I useing FS 1.0.7 ，Connected to nokia 3208C cellphone with usb。I can communicate with cellphone by minicom。When I load mod_gsmopen , following errors message. Have you compiled mod_gsmopen correctly? Perhaps the AT Command of 3208c dose not match ，I need to modify gsmopen.conf.xml. 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1364 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1364 ][none ][-1,-1,-1] globals.debug=0 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1366 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1366 ][none ][-1,-1,-1] globals.debug=8 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1372 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1372 ][none ][-1,-1,-1] globals.dialplan=XML 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1378 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1378 ][none ][-1,-1,-1] globals.context=context_1 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1369 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1369 ][none ][-1,-1,-1] globals.hold_music= 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1375 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1375 ][none ][-1,-1,-1] globals.destination=9999 2011-05-25 10:25:33.694973 [WARNING] mod_gsmopen.cpp:1860 rev 宸插鍑篬(nil)|37 ][WARNINGA 1860 ][interface1][-1, 0, 0] STARTING interface_id=1 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1861 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1861 ][interface1][-1, 0, 0] id=1 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1862 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1862 ][interface1][-1, 0, 0] name=interface1 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1863 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1863 ][interface1][-1, 0, 0] hold-music= 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1864 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1864 ][interface1][-1, 0, 0] context=context_1 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1865 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1865 ][interface1][-1, 0, 0] dialplan=XML 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1866 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1866 ][interface1][-1, 0, 0] destination=5000 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1867 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1867 ][interface1][-1, 0, 0] controldevice_name=/dev/ttyACM0 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1869 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1869 ][interface1][-1, 0, 0] alsacname=plughw:1 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1870 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1870 ][interface1][-1, 0, 0] alsapname=plughw:1 2011-05-25 10:25:33.694973 [DEBUG] mod_gsmopen.cpp:1885 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 1885 ][interface1][-1, 0, 0] gsmopen_serial_sync_period=300 2011-05-25 10:25:34.711673 [DEBUG] gsmopen_protocol.cpp:485 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 485 ][interface1][-1, 0, 0] Syncing Serial, fd=68, protocol=2 2011-05-25 10:25:34.731728 [DEBUG] gsmopen_protocol.cpp:2581 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2581 ][interface1][-1, 0, 0] ucs2_in=006300690061006F0020003100320033002000620065006C00E80020043D043E0432043E044104420438002005DC05E7002005E805D005EA0020FE8EFEE0FEA0FEE4FECBFE9300204EBA5927 2011-05-25 10:25:34.731728 [DEBUG] gsmopen_protocol.cpp:2602 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2602 ][interface1][-1, 0, 0] 1 ciao in=, inleft=76, out=, outleft=1000, converted=, utf8_out= 2011-05-25 10:25:34.731728 [DEBUG] gsmopen_protocol.cpp:2614 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2614 ][interface1][-1, 0, 0] iconv_res=0, in=, inleft=0, out=, outleft=933, converted=, utf8_out=ciao 123 bel猫 薪芯胁芯褋褌懈 诇拽 专讗转 锖庯粻锖狅护锘嬶簱 浜哄ぇ 2011-05-25 10:25:34.731728 [DEBUG] gsmopen_protocol.cpp:632 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 632 ][interface1][-1, 0, 0] sleeping for 500000 usec 2011-05-25 10:25:35.231548 [DEBUG] gsmopen_protocol.cpp:689 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 689 ][interface1][-1, 0, 0] sleeping for 500000 usec 2011-05-25 10:25:35.731444 [DEBUG] gsmopen_protocol.cpp:2362 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2362 ][interface1][-1, 0, 0] sending: AT 2011-05-25 10:25:35.731444 [DEBUG] gsmopen_protocol.cpp:2264 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2264 ][interface1][-1, 0, 0] sent data... (A) 2011-05-25 10:25:35.731444 [DEBUG] gsmopen_protocol.cpp:2264 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2264 ][interface1][-1, 0, 0] sent data... (T) 2011-05-25 10:25:35.731444 [DEBUG] gsmopen_protocol.cpp:2290 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2290 ][interface1][-1, 0, 0] sent (carriage return) 2011-05-25 10:25:38.230865 [ERR] gsmopen_protocol.cpp:696 rev 宸插鍑篬(nil)|37 ][ERRORA 696 ][interface1][-1, 0, 0] no response to AT 2011-05-25 10:25:38.230865 [ERR] mod_gsmopen.cpp:1907 rev 宸插鍑篬(nil)|37 ][ERRORA 1907 ][interface1][-1, 0, 0] gsmopen_serial_config failed, let's try again 2011-05-25 10:25:38.342857 [DEBUG] gsmopen_protocol.cpp:2581 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2581 ][interface1][-1, 0, 0] ucs2_in=006300690061006F0020003100320033002000620065006C00E80020043D043E0432043E044104420438002005DC05E7002005E805D005EA0020FE8EFEE0FEA0FEE4FECBFE9300204EBA5927 2011-05-25 10:25:38.342857 [DEBUG] gsmopen_protocol.cpp:2602 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2602 ][interface1][-1, 0, 0] 1 ciao in=, inleft=76, out=, outleft=1000, converted=, utf8_out= 2011-05-25 10:25:38.342857 [DEBUG] gsmopen_protocol.cpp:2614 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2614 ][interface1][-1, 0, 0] iconv_res=0, in=, inleft=0, out=, outleft=933, converted=, utf8_out=ciao 123 bel猫 薪芯胁芯褋褌懈 诇拽 专讗转 锖庯粻锖狅护锘嬶簱 浜哄ぇ 2011-05-25 10:25:38.342857 [DEBUG] gsmopen_protocol.cpp:632 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 632 ][interface1][-1, 0, 0] sleeping for 500000 usec 2011-05-25 10:25:38.842711 [DEBUG] gsmopen_protocol.cpp:689 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 689 ][interface1][-1, 0, 0] sleeping for 500000 usec 2011-05-25 10:25:39.342567 [DEBUG] gsmopen_protocol.cpp:2362 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2362 ][interface1][-1, 0, 0] sending: AT 2011-05-25 10:25:39.342567 [DEBUG] gsmopen_protocol.cpp:2264 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2264 ][interface1][-1, 0, 0] sent data... (A) 2011-05-25 10:25:39.342567 [DEBUG] gsmopen_protocol.cpp:2264 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2264 ][interface1][-1, 0, 0] sent data... (T) 2011-05-25 10:25:39.342567 [DEBUG] gsmopen_protocol.cpp:2290 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2290 ][interface1][-1, 0, 0] sent (carriage return) 2011-05-25 10:25:41.842030 [ERR] gsmopen_protocol.cpp:696 rev 宸插鍑篬(nil)|37 ][ERRORA 696 ][interface1][-1, 0, 0] no response to AT 2011-05-25 10:25:41.842030 [ERR] mod_gsmopen.cpp:1913 rev 宸插鍑篬(nil)|37 ][ERRORA 1913 ][interface1][-1, 0, 0] 1: gsmopen_serial_config failed, let's try again 2011-05-25 10:25:41.962079 [DEBUG] gsmopen_protocol.cpp:2581 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2581 ][interface1][-1, 0, 0] ucs2_in=006300690061006F0020003100320033002000620065006C00E80020043D043E0432043E044104420438002005DC05E7002005E805D005EA0020FE8EFEE0FEA0FEE4FECBFE9300204EBA5927 2011-05-25 10:25:41.962079 [DEBUG] gsmopen_protocol.cpp:2602 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2602 ][interface1][-1, 0, 0] 1 ciao in=, inleft=76, out=, outleft=1000, converted=, utf8_out= 2011-05-25 10:25:41.962079 [DEBUG] gsmopen_protocol.cpp:2614 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2614 ][interface1][-1, 0, 0] iconv_res=0, in=, inleft=0, out=, outleft=933, converted=, utf8_out=ciao 123 bel猫 薪芯胁芯褋褌懈 诇拽 专讗转 锖庯粻锖狅护锘嬶簱 浜哄ぇ 2011-05-25 10:25:41.962079 [DEBUG] gsmopen_protocol.cpp:632 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 632 ][interface1][-1, 0, 0] sleeping for 500000 usec 2011-05-25 10:25:42.461918 [DEBUG] gsmopen_protocol.cpp:689 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 689 ][interface1][-1, 0, 0] sleeping for 500000 usec 2011-05-25 10:25:42.945855 [DEBUG] gsmopen_protocol.cpp:2362 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2362 ][interface1][-1, 0, 0] sending: AT 2011-05-25 10:25:42.945855 [DEBUG] gsmopen_protocol.cpp:2264 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2264 ][interface1][-1, 0, 0] sent data... (A) 2011-05-25 10:25:42.945855 [DEBUG] gsmopen_protocol.cpp:2246 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2246 ][interface1][-1, 0, 0] Error sending (T): -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:43.052861 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (T): 0 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:43.158728 