Hi, Im sure this has been beaten to death somewhere... but I have no idea where. I have spent most of the day trying to get this sorted out but now its just confounding me. OK ... I have a trixswitch 0.4 server that I want to add a tdm400p to. I install all of the requirements (gcc, make, kernel-devel) to actually compile zaptel and managed to get the card show the following [root@trixswitch1 conf]# ztcfg -vvv Zaptel Version: 1.4.12.1 Echo Canceller: MG2 Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels to configure. So all seems fine up to here. However starting freeswitch yields 2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open wanpipe.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open zt.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2155 zap_global_init() No modules configured! 2008-10-21 16:19:32 [ERR] mod_openzap.c:1861 mod_openzap_load() Error loading OpenZAP 2008-10-21 16:19:32 [CRIT] switch_loadable_module.c:734 switch_loadable_module_load_file() Error Loading module /opt/freeswitch/mod/mod_openzap.so **Module load routine returned an error** I have been messing arround with the conf/openzap.conf and conf/autoload_configs/openzap.conf.xml but that message is the only thing I can get it to show. I have checked the permissions on those files and moved them arround in between the config dirs... but still no luck. Any ideas? I know im missing something silly, I just dont know what?. Thanks, Sias
Does trixswitch build openzap by default? -MC Sent from my iPhone On Oct 21, 2008, at 7:28 AM, Sias Mey <sias@cpdata.co.za> wrote:
Hi,
Im sure this has been beaten to death somewhere... but I have no idea where. I have spent most of the day trying to get this sorted out but now its just confounding me.
OK ... I have a trixswitch 0.4 server that I want to add a tdm400p to. I install all of the requirements (gcc, make, kernel-devel) to actually compile zaptel and managed to get the card show the following
[root@trixswitch1 conf]# ztcfg -vvv
Zaptel Version: 1.4.12.1 Echo Canceller: MG2 Configuration ======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04)
4 channels to configure.
So all seems fine up to here. However starting freeswitch yields
2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open wanpipe.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open zt.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2155 zap_global_init() No modules configured! 2008-10-21 16:19:32 [ERR] mod_openzap.c:1861 mod_openzap_load() Error loading OpenZAP 2008-10-21 16:19:32 [CRIT] switch_loadable_module.c:734 switch_loadable_module_load_file() Error Loading module /opt/freeswitch/mod/mod_openzap.so **Module load routine returned an error**
I have been messing arround with the conf/openzap.conf and conf/autoload_configs/openzap.conf.xml but that message is the only thing I can get it to show. I have checked the permissions on those files and moved them arround in between the config dirs... but still no luck.
Any ideas? I know im missing something silly, I just dont know what?. Thanks, Sias
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
It would seem that way... since it is openzap complaining when it starts up. and there is a mod_openzap.so in the mods directory. On Tue, Oct 21, 2008 at 07:56:59AM -0700, Michael S Iokytwjnmiwqasxz Collins wrote:
Does trixswitch build openzap by default?
-MC
Sent from my iPhone
On Oct 21, 2008, at 7:28 AM, Sias Mey <sias@cpdata.co.za> wrote:
Hi,
Im sure this has been beaten to death somewhere... but I have no idea where. I have spent most of the day trying to get this sorted out but now its just confounding me.
OK ... I have a trixswitch 0.4 server that I want to add a tdm400p to. I install all of the requirements (gcc, make, kernel-devel) to actually compile zaptel and managed to get the card show the following
[root@trixswitch1 conf]# ztcfg -vvv
Zaptel Version: 1.4.12.1 Echo Canceller: MG2 Configuration ======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04)
4 channels to configure.
So all seems fine up to here. However starting freeswitch yields
2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open wanpipe.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open zt.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2155 zap_global_init() No modules configured! 2008-10-21 16:19:32 [ERR] mod_openzap.c:1861 mod_openzap_load() Error loading OpenZAP 2008-10-21 16:19:32 [CRIT] switch_loadable_module.c:734 switch_loadable_module_load_file() Error Loading module /opt/freeswitch/mod/mod_openzap.so **Module load routine returned an error**
I have been messing arround with the conf/openzap.conf and conf/autoload_configs/openzap.conf.xml but that message is the only thing I can get it to show. I have checked the permissions on those files and moved them arround in between the config dirs... but still no luck.
