FS compiled on rpi how to package?
hi, i have been using FS as PBX in multiple small offices and i always have been compiling from source on each rpi and its a bit of time consuming task so i was searching for a guide where i could simply compile and package the make install but didnt manage to find anything. does any1 do a similar task, if so some help would be appreciated. We dont plan to upload the package to any repository, will be be using to simply install and upgrade target rpi machines -- Regards, Bipin
We currently do not offer repositories for this but some people have approached me about working on this. If anyone is interested in working on this, we can help support by hosting repos and build boxes for this, please let us know.
On Jul 27, 2018, at 9:07 AM, Bipin Patel <bipin@xbipin.com> wrote:
hi,
i have been using FS as PBX in multiple small offices and i always have been compiling from source on each rpi and its a bit of time consuming task so i was searching for a guide where i could simply compile and package the make install but didnt manage to find anything.
does any1 do a similar task, if so some help would be appreciated. We dont plan to upload the package to any repository, will be be using to simply install and upgrade target rpi machines
I used to make armhf packages for FusionPBX but didn't keep it updated as they started building their own. I simply followed the guide here: https://freeswitch.org/confluence/display/FREESWITCH/Building+debs+for+other... Now that 1.8 is released I will be revisiting to see if I can make them for stretch but at the moment it will not build. You should be good for jessie though. 1.6.20 is in the FusionPBX repos but he doesn't make them browseable and I'm not sure if they will have all the modules you may want. On 30 July 2018 at 17:38, Michael Jerris <mike@jerris.com> wrote:
We currently do not offer repositories for this but some people have approached me about working on this. If anyone is interested in working on this, we can help support by hosting repos and build boxes for this, please let us know.
On Jul 27, 2018, at 9:07 AM, Bipin Patel <bipin@xbipin.com> wrote:
hi,
i have been using FS as PBX in multiple small offices and i always have been compiling from source on each rpi and its a bit of time consuming task so i was searching for a guide where i could simply compile and package the make install but didnt manage to find anything.
does any1 do a similar task, if so some help would be appreciated. We dont plan to upload the package to any repository, will be be using to simply install and upgrade target rpi machines
_________________________________________________________________________ Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
On Mon, Jul 30, 2018 at 12:38:03PM -0400, Michael Jerris wrote:
We currently do not offer repositories for this but some people have approached me about working on this. If anyone is interested in working on this, we can help support by hosting repos and build boxes for this, please let us know.
Hi all, FS 1.6 is part of OpenWrt 18.06, or will be once it's released. I don't have RPIs myself but there are packages compiled for it. RPI 1: https://downloads.openwrt.org/releases/packages-18.06/arm_arm1176jzf-s_vfp/t... RPI 2: https://downloads.openwrt.org/releases/packages-18.06/arm_cortex-a7_neon-vfp... RPI 3: https://downloads.openwrt.org/releases/packages-18.06/aarch64_cortex-a53/tel... The firmwares are here, currently RC2: https://downloads.openwrt.org/releases/18.06.0-rc2/targets/brcm2708/ I put up a short intro in the User Docs section here: https://openwrt.org/docs/guide-user/services/voip/freeswitch Kind regards, Seb
On Jul 27, 2018, at 9:07 AM, Bipin Patel <bipin@xbipin.com> wrote:
hi,
i have been using FS as PBX in multiple small offices and i always have been compiling from source on each rpi and its a bit of time consuming task so i was searching for a guide where i could simply compile and package the make install but didnt manage to find anything.
does any1 do a similar task, if so some help would be appreciated. We dont plan to upload the package to any repository, will be be using to simply install and upgrade target rpi machines
Thanks for the info but we have a small one line patch that we need to add to the master code and then specifically compile it for the rpi3 and that's why I need help finding any guide that can show the list of commands to run to create a Deb package which we can then simply install on other rpi devices. I tried checkinstall but in order to make that run I have to move all the spec files out of the FS folder and still it doesn't completely replicate exactly what make install does. If I manage to create the package I'll document it. I already have list of steps to follow to compile on the rpi for any version including dependencies but I guess the official and few other rpi install scripts already are there documented which work equally good. On July 30, 2018 9:21:04 PM Sebastian Kemper <sebastian_ml@gmx.net> wrote:
On Mon, Jul 30, 2018 at 12:38:03PM -0400, Michael Jerris wrote:
We currently do not offer repositories for this but some people have approached me about working on this. If anyone is interested in working on this, we can help support by hosting repos and build boxes for this, please let us know.