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (T): 1 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:43.263940 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (T): 2 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:43.346794 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (T): 3 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:43.446754 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (T): 4 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:43.546738 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (T): 5 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:43.646742 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (T): 6 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:43.746669 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (T): 7 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:43.846762 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (T): 8 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:43.946646 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (T): 9 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:44.046635 [ERR] gsmopen_protocol.cpp:2259 rev 宸插鍑篬(nil)|37 ][ERRORA 2259 ][interface1][-1, 0, 0] Error RE-sending (T): 10 -1 (鏃犳晥鎴栦笉瀹屾暣鐨勫瀛楄妭瀛楃鎴栧瀛楃) 2011-05-25 10:25:44.046635 [ERR] gsmopen_protocol.cpp:2364 rev 宸插鍑篬(nil)|37 ][ERRORA 2364 ][interface1][-1, 0, 0] Error sending data... (鏃犳晥鎴栦笉瀹屾暣鐨勫瀛楄妭瀛楃鎴栧瀛楃) 2011-05-25 10:25:44.046635 [ERR] gsmopen_protocol.cpp:696 rev 宸插鍑篬(nil)|37 ][ERRORA 696 ][interface1][-1, 0, 0] no response to AT 2011-05-25 10:25:44.046635 [ERR] mod_gsmopen.cpp:1913 rev 宸插鍑篬(nil)|37 ][ERRORA 1913 ][interface1][-1, 0, 0] 2: gsmopen_serial_config failed, let's try again 2011-05-25 10:25:44.146615 [DEBUG] gsmopen_protocol.cpp:2581 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2581 ][interface1][-1, 0, 0] ucs2_in=006300690061006F0020003100320033002000620065006C00E80020043D043E0432043E044104420438002005DC05E7002005E805D005EA0020FE8EFEE0FEA0FEE4FECBFE9300204EBA5927 2011-05-25 10:25:44.146615 [DEBUG] gsmopen_protocol.cpp:2602 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2602 ][interface1][-1, 0, 0] 1 ciao in=, inleft=76, out=, outleft=1000, converted=, utf8_out= 2011-05-25 10:25:44.146615 [DEBUG] gsmopen_protocol.cpp:2614 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2614 ][interface1][-1, 0, 0] iconv_res=0, in=, inleft=0, out=, outleft=933, converted=, utf8_out=ciao 123 bel猫 薪芯胁芯褋褌懈 诇拽 专讗转 锖庯粻锖狅护锘嬶簱 浜哄ぇ 2011-05-25 10:25:44.146615 [DEBUG] gsmopen_protocol.cpp:632 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 632 ][interface1][-1, 0, 0] sleeping for 500000 usec 2011-05-25 10:25:44.659482 [DEBUG] gsmopen_protocol.cpp:689 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 689 ][interface1][-1, 0, 0] sleeping for 500000 usec 2011-05-25 10:25:45.159364 [DEBUG] gsmopen_protocol.cpp:2362 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2362 ][interface1][-1, 0, 0] sending: AT 2011-05-25 10:25:45.159364 [DEBUG] gsmopen_protocol.cpp:2246 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2246 ][interface1][-1, 0, 0] Error sending (A): -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:45.259338 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 0 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:45.359318 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 1 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:45.459297 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 2 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:45.559284 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 3 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:45.659269 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 4 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:45.759244 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 5 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:45.859225 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 6 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:45.959211 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 7 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:46.059224 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 8 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:46.159231 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 9 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:46.259170 [ERR] gsmopen_protocol.cpp:2259 rev 宸插鍑篬(nil)|37 ][ERRORA 2259 ][interface1][-1, 0, 0] Error RE-sending (A): 10 -1 (鏃犳晥鎴栦笉瀹屾暣鐨勫瀛楄妭瀛楃鎴栧瀛楃) 2011-05-25 10:25:46.259170 [ERR] gsmopen_protocol.cpp:2364 rev 宸插鍑篬(nil)|37 ][ERRORA 2364 ][interface1][-1, 0, 0] Error sending data... (鏃犳晥鎴栦笉瀹屾暣鐨勫瀛楄妭瀛楃鎴栧瀛楃) 2011-05-25 10:25:46.259170 [ERR] gsmopen_protocol.cpp:696 rev 宸插鍑篬(nil)|37 ][ERRORA 696 ][interface1][-1, 0, 0] no response to AT 2011-05-25 10:25:46.259170 [ERR] mod_gsmopen.cpp:1913 rev 宸插鍑篬(nil)|37 ][ERRORA 1913 ][interface1][-1, 0, 0] 3: gsmopen_serial_config failed, let's try again 2011-05-25 10:25:46.349267 [DEBUG] gsmopen_protocol.cpp:2581 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2581 ][interface1][-1, 0, 0] ucs2_in=006300690061006F0020003100320033002000620065006C00E80020043D043E0432043E044104420438002005DC05E7002005E805D005EA0020FE8EFEE0FEA0FEE4FECBFE9300204EBA5927 2011-05-25 10:25:46.349267 [DEBUG] gsmopen_protocol.cpp:2602 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2602 ][interface1][-1, 0, 0] 1 ciao in=, inleft=76, out=, outleft=1000, converted=, utf8_out= 2011-05-25 10:25:46.349267 [DEBUG] gsmopen_protocol.cpp:2614 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2614 ][interface1][-1, 0, 0] iconv_res=0, in=, inleft=0, out=, outleft=933, converted=, utf8_out=ciao 123 bel猫 薪芯胁芯褋褌懈 诇拽 专讗转 锖庯粻锖狅护锘嬶簱 浜哄ぇ 2011-05-25 10:25:46.349267 [DEBUG] gsmopen_protocol.cpp:632 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 632 ][interface1][-1, 0, 0] sleeping for 500000 usec 2011-05-25 10:25:46.849077 [DEBUG] gsmopen_protocol.cpp:689 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 689 ][interface1][-1, 0, 0] sleeping for 500000 usec 2011-05-25 10:25:47.348955 [DEBUG] gsmopen_protocol.cpp:2362 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2362 ][interface1][-1, 0, 0] sending: AT 2011-05-25 10:25:47.348955 [DEBUG] gsmopen_protocol.cpp:2246 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2246 ][interface1][-1, 0, 0] Error sending (A): -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:47.448923 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 0 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:47.548908 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 1 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:47.648879 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 2 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:47.748874 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 3 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:47.848821 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 4 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:47.948790 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 5 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:48.048751 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 6 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:48.148729 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 7 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:48.248690 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 8 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:48.348666 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 9 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:48.448626 [ERR] gsmopen_protocol.cpp:2259 rev 宸插鍑篬(nil)|37 ][ERRORA 2259 ][interface1][-1, 0, 0] Error RE-sending (A): 10 -1 (鏃犳晥鎴栦笉瀹屾暣鐨勫瀛楄妭瀛楃鎴栧瀛楃) 2011-05-25 10:25:48.448626 [ERR] gsmopen_protocol.cpp:2364 rev 宸插鍑篬(nil)|37 ][ERRORA 2364 ][interface1][-1, 0, 0] Error sending data... (鏃犳晥鎴栦笉瀹屾暣鐨勫瀛楄妭瀛楃鎴栧瀛楃) 2011-05-25 10:25:48.448626 [ERR] gsmopen_protocol.cpp:696 rev 宸插鍑篬(nil)|37 ][ERRORA 696 ][interface1][-1, 0, 0] no response to AT 2011-05-25 10:25:48.448626 [ERR] mod_gsmopen.cpp:1913 rev 宸插鍑篬(nil)|37 ][ERRORA 1913 ][interface1][-1, 0, 0] 4: gsmopen_serial_config failed, let's try again 2011-05-25 10:25:48.557620 [DEBUG] gsmopen_protocol.cpp:2581 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2581 ][interface1][-1, 0, 0] ucs2_in=006300690061006F0020003100320033002000620065006C00E80020043D043E0432043E044104420438002005DC05E7002005E805D005EA0020FE8EFEE0FEA0FEE4FECBFE9300204EBA5927 2011-05-25 10:25:48.557620 [DEBUG] gsmopen_protocol.cpp:2602 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2602 ][interface1][-1, 0, 0] 1 ciao in=, inleft=76, out=, outleft=1000, converted=, utf8_out= 2011-05-25 10:25:48.557620 [DEBUG] gsmopen_protocol.cpp:2614 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2614 ][interface1][-1, 0, 0] iconv_res=0, in=, inleft=0, out=, outleft=933, converted=, utf8_out=ciao 123 bel猫 薪芯胁芯褋褌懈 诇拽 专讗转 