FS performance test -Hard disk alway busy when registerred 500 users
I'm makeing the load test of the FreeSWITCH, I registerred 500 users to FS, and make NO calls, then the LED of Hard disk alway blink meaning it always busy... below is my hardware configuration, would someone can help how to improve the performance? thanks in advance. i tried to increased the nonce-ttl to 600 from 60 tring to decrease the times of writing db. however it doesn't make help... attached is the internal.xml for reference. Windows server 2008 64bit. CPU: Intel Core2 Duo L7400 with Intel 310 1.5GHz, Memory: 2G, bit: 64bit, HD: 160G P.S. i can think about RAMDISK, however, I�m afraid of it is so stable... if it can be increase the performance by HD itself, it will be great. Regards, Charles
The recommendation is to use a RAM disk if you see performance problems. If your disk is "blinking" I wouldn't say that it's that much loaded though - in that case it should have a more or less steady light :) RAM disk shouldn't be a stability problem, and if you reboot your computer, FS will re-create all databases needed. Also make sure to use latest GIT, there have been some changes how the sqlite db handles are cached internally. /Peter Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Charles Skickat: den 29 mars 2011 11:08 Till: freeswitch-users Ämne: [Freeswitch-users] FS performance test -Hard disk alway busy when registerred 500 users I'm makeing the load test of the FreeSWITCH, I registerred 500 users to FS, and make NO calls, then the LED of Hard disk alway blink meaning it always busy... below is my hardware configuration, would someone can help how to improve the performance? thanks in advance. i tried to increased the nonce-ttl to 600 from 60 tring to decrease the times of writing db. however it doesn't make help... attached is the internal.xml for reference. Windows server 2008 64bit. CPU: Intel Core2 Duo L7400 with Intel 310 1.5GHz, Memory: 2G, bit: 64bit, HD: 160G P.S. i can think about RAMDISK, however, I'm afraid of it is so stable... if it can be increase the performance by HD itself, it will be great. Regards, Charles !DSPAM:4d91a2a832769362989175!
500 registered users with an expiry of 3600 seconds/1 hour gives you only one request every 7 seconds. What kind of registration timing do you have on your phones? -Avi On Tue, Mar 29, 2011 at 11:26 AM, Peter Olsson < peter.olsson@visionutveckling.se> wrote:
The recommendation is to use a RAM disk if you see performance problems. If your disk is “blinking” I wouldn’t say that it’s that much loaded though – in that case it should have a more or less steady light :) RAM disk shouldn’t be a stability problem, and if you reboot your computer, FS will re-create all databases needed.
Also make sure to use latest GIT, there have been some changes how the sqlite db handles are cached internally.
/Peter
*Från:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *För *Charles *Skickat:* den 29 mars 2011 11:08 *Till:* freeswitch-users *Ämne:* [Freeswitch-users] FS performance test -Hard disk alway busy when registerred 500 users
I'm makeing the load test of the FreeSWITCH, I registerred 500 users to FS, and make NO calls, then the LED of Hard disk alway blink meaning it always busy... below is my hardware configuration, would someone can help how to improve the performance? thanks in advance.
i tried to increased the nonce-ttl to 600 from 60 tring to decrease the times of writing db. however it doesn't make help...
attached is the internal.xml for reference.
Windows server 2008 64bit.
CPU: Intel Core2 Duo L7400 with Intel 310 1.5GHz,
Memory: 2G,
bit: 64bit,
HD: 160G
P.S. i can think about RAMDISK, however, I’m afraid of it is so stable... if it can be increase the performance by HD itself, it will be great.
Regards,
Charles
!DSPAM:4d91a2a832769362989175!
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Avi, You're right. the registertation timing is 60 seconds before 3600 seconds, meaning send regisetertion to FS every 3510 seconds, so i belive regiseration is not a issue... i think the performance consumption coming from freqentely update 'nonce' value to table 'sip_authentication' in the sofia_reg_internal.db, however, i already tired set the nonce-ttl to 600 seconds, it doensn't help.... now really don't know to what caused so mass HD I/O operation... but see the resource monior of the OS, it surely the most one is the writing sofia_reg_internal.db... Regards, Charles 2011/3/29, Avi Marcus <avi@avimarcus.net>:
500 registered users with an expiry of 3600 seconds/1 hour gives you only one request every 7 seconds. What kind of registration timing do you have on your phones? -Avi
On Tue, Mar 29, 2011 at 11:26 AM, Peter Olsson < peter.olsson@visionutveckling.se> wrote:
The recommendation is to use a RAM disk if you see performance problems. If your disk is “blinking” I wouldn’t say that it’s that much loaded though – in that case it should have a more or less steady light :) RAM disk shouldn’t be a stability problem, and if you reboot your computer, FS will re-create all databases needed.
