Hello, I'm getting the following error during configure. checking for APR... configure: error: the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file. configure: error: ./configure.gnu failed for libs/apr-util I'm running the following command to configure: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support Also, a lot of directories inside the libs require the configure script to be executable. I have to set this 1 by 1. Is there a way to disable apr? Or is it required by FS? Regards, Grant
Nevermind. I used the 1.4.15 tarball which contained this error. Now I've used the git clone master which works fine. From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Grant Bagdasarian Sent: Friday, January 23, 2015 11:51 AM To: FreeSWITCH Users Help (freeswitch-users@lists.freeswitch.org) Subject: [Freeswitch-users] APR issue when configuring Hello, I'm getting the following error during configure. checking for APR... configure: error: the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file. configure: error: ./configure.gnu failed for libs/apr-util I'm running the following command to configure: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support Also, a lot of directories inside the libs require the configure script to be executable. I have to set this 1 by 1. Is there a way to disable apr? Or is it required by FS? Regards, Grant
On what platform are you getting this error? Sent from my iPhone
On Jan 23, 2015, at 6:12 AM, Grant Bagdasarian <gb@cm.nl> wrote:
Nevermind. I used the 1.4.15 tarball which contained this error.
Now I’ve used the git clone master which works fine.
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Grant Bagdasarian Sent: Friday, January 23, 2015 11:51 AM To: FreeSWITCH Users Help (freeswitch-users@lists.freeswitch.org) Subject: [Freeswitch-users] APR issue when configuring
Hello,
I’m getting the following error during configure.
checking for APR... configure: error: the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file. configure: error: ./configure.gnu failed for libs/apr-util
I’m running the following command to configure: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support
Also, a lot of directories inside the libs require the configure script to be executable. I have to set this 1 by 1.
Is there a way to disable apr? Or is it required by FS?
Regards,
Grant _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.8 (wheezy) Release: 7.8 Codename: wheezy uname -a Linux HOSTNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice Sent: Friday, January 23, 2015 3:04 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring On what platform are you getting this error? Sent from my iPhone On Jan 23, 2015, at 6:12 AM, Grant Bagdasarian <gb@cm.nl<mailto:gb@cm.nl>> wrote: Nevermind. I used the 1.4.15 tarball which contained this error. Now I’ve used the git clone master which works fine. From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Grant Bagdasarian Sent: Friday, January 23, 2015 11:51 AM To: FreeSWITCH Users Help (freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org>) Subject: [Freeswitch-users] APR issue when configuring Hello, I’m getting the following error during configure. checking for APR... configure: error: the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file. configure: error: ./configure.gnu failed for libs/apr-util I’m running the following command to configure: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support Also, a lot of directories inside the libs require the configure script to be executable. I have to set this 1 by 1. Is there a way to disable apr? Or is it required by FS? Regards, Grant _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users<http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org
I¹m inclined to believe you have something broken on your box here. I just grabbed the tarball and built it right on my Wheezy box... How exactly are you trying to build it from the tarball? On 1/23/15, 8:49 AM, "Grant Bagdasarian" <gb@cm.nl> wrote:
lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.8 (wheezy) Release: 7.8 Codename: wheezy
uname -a Linux HOSTNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice Sent: Friday, January 23, 2015 3:04 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring
On what platform are you getting this error?
Sent from my iPhone
On Jan 23, 2015, at 6:12 AM, Grant Bagdasarian <gb@cm.nl> wrote:
Nevermind. I used the 1.4.15 tarball which contained this error.
Now I¹ve used the git clone master which works fine.
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Grant Bagdasarian Sent: Friday, January 23, 2015 11:51 AM To: FreeSWITCH Users Help (freeswitch-users@lists.freeswitch.org) Subject: [Freeswitch-users] APR issue when configuring
Hello,
I¹m getting the following error during configure.
checking for APR... configure: error: the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file. configure: error: ./configure.gnu failed for libs/apr-util
I¹m running the following command to configure: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support
Also, a lot of directories inside the libs require the configure script to be executable. I have to set this 1 by 1.
Is there a way to disable apr? Or is it required by FS?
