is it possible to deactivate completly any cdr without any side effect ? Thanks
You can turn it off: http://wiki.freeswitch.org/wiki/Variable_process_cdr <http://wiki.freeswitch.org/wiki/Variable_process_cdr>No side effect? Well, it won't affect the call flow (e.g. variables will still be set), but you won't get any CDRs saved.. It's all modular, so the mod_xml_cdr or mod_cdr_csv not saving the CDRs won't affect everything else.. (Oddly, you could even bill via mod_nibblebill but not keep CDRs. Sounds like a bad idea though.) -Avi On Sun, Apr 3, 2011 at 10:46 AM, Madovsky <infos@madovsky.org> wrote:
is it possible to deactivate completly any cdr without any side effect ?
Thanks
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
ok I wanted to be sure that turn off cdr was not a problem.for other modules (nibble bill for example)
Oddly, you could even bill via mod_nibblebill but not keep CDRs. Sounds like a bad idea though.) not so bad when you care of HD activity ;) ----- Original Message ----- From: Avi Marcus To: FreeSWITCH Users Help Sent: Sunday, April 03, 2011 6:02 AM Subject: Re: [Freeswitch-users] turn off cdr
You can turn it off: http://wiki.freeswitch.org/wiki/Variable_process_cdr No side effect? Well, it won't affect the call flow (e.g. variables will still be set), but you won't get any CDRs saved.. It's all modular, so the mod_xml_cdr or mod_cdr_csv not saving the CDRs won't affect everything else.. (Oddly, you could even bill via mod_nibblebill but not keep CDRs. Sounds like a bad idea though.) -Avi On Sun, Apr 3, 2011 at 10:46 AM, Madovsky <infos@madovsky.org> wrote: is it possible to deactivate completly any cdr without any side effect ? Thanks _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
unload module for cdr may be? -----Original Message----- From: "Madovsky" <infos@madovsky.org> Sender: freeswitch-users-bounces@lists.freeswitch.org Date: Sun, 3 Apr 2011 03:46:29 To: <freeswitch-users@lists.freeswitch.org> Reply-To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: [Freeswitch-users] turn off cdr _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
i have two media GWs connected with FS for PSTN calls, FS route the first one in normal case, once the first GW get full (all of channels were occupied), i need FS route to the second GW. i found once the first GW get full, it will reply '404 not found' to FS, can FS route to the second one according to this condition or any other alternative? although i know there is mod_distributor for load balancing, however, i need if only first one full then route to second one, so it looks this module not suitable for this senario... Thanks. Regards, Charles
If you know the number of calls the GW can handle in advance, you can limit the call attempts before sending the call to the gateway: http://wiki.freeswitch.org/wiki/Limit There are several ways to use that. You can reroute calls to a 2nd gateway on error: http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_bridge#Implementing_Fai... There are channel variables that let you control what to consider a reroutable error and what is a give-up error: http://wiki.freeswitch.org/wiki/Channel_Variables#continue_on_fail http://wiki.freeswitch.org/wiki/Channel_Variables#failure_causes This might also be useful, particularly with mod_limit: http://wiki.freeswitch.org/wiki/Channel_Variables#transfer_on_fail You could use mod_lcr to get a list of all the GWs, but in a random order. That'd let you load balance (randomly) but reroute when required without duplicates unlike mod_distributor. Hopefully that's enough building blocks to give you somewhere to start... -Steve On 20 April 2011 08:27, Charles <fieldpeak@gmail.com> wrote:
i have two media GWs connected with FS for PSTN calls, FS route the first one in normal case, once the first GW get full (all of channels were occupied), i need FS route to the second GW. i found once the first GW get full, it will reply '404 not found' to FS, can FS route to the second one according to this condition or any other alternative?
although i know there is mod_distributor for load balancing, however, i need if only first one full then route to second one, so it looks this module not suitable for this senario...
Thanks.