Also make sure to use latest GIT, there have been some changes how the sqlite db handles are cached internally.
/Peter
*Från:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *För *Charles *Skickat:* den 29 mars 2011 11:08 *Till:* freeswitch-users *Ämne:* [Freeswitch-users] FS performance test -Hard disk alway busy when registerred 500 users
I'm makeing the load test of the FreeSWITCH, I registerred 500 users to FS, and make NO calls, then the LED of Hard disk alway blink meaning it always busy... below is my hardware configuration, would someone can help how to improve the performance? thanks in advance.
i tried to increased the nonce-ttl to 600 from 60 tring to decrease the times of writing db. however it doesn't make help...
attached is the internal.xml for reference.
Windows server 2008 64bit.
CPU: Intel Core2 Duo L7400 with Intel 310 1.5GHz,
Memory: 2G,
bit: 64bit,
HD: 160G
P.S. i can think about RAMDISK, however, I’m afraid of it is so stable... if it can be increase the performance by HD itself, it will be great.
Regards,
Charles
!DSPAM:4d91a2a832769362989175!
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Peter, Thanks for your prompt reponse and recommendation. I ever tried two ramdisk softwares (VSuite and DataRAM free edition), both work. Can you advise which one is preferred using in the production? or anyother recomended product running in windows platform? RAMDisk is a 'program' after all, i'm afraid whether it can be loaded prior to freeswitch service? if using ramdisk, we have to seperatedly install RAMdisk with FS package in the filed, it maybe involve work comparing one installation pakage... is there any windows native support Ramdisk like the one in Linux? sorry for coming up so many question :) Regards, Charles 2011/3/29, Peter Olsson <peter.olsson@visionutveckling.se>:
The recommendation is to use a RAM disk if you see performance problems. If your disk is "blinking" I wouldn't say that it's that much loaded though - in that case it should have a more or less steady light :) RAM disk shouldn't be a stability problem, and if you reboot your computer, FS will re-create all databases needed. Also make sure to use latest GIT, there have been some changes how the sqlite db handles are cached internally. /Peter Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Charles Skickat: den 29 mars 2011 11:08 Till: freeswitch-users Ämne: [Freeswitch-users] FS performance test -Hard disk alway busy when registerred 500 users
I'm makeing the load test of the FreeSWITCH, I registerred 500 users to FS, and make NO calls, then the LED of Hard disk alway blink meaning it always busy... below is my hardware configuration, would someone can help how to improve the performance? thanks in advance. i tried to increased the nonce-ttl to 600 from 60 tring to decrease the times of writing db. however it doesn't make help... attached is the internal.xml for reference.
Windows server 2008 64bit. CPU: Intel Core2 Duo L7400 with Intel 310 1.5GHz, Memory: 2G, bit: 64bit, HD: 160G
P.S. i can think about RAMDISK, however, I'm afraid of it is so stable... if it can be increase the performance by HD itself, it will be great.
Regards, Charles
!DSPAM:4d91a2a832769362989175!
Ahh - I didn't read you were on Windows.. :) Are you using latest git though - there has been lots of rewrites last month to handle cached sqlite handles better. /Peter -----Ursprungligt meddelande----- Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För fieldpeak Skickat: den 29 mars 2011 13:03 Till: FreeSWITCH Users Help Ämne: Re: [Freeswitch-users] FS performance test -Hard disk alway busy when registerred 500 users Hi Peter, Thanks for your prompt reponse and recommendation. I ever tried two ramdisk softwares (VSuite and DataRAM free edition), both work. Can you advise which one is preferred using in the production? or anyother recomended product running in windows platform? RAMDisk is a 'program' after all, i'm afraid whether it can be loaded prior to freeswitch service? if using ramdisk, we have to seperatedly install RAMdisk with FS package in the filed, it maybe involve work comparing one installation pakage... is there any windows native support Ramdisk like the one in Linux? sorry for coming up so many question :) Regards, Charles 2011/3/29, Peter Olsson <peter.olsson@visionutveckling.se>:
The recommendation is to use a RAM disk if you see performance problems. If your disk is "blinking" I wouldn't say that it's that much loaded though - in that case it should have a more or less steady light :) RAM disk shouldn't be a stability problem, and if you reboot your computer, FS will re-create all databases needed. Also make sure to use latest GIT, there have been some changes how the sqlite db handles are cached internally. /Peter Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Charles Skickat: den 29 mars 2011 11:08 Till: freeswitch-users Ämne: [Freeswitch-users] FS performance test -Hard disk alway busy when registerred 500 users
I'm makeing the load test of the FreeSWITCH, I registerred 500 users to FS, and make NO calls, then the LED of Hard disk alway blink meaning it always busy... below is my hardware configuration, would someone can help how to improve the performance? thanks in advance. i tried to increased the nonce-ttl to 600 from 60 tring to decrease the times of writing db. however it doesn't make help... attached is the internal.xml for reference.