Any ideas? I know im missing something silly, I just dont know what?. Thanks, Sias
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Do you have wanpipe.conf and zt.conf in your conf directory? Are there any permissions issues that need to be addressed? -MC On Tue, Oct 21, 2008 at 8:25 AM, Sias Mey <sias@cpdata.co.za> wrote:
It would seem that way... since it is openzap complaining when it starts up.
and there is a mod_openzap.so in the mods directory.
On Tue, Oct 21, 2008 at 07:56:59AM -0700, Michael S Iokytwjnmiwqasxz Collins wrote:
Does trixswitch build openzap by default?
-MC
Sent from my iPhone
On Oct 21, 2008, at 7:28 AM, Sias Mey <sias@cpdata.co.za> wrote:
Hi,
Im sure this has been beaten to death somewhere... but I have no idea where. I have spent most of the day trying to get this sorted out but now its just confounding me.
OK ... I have a trixswitch 0.4 server that I want to add a tdm400p to. I install all of the requirements (gcc, make, kernel-devel) to actually compile zaptel and managed to get the card show the following
[root@trixswitch1 conf]# ztcfg -vvv
Zaptel Version: 1.4.12.1 Echo Canceller: MG2 Configuration ======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04)
4 channels to configure.
So all seems fine up to here. However starting freeswitch yields
2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open wanpipe.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open zt.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2155 zap_global_init() No modules configured! 2008-10-21 16:19:32 [ERR] mod_openzap.c:1861 mod_openzap_load() Error loading OpenZAP 2008-10-21 16:19:32 [CRIT] switch_loadable_module.c:734 switch_loadable_module_load_file() Error Loading module /opt/freeswitch/mod/mod_openzap.so **Module load routine returned an error**
I have been messing arround with the conf/openzap.conf and conf/autoload_configs/openzap.conf.xml but that message is the only thing I can get it to show. I have checked the permissions on those files and moved them arround in between the config dirs... but still no luck.
Any ideas? I know im missing something silly, I just dont know what?. Thanks, Sias
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I dont have a wanpipe.conf or zt.conf but all the documentation I can find say I need an openzap.conf. I was thinking permissions myself so I have tried pretty much everything I could there starting with the same permissions as the other configs and ending with world writable files and still no good, so I dont think its a permission issue. I am currently installing all the other stuff I need to checkout and compile from svn, since with nothing else to try that might at least be a step forward. Thanks, Sias On Tue, Oct 21, 2008 at 08:49:47AM -0700, Michael Collins wrote:
Do you have wanpipe.conf and zt.conf in your conf directory? Are there any permissions issues that need to be addressed? -MC
On Tue, Oct 21, 2008 at 8:25 AM, Sias Mey <[1]sias@cpdata.co.za> wrote:
It would seem that way... since it is openzap complaining when it starts up. and there is a mod_openzap.so in the mods directory.
On Tue, Oct 21, 2008 at 07:56:59AM -0700, Michael S Iokytwjnmiwqasxz Collins wrote:
Does trixswitch build openzap by default?
-MC
Sent from my iPhone
On Oct 21, 2008, at 7:28 AM, Sias Mey <[2]sias@cpdata.co.za> wrote:
Hi,
Im sure this has been beaten to death somewhere... but I have no idea where. I have spent most of the day trying to get this sorted out but now its just confounding me.
OK ... I have a trixswitch 0.4 server that I want to add a tdm400p to. I install all of the requirements (gcc, make, kernel-devel) to actually compile zaptel and managed to get the card show the following
[root@trixswitch1 conf]# ztcfg -vvv
Zaptel Version: [3]1.4.12.1 Echo Canceller: MG2 Configuration ======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04)
4 channels to configure.
So all seems fine up to here. However starting freeswitch yields
2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open wanpipe.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open zt.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2155 zap_global_init() No modules configured! 2008-10-21 16:19:32 [ERR] mod_openzap.c:1861 mod_openzap_load() Error loading OpenZAP 2008-10-21 16:19:32 [CRIT] switch_loadable_module.c:734 switch_loadable_module_load_file() Error Loading module /opt/freeswitch/mod/mod_openzap.so **Module load routine returned an error**
I have been messing arround with the conf/openzap.conf and conf/autoload_configs/openzap.conf.xml but that message is the only thing I can get it to show. I have checked the permissions on those files and moved them arround in between the config dirs... but still no luck.