Regards,
Grant
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch Twitter: @FreeSWITCH
Hello, I just extracted the tarball, installed a few missing dependencies and ran the configure command: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice Sent: Friday, January 23, 2015 4:44 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring I'm inclined to believe you have something broken on your box here. I just grabbed the tarball and built it right on my Wheezy box... How exactly are you trying to build it from the tarball? On 1/23/15, 8:49 AM, "Grant Bagdasarian" <gb@cm.nl> wrote: lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.8 (wheezy) Release: 7.8 Codename: wheezy uname -a Linux HOSTNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice Sent: Friday, January 23, 2015 3:04 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring On what platform are you getting this error? Sent from my iPhone On Jan 23, 2015, at 6:12 AM, Grant Bagdasarian <gb@cm.nl> wrote: Nevermind. I used the 1.4.15 tarball which contained this error. Now I've used the git clone master which works fine. From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Grant Bagdasarian Sent: Friday, January 23, 2015 11:51 AM To: FreeSWITCH Users Help (freeswitch-users@lists.freeswitch.org) Subject: [Freeswitch-users] APR issue when configuring Hello, I'm getting the following error during configure. checking for APR... configure: error: the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file. configure: error: ./configure.gnu failed for libs/apr-util I'm running the following command to configure: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support Also, a lot of directories inside the libs require the configure script to be executable. I have to set this 1 by 1. Is there a way to disable apr? Or is it required by FS? Regards, Grant _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org ________________________________ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch Twitter: @FreeSWITCH
is /usr/src/freeswitch your source directory too? Its a bit weird to be specifying that as prefix, maybe its an issue when specifying a prefix as the same as your source dir?
On Jan 26, 2015, at 12:51 AM, Grant Bagdasarian <GB@cm.nl> wrote:
Hello,
I just extracted the tarball, installed a few missing dependencies and ran the configure command: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice Sent: Friday, January 23, 2015 4:44 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring
I’m inclined to believe you have something broken on your box here. I just grabbed the tarball and built it right on my Wheezy box... How exactly are you trying to build it from the tarball?
On 1/23/15, 8:49 AM, "Grant Bagdasarian" <gb@cm.nl <x-msg://4/gb@cm.nl>> wrote:
lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.8 (wheezy) Release: 7.8 Codename: wheezy
uname -a Linux HOSTNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux
From: freeswitch-users-bounces@lists.freeswitch.org <x-msg://4/freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org>] On Behalf Of Ken Rice Sent: Friday, January 23, 2015 3:04 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring
On what platform are you getting this error?
Sent from my iPhone
On Jan 23, 2015, at 6:12 AM, Grant Bagdasarian <gb@cm.nl <x-msg://4/gb@cm.nl>> wrote:
Nevermind. I used the 1.4.15 tarball which contained this error.
Now I’ve used the git clone master which works fine.
From: freeswitch-users-bounces@lists.freeswitch.org <x-msg://4/freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org>] On Behalf Of Grant Bagdasarian Sent: Friday, January 23, 2015 11:51 AM To: FreeSWITCH Users Help (freeswitch-users@lists.freeswitch.org <x-msg://4/freeswitch-users@lists.freeswitch.org>) Subject: [Freeswitch-users] APR issue when configuring
Hello,
I’m getting the following error during configure.
checking for APR... configure: error: the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file. configure: error: ./configure.gnu failed for libs/apr-util
I’m running the following command to configure: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support
Also, a lot of directories inside the libs require the configure script to be executable. I have to set this 1 by 1.
Is there a way to disable apr? Or is it required by FS?
Also is that -prefix or --prefix you're using? On 26 January 2015 at 20:21, Michael Jerris <mike@jerris.com> wrote:
is /usr/src/freeswitch your source directory too? Its a bit weird to be specifying that as prefix, maybe its an issue when specifying a prefix as the same as your source dir?
On Jan 26, 2015, at 12:51 AM, Grant Bagdasarian <GB@cm.nl> wrote:
Hello,
I just extracted the tarball, installed a few missing dependencies and ran the configure command: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support
*From:* freeswitch-users-bounces@lists.freeswitch.org [ mailto:freeswitch-users-bounces@lists.freeswitch.org <freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *Ken Rice *Sent:* Friday, January 23, 2015 4:44 PM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] APR issue when configuring
I’m inclined to believe you have something broken on your box here. I just grabbed the tarball and built it right on my Wheezy box... How exactly are you trying to build it from the tarball?