Windows server 2008 64bit. CPU: Intel Core2 Duo L7400 with Intel 310 1.5GHz, Memory: 2G, bit: 64bit, HD: 160G
P.S. i can think about RAMDISK, however, I'm afraid of it is so stable... if it can be increase the performance by HD itself, it will be great.
Regards, Charles
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org !DSPAM:4d91bd9932761987414457!
Not yet, i will try the latest version tomorrow. wish it will be better :) 在 2011-3-29 下午8:17，"Peter Olsson" <peter.olsson@visionutveckling.se>编写： Ahh - I didn't read you were on Windows.. :) Are you using latest git though - there has been lots of rewrites last month to handle cached sqlite handles better. /Peter -----Ursprungligt meddelande----- Från: freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] För fieldpeak Skickat: den 29 mars 2011 13:03 Till: FreeSWITCH Users Help Ämne: Re: [Freeswitch-users] FS performance test -Hard disk alway busy when registerred 500 users Hi Peter, Thanks for your prompt reponse and recommendation. I ever tried two ramdisk softwares (... _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists... !DSPAM:4d91bd9932761987414457! _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lis...
I would also suggest that you not use Windows under this situation.
From what I experienced, running FreeSwitch under Windows does have a slight performance penalty. Running it under CentOS 5.x or the newer RHEL 6.x series does have a significant improvement over running the softswitch under Windows.
On Tue, Mar 29, 2011 at 5:25 AM, fieldpeak <fieldpeak@gmail.com> wrote:
Not yet, i will try the latest version tomorrow. wish it will be better :)
在 2011-3-29 下午8:17，"Peter Olsson" <peter.olsson@visionutveckling.se>编写：
Ahh - I didn't read you were on Windows.. :)
Are you using latest git though - there has been lots of rewrites last month to handle cached sqlite handles better.
/Peter
-----Ursprungligt meddelande----- Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För fieldpeak Skickat: den 29 mars 2011 13:03 Till: FreeSWITCH Users Help Ämne: Re: [Freeswitch-users] FS performance test -Hard disk alway busy when registerred 500 users
Hi Peter,
Thanks for your prompt reponse and recommendation.
I ever tried two ramdisk softwares (...
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists...
!DSPAM:4d91bd9932761987414457!
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lis...
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH builds as a native binary on Windows, there is no additional overhead versus any other platform. All performance testing is very subjective and highly dependant on the machine being tested and all of the other related hardware and infrastructure. -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/FS-performance-test-Hard-disk-... Sent from the freeswitch-users mailing list archive at Nabble.com.
Hi Peter, Tested with the latest GIT, the performace increase a lot, 1/10 Hardisk I/O that i used previous version. the LED of HD blink each 1-3 seconds, fully acceptable. Thanks for your valuable infomation!! 2011-03-30 Charles 发件人： Peter Olsson 发送时间： 2011-03-29 20:18:05 收件人： 'FreeSWITCH Users Help' 抄送： 主题： Re: [Freeswitch-users] FS performance test -Hard disk alway busywhen registerred 500 users Ahh - I didn't read you were on Windows.. :) Are you using latest git though - there has been lots of rewrites last month to handle cached sqlite handles better. /Peter -----Ursprungligt meddelande----- Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För fieldpeak Skickat: den 29 mars 2011 13:03 Till: FreeSWITCH Users Help Ämne: Re: [Freeswitch-users] FS performance test -Hard disk alway busy when registerred 500 users Hi Peter, Thanks for your prompt reponse and recommendation. I ever tried two ramdisk softwares (VSuite and DataRAM free edition), both work. Can you advise which one is preferred using in the production? or anyother recomended product running in windows platform? RAMDisk is a 'program' after all, i'm afraid whether it can be loaded prior to freeswitch service? if using ramdisk, we have to seperatedly install RAMdisk with FS package in the filed, it maybe involve work comparing one installation pakage... is there any windows native support Ramdisk like the one in Linux? sorry for coming up so many question :) Regards, Charles 2011/3/29, Peter Olsson <peter.olsson@visionutveckling.se>:
The recommendation is to use a RAM disk if you see performance problems. If your disk is "blinking" I wouldn't say that it's that much loaded though - in that case it should have a more or less steady light :) RAM disk shouldn't be a stability problem, and if you reboot your computer, FS will re-create all databases needed. Also make sure to use latest GIT, there have been some changes how the sqlite db handles are cached internally. /Peter Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Charles Skickat: den 29 mars 2011 11:08 Till: freeswitch-users Ämne: [Freeswitch-users] FS performance test -Hard disk alway busy when registerred 500 users
I'm makeing the load test of the FreeSWITCH, I registerred 500 users to FS, and make NO calls, then the LED of Hard disk alway blink meaning it always busy... below is my hardware configuration, would someone can help how to improve the performance? thanks in advance. i tried to increased the nonce-ttl to 600 from 60 tring to decrease the times of writing db. however it doesn't make help... attached is the internal.xml for reference.