Regards, Charles
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Steve, Thanks for your so rich stuff provided. however, i tried to use error code to route as below, it failed (did not route the next GW when recevied UNALLOCATED_NUMBER), can you please point out is there any place wrong in the dailplan? attached is the log, thanks. <extension name="9_GW" > <condition field="destination_number" expression="^(9\d+)$"> <action application="set" data="continue_on_fail=true"/> <action application="set" data="hangup_after_bridge=false"/> <action application="bridge" data="sofia/internal/$1@192.168.200.201"/> </condition> <condition field="brige_hangup_cause" expression="UNALLOCATED_NUMBER"> <action application="bridge" data="sofia/internal/$1@192.168.200.202"/> </condition> </extension> Regards, Charles 2011/4/20, Steven Ayre <steveayre@gmail.com>:
If you know the number of calls the GW can handle in advance, you can limit the call attempts before sending the call to the gateway: http://wiki.freeswitch.org/wiki/Limit There are several ways to use that.
You can reroute calls to a 2nd gateway on error: http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_bridge#Implementing_Fai...
There are channel variables that let you control what to consider a reroutable error and what is a give-up error: http://wiki.freeswitch.org/wiki/Channel_Variables#continue_on_fail http://wiki.freeswitch.org/wiki/Channel_Variables#failure_causes This might also be useful, particularly with mod_limit: http://wiki.freeswitch.org/wiki/Channel_Variables#transfer_on_fail
You could use mod_lcr to get a list of all the GWs, but in a random order. That'd let you load balance (randomly) but reroute when required without duplicates unlike mod_distributor.
Hopefully that's enough building blocks to give you somewhere to start...
-Steve
On 20 April 2011 08:27, Charles <fieldpeak@gmail.com> wrote:
i have two media GWs connected with FS for PSTN calls, FS route the first one in normal case, once the first GW get full (all of channels were occupied), i need FS route to the second GW. i found once the first GW get full, it will reply '404 not found' to FS, can FS route to the second one according to this condition or any other alternative?
although i know there is mod_distributor for load balancing, however, i need if only first one full then route to second one, so it looks this module not suitable for this senario...
Thanks.
Regards, Charles
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Try this: <extension name="9_GW" > <condition field="destination_number" expression="^(9\d+)$"> <action application="set" data="continue_on_fail=true"/> <action application="set" data="failure_causes=UNALLOCATED_NUMBER"/> <action application="set" data="hangup_after_bridge=true"/> <action application="bridge" data="sofia/internal/$1@192.168.200.201"/> <action application="bridge" data="sofia/internal/$1@192.168.200.202"/> </condition> </extension> On Wed, Apr 20, 2011 at 10:58 AM, fieldpeak <fieldpeak@gmail.com> wrote:
Hi Steve,
Thanks for your so rich stuff provided.
however, i tried to use error code to route as below, it failed (did not route the next GW when recevied UNALLOCATED_NUMBER), can you please point out is there any place wrong in the dailplan? attached is the log, thanks.
<extension name="9_GW" >
<condition field="destination_number" expression="^(9\d+)$"> <action application="set" data="continue_on_fail=true"/> <action application="set" data="hangup_after_bridge=false"/> <action application="bridge" data="sofia/internal/$1@192.168.200.201"/> </condition>
<condition field="brige_hangup_cause" expression="UNALLOCATED_NUMBER"> <action application="bridge" data="sofia/internal/$1@192.168.200.202"/> </condition>
</extension>
Regards, Charles
2011/4/20, Steven Ayre <steveayre@gmail.com>:
If you know the number of calls the GW can handle in advance, you can limit the call attempts before sending the call to the gateway: http://wiki.freeswitch.org/wiki/Limit There are several ways to use that.
You can reroute calls to a 2nd gateway on error: http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_bridge#Implementing_Fai...
There are channel variables that let you control what to consider a reroutable error and what is a give-up error: http://wiki.freeswitch.org/wiki/Channel_Variables#continue_on_fail http://wiki.freeswitch.org/wiki/Channel_Variables#failure_causes This might also be useful, particularly with mod_limit: http://wiki.freeswitch.org/wiki/Channel_Variables#transfer_on_fail
You could use mod_lcr to get a list of all the GWs, but in a random order. That'd let you load balance (randomly) but reroute when required without duplicates unlike mod_distributor.
Hopefully that's enough building blocks to give you somewhere to start...
-Steve
On 20 April 2011 08:27, Charles <fieldpeak@gmail.com> wrote:
i have two media GWs connected with FS for PSTN calls, FS route the first one in normal case, once the first GW get full (all of channels were occupied), i need FS route to the second GW. i found once the first GW get full, it will reply '404 not found' to FS, can FS route to the second one according to this condition or any other alternative?
although i know there is mod_distributor for load balancing, however, i need if only first one full then route to second one, so it looks this module not suitable for this senario...