Any ideas? I know im missing something silly, I just dont know what?. Thanks, Sias
_______________________________________________ Freeswitch-users mailing list [4]Freeswitch-users@lists.freeswitch.org [5]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:[6]http://lists.freeswitch.org/mailman/options/freeswitch-u sers
_______________________________________________ Freeswitch-users mailing list [8]Freeswitch-users@lists.freeswitch.org [9]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:[10]http://lists.freeswitch.org/mailman/options/freeswitch- users
Freeswitch-users mailing list [12]Freeswitch-users@lists.freeswitch.org [13]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:[14]http://lists.freeswitch.org/mailman/options/freeswitch- users [15]http://www.freeswitch.org
References
1. mailto:sias@cpdata.co.za 2. mailto:sias@cpdata.co.za 3. http://1.4.12.1/ 4. mailto:Freeswitch-users@lists.freeswitch.org 5. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 6. http://lists.freeswitch.org/mailman/options/freeswitch-users 7. http://www.freeswitch.org/ 8. mailto:Freeswitch-users@lists.freeswitch.org 9. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 10. http://lists.freeswitch.org/mailman/options/freeswitch-users 11. http://www.freeswitch.org/ 12. mailto:Freeswitch-users@lists.freeswitch.org 13. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 14. http://lists.freeswitch.org/mailman/options/freeswitch-users 15. http://www.freeswitch.org/
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I don't know about trixswitch but I do know about a regular svn checkout. These files get put into the conf directory: zt.conf, wanpipe.conf, pika.conf, tones.conf, and openzap.conf There was a change somewhat recently; formerly all of those files were found in /etc/openzap/ but that is no more. I don't know if trixswitch is up to date on that. Once you get downloaded make sure that you uncomment the line in src/modules.conf that has openzap because it is not built by default. When openzap builds (as part of the overall freeswitch build process) it will place the above files in the conf directory for you to edit as needed. If you do a "make samples" after the make && make install (and you should) then you will get all of the default config xml files, including conf/autoload_configs/openzap.conf.xml. Hope this helps! -MC On Tue, Oct 21, 2008 at 10:21 AM, Sias Mey <sias@cpdata.co.za> wrote:
I dont have a wanpipe.conf or zt.conf but all the documentation I can find say I need an openzap.conf.
I was thinking permissions myself so I have tried pretty much everything I could there starting with the same permissions as the other configs and ending with world writable files and still no good, so I dont think its a permission issue.
I am currently installing all the other stuff I need to checkout and compile from svn, since with nothing else to try that might at least be a step forward.
Thanks, Sias
On Tue, Oct 21, 2008 at 08:49:47AM -0700, Michael Collins wrote:
Do you have wanpipe.conf and zt.conf in your conf directory? Are there any permissions issues that need to be addressed? -MC
On Tue, Oct 21, 2008 at 8:25 AM, Sias Mey <[1]sias@cpdata.co.za> wrote:
It would seem that way... since it is openzap complaining when it starts up. and there is a mod_openzap.so in the mods directory.
On Tue, Oct 21, 2008 at 07:56:59AM -0700, Michael S Iokytwjnmiwqasxz Collins wrote:
Does trixswitch build openzap by default?
-MC
Sent from my iPhone
On Oct 21, 2008, at 7:28 AM, Sias Mey <[2]sias@cpdata.co.za> wrote:
Hi,
Im sure this has been beaten to death somewhere... but I have no idea where. I have spent most of the day trying to get this sorted out but now its just confounding me.
OK ... I have a trixswitch 0.4 server that I want to add a tdm400p to. I install all of the requirements (gcc, make, kernel-devel) to actually compile zaptel and managed to get the card show the following
[root@trixswitch1 conf]# ztcfg -vvv
Zaptel Version: [3]1.4.12.1 Echo Canceller: MG2 Configuration ======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04)
4 channels to configure.
So all seems fine up to here. However starting freeswitch yields
2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open wanpipe.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open zt.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2155 zap_global_init() No modules configured! 2008-10-21 16:19:32 [ERR] mod_openzap.c:1861 mod_openzap_load() Error loading OpenZAP 2008-10-21 16:19:32 [CRIT] switch_loadable_module.c:734 switch_loadable_module_load_file() Error Loading module /opt/freeswitch/mod/mod_openzap.so **Module load routine returned an error**
I have been messing arround with the conf/openzap.conf and conf/autoload_configs/openzap.conf.xml but that message is the only thing I can get it to show. I have checked the permissions on those files and moved them arround in between the config dirs... but still no luck.