Hi all,
FS 1.6 is part of OpenWrt 18.06, or will be once it's released. I don't have RPIs myself but there are packages compiled for it.
RPI 1: https://downloads.openwrt.org/releases/packages-18.06/arm_arm1176jzf-s_vfp/t...
RPI 2: https://downloads.openwrt.org/releases/packages-18.06/arm_cortex-a7_neon-vfp...
RPI 3: https://downloads.openwrt.org/releases/packages-18.06/aarch64_cortex-a53/tel...
The firmwares are here, currently RC2: https://downloads.openwrt.org/releases/18.06.0-rc2/targets/brcm2708/
I put up a short intro in the User Docs section here:
https://openwrt.org/docs/guide-user/services/voip/freeswitch
Kind regards, Seb
On Jul 27, 2018, at 9:07 AM, Bipin Patel <bipin@xbipin.com> wrote:
hi,
i have been using FS as PBX in multiple small offices and i always have been compiling from source on each rpi and its a bit of time consuming task so i was searching for a guide where i could simply compile and package the make install but didnt manage to find anything.
does any1 do a similar task, if so some help would be appreciated. We dont plan to upload the package to any repository, will be be using to simply install and upgrade target rpi machines
The commands for building debs are documented on confluence, but they won’t help you as you’ll need to first package all the required dependencies. You’ll need to sort that out first. If you attempt to run the build it will fail telling you what packages are missing, then you’ll need to create those one at a time and put them in a repo. Look at stash under support deps for the source for missing packages or ask if you get stuck.
On Jul 30, 2018, at 3:48 PM, Bipin Patel <bipin@xbipin.com> wrote:
Thanks for the info but we have a small one line patch that we need to add to the master code and then specifically compile it for the rpi3 and that's why I need help finding any guide that can show the list of commands to run to create a Deb package which we can then simply install on other rpi devices. I tried checkinstall but in order to make that run I have to move all the spec files out of the FS folder and still it doesn't completely replicate exactly what make install does.
If I manage to create the package I'll document it. I already have list of steps to follow to compile on the rpi for any version including dependencies but I guess the official and few other rpi install scripts already are there documented which work equally good.
On July 30, 2018 9:21:04 PM Sebastian Kemper <sebastian_ml@gmx.net> wrote:
On Mon, Jul 30, 2018 at 12:38:03PM -0400, Michael Jerris wrote:
We currently do not offer repositories for this but some people have approached me about working on this. If anyone is interested in working on this, we can help support by hosting repos and build boxes for this, please let us know.
Hi all,
FS 1.6 is part of OpenWrt 18.06, or will be once it's released. I don't have RPIs myself but there are packages compiled for it.
RPI 1: https://downloads.openwrt.org/releases/packages-18.06/arm_arm1176jzf-s_vfp/t...
RPI 2: https://downloads.openwrt.org/releases/packages-18.06/arm_cortex-a7_neon-vfp...
RPI 3: https://downloads.openwrt.org/releases/packages-18.06/aarch64_cortex-a53/tel...
The firmwares are here, currently RC2: https://downloads.openwrt.org/releases/18.06.0-rc2/targets/brcm2708/
I put up a short intro in the User Docs section here:
https://openwrt.org/docs/guide-user/services/voip/freeswitch
Kind regards, Seb
On Jul 27, 2018, at 9:07 AM, Bipin Patel <bipin@xbipin.com> wrote:
hi,
i have been using FS as PBX in multiple small offices and i always have been compiling from source on each rpi and its a bit of time consuming task so i was searching for a guide where i could simply compile and package the make install but didnt manage to find anything.
does any1 do a similar task, if so some help would be appreciated. We dont plan to upload the package to any repository, will be be using to simply install and upgrade target rpi machines
do u mean dependencies to compile FS coz i have all those and i plan to install them on target rpi's then just install the FS deb? On 01-08-2018 20:19, Michael Jerris wrote:
The commands for building debs are documented on confluence, but they won't help you as you'll need to first package all the required dependencies. You'll need to sort that out first. If you attempt to run the build it will fail telling you what packages are missing, then you'll need to create those one at a time and put them in a repo. Look at stash under support deps for the source for missing packages or ask if you get stuck.