On 1/23/15, 8:49 AM, "Grant Bagdasarian" <gb@cm.nl> wrote:
*lsb_release -a*No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.8 (wheezy) Release: 7.8 Codename: wheezy
*uname -a*Linux HOSTNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux
*From:* freeswitch-users-bounces@lists.freeswitch.org [ mailto:freeswitch-users-bounces@lists.freeswitch.org <freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *Ken Rice *Sent:* Friday, January 23, 2015 3:04 PM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] APR issue when configuring
On what platform are you getting this error?
Sent from my iPhone
On Jan 23, 2015, at 6:12 AM, Grant Bagdasarian <gb@cm.nl> wrote:
Nevermind. I used the 1.4.15 tarball which contained this error.
Now I’ve used the git clone master which works fine.
*From:* freeswitch-users-bounces@lists.freeswitch.org [ mailto:freeswitch-users-bounces@lists.freeswitch.org <freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *Grant Bagdasarian *Sent:* Friday, January 23, 2015 11:51 AM *To:* FreeSWITCH Users Help (freeswitch-users@lists.freeswitch.org) *Subject:* [Freeswitch-users] APR issue when configuring
Hello,
I’m getting the following error during configure.
checking for APR... configure: error: the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file. configure: error: ./configure.gnu failed for libs/apr-util
I’m running the following command to configure: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support
Also, a lot of directories inside the libs require the configure script to be executable. I have to set this 1 by 1.
Is there a way to disable apr? Or is it required by FS?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Its –prefix with a single -. Yes, the directory is /usr/src/freeswitch. I always use this parameter to install all the files in the same directory, else it installs in /usr/local/freeswitch I believe. From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Steven Ayre Sent: Monday, January 26, 2015 9:24 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring Also is that -prefix or --prefix you're using? On 26 January 2015 at 20:21, Michael Jerris <mike@jerris.com<mailto:mike@jerris.com>> wrote: is /usr/src/freeswitch your source directory too? Its a bit weird to be specifying that as prefix, maybe its an issue when specifying a prefix as the same as your source dir? On Jan 26, 2015, at 12:51 AM, Grant Bagdasarian <GB@cm.nl<mailto:GB@cm.nl>> wrote: Hello, I just extracted the tarball, installed a few missing dependencies and ran the configure command: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice Sent: Friday, January 23, 2015 4:44 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring I’m inclined to believe you have something broken on your box here. I just grabbed the tarball and built it right on my Wheezy box... How exactly are you trying to build it from the tarball? On 1/23/15, 8:49 AM, "Grant Bagdasarian" <gb@cm.nl<mailto:gb@cm.nl>> wrote: lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.8 (wheezy) Release: 7.8 Codename: wheezy uname -a Linux HOSTNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice Sent: Friday, January 23, 2015 3:04 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring On what platform are you getting this error? Sent from my iPhone On Jan 23, 2015, at 6:12 AM, Grant Bagdasarian <gb@cm.nl<mailto:gb@cm.nl>> wrote: Nevermind. I used the 1.4.15 tarball which contained this error. Now I’ve used the git clone master which works fine. From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Grant Bagdasarian Sent: Friday, January 23, 2015 11:51 AM To: FreeSWITCH Users Help (freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org>) Subject: [Freeswitch-users] APR issue when configuring Hello, I’m getting the following error during configure. checking for APR... configure: error: the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file. configure: error: ./configure.gnu failed for libs/apr-util I’m running the following command to configure: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support Also, a lot of directories inside the libs require the configure script to be executable. I have to set this 1 by 1. Is there a way to disable apr? Or is it required by FS? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
That should be --prefix (2 - in front of prefix) ... -prefix doesn¹t really do anything On 1/27/15, 1:14 AM, "Grant Bagdasarian" <gb@cm.nl> wrote:
Its prefix with a single -.