锖庯粻锖狅护锘嬶簱 浜哄ぇ 2011-05-25 10:25:48.557620 [DEBUG] gsmopen_protocol.cpp:632 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 632 ][interface1][-1, 0, 0] sleeping for 500000 usec 2011-05-25 10:25:49.057476 [DEBUG] gsmopen_protocol.cpp:689 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 689 ][interface1][-1, 0, 0] sleeping for 500000 usec 2011-05-25 10:25:49.557325 [DEBUG] gsmopen_protocol.cpp:2362 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2362 ][interface1][-1, 0, 0] sending: AT 2011-05-25 10:25:49.557325 [DEBUG] gsmopen_protocol.cpp:2246 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2246 ][interface1][-1, 0, 0] Error sending (A): -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:49.657297 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 0 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:49.757270 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 1 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:49.857348 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 2 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:49.957216 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 3 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:50.057183 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 4 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:50.157168 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 5 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:50.257146 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 6 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:50.357131 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 7 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:50.457108 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 8 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:50.557100 [DEBUG] gsmopen_protocol.cpp:2254 rev 宸插鍑篬(nil)|37 ][DEBUG_GSMOPEN 2254 ][interface1][-1, 0, 0] Error RE-sending (A): 9 -1 (璧勬簮鏆傛椂涓嶅彲鐢? 2011-05-25 10:25:50.658078 [ERR] gsmopen_protocol.cpp:2259 rev 宸插鍑篬(nil)|37 ][ERRORA 2259 ][interface1][-1, 0, 0] Error RE-sending (A): 10 -1 (鏃犳晥鎴栦笉瀹屾暣鐨勫瀛楄妭瀛楃鎴栧瀛楃) 2011-05-25 10:25:50.658078 [ERR] gsmopen_protocol.cpp:2364 rev 宸插鍑篬(nil)|37 ][ERRORA 2364 ][interface1][-1, 0, 0] Error sending data... (鏃犳晥鎴栦笉瀹屾暣鐨勫瀛楄妭瀛楃鎴栧瀛楃) 2011-05-25 10:25:50.658078 [ERR] gsmopen_protocol.cpp:696 rev 宸插鍑篬(nil)|37 ][ERRORA 696 ][interface1][-1, 0, 0] no response to AT 2011-05-25 10:25:50.658078 [ERR] mod_gsmopen.cpp:1913 rev 宸插鍑篬(nil)|37 ][ERRORA 1913 ][interface1][-1, 0, 0] 5: gsmopen_serial_config failed, let's try again 2011-05-25 10:25:50.658078 [ERR] mod_gsmopen.cpp:1917 rev 宸插鍑篬(nil)|37 ][ERRORA 1917 ][interface1][-1, 0, 0] STARTING interface_id=1 FAILED 2011-05-25 10:25:50.658078 [ERR] mod_gsmopen.cpp:3146 rev 宸插鍑篬(nil)|37 ][ERRORA 3146 ][interface1][-1, 0, 0] ALARM on interface interface1: 2011-05-25 10:25:50.658078 [NOTICE] switch_loadable_module.c:145 Adding Endpoint 'gsmopen' 2011-05-25 10:25:50.658078 [NOTICE] switch_loadable_module.c:274 Adding API Function 'gsm' 2011-05-25 10:25:50.658078 [NOTICE] switch_loadable_module.c:274 Adding API Function 'gsmopen' 2011-05-25 10:25:50.658078 [NOTICE] switch_loadable_module.c:274 Adding API Function 'gsmopen_boost_audio' 2011-05-25 10:25:50.658078 [NOTICE] switch_loadable_module.c:274 Adding API Function 'gsmopen_dump' 2011-05-25 10:25:50.658078 [NOTICE] switch_loadable_module.c:274 Adding API Function 'gsmopen_sendsms' 2011-05-25 10:25:50.658078 [NOTICE] switch_loadable_module.c:379 Adding Chat interface 'SMS' Regards Tang du -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/load-mod-gsmopen-error-tp64012... Sent from the freeswitch-users mailing list archive at Nabble.com.
On Wed, May 25, 2011 at 5:38 AM, tangdu <tang.du@hotmail.com> wrote:
I useing FS 1.0.7 ，Connected to nokia 3208C cellphone with usb。I can communicate with cellphone by minicom。When I load mod_gsmopen , following errors message. Have you compiled mod_gsmopen correctly? Perhaps the AT Command of 3208c dose not match ，I need to modify gsmopen.conf.xml.
Yep, compilation is ok. But it seems that the AT commands of 3208 are giving problems... -- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
Thanks for your help！ I will take another model cellphone to test it。 Best Regards Tang Du -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/load-mod-gsmopen-error-tp64012... Sent from the freeswitch-users mailing list archive at Nabble.com.
participants (2)
-
Giovanni Maruzzelli
-
tangdu