On Jul 30, 2018, at 3:48 PM, Bipin Patel <bipin@xbipin.com> wrote:
Thanks for the info but we have a small one line patch that we need to add to the master code and then specifically compile it for the rpi3 and that's why I need help finding any guide that can show the list of commands to run to create a Deb package which we can then simply install on other rpi devices. I tried checkinstall but in order to make that run I have to move all the spec files out of the FS folder and still it doesn't completely replicate exactly what make install does.
If I manage to create the package I'll document it. I already have list of steps to follow to compile on the rpi for any version including dependencies but I guess the official and few other rpi install scripts already are there documented which work equally good.
On July 30, 2018 9:21:04 PM Sebastian Kemper <sebastian_ml@gmx.net> wrote:
On Mon, Jul 30, 2018 at 12:38:03PM -0400, Michael Jerris wrote: We currently do not offer repositories for this but some people have approached me about working on this. If anyone is interested in working on this, we can help support by hosting repos and build boxes for this, please let us know. Hi all,
FS 1.6 is part of OpenWrt 18.06, or will be once it's released. I don't have RPIs myself but there are packages compiled for it.
RPI 1: https://downloads.openwrt.org/releases/packages-18.06/arm_arm1176jzf-s_vfp/t...
RPI 2: https://downloads.openwrt.org/releases/packages-18.06/arm_cortex-a7_neon-vfp...
RPI 3: https://downloads.openwrt.org/releases/packages-18.06/aarch64_cortex-a53/tel...
The firmwares are here, currently RC2: https://downloads.openwrt.org/releases/18.06.0-rc2/targets/brcm2708/
I put up a short intro in the User Docs section here:
https://openwrt.org/docs/guide-user/services/voip/freeswitch
Kind regards, Seb
On Jul 27, 2018, at 9:07 AM, Bipin Patel <bipin@xbipin.com> wrote:
hi,
i have been using FS as PBX in multiple small offices and i always have been compiling from source on each rpi and its a bit of time consuming task so i was searching for a guide where i could simply compile and package the make install but didnt manage to find anything.
does any1 do a similar task, if so some help would be appreciated. We dont plan to upload the package to any repository, will be be using to simply install and upgrade target rpi machines
Yes, in latest master there are new ones.
On Aug 1, 2018, at 12:27 PM, Bipin Patel <bipin@xbipin.com> wrote:
do u mean dependencies to compile FS coz i have all those and i plan to install them on target rpi's then just install the FS deb?
On 01-08-2018 20:19, Michael Jerris wrote:
The commands for building debs are documented on confluence, but they won't help you as you'll need to first package all the required dependencies. You'll need to sort that out first. If you attempt to run the build it will fail telling you what packages are missing, then you'll need to create those one at a time and put them in a repo. Look at stash under support deps for the source for missing packages or ask if you get stuck.
On Jul 30, 2018, at 3:48 PM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote:
Thanks for the info but we have a small one line patch that we need to add to the master code and then specifically compile it for the rpi3 and that's why I need help finding any guide that can show the list of commands to run to create a Deb package which we can then simply install on other rpi devices. I tried checkinstall but in order to make that run I have to move all the spec files out of the FS folder and still it doesn't completely replicate exactly what make install does.
If I manage to create the package I'll document it. I already have list of steps to follow to compile on the rpi for any version including dependencies but I guess the official and few other rpi install scripts already are there documented which work equally good.
On July 30, 2018 9:21:04 PM Sebastian Kemper <sebastian_ml@gmx.net <mailto:sebastian_ml@gmx.net>> wrote:
On Mon, Jul 30, 2018 at 12:38:03PM -0400, Michael Jerris wrote:
We currently do not offer repositories for this but some people have approached me about working on this. If anyone is interested in working on this, we can help support by hosting repos and build boxes for this, please let us know.