Yes, the directory is /usr/src/freeswitch. I always use this parameter to install all the files in the same directory, else it installs in /usr/local/freeswitch I believe.
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Steven Ayre Sent: Monday, January 26, 2015 9:24 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring
Also is that -prefix or --prefix you're using?
On 26 January 2015 at 20:21, Michael Jerris <mike@jerris.com> wrote:
is /usr/src/freeswitch your source directory too? Its a bit weird to be specifying that as prefix, maybe its an issue when specifying a prefix as the same as your source dir?
On Jan 26, 2015, at 12:51 AM, Grant Bagdasarian <GB@cm.nl> wrote:
Hello,
I just extracted the tarball, installed a few missing dependencies and ran the configure command:
./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice Sent: Friday, January 23, 2015 4:44 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring
I¹m inclined to believe you have something broken on your box here. I just grabbed the tarball and built it right on my Wheezy box... How exactly are you trying to build it from the tarball?
On 1/23/15, 8:49 AM, "Grant Bagdasarian" <gb@cm.nl> wrote:
lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.8 (wheezy) Release: 7.8 Codename: wheezy
uname -a Linux HOSTNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> ] On Behalf Of Ken Rice Sent: Friday, January 23, 2015 3:04 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring
On what platform are you getting this error?
Sent from my iPhone
On Jan 23, 2015, at 6:12 AM, Grant Bagdasarian <gb@cm.nl> wrote:
Nevermind. I used the 1.4.15 tarball which contained this error.
Now I¹ve used the git clone master which works fine.
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> ] On Behalf Of Grant Bagdasarian Sent: Friday, January 23, 2015 11:51 AM To: FreeSWITCH Users Help (freeswitch-users@lists.freeswitch.org) Subject: [Freeswitch-users] APR issue when configuring
Hello,
I¹m getting the following error during configure.
checking for APR... configure: error: the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file. configure: error: ./configure.gnu failed for libs/apr-util
I¹m running the following command to configure: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support
Also, a lot of directories inside the libs require the configure script to be executable. I have to set this 1 by 1.
Is there a way to disable apr? Or is it required by FS?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch Twitter: @FreeSWITCH
It'd be better to keep source and build separate. You could build in /usr/src/freeswitch and install to /opt/freeswitch for example. /usr/src shouldn't really be used for running a daemon. Since you're using Debian are you aware of the APT repository on files.freeswitch.org? That installs it to standard directories you would expect (/usr/bin/ /usr/sbin/ /etc/freeswitch and so on). On 27 January 2015 at 07:14, Grant Bagdasarian <gb@cm.nl> wrote:
Its –prefix with a single -.
Yes, the directory is /usr/src/freeswitch. I always use this parameter to install all the files in the same directory, else it installs in /usr/local/freeswitch I believe.
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Steven Ayre *Sent:* Monday, January 26, 2015 9:24 PM
*To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] APR issue when configuring
Also is that -prefix or --prefix you're using?
On 26 January 2015 at 20:21, Michael Jerris <mike@jerris.com> wrote:
is /usr/src/freeswitch your source directory too? Its a bit weird to be specifying that as prefix, maybe its an issue when specifying a prefix as the same as your source dir?
On Jan 26, 2015, at 12:51 AM, Grant Bagdasarian <GB@cm.nl> wrote:
Hello,
I just extracted the tarball, installed a few missing dependencies and ran the configure command:
./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support
*From:* freeswitch-users-bounces@lists.freeswitch.org [ mailto:freeswitch-users-bounces@lists.freeswitch.org <freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *Ken Rice *Sent:* Friday, January 23, 2015 4:44 PM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] APR issue when configuring
I’m inclined to believe you have something broken on your box here. I just grabbed the tarball and built it right on my Wheezy box... How exactly are you trying to build it from the tarball?
On 1/23/15, 8:49 AM, "Grant Bagdasarian" <gb@cm.nl> wrote:
*lsb_release -a *No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.8 (wheezy) Release: 7.8 Codename: wheezy
*uname -a *Linux HOSTNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux
*From:* freeswitch-users-bounces@lists.freeswitch.org [ mailto:freeswitch-users-bounces@lists.freeswitch.org <freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *Ken Rice *Sent:* Friday, January 23, 2015 3:04 PM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] APR issue when configuring
On what platform are you getting this error?
