to make calls but not receive them it could be a NAT issue. Freeswitch needs the ability to connect back with a new TCP connection to the client for incoming calls to work with TLS registration. If there is a firewall or nat between the client and FS this could cause problems. ~Mitch
The problem that I have seen is the client says one port in the contact but uses a different one. So if the client wouldn't lie we would always reuse the same connection. Right now Polycom is broken you'll see it auto-nat-2.0 by default if I recall. /b On Feb 27, 2012, at 7:51 PM, Mitch Capper wrote:
I have no problem running freeswitch in TLS only mode, if you are experiencing the ability to make calls but not receive them it could be a NAT issue. Freeswitch needs the ability to connect back with a new TCP connection to the client for incoming calls to work with TLS registration. If there is a firewall or nat between the client and FS this could cause problems.
~Mitch
I can look further but as I am using FS as the client and server one would hope for the best:) ~Mitch
So this is the root cause of FS-3877? (Reuse TCP connection for both directions) It is not a FS issue? - Silvije On 2/28/12 04:08 AM, Brian West wrote:
The problem that I have seen is the client says one port in the contact but uses a different one.
So if the client wouldn't lie we would always reuse the same connection. Right now Polycom is broken you'll see it auto-nat-2.0 by default if I recall.
/b
On Feb 27, 2012, at 7:51 PM, Mitch Capper wrote:
I have no problem running freeswitch in TLS only mode, if you are experiencing the ability to make calls but not receive them it could be a NAT issue. Freeswitch needs the ability to connect back with a new TCP connection to the client for incoming calls to work with TLS registration. If there is a firewall or nat between the client and FS this could cause problems.
~Mitch
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi, It might be that this is the same thing, I don't remember... Anyway, I have Polycoms in a non-NAT installation. I'll try that again with them. __Yehavi: 2012/2/28 Brian West <brian@freeswitch.org>
Yehavi, Was this the one you and I were chasing down? If you crank up the debug level it never crashes if I recall.
/b
On Feb 27, 2012, at 1:22 PM, Yehavi Bourvine wrote:
Hi,
I had problems with Polycoms which works for a while and then had a reset of the TLS connection. I didn't check it in the last few months though.
I'll check it again once I go to recent GIT version.
__Yehavi:
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Brian West
-
Mitch Capper
-
Silvije Kalabić
-
Yehavi Bourvine