Thanks.
Regards, Charles
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
Thanks All, it is resolved now with below config. 2011/4/20, Kristian Kielhofner <kris@kriskinc.com>:
Try this:
<extension name="9_GW" > <condition field="destination_number" expression="^(9\d+)$"> <action application="set" data="continue_on_fail=true"/> <action application="set" data="failure_causes=UNALLOCATED_NUMBER"/> <action application="set" data="hangup_after_bridge=true"/> <action application="bridge" data="sofia/internal/$1@192.168.200.201"/> <action application="bridge" data="sofia/internal/$1@192.168.200.202"/> </condition> </extension>
On Wed, Apr 20, 2011 at 10:58 AM, fieldpeak <fieldpeak@gmail.com> wrote:
Hi Steve,
Thanks for your so rich stuff provided.
however, i tried to use error code to route as below, it failed (did not route the next GW when recevied UNALLOCATED_NUMBER), can you please point out is there any place wrong in the dailplan? attached is the log, thanks.
<extension name="9_GW" >
<condition field="destination_number" expression="^(9\d+)$"> <action application="set" data="continue_on_fail=true"/> <action application="set" data="hangup_after_bridge=false"/> <action application="bridge" data="sofia/internal/$1@192.168.200.201"/> </condition>
<condition field="brige_hangup_cause" expression="UNALLOCATED_NUMBER"> <action application="bridge" data="sofia/internal/$1@192.168.200.202"/> </condition>
</extension>
Regards, Charles
2011/4/20, Steven Ayre <steveayre@gmail.com>:
If you know the number of calls the GW can handle in advance, you can limit the call attempts before sending the call to the gateway: http://wiki.freeswitch.org/wiki/Limit There are several ways to use that.
You can reroute calls to a 2nd gateway on error: http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_bridge#Implementing_Fai...
There are channel variables that let you control what to consider a reroutable error and what is a give-up error: http://wiki.freeswitch.org/wiki/Channel_Variables#continue_on_fail http://wiki.freeswitch.org/wiki/Channel_Variables#failure_causes This might also be useful, particularly with mod_limit: http://wiki.freeswitch.org/wiki/Channel_Variables#transfer_on_fail
You could use mod_lcr to get a list of all the GWs, but in a random order. That'd let you load balance (randomly) but reroute when required without duplicates unlike mod_distributor.
Hopefully that's enough building blocks to give you somewhere to start...
-Steve
On 20 April 2011 08:27, Charles <fieldpeak@gmail.com> wrote:
i have two media GWs connected with FS for PSTN calls, FS route the first one in normal case, once the first GW get full (all of channels were occupied), i need FS route to the second GW. i found once the first GW get full, it will reply '404 not found' to FS, can FS route to the second one according to this condition or any other alternative?
although i know there is mod_distributor for load balancing, however, i need if only first one full then route to second one, so it looks this module not suitable for this senario...
Thanks.
Regards, Charles
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Charles, if you may, I would recommend you change the behaviour of this GW sending back a 404 when it's full... That's odd. It should rather use: 503 Service unavailable. David Ponzone Direction Technique email: david.ponzone@ipeva.fr tel: 01 74 03 18 97 gsm: 06 66 98 76 34 Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr - www.ipeva-studio.com Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur. Le 21/04/2011 à 04:45, fieldpeak a écrit :
Thanks All, it is resolved now with below config.
2011/4/20, Kristian Kielhofner <kris@kriskinc.com>:
Try this:
<extension name="9_GW" > <condition field="destination_number" expression="^(9\d+)$"> <action application="set" data="continue_on_fail=true"/> <action application="set" data="failure_causes=UNALLOCATED_NUMBER"/> <action application="set" data="hangup_after_bridge=true"/> <action application="bridge" data="sofia/internal/$1@192.168.200.201"/> <action application="bridge" data="sofia/internal/$1@192.168.200.202"/> </condition> </extension>
On Wed, Apr 20, 2011 at 10:58 AM, fieldpeak <fieldpeak@gmail.com> wrote:
Hi Steve,
Thanks for your so rich stuff provided.
however, i tried to use error code to route as below, it failed (did not route the next GW when recevied UNALLOCATED_NUMBER), can you please point out is there any place wrong in the dailplan? attached is the log, thanks.