Any ideas? I know im missing something silly, I just dont know what?. Thanks, Sias
_______________________________________________ Freeswitch-users mailing list [4]Freeswitch-users@lists.freeswitch.org [5]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:[6] http://lists.freeswitch.org/mailman/options/freeswitch-u sers
_______________________________________________ Freeswitch-users mailing list [8]Freeswitch-users@lists.freeswitch.org [9]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:[10] http://lists.freeswitch.org/mailman/options/freeswitch- users
Freeswitch-users mailing list [12]Freeswitch-users@lists.freeswitch.org [13]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:[14] http://lists.freeswitch.org/mailman/options/freeswitch- users [15]http://www.freeswitch.org
References
1. mailto:sias@cpdata.co.za 2. mailto:sias@cpdata.co.za 3. http://1.4.12.1/ 4. mailto:Freeswitch-users@lists.freeswitch.org 5. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 6. http://lists.freeswitch.org/mailman/options/freeswitch-users 7. http://www.freeswitch.org/ 8. mailto:Freeswitch-users@lists.freeswitch.org 9. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 10. http://lists.freeswitch.org/mailman/options/freeswitch-users 11. http://www.freeswitch.org/ 12. mailto:Freeswitch-users@lists.freeswitch.org 13. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 14. http://lists.freeswitch.org/mailman/options/freeswitch-users 15. http://www.freeswitch.org/
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Ah Ha ... That sounds to me like a greatly likely problem... hmmm I shall experiment further.. but I am thinking that trixswitch probably wanted the files in /etc ... Thank you very much for your help. I am really looking forward to some experimentation with this. Sias On Tue, Oct 21, 2008 at 11:59:00AM -0700, Michael Collins wrote:
I don't know about trixswitch but I do know about a regular svn checkout. These files get put into the conf directory: zt.conf, wanpipe.conf, pika.conf, tones.conf, and openzap.conf There was a change somewhat recently; formerly all of those files were found in /etc/openzap/ but that is no more. I don't know if trixswitch is up to date on that. Once you get downloaded make sure that you uncomment the line in src/modules.conf that has openzap because it is not built by default. When openzap builds (as part of the overall freeswitch build process) it will place the above files in the conf directory for you to edit as needed. If you do a "make samples" after the make && make install (and you should) then you will get all of the default config xml files, including conf/autoload_configs/openzap.conf.xml. Hope this helps! -MC
On Tue, Oct 21, 2008 at 10:21 AM, Sias Mey <[1]sias@cpdata.co.za> wrote:
I dont have a wanpipe.conf or zt.conf but all the documentation I can find say I need an openzap.conf. I was thinking permissions myself so I have tried pretty much everything I could there starting with the same permissions as the other configs and ending with world writable files and still no good, so I dont think its a permission issue. I am currently installing all the other stuff I need to checkout and compile from svn, since with nothing else to try that might at least be a step forward. Thanks, Sias
On Tue, Oct 21, 2008 at 08:49:47AM -0700, Michael Collins wrote:
Do you have wanpipe.conf and zt.conf in your conf directory? Are there any permissions issues that need to be addressed? -MC
On Tue, Oct 21, 2008 at 8:25 AM, Sias Mey <[1][2]sias@cpdata.co.za> wrote:
It would seem that way... since it is openzap complaining when it starts up. and there is a mod_openzap.so in the mods directory.
On Tue, Oct 21, 2008 at 07:56:59AM -0700, Michael S Iokytwjnmiwqasxz Collins wrote:
Does trixswitch build openzap by default?
-MC
Sent from my iPhone
On Oct 21, 2008, at 7:28 AM, Sias Mey <[2][3]sias@cpdata.co.za> wrote:
Hi,
Im sure this has been beaten to death somewhere... but I have no idea where. I have spent most of the day trying to get this sorted out but now its just confounding me.
OK ... I have a trixswitch 0.4 server that I want to add a tdm400p to. I install all of the requirements (gcc, make, kernel-devel) to actually compile zaptel and managed to get the card show the following
[root@trixswitch1 conf]# ztcfg -vvv
> > > Zaptel Version: [3][4]1.4.12.1
Echo Canceller: MG2 Configuration ======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04)
4 channels to configure.
So all seems fine up to here. However starting freeswitch yields
2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open wanpipe.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2082 process_module_config() Cannot open zt.conf 2008-10-21 16:19:32 [ERR] zap_io.c:2155 zap_global_init() No modules configured! 2008-10-21 16:19:32 [ERR] mod_openzap.c:1861 mod_openzap_load() Error loading OpenZAP 2008-10-21 16:19:32 [CRIT] switch_loadable_module.c:734 switch_loadable_module_load_file() Error Loading module /opt/freeswitch/mod/mod_openzap.so **Module load routine returned an error**
I have been messing arround with the conf/openzap.conf and conf/autoload_configs/openzap.conf.xml but that message is the only thing I can get it to show. I have checked the permissions on those files and moved them arround in between the config dirs... but still no luck.
