Hi All I am using Freeswitch 1.0.6 with Vitelity as inbound/outbound provider. My Inbound calls route properly to extension 1000, however, the caller does not hear the extension ringing. The extension at 1000 does ring however and once I pick up the call, the conversation proceeds normally. I just can't figure out why the caller hears silence during phone ringing. I have tried putting instant_ringback in dialplan/public.xml: <extension name="vitel-inbound"> <condition field="destination_number" expression=""> <action application="set" data="instant_ringback=true"/> <action application="transfer" data="1000 XML default"/> </condition> </extension> The log lines during inbound calls show: 2010-06-02 07:55:15.913827 [NOTICE] mod_sofia.c:1992 Pre-Answer sofia/external/7816409134@64.2.142.15! 2010-06-02 07:55:15.916855 [DEBUG] switch_core_session.c:703 Send signal sofia/internal/sip:1000@172.168.128.193:5060 [BREAK] 2010-06-02 07:55:15.916855 [DEBUG] sofia.c:4167 Channel sofia/external/ 2123135987@64.2.142.15 skipping state [early][183] 2010-06-02 07:55:15.916855 [DEBUG] switch_core_session.c:642 Send signal sofia/external/2123135987@64.2.142.15 [BREAK] 2010-06-02 07:55:15.916855 [DEBUG] switch_ivr_originate.c:1124 Raw Codec Activation Success L16@8000hz 1 channel 20ms 2010-06-02 07:55:15.916855 [DEBUG] switch_core_codec.c:122 sofia/external/ 2123135987@64.2.142.15 Push codec L16:10 2010-06-02 07:55:15.916855 [DEBUG] switch_ivr_originate.c:1189 Play Ringback Tone [%(2000,4000,440.0,480.0)] 2010-06-02 07:55:15.922793 [DEBUG] sofia.c:4172 Channel sofia/internal/ sip:1000@172.168.128.193:5060 entering state [calling][0] 2010-06-02 07:55:15.981765 [DEBUG] sofia.c:5866 IP 64.2.142.15 Rejected by acl "domains". Falling back to Digest auth. 2010-06-02 07:55:15.984797 [WARNING] sofia_reg.c:1873 Can't find user [ prav_24.90.81.72@172.168.128.203] You must define a domain called '172.168.128.203' in your directory and add a user with the id="prav_24.90.81.72" attribute and you must configure your device to use the proper domain in it's authentication credentials. 2010-06-02 07:55:15.984797 [WARNING] sofia_reg.c:1033 SIP auth failure (INVITE) on sofia profile 'internal' for [5087203445@24.90.81.72] from ip 64.2.142.15 where 5087203445 is my inbound DID. Can someone please help decipher what the warning means and why there might not be any early media ringback.. thanks -Praveen
Try setting the ringback variable to something you wish to use as ringback tone. /b On Jun 2, 2010, at 7:11 AM, Praveen Ray wrote:
I am using Freeswitch 1.0.6 with Vitelity as inbound/outbound provider. My Inbound calls route properly to extension 1000, however, the caller does not hear the extension ringing. The extension at 1000 does ring however and once I pick up the call, the conversation proceeds normally. I just can't figure out why the caller hears silence during phone ringing. I have tried putting instant_ringback in dialplan/public.xml:
On 6/2/2010 8:11 AM, Praveen Ray wrote:
Hi All I am using Freeswitch 1.0.6 with Vitelity as inbound/outbound provider. My Inbound calls route properly to extension 1000, however, the caller does not hear the extension ringing. The extension at 1000 does ring however and once I pick up the call, the conversation proceeds normally. I just can't figure out why the caller hears silence during phone ringing. I have tried putting instant_ringback in dialplan/public.xml:
I get this from a couple VOIP providers. My main number goes straight to a IVR so it's a little strange for some callers, but for the others ring_ready seems to help. If you immediately start doing stuff, like an IVR, it won't help unless you put in a delay(so the ringing can happen) before you answer. But the way I see it, once you've got the call, do something with it! If the inbound call just rings until someone answers, this should do it: <action application="ring_ready" /> -- Andrew Thompson
But in his case usage of instant_ringback would require the ringback variable to produce the ringing... the other issue is if you send a 180 some endpoints and devices might not generate local ringback. :P Welcome to SIP the land of the SHOULD and MAY words. /b On Jun 2, 2010, at 10:17 AM, Andrew Thompson wrote:
<action application="ring_ready" />
Thanks Andrew Could you please point me to the right place (xml file) where <action application="ring_ready" /> should be placed? -P On Wed, Jun 2, 2010 at 11:17 AM, Andrew Thompson <andrewkt@aktzero.com>wrote:
On 6/2/2010 8:11 AM, Praveen Ray wrote:
Hi All I am using Freeswitch 1.0.6 with Vitelity as inbound/outbound provider. My Inbound calls route properly to extension 1000, however, the caller does not hear the extension ringing. The extension at 1000 does ring however and once I pick up the call, the conversation proceeds normally. I just can't figure out why the caller hears silence during phone ringing. I have tried putting instant_ringback in dialplan/public.xml:
I get