Sent from my iPhone
On Jan 23, 2015, at 6:12 AM, Grant Bagdasarian <gb@cm.nl> wrote:
Nevermind. I used the 1.4.15 tarball which contained this error.
Now I’ve used the git clone master which works fine.
*From:* freeswitch-users-bounces@lists.freeswitch.org [ mailto:freeswitch-users-bounces@lists.freeswitch.org <freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *Grant Bagdasarian *Sent:* Friday, January 23, 2015 11:51 AM *To:* FreeSWITCH Users Help (freeswitch-users@lists.freeswitch.org) *Subject:* [Freeswitch-users] APR issue when configuring
Hello,
I’m getting the following error during configure.
checking for APR... configure: error: the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file. configure: error: ./configure.gnu failed for libs/apr-util
I’m running the following command to configure: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support
Also, a lot of directories inside the libs require the configure script to be executable. I have to set this 1 by 1.
Is there a way to disable apr? Or is it required by FS?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks for the heads up! I wasn’t aware of the APT repository, thanks! From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Steven Ayre Sent: Tuesday, January 27, 2015 12:53 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring It'd be better to keep source and build separate. You could build in /usr/src/freeswitch and install to /opt/freeswitch for example. /usr/src shouldn't really be used for running a daemon. Since you're using Debian are you aware of the APT repository on files.freeswitch.org<http://files.freeswitch.org>? That installs it to standard directories you would expect (/usr/bin/ /usr/sbin/ /etc/freeswitch and so on). On 27 January 2015 at 07:14, Grant Bagdasarian <gb@cm.nl<mailto:gb@cm.nl>> wrote: Its –prefix with a single -. Yes, the directory is /usr/src/freeswitch. I always use this parameter to install all the files in the same directory, else it installs in /usr/local/freeswitch I believe. From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org>] On Behalf Of Steven Ayre Sent: Monday, January 26, 2015 9:24 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring Also is that -prefix or --prefix you're using? On 26 January 2015 at 20:21, Michael Jerris <mike@jerris.com<mailto:mike@jerris.com>> wrote: is /usr/src/freeswitch your source directory too? Its a bit weird to be specifying that as prefix, maybe its an issue when specifying a prefix as the same as your source dir? On Jan 26, 2015, at 12:51 AM, Grant Bagdasarian <GB@cm.nl<mailto:GB@cm.nl>> wrote: Hello, I just extracted the tarball, installed a few missing dependencies and ran the configure command: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice Sent: Friday, January 23, 2015 4:44 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring I’m inclined to believe you have something broken on your box here. I just grabbed the tarball and built it right on my Wheezy box... How exactly are you trying to build it from the tarball? On 1/23/15, 8:49 AM, "Grant Bagdasarian" <gb@cm.nl<mailto:gb@cm.nl>> wrote: lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.8 (wheezy) Release: 7.8 Codename: wheezy uname -a Linux HOSTNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice Sent: Friday, January 23, 2015 3:04 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] APR issue when configuring On what platform are you getting this error? Sent from my iPhone On Jan 23, 2015, at 6:12 AM, Grant Bagdasarian <gb@cm.nl<mailto:gb@cm.nl>> wrote: Nevermind. I used the 1.4.15 tarball which contained this error. Now I’ve used the git clone master which works fine. From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Grant Bagdasarian Sent: Friday, January 23, 2015 11:51 AM To: FreeSWITCH Users Help (freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org>) Subject: [Freeswitch-users] APR issue when configuring Hello, I’m getting the following error during configure. checking for APR... configure: error: the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file. configure: error: ./configure.gnu failed for libs/apr-util I’m running the following command to configure: ./configure -prefix=/usr/src/freeswitch/ --enable-core-odbc-support Also, a lot of directories inside the libs require the configure script to be executable. I have to set this 1 by 1. Is there a way to disable apr? Or is it required by FS? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Grant Bagdasarian
-
Ken Rice
-
Michael Jerris
-
Steven Ayre