How to set the IP of REGISTER message??
If my PC has two IP address, How to decide the IP which using to send REGISTER message?? For example, I have two IP , 172.30.30.XXX for External and 192.168.60.XXX for Internal, and now i want to add two gateway, one is 210.XXX.XXX.XXX and the other one is 192.168.60.30, How to change the IP that i want to use??
No you no longer have to do this. Please refer to the internal.xml profile in the default config. If you set the local-network-acl and then set ext-sip-ip and ext-rtp-ip then the profile will figure out which IP to use based on the destination or source of the request/ response. /b On Sep 20, 2009, at 11:27 PM, Frank Carmickle wrote:
You need to create different sofia profiles for each. Then you can define the gateway in each.
--FC
On Mon, Sep 21, Brian West wrote:
No you no longer have to do this. Please refer to the internal.xml profile in the default config. If you set the local-network-acl and then set ext-sip-ip and ext-rtp-ip then the profile will figure out which IP to use based on the destination or source of the request/ response.
With two interfaces? Isn't it required for both of the interfaces to be bound to sofia? If that is true then isn't it only possible to bind one address per profile? --FC
yes but you can lie about IP's in the via/to and from if you set the local-network-acl ... I'm not talking two physical interfaces on FreeSWITCH... because that is one of the harder scenarios to setup... I'm talking single interface on FS sitting behind a nat router which is the most common. /b On Sep 21, 2009, at 4:45 AM, Frank Carmickle wrote:
With two interfaces? Isn't it required for both of the interfaces to be bound to sofia? If that is true then isn't it only possible to bind one address per profile?
--FC
participants (3)
-
Brad Tuan
-
Brian West
-
Frank Carmickle