Hi all,
FS 1.6 is part of OpenWrt 18.06, or will be once it's released. I don't have RPIs myself but there are packages compiled for it.
RPI 1: https://downloads.openwrt.org/releases/packages-18.06/arm_arm1176jzf-s_vfp/t... <https://downloads.openwrt.org/releases/packages-18.06/arm_arm1176jzf-s_vfp/telephony/>
RPI 2: https://downloads.openwrt.org/releases/packages-18.06/arm_cortex-a7_neon-vfp... <https://downloads.openwrt.org/releases/packages-18.06/arm_cortex-a7_neon-vfpv4/telephony/>
RPI 3: https://downloads.openwrt.org/releases/packages-18.06/aarch64_cortex-a53/tel... <https://downloads.openwrt.org/releases/packages-18.06/aarch64_cortex-a53/telephony/>
The firmwares are here, currently RC2: https://downloads.openwrt.org/releases/18.06.0-rc2/targets/brcm2708/ <https://downloads.openwrt.org/releases/18.06.0-rc2/targets/brcm2708/>
I put up a short intro in the User Docs section here:
https://openwrt.org/docs/guide-user/services/voip/freeswitch <https://openwrt.org/docs/guide-user/services/voip/freeswitch>
Kind regards, Seb
On Jul 27, 2018, at 9:07 AM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote:
hi,
i have been using FS as PBX in multiple small offices and i always have been compiling from source on each rpi and its a bit of time consuming task so i was searching for a guide where i could simply compile and package the make install but didnt manage to find anything.
does any1 do a similar task, if so some help would be appreciated. We dont plan to upload the package to any repository, will be be using to simply install and upgrade target rpi machines
well i use the below command on stretch and then compile master and works just fine unless the dependencies list just changed yesterday sudo apt-get -y install autoconf automake devscripts gawk libjpeg-dev libncurses5-dev libtool-bin python-dev libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns-dev libpq-dev libsndfile-dev libopus-dev liblua5.1-0-dev g++ git-core libtool make pkg-config equivs mlocate git dpkg-dev sox flac dh-systemd yasm libogg-dev unixodbc-dev python-all-dev python-support erlang-dev doxygen uuid-dev libcurlpp0 libavformat-dev libswscale-dev libopencv-dev libhiredis-dev ladspa-sdk libmemcached-dev libsoundtouch-dev libflite1 flite1-dev libpjmedia-codec2 libasound2-dev portaudio19-dev libx11-dev librabbitmq-dev libsnmp-dev libmagickcore-dev libvorbis-dev libmp3lame-dev libmpg123-dev libshout3-dev libsndfile1-dev libflac-dev libvlc-dev default-jdk liblua5.2-dev libmono-2.0-dev mono-mcs libyaml-dev bison libbison-dev libjpeg62-turbo-dev On 01-08-2018 21:54, Michael Jerris wrote:
Yes, in latest master there are new ones.
On Aug 1, 2018, at 12:27 PM, Bipin Patel <bipin@xbipin.com> wrote:
do u mean dependencies to compile FS coz i have all those and i plan to install them on target rpi's then just install the FS deb?
On 01-08-2018 20:19, Michael Jerris wrote: The commands for building debs are documented on confluence, but they won't help you as you'll need to first package all the required dependencies. You'll need to sort that out first. If you attempt to run the build it will fail telling you what packages are missing, then you'll need to create those one at a time and put them in a repo. Look at stash under support deps for the source for missing packages or ask if you get stuck.
On Jul 30, 2018, at 3:48 PM, Bipin Patel <bipin@xbipin.com> wrote:
Thanks for the info but we have a small one line patch that we need to add to the master code and then specifically compile it for the rpi3 and that's why I need help finding any guide that can show the list of commands to run to create a Deb package which we can then simply install on other rpi devices. I tried checkinstall but in order to make that run I have to move all the spec files out of the FS folder and still it doesn't completely replicate exactly what make install does.
