Anyone running this with their latest 2.2.1 release successfully using Digium analog TDM cards? Is it known to work fine, or possibly not been tested yet? Thanks, jlc
On Wed, Jan 27, 2010 at 12:19 PM, Joseph L. Casale < jcasale@activenetwerx.com> wrote:
Anyone running this with their latest 2.2.1 release successfully using Digium analog TDM cards? Is it known to work fine, or possibly not been tested yet?
To my knowledge, neither one. The best answer I can give you is "it should work", the dahdi driver API do not change often and previous versions of DAHDI were tested just fine. -- Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com
"Joseph L. Casale" <jcasale@activenetwerx.com> said:
Anyone running this with their latest 2.2.1 release successfully using Digium analog TDM cards? Is it known to work fine, or possibly not been tested yet?
It's working OK here. We're actually using 2.2.1RC2 with a TE110P in a VZ environment. -- Russell Mosemann ________________________________________________________ Concordia University, Nebraska See http://www.cune.edu/ for the latest news and events!
It's working OK here. We're actually using 2.2.1RC2 with a TE110P in a VZ environment.
Russell, Appreciate you letting me know this. I had some trouble getting 2.1.0 working with my TDM410P, not sure how oz handles the difference between these two cards but I am going to try again. I was getting all sorts of intermittent behavior of calls working/not working? CID working, then not working... That was on CentOS 5.4 though before you guys informed me of the issues, so it likely had nothing to do with dahdi then. I plan to give this another go now with my 5.3 setup. Thanks a lot! jlc
"Joseph L. Casale" <jcasale@activenetwerx.com> said:
On that note, what OS are you on?
Debian 5.0.3 -- Russell Mosemann ________________________________________________________ Concordia University, Nebraska See http://www.cune.edu/ for the latest news and events!
Debian 5.0.3
Well, given the time I had tonight, I tried on my CentOS 5.3 box. The incoming log is the first block, and an outgoing log is the second block at http://pastebin.freeswitch.org/11965 When I call in, I can hear it get answered, as I play the wav file I hear the tone go very low, but no sound. When I try to call out, nothing happens? Is there anything in the log that might standout from your perspective? Thanks everyone! jlc
Are you really dialing that phone number or is that just redacted? Try dialing 919-386-9900 for testing. -MC On Wed, Jan 27, 2010 at 6:09 PM, Joseph L. Casale <jcasale@activenetwerx.com
wrote:
Debian 5.0.3
Well, given the time I had tonight, I tried on my CentOS 5.3 box. The incoming log is the first block, and an outgoing log is the second block at http://pastebin.freeswitch.org/11965
When I call in, I can hear it get answered, as I play the wav file I hear the tone go very low, but no sound.
When I try to call out, nothing happens?
Is there anything in the log that might standout from your perspective?
Thanks everyone! jlc
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Are you really dialing that phone number or is that just redacted? Try dialing 919-386-9900 for testing.
Hi Michael, It was redacted. I can get back in at night to continue testing, but given incoming doesn't work I doubt I will have any luck. The dialplan to bypass the sip provider requires a 9, then the 10 digit #. On the incoming call, I see the two errors: [ERR] zap_io.c:1599 I/O backend does not support command 2[4|5]! Any idea what that pertains to? From there on, everything looks positive as it find the dialplan and plays the wave, I just can't hear anything at all. Even though this card doesn't have a hw ec, w/ mg2 or hpec the quality was flawless. I'd love to have it running again. For the record, using the 4630 rev of zaptel as per http://wiki.freeswitch.org/wiki/Zaptel_Tutorial I was able to get some success, but it was very intermittent. Thanks for any insight, jlc
participants (4)
-
Joseph L. Casale
-
Michael Collins
-
Moises Silva
-
Russell.Mosemann＠cune.org