Windows server 2008 64bit. CPU: Intel Core2 Duo L7400 with Intel 310 1.5GHz, Memory: 2G, bit: 64bit, HD: 160G
P.S. i can think about RAMDISK, however, I'm afraid of it is so stable... if it can be increase the performance by HD itself, it will be great.
Regards, Charles
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org !DSPAM:4d91bd9932761987414457! _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
No problem - good to know it helped! :) /Peter ________________________________________ Från: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org] för Charles [fieldpeak@gmail.com] Skickat: den 30 mars 2011 05:49 Till: FreeSWITCH Users Help; 'FreeSWITCH Users Help' Ämne: Re: [Freeswitch-users] FS performance test -Hard disk alway busywhen registerred 500 users Hi Peter, Tested with the latest GIT, the performace increase a lot, 1/10 Hardisk I/O that i used previous version. the LED of HD blink each 1-3 seconds, fully acceptable. Thanks for your valuable infomation!! 2011-03-30 ________________________________ Charles ________________________________ 发件人： Peter Olsson 发送时间： 2011-03-29 20:18:05 收件人： 'FreeSWITCH Users Help' 抄送： 主题： Re: [Freeswitch-users] FS performance test -Hard disk alway busywhen registerred 500 users Ahh - I didn't read you were on Windows.. :) Are you using latest git though - there has been lots of rewrites last month to handle cached sqlite handles better. /Peter -----Ursprungligt meddelande----- Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För fieldpeak Skickat: den 29 mars 2011 13:03 Till: FreeSWITCH Users Help Ämne: Re: [Freeswitch-users] FS performance test -Hard disk alway busy when registerred 500 users Hi Peter, Thanks for your prompt reponse and recommendation. I ever tried two ramdisk softwares (VSuite and DataRAM free edition), both work. Can you advise which one is preferred using in the production? or anyother recomended product running in windows platform? RAMDisk is a 'program' after all, i'm afraid whether it can be loaded prior to freeswitch service? if using ramdisk, we have to seperatedly install RAMdisk with FS package in the filed, it maybe involve work comparing one installation pakage... is there any windows native support Ramdisk like the one in Linux? sorry for coming up so many question :) Regards, Charles 2011/3/29, Peter Olsson <peter.olsson@visionutveckling.se>:
The recommendation is to use a RAM disk if you see performance problems. If your disk is "blinking" I wouldn't say that it's that much loaded though - in that case it should have a more or less steady light :) RAM disk shouldn't be a stability problem, and if you reboot your computer, FS will re-create all databases needed. Also make sure to use latest GIT, there have been some changes how the sqlite db handles are cached internally. /Peter Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Charles Skickat: den 29 mars 2011 11:08 Till: freeswitch-users Ämne: [Freeswitch-users] FS performance test -Hard disk alway busy when registerred 500 users
I'm makeing the load test of the FreeSWITCH, I registerred 500 users to FS, and make NO calls, then the LED of Hard disk alway blink meaning it always busy... below is my hardware configuration, would someone can help how to improve the performance? thanks in advance. i tried to increased the nonce-ttl to 600 from 60 tring to decrease the times of writing db. however it doesn't make help... attached is the internal.xml for reference.
Windows server 2008 64bit. CPU: Intel Core2 Duo L7400 with Intel 310 1.5GHz, Memory: 2G, bit: 64bit, HD: 160G
P.S. i can think about RAMDISK, however, I'm afraid of it is so stable... if it can be increase the performance by HD itself, it will be great.
Regards, Charles
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org !DSPAM:4d92a96732769097113148!
participants (6)
-
Avi Marcus
-
Charles
-
curriegrad2004
-
fieldpeak
-
Jeff Lenk
-
Peter Olsson