Any ideas? I know im missing something silly, I just dont know what?. Thanks, Sias
_______________________________________________ Freeswitch-users mailing list
> > > [4][5]Freeswitch-users@lists.freeswitch.org > > > [5][6]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > > > UNSUBSCRIBE:[6][7]http://lists.freeswitch.org/mailman/options/freesw itch-u > sers > > > [7][8]http://www.freeswitch.org > > > > _______________________________________________ > > Freeswitch-users mailing list > > [8][9]Freeswitch-users@lists.freeswitch.org > > [9][10]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > > UNSUBSCRIBE:[10][11]http://lists.freeswitch.org/mailman/options/free switch- > users > > [11][12]http://www.freeswitch.org > _______________________________________________ > Freeswitch-users mailing list > [12][13]Freeswitch-users@lists.freeswitch.org > [13][14]http://lists.freeswitch.org/mailman/listinfo/freeswitch-user s > UNSUBSCRIBE:[14][15]http://lists.freeswitch.org/mailman/options/free switch- > users > [15][16]http://www.freeswitch.org > > References > > 1. mailto:[17]sias@cpdata.co.za > 2. mailto:[18]sias@cpdata.co.za > 3. [19]http://1.4.12.1/ > 4. mailto:[20]Freeswitch-users@lists.freeswitch.org > 5. [21]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > 6. [22]http://lists.freeswitch.org/mailman/options/freeswitch-users > 7. [23]http://www.freeswitch.org/ > 8. mailto:[24]Freeswitch-users@lists.freeswitch.org > 9. [25]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > 10. [26]http://lists.freeswitch.org/mailman/options/freeswitch-users > 11. [27]http://www.freeswitch.org/ > 12. mailto:[28]Freeswitch-users@lists.freeswitch.org > 13. [29]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > 14. [30]http://lists.freeswitch.org/mailman/options/freeswitch-users > 15. [31]http://www.freeswitch.org/
_______________________________________________ Freeswitch-users mailing list [32]Freeswitch-users@lists.freeswitch.org [33]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:[34]http://lists.freeswitch.org/mailman/options/freeswitch- users
Freeswitch-users mailing list [36]Freeswitch-users@lists.freeswitch.org [37]http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:[38]http://lists.freeswitch.org/mailman/options/freeswitch- users [39]http://www.freeswitch.org
References
1. mailto:sias@cpdata.co.za 2. mailto:sias@cpdata.co.za 3. mailto:sias@cpdata.co.za 4. http://1.4.12.1/ 5. mailto:Freeswitch-users@lists.freeswitch.org 6. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 7. http://lists.freeswitch.org/mailman/options/freeswitch-u 8. http://www.freeswitch.org/ 9. mailto:Freeswitch-users@lists.freeswitch.org 10. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 11. http://lists.freeswitch.org/mailman/options/freeswitch- 12. http://www.freeswitch.org/ 13. mailto:Freeswitch-users@lists.freeswitch.org 14. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 15. http://lists.freeswitch.org/mailman/options/freeswitch- 16. http://www.freeswitch.org/ 17. mailto:sias@cpdata.co.za 18. mailto:sias@cpdata.co.za 19. http://1.4.12.1/ 20. mailto:Freeswitch-users@lists.freeswitch.org 21. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 22. http://lists.freeswitch.org/mailman/options/freeswitch-users 23. http://www.freeswitch.org/ 24. mailto:Freeswitch-users@lists.freeswitch.org 25. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 26. http://lists.freeswitch.org/mailman/options/freeswitch-users 27. http://www.freeswitch.org/ 28. mailto:Freeswitch-users@lists.freeswitch.org 29. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 30. http://lists.freeswitch.org/mailman/options/freeswitch-users 31. http://www.freeswitch.org/ 32. mailto:Freeswitch-users@lists.freeswitch.org 33. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 34. http://lists.freeswitch.org/mailman/options/freeswitch-users 35. http://www.freeswitch.org/ 36. mailto:Freeswitch-users@lists.freeswitch.org 37. http://lists.freeswitch.org/mailman/listinfo/freeswitch-users 38. http://lists.freeswitch.org/mailman/options/freeswitch-users 39. http://www.freeswitch.org/
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Michael Collins
-
Michael S Iokytwjnmiwqasxz Collins
-
Sias Mey