If I manage to create the package I'll document it. I already have list of steps to follow to compile on the rpi for any version including dependencies but I guess the official and few other rpi install scripts already are there documented which work equally good.
On July 30, 2018 9:21:04 PM Sebastian Kemper <sebastian_ml@gmx.net> wrote:
On Mon, Jul 30, 2018 at 12:38:03PM -0400, Michael Jerris wrote: We currently do not offer repositories for this but some people have approached me about working on this. If anyone is interested in working on this, we can help support by hosting repos and build boxes for this, please let us know. Hi all,
FS 1.6 is part of OpenWrt 18.06, or will be once it's released. I don't have RPIs myself but there are packages compiled for it.
RPI 1: https://downloads.openwrt.org/releases/packages-18.06/arm_arm1176jzf-s_vfp/t...
RPI 2: https://downloads.openwrt.org/releases/packages-18.06/arm_cortex-a7_neon-vfp...
RPI 3: https://downloads.openwrt.org/releases/packages-18.06/aarch64_cortex-a53/tel...
The firmwares are here, currently RC2: https://downloads.openwrt.org/releases/18.06.0-rc2/targets/brcm2708/
I put up a short intro in the User Docs section here:
https://openwrt.org/docs/guide-user/services/voip/freeswitch
Kind regards, Seb
On Jul 27, 2018, at 9:07 AM, Bipin Patel <bipin@xbipin.com> wrote:
hi,
i have been using FS as PBX in multiple small offices and i always have been compiling from source on each rpi and its a bit of time consuming task so i was searching for a guide where i could simply compile and package the make install but didnt manage to find anything.
does any1 do a similar task, if so some help would be appreciated. We dont plan to upload the package to any repository, will be be using to simply install and upgrade target rpi machines
_________________________________________________________________________ Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
That is missing some required for a full build, yes. Working on getting the repos for 64bit up and running for jessie and stretch and then I can provide more details. For sure missing broadvoice, codec2 and silk, there are others.
On Aug 3, 2018, at 1:27 AM, Bipin Patel <bipin@xbipin.com> wrote:
well i use the below command on stretch and then compile master and works just fine unless the dependencies list just changed yesterday
sudo apt-get -y install autoconf automake devscripts gawk libjpeg-dev libncurses5-dev libtool-bin python-dev libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns-dev libpq-dev libsndfile-dev libopus-dev liblua5.1-0-dev g++ git-core libtool make pkg-config equivs mlocate git dpkg-dev sox flac dh-systemd yasm libogg-dev unixodbc-dev python-all-dev python-support erlang-dev doxygen uuid-dev libcurlpp0 libavformat-dev libswscale-dev libopencv-dev libhiredis-dev ladspa-sdk libmemcached-dev libsoundtouch-dev libflite1 flite1-dev libpjmedia-codec2 libasound2-dev portaudio19-dev libx11-dev librabbitmq-dev libsnmp-dev libmagickcore-dev libvorbis-dev libmp3lame-dev libmpg123-dev libshout3-dev libsndfile1-dev libflac-dev libvlc-dev default-jdk liblua5.2-dev libmono-2.0-dev mono-mcs libyaml-dev bison libbison-dev libjpeg62-turbo-dev
On 01-08-2018 21:54, Michael Jerris wrote:
Yes, in latest master there are new ones.
On Aug 1, 2018, at 12:27 PM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote:
do u mean dependencies to compile FS coz i have all those and i plan to install them on target rpi's then just install the FS deb?
On 01-08-2018 20:19, Michael Jerris wrote:
The commands for building debs are documented on confluence, but they won't help you as you'll need to first package all the required dependencies. You'll need to sort that out first. If you attempt to run the build it will fail telling you what packages are missing, then you'll need to create those one at a time and put them in a repo. Look at stash under support deps for the source for missing packages or ask if you get stuck.
On Jul 30, 2018, at 3:48 PM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote:
Thanks for the info but we have a small one line patch that we need to add to the master code and then specifically compile it for the rpi3 and that's why I need help finding any guide that can show the list of commands to run to create a Deb package which we can then simply install on other rpi devices. I tried checkinstall but in order to make that run I have to move all the spec files out of the FS folder and still it doesn't completely replicate exactly what make install does.
