Hi! Trying to use freeTDM with FreeSWITCH, but the supplied tones.conf only has setups for US, SG and RU. I found the ones for India on the wiki, but haven't found anything for NL (that I need), nor any other European country. Any pointers to how to configure tones.conf for NL? Any way to use stuff from asterisk? Julf
Hi Johan, Another way would be to use the tone_detect application. http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_tone_detect I found this handy as well http://www.3amsystems.com/wireline/tone-search.htm guru On Mon, Mar 7, 2011 at 9:42 PM, Johan Helsingius <julf@julf.com> wrote:
Hi!
Trying to use freeTDM with FreeSWITCH, but the supplied tones.conf only has setups for US, SG and RU. I found the ones for India on the wiki, but haven't found anything for NL (that I need), nor any other European country. Any pointers to how to configure tones.conf for NL? Any way to use stuff from asterisk?
Julf
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi, guru,
Another way would be to use the tone_detect application. http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_tone_detect
The problem is that I don't seem to get my DECT phone to generate anything before it gets a dial tone.
I found this handy as well http://www.3amsystems.com/wireline/tone-search.htm
That is helpful - but is the tones.conf format documented anywhere? Julf
On Mon, Mar 7, 2011 at 11:31 PM, Johan Helsingius <julf@julf.com> wrote:
Hi, guru,
Another way would be to use the tone_detect application. http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_tone_detect
The problem is that I don't seem to get my DECT phone to generate anything before it gets a dial tone.
This is mostly useful to detect busy tone for incoming calls I guess. I was lucky to have tones.conf for India on the wiki :) I can't help you beyond that, maybe somebody else would chime in.
I found this handy as well http://www.3amsystems.com/wireline/tone-search.htm
That is helpful - but is the tones.conf format documented anywhere?
Julf
guru
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Mon, Mar 7, 2011 at 10:01 AM, Johan Helsingius <julf@julf.com> wrote:
Hi, guru,
Another way would be to use the tone_detect application. http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_tone_detect
The problem is that I don't seem to get my DECT phone to generate anything before it gets a dial tone.
I found this handy as well http://www.3amsystems.com/wireline/tone-search.htm
That is helpful - but is the tones.conf format documented anywhere?
The format is not "documented" per se, but the format can be inferred by looking at the existing entries: generate-dial => v=-7;%(1000,0,350,440) detect-dial => 350,440 generate-ring => v=-7;%(2000,4000,440,480) detect-ring => 440,480 generate-busy => v=-7;%(500,500,480,620) detect-busy => 480,620 "generate-dial" means "generate dial tone" and uses the TGML. (Look up TGML on the wiki) "detect-dial" means the frequenc(y|ies) to detect a dial tone. If I read the interwebs correct then NL uses 150Hz + 450Hz for dialtone, 425Hz (.5 sec on, .5 sec off) for busy, and 425Hz (1 sec on, 4 secs off) for ringing. Try these values: [nl] generate-dial => v=-7;%(1000,0,150,450) detect-dial => 150,450 generate-ring => v=-7;%(1000,4000,425) detect-ring => 425 generate-busy => v=-7;%(500,500,425) detect-busy => 425 If they work then let us know and we'll add them to the tones.conf file. FYI, I'll let you research the "attn" "call-waiting" and "detect-failX" tones for your country. :) -MC
Michael,
The format is not "documented" per se, but the format can be inferred by looking at the existing entries:
Well, it is pretty easy to guess what the names of tones are, but "-7;%(1000,0,350,440)" was not exactly clear... :)
Look up TGML on the wiki
Ah, yes, that helps!
Try these values:
Well, seems my problem is also related to not being able to get freetdm to generate a dialtone in the first place. About to dash off on a 3-day trip, but will investigate as soon as I am back.
If they work then let us know and we'll add them to the tones.conf file. FYI, I'll let you research the "attn" "call-waiting" and "detect-failX" tones for your country. :)
Will do! Thanks! Julf
Hi Michael and Johan,
If they work then let us know and we'll add them to the tones.conf file. FYI, I'll let you research the "attn" "call-waiting" and "detect-failX" tones for your country. :)
I'm not sure I understand correclty, but does this help with the needed tones? http://vxlabs.com/2011/02/05/sipura-linksys-cisco-spa3102-voice-gateway-in-t... Best regards, Jeroen Eeuwes
Jeroen,
I'm not sure I understand correclty, but does this help with the needed tones?
http://vxlabs.com/2011/02/05/sipura-linksys-cisco-spa3102-voice-gateway-in-t...
Definitely! Many thanks! Julf
participants (4)
-
guru singh
-
Jeroen Eeuwes
-
Johan Helsingius
-
Michael Collins