<extension name="9_GW" >
<condition field="destination_number" expression="^(9\d+)$"> <action application="set" data="continue_on_fail=true"/> <action application="set" data="hangup_after_bridge=false"/> <action application="bridge" data="sofia/internal/$1@192.168.200.201"/> </condition>
<condition field="brige_hangup_cause" expression="UNALLOCATED_NUMBER"> <action application="bridge" data="sofia/internal/$1@192.168.200.202"/> </condition>
</extension>
Regards, Charles
2011/4/20, Steven Ayre <steveayre@gmail.com>:
If you know the number of calls the GW can handle in advance, you can limit the call attempts before sending the call to the gateway: http://wiki.freeswitch.org/wiki/Limit There are several ways to use that.
You can reroute calls to a 2nd gateway on error: http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_bridge#Implementing_Fai...
There are channel variables that let you control what to consider a reroutable error and what is a give-up error: http://wiki.freeswitch.org/wiki/Channel_Variables#continue_on_fail http://wiki.freeswitch.org/wiki/Channel_Variables#failure_causes This might also be useful, particularly with mod_limit: http://wiki.freeswitch.org/wiki/Channel_Variables#transfer_on_fail
You could use mod_lcr to get a list of all the GWs, but in a random order. That'd let you load balance (randomly) but reroute when required without duplicates unlike mod_distributor.
Hopefully that's enough building blocks to give you somewhere to start...
-Steve
On 20 April 2011 08:27, Charles <fieldpeak@gmail.com> wrote:
i have two media GWs connected with FS for PSTN calls, FS route the first one in normal case, once the first GW get full (all of channels were occupied), i need FS route to the second GW. i found once the first GW get full, it will reply '404 not found' to FS, can FS route to the second one according to this condition or any other alternative?
although i know there is mod_distributor for load balancing, however, i need if only first one full then route to second one, so it looks this module not suitable for this senario...
Thanks.
Regards, Charles
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Indeed... there's a specific ISDN clearing cause for it - 34 "no circuit/channel available" (NORMAL_CIRCUIT_CONGESTION). That maps to SIP 503 Service Unavailable (RFC3398). Unallocated number implies it's not allocated anywhere and therefore shouldn't reroute, while 503 suggests you should try another route. -Steve On 26 April 2011 09:35, David Ponzone <david.ponzone@ipeva.fr> wrote:
Charles,
if you may, I would recommend you change the behaviour of this GW sending back a 404 when it's full... That's odd. It should rather use: 503 Service unavailable.
David Ponzone Direction Technique email: david.ponzone@ipeva.fr tel: 01 74 03 18 97 gsm: 06 66 98 76 34
Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr - www.ipeva-studio.com
*Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. **IPeva** décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.* * *
Le 21/04/2011 à 04:45, fieldpeak a écrit :
Thanks All, it is resolved now with below config.
2011/4/20, Kristian Kielhofner <kris@kriskinc.com>:
Try this:
<extension name="9_GW" >
<condition field="destination_number" expression="^(9\d+)$">
<action application="set" data="continue_on_fail=true"/>
<action application="set" data="failure_causes=UNALLOCATED_NUMBER"/>
<action application="set" data="hangup_after_bridge=true"/>
<action application="bridge" data="sofia/internal/$1@192.168.200.201"/>
<action application="bridge" data="sofia/internal/$1@192.168.200.202"/>
</condition>
</extension>
On Wed, Apr 20, 2011 at 10:58 AM, fieldpeak <fieldpeak@gmail.com> wrote:
Hi Steve,
Thanks for your so rich stuff provided.
however, i tried to use error code to route as below, it failed (did
not route the next GW when recevied UNALLOCATED_NUMBER), can you
please point out is there any place wrong in the dailplan? attached is
the log, thanks.
<extension name="9_GW" >
<condition field="destination_number" expression="^(9\d+)$">
<action application="set" data="continue_on_fail=true"/>
<action application="set" data="hangup_after_bridge=false"/>
<action application="bridge"
data="sofia/internal/$1@192.168.200.201"/>
</condition>
<condition field="brige_hangup_cause" expression="UNALLOCATED_NUMBER">
<action application="bridge" data="sofia/internal/$1@192.168.200.202"/>
</condition>
</extension>
Regards,
Charles
2011/4/20, Steven Ayre <steveayre@gmail.com>:
If you know the number of calls the GW can handle in advance, you can
limit
the call attempts before sending the call to the gateway:
http://wiki.freeswitch.org/wiki/Limit
There are several ways to use that.