If I manage to create the package I'll document it. I already have list of steps to follow to compile on the rpi for any version including dependencies but I guess the official and few other rpi install scripts already are there documented which work equally good.
On July 30, 2018 9:21:04 PM Sebastian Kemper <sebastian_ml@gmx.net <mailto:sebastian_ml@gmx.net>> wrote:
On Mon, Jul 30, 2018 at 12:38:03PM -0400, Michael Jerris wrote: We currently do not offer repositories for this but some people have approached me about working on this. If anyone is interested in working on this, we can help support by hosting repos and build boxes for this, please let us know.
Hi all,
FS 1.6 is part of OpenWrt 18.06, or will be once it's released. I don't have RPIs myself but there are packages compiled for it.
RPI 1: https://downloads.openwrt.org/releases/packages-18.06/arm_arm1176jzf-s_vfp/t... <https://downloads.openwrt.org/releases/packages-18.06/arm_arm1176jzf-s_vfp/telephony/>
RPI 2: https://downloads.openwrt.org/releases/packages-18.06/arm_cortex-a7_neon-vfp... <https://downloads.openwrt.org/releases/packages-18.06/arm_cortex-a7_neon-vfpv4/telephony/>
RPI 3: https://downloads.openwrt.org/releases/packages-18.06/aarch64_cortex-a53/tel... <https://downloads.openwrt.org/releases/packages-18.06/aarch64_cortex-a53/telephony/>
The firmwares are here, currently RC2: https://downloads.openwrt.org/releases/18.06.0-rc2/targets/brcm2708/ <https://downloads.openwrt.org/releases/18.06.0-rc2/targets/brcm2708/>
I put up a short intro in the User Docs section here:
https://openwrt.org/docs/guide-user/services/voip/freeswitch <https://openwrt.org/docs/guide-user/services/voip/freeswitch>
Kind regards, Seb
On Jul 27, 2018, at 9:07 AM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote:
hi,
i have been using FS as PBX in multiple small offices and i always have been compiling from source on each rpi and its a bit of time consuming task so i was searching for a guide where i could simply compile and package the make install but didnt manage to find anything.
does any1 do a similar task, if so some help would be appreciated. We dont plan to upload the package to any repository, will be be using to simply install and upgrade target rpi machines
_________________________________________________________________________ Professional FreeSWITCH Services sales@freeswitch.com <mailto:sales@freeswitch.com> https://freeswitch.com <https://freeswitch.com/>
Official FreeSWITCH Sites https://freeswitch.com/oss <https://freeswitch.com/oss> https://freeswitch.org/confluence <https://freeswitch.org/confluence> https://cluecon.com <https://cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> https://freeswitch.com <https://freeswitch.com/>
Yes I'm not doing full build, just the default enabled modules along with Python and xmlcurl and all that compiles just fine, tried it few mins back only and so far I need these modules only On August 3, 2018 7:54:48 PM Michael Jerris <mike@jerris.com> wrote:
That is missing some required for a full build, yes. Working on getting the repos for 64bit up and running for jessie and stretch and then I can provide more details. For sure missing broadvoice, codec2 and silk, there are others.
On Aug 3, 2018, at 1:27 AM, Bipin Patel <bipin@xbipin.com> wrote:
well i use the below command on stretch and then compile master and works just fine unless the dependencies list just changed yesterday sudo apt-get -y install autoconf automake devscripts gawk libjpeg-dev libncurses5-dev libtool-bin python-dev libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns-dev libpq-dev libsndfile-dev libopus-dev liblua5.1-0-dev g++ git-core libtool make pkg-config equivs mlocate git dpkg-dev sox flac dh-systemd yasm libogg-dev unixodbc-dev python-all-dev python-support erlang-dev doxygen uuid-dev libcurlpp0 libavformat-dev libswscale-dev libopencv-dev libhiredis-dev ladspa-sdk libmemcached-dev libsoundtouch-dev libflite1 flite1-dev libpjmedia-codec2 libasound2-dev portaudio19-dev libx11-dev librabbitmq-dev libsnmp-dev libmagickcore-dev libvorbis-dev libmp3lame-dev libmpg123-dev libshout3-dev libsndfile1-dev libflac-dev libvlc-dev default-jdk liblua5.2-dev libmono-2.0-dev mono-mcs libyaml-dev bison libbison-dev libjpeg62-turbo-dev
On 01-08-2018 21:54, Michael Jerris wrote:
Yes, in latest master there are new ones.
