Default configuration?
Hi. Doing a standard package-managed installation of Freeswitch under Debian using https://freeswitch.org/confluence/display/FREESWITCH/Debian+10+Buster I see that there are 20 internal extensions 1000 - 1019 already defined, and I've successfully registered a couple of phones to 1000 and 1001. Am I right in thinking that the default dialplan is supposed to allow calls between internal extensions, or do I have to configure something else for this to work? My setup is: - FreeSwitch installed under Debian 10 Buster on my home network 192.168.78.0/24 - two telephones configured manually to register to the FreeSwitch server, also on the same network 192.168.78.0/24 Result: - both telephones register to FreeSwitch successfully - dialling from one extension to the other causes the second extension to ring, and can be answered, but the SDP contents of the Invite requests from FreeSwitch to each telephone tell them both to send audio to the *external address* of my Internet router, not either the internal address of my FreeSwitch server, or the internal address of the other telephone. Obviously this doesn't work. This happens whether or not I start FreeSwitch with the "-nonat" option. So, I'm thinking there must be something simple that I'm failing to understand about the default configuration of FreeSwitch, because I thought that calling from one internal extension to the other was about the simplest test I could perform. Can anyone point me at "how to get started" for a simple scenario such as this? Thanks, Antony. -- Schrödinger's rule of data integrity: the condition of any backup is unknown until a restore is attempted. Please reply to the list; please *don't* CC me.
Did you change your default password? On Thu, Sep 9, 2021 at 11:59 AM Antony Stone < Antony.Stone@freeswitch.open.source.it> wrote:
Hi.
Doing a standard package-managed installation of Freeswitch under Debian using https://freeswitch.org/confluence/display/FREESWITCH/Debian+10+Buster I see that there are 20 internal extensions 1000 - 1019 already defined, and I've successfully registered a couple of phones to 1000 and 1001.
Am I right in thinking that the default dialplan is supposed to allow calls between internal extensions, or do I have to configure something else for this to work?
My setup is:
- FreeSwitch installed under Debian 10 Buster on my home network 192.168.78.0/24
- two telephones configured manually to register to the FreeSwitch server, also on the same network 192.168.78.0/24
Result:
- both telephones register to FreeSwitch successfully
- dialling from one extension to the other causes the second extension to ring, and can be answered, but the SDP contents of the Invite requests from FreeSwitch to each telephone tell them both to send audio to the *external address* of my Internet router, not either the internal address of my FreeSwitch server, or the internal address of the other telephone.
Obviously this doesn't work.
This happens whether or not I start FreeSwitch with the "-nonat" option.
So, I'm thinking there must be something simple that I'm failing to understand about the default configuration of FreeSwitch, because I thought that calling from one internal extension to the other was about the simplest test I could perform.
Can anyone point me at "how to get started" for a simple scenario such as this?
Thanks,
Antony.
-- Schrödinger's rule of data integrity: the condition of any backup is unknown until a restore is attempted.
Please reply to the list; please *don't* CC me.
_________________________________________________________________________
The FreeSWITCH project is sponsored by SignalWire https://signalwire.com Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services. Build your next product on our scalable cloud platform.
Join our online community to chat in real time https://signalwire.community
Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
-- Brian West | Co-founder and Developer Need Commercial support? email sales@freeswitch.com FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045 <https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g> Email: brian@freeswitch.com Mobile: 918-424-9378 Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/> [image: https://www.facebook.com/signalwireinc?src=email] <https://www.facebook.com/freeswitch> [image: https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
On Thursday 09 September 2021 at 19:06:12, Brian West wrote:
Did you change your default password?
Sorry, should have put that detail in - yes I did :)
On Thu, Sep 9, 2021 at 11:59 AM Antony Stone wrote:
Hi.
Doing a standard package-managed installation of Freeswitch under Debian using https://freeswitch.org/confluence/display/FREESWITCH/Debian+10+Buster I see that there are 20 internal extensions 1000 - 1019 already defined, and I've successfully registered a couple of phones to 1000 and 1001.
Am I right in thinking that the default dialplan is supposed to allow calls between internal extensions, or do I have to configure something else for this to work?
My setup is: - FreeSwitch installed under Debian 10 Buster on my home network 192.168.78.0/24
- two telephones configured manually to register to the FreeSwitch server, also on the same network 192.168.78.0/24
Result: - both telephones register to FreeSwitch successfully
- dialling from one extension to the other causes the second extension to ring, and can be answered, but the SDP contents of the Invite requests from FreeSwitch to each telephone tell them both to send audio to the *external address* of my Internet router, not either the internal address of my FreeSwitch server, or the internal address of the other telephone.
Obviously this doesn't work.
This happens whether or not I start FreeSwitch with the "-nonat" option.
So, I'm thinking there must be something simple that I'm failing to understand about the default configuration of FreeSwitch, because I thought that calling from one internal extension to the other was about the simplest test I could perform.
Can anyone point me at "how to get started" for a simple scenario such as this?
Thanks,
Antony.
-- BASIC is to computer languages what Roman numerals are to arithmetic. Please reply to the list; please *don't* CC me.
participants (2)
-
Antony Stone
-
Brian West