You can reroute calls to a 2nd gateway on error:
http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_bridge#Implementing_Fai...
There are channel variables that let you control what to consider a
reroutable error and what is a give-up error:
http://wiki.freeswitch.org/wiki/Channel_Variables#continue_on_fail
http://wiki.freeswitch.org/wiki/Channel_Variables#failure_causes
This might also be useful, particularly with mod_limit:
http://wiki.freeswitch.org/wiki/Channel_Variables#transfer_on_fail
You could use mod_lcr to get a list of all the GWs, but in a random
order.
That'd let you load balance (randomly) but reroute when required without
duplicates unlike mod_distributor.
Hopefully that's enough building blocks to give you somewhere to start...
-Steve
On 20 April 2011 08:27, Charles <fieldpeak@gmail.com> wrote:
i have two media GWs connected with FS for PSTN calls, FS route the
first
one in normal case, once the first GW get full (all of channels were
occupied), i need FS route to the second GW.
i found once the first GW get full, it will reply '404 not found' to FS,
can FS route to the second one according to this condition or any other
alternative?
although i know there is mod_distributor for load balancing, however, i
need if only first one full then route to second one, so it looks this
module not suitable for this senario...
Thanks.
Regards,
Charles
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
--
Kristian Kielhofner
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
yes...agree with you , 503 better than 404(maybe also reply 404 in some case that GW is not full...), thanks. Regards, Charles 在 2011-4-26 下午5:19，"Steven Ayre" <steveayre@gmail.com>写道：
Indeed... there's a specific ISDN clearing cause for it - 34 "no circuit/channel available" (NORMAL_CIRCUIT_CONGESTION). That maps to SIP 503 Service Unavailable (RFC3398).
Unallocated number implies it's not allocated anywhere and therefore shouldn't reroute, while 503 suggests you should try another route.
-Steve
On 26 April 2011 09:35, David Ponzone <david.ponzone@ipeva.fr> wrote:
Charles,
if you may, I would recommend you change the behaviour of this GW sending back a 404 when it's full... That's odd. It should rather use: 503 Service unavailable.
David Ponzone Direction Technique email: david.ponzone@ipeva.fr tel: 01 74 03 18 97 gsm: 06 66 98 76 34
Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr - www.ipeva-studio.com
*Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. **IPeva** décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.* * *
Le 21/04/2011 à 04:45, fieldpeak a écrit :
Thanks All, it is resolved now with below config.
2011/4/20, Kristian Kielhofner <kris@kriskinc.com>:
Try this:
<extension name="9_GW" >
<condition field="destination_number" expression="^(9\d+)$">
<action application="set" data="continue_on_fail=true"/>
<action application="set" data="failure_causes=UNALLOCATED_NUMBER"/>
<action application="set" data="hangup_after_bridge=true"/>
<action application="bridge" data="sofia/internal/$1@192.168.200.201"/>
<action application="bridge" data="sofia/internal/$1@192.168.200.202"/>
</condition>
</extension>
On Wed, Apr 20, 2011 at 10:58 AM, fieldpeak <fieldpeak@gmail.com> wrote:
Hi Steve,
Thanks for your so rich stuff provided.
however, i tried to use error code to route as below, it failed (did
not route the next GW when recevied UNALLOCATED_NUMBER), can you
please point out is there any place wrong in the dailplan? attached is
the log, thanks.
<extension name="9_GW" >
<condition field="destination_number" expression="^(9\d+)$">
<action application="set" data="continue_on_fail=true"/>
<action application="set" data="hangup_after_bridge=false"/>
<action application="bridge"
data="sofia/internal/$1@192.168.200.201"/>
</condition>
<condition field="brige_hangup_cause" expression="UNALLOCATED_NUMBER">
<action application="bridge" data="sofia/internal/$1@192.168.200.202"/>
</condition>
</extension>
Regards,
Charles
2011/4/20, Steven Ayre <steveayre@gmail.com>:
If you know the number of calls the GW can handle in advance, you can
limit
the call attempts before sending the call to the gateway:
http://wiki.freeswitch.org/wiki/Limit
There are several ways to use that.
You can reroute calls to a 2nd gateway on error:
http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_bridge#Implementing_Fai...
There are channel variables that let you control what to consider a
reroutable error and what is a give-up error:
http://wiki.freeswitch.org/wiki/Channel_Variables#continue_on_fail
http://wiki.freeswitch.org/wiki/Channel_Variables#failure_causes
This might also be useful, particularly with mod_limit:
http://wiki.freeswitch.org/wiki/Channel_Variables#transfer_on_fail
You could use mod_lcr to get a list of all the GWs, but in a random
order.
That'd let you load balance (randomly) but reroute when required without
duplicates unlike mod_distributor.
Hopefully that's enough building blocks to give you somewhere to start...
-Steve
On 20 April 2011 08:27, Charles <fieldpeak@gmail.com> wrote:
i have two media GWs connected with FS for PSTN calls, FS route the
first
one in normal case, once the first GW get full (all of channels were
occupied), i need FS route to the second GW.
i found once the first GW get full, it will reply '404 not found' to FS,
can FS route to the second one according to this condition or any other
alternative?
although i know there is mod_distributor for load balancing, however, i
need if only first one full then route to second one, so it looks this
module not suitable for this senario...
Thanks.
Regards,
Charles
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
--
Kristian Kielhofner
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
By default, when a "condition" block is completed (in your case after the first bridge) then execution of dialplan breaks and the inbound call is dropped. You can change this default behaviour with: break="never" in the first conditional block. In this case also the second conditional block is always executed. So your first conditional block will be: <condition field="destination_number" expression="^(9\d+)$" break="never"> .... Stephen On Wed, Apr 20, 2011 at 4:58 PM, fieldpeak <fieldpeak@gmail.com> wrote:
Hi Steve,
Thanks for your so rich stuff provided.
however, i tried to use error code to route as below, it failed (did not route the next GW when recevied UNALLOCATED_NUMBER), can you please point out is there any place wrong in the dailplan? attached is the log, thanks.
<extension name="9_GW" >
<condition field="destination_number" expression="^(9\d+)$"> <action application="set" data="continue_on_fail=true"/> <action application="set" data="hangup_after_bridge=false"/> <action application="bridge" data="sofia/internal/$1@192.168.200.201 "/> </condition>
<condition field="brige_hangup_cause" expression="UNALLOCATED_NUMBER"> <action application="bridge" data="sofia/internal/$1@192.168.200.202"/> </condition>
</extension>
Regards, Charles
2011/4/20, Steven Ayre <steveayre@gmail.com>:
If you know the number of calls the GW can handle in advance, you can limit the call attempts before sending the call to the gateway: http://wiki.freeswitch.org/wiki/Limit There are several ways to use that.
You can reroute calls to a 2nd gateway on error:
http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_bridge#Implementing_Fai...
There are channel variables that let you control what to consider a reroutable error and what is a give-up error: http://wiki.freeswitch.org/wiki/Channel_Variables#continue_on_fail http://wiki.freeswitch.org/wiki/Channel_Variables#failure_causes This might also be useful, particularly with mod_limit: http://wiki.freeswitch.org/wiki/Channel_Variables#transfer_on_fail
You could use mod_lcr to get a list of all the GWs, but in a random
order.
That'd let you load balance (randomly) but reroute when required without duplicates unlike mod_distributor.
Hopefully that's enough building blocks to give you somewhere to start...
-Steve
On 20 April 2011 08:27, Charles <fieldpeak@gmail.com> wrote:
i have two media GWs connected with FS for PSTN calls, FS route the
first
one in normal case, once the first GW get full (all of channels were occupied), i need FS route to the second GW. i found once the first GW get full, it will reply '404 not found' to FS, can FS route to the second one according to this condition or any other alternative?
although i know there is mod_distributor for load balancing, however, i need if only first one full then route to second one, so it looks this module not suitable for this senario...
Thanks.
Regards, Charles
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (9)
-
Avi Marcus
-
Budi wibowo
-
Charles
-
David Ponzone
-
fieldpeak
-
Kristian Kielhofner
-
Madovsky
-
Stephen Wilde
-
Steven Ayre