On Aug 1, 2018, at 12:27 PM, Bipin Patel <bipin@xbipin.com> wrote:
do u mean dependencies to compile FS coz i have all those and i plan to install them on target rpi's then just install the FS deb?
On 01-08-2018 20:19, Michael Jerris wrote: The commands for building debs are documented on confluence, but they won't help you as you'll need to first package all the required dependencies. You'll need to sort that out first. If you attempt to run the build it will fail telling you what packages are missing, then you'll need to create those one at a time and put them in a repo. Look at stash under support deps for the source for missing packages or ask if you get stuck.
On Jul 30, 2018, at 3:48 PM, Bipin Patel <bipin@xbipin.com> wrote:
Thanks for the info but we have a small one line patch that we need to add to the master code and then specifically compile it for the rpi3 and that's why I need help finding any guide that can show the list of commands to run to create a Deb package which we can then simply install on other rpi devices. I tried checkinstall but in order to make that run I have to move all the spec files out of the FS folder and still it doesn't completely replicate exactly what make install does.
If I manage to create the package I'll document it. I already have list of steps to follow to compile on the rpi for any version including dependencies but I guess the official and few other rpi install scripts already are there documented which work equally good.
On July 30, 2018 9:21:04 PM Sebastian Kemper <sebastian_ml@gmx.net> wrote:
On Mon, Jul 30, 2018 at 12:38:03PM -0400, Michael Jerris wrote: We currently do not offer repositories for this but some people have approached me about working on this. If anyone is interested in working on this, we can help support by hosting repos and build boxes for this, please let us know. Hi all,
FS 1.6 is part of OpenWrt 18.06, or will be once it's released. I don't have RPIs myself but there are packages compiled for it.
RPI 1: https://downloads.openwrt.org/releases/packages-18.06/arm_arm1176jzf-s_vfp/t...
RPI 2: https://downloads.openwrt.org/releases/packages-18.06/arm_cortex-a7_neon-vfp...
RPI 3: https://downloads.openwrt.org/releases/packages-18.06/aarch64_cortex-a53/tel...
The firmwares are here, currently RC2: https://downloads.openwrt.org/releases/18.06.0-rc2/targets/brcm2708/
I put up a short intro in the User Docs section here:
https://openwrt.org/docs/guide-user/services/voip/freeswitch
Kind regards, Seb
On Jul 27, 2018, at 9:07 AM, Bipin Patel <bipin@xbipin.com> wrote:
hi,
i have been using FS as PBX in multiple small offices and i always have been compiling from source on each rpi and its a bit of time consuming task so i was searching for a guide where i could simply compile and package the make install but didnt manage to find anything.
does any1 do a similar task, if so some help would be appreciated. We dont plan to upload the package to any repository, will be be using to simply install and upgrade target rpi machines
_________________________________________________________________________ Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
Hopefully the resulting packages can be used on Armbian to reach a broader range of SBC devices. For instance, the ODROID-XU4 or some of the newer BananaPI devices that have native POE. Devices whose network interfaces aren't diminished by their USB controllers. On Fri, Aug 3, 2018 at 8:54 AM, Michael Jerris <mike@jerris.com> wrote:
That is missing some required for a full build, yes. Working on getting the repos for 64bit up and running for jessie and stretch and then I can provide more details. For sure missing broadvoice, codec2 and silk, there are others.
On Aug 3, 2018, at 1:27 AM, Bipin Patel <bipin@xbipin.com> wrote:
well i use the below command on stretch and then compile master and works just fine unless the dependencies list just changed yesterday
sudo apt-get -y install autoconf automake devscripts gawk libjpeg-dev libncurses5-dev libtool-bin python-dev libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns-dev libpq-dev libsndfile-dev libopus-dev liblua5.1-0-dev g++ git-core libtool make pkg-config equivs mlocate git dpkg-dev sox flac dh-systemd yasm libogg-dev unixodbc-dev python-all-dev python-support erlang-dev doxygen uuid-dev libcurlpp0 libavformat-dev libswscale-dev libopencv-dev libhiredis-dev ladspa-sdk libmemcached-dev libsoundtouch-dev libflite1 flite1-dev libpjmedia-codec2 libasound2-dev portaudio19-dev libx11-dev librabbitmq-dev libsnmp-dev libmagickcore-dev libvorbis-dev libmp3lame-dev libmpg123-dev libshout3-dev libsndfile1-dev libflac-dev libvlc-dev default-jdk liblua5.2-dev libmono-2.0-dev mono-mcs libyaml-dev bison libbison-dev libjpeg62-turbo-dev
On 01-08-2018 21:54, Michael Jerris wrote:
Yes, in latest master there are new ones.
On Aug 1, 2018, at 12:27 PM, Bipin Patel <bipin@xbipin.com> wrote:
do u mean dependencies to compile FS coz i have all those and i plan to install them on target rpi's then just install the FS deb?
On 01-08-2018 20:19, Michael Jerris wrote:
The commands for building debs are documented on confluence, but they won't help you as you'll need to first package all the required dependencies. You'll need to sort that out first. If you attempt to run the build it will fail telling you what packages are missing, then you'll need to create those one at a time and put them in a repo. Look at stash under support deps for the source for missing packages or ask if you get stuck.
On Jul 30, 2018, at 3:48 PM, Bipin Patel <bipin@xbipin.com> wrote:
Thanks for the info but we have a small one line patch that we need to add to the master code and then specifically compile it for the rpi3 and that's why I need help finding any guide that can show the list of commands to run to create a Deb package which we can then simply install on other rpi devices. I tried checkinstall but in order to make that run I have to move all the spec files out of the FS folder and still it doesn't completely replicate exactly what make install does.
If I manage to create the package I'll document it. I already have list of steps to follow to compile on the rpi for any version including dependencies but I guess the official and few other rpi install scripts already are there documented which work equally good.
On July 30, 2018 9:21:04 PM Sebastian Kemper <sebastian_ml@gmx.net> wrote:
On Mon, Jul 30, 2018 at 12:38:03PM -0400, Michael Jerris wrote:
We currently do not offer repositories for this but some people have approached me about working on this. If anyone is interested in working on this, we can help support by hosting repos and build boxes for this, please let us know.
Hi all,
FS 1.6 is part of OpenWrt 18.06, or will be once it's released. I don't have RPIs myself but there are packages compiled for it.
RPI 1: https://downloads.openwrt.org/releases/packages-18.06/arm_ arm1176jzf-s_vfp/telephony/
RPI 2: https://downloads.openwrt.org/releases/packages-18.06/arm_ cortex-a7_neon-vfpv4/telephony/
RPI 3: https://downloads.openwrt.org/releases/packages-18.06/ aarch64_cortex-a53/telephony/
The firmwares are here, currently RC2: https://downloads.openwrt.org/releases/18.06.0-rc2/targets/brcm2708/
I put up a short intro in the User Docs section here:
https://openwrt.org/docs/guide-user/services/voip/freeswitch
Kind regards, Seb
On Jul 27, 2018, at 9:07 AM, Bipin Patel <bipin@xbipin.com> wrote:
hi,
i have been using FS as PBX in multiple small offices and i always have been compiling from source on each rpi and its a bit of time consuming task so i was searching for a guide where i could simply compile and package the make install but didnt manage to find anything.
does any1 do a similar task, if so some help would be appreciated. We dont plan to upload the package to any repository, will be be using to simply install and upgrade target rpi machines
_________________________________________________________________________ Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
_________________________________________________________________________ Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
participants (5)
-
Bipin Patel
-
Darren Williams
-
Michael Jerris
-
Sebastian Kemper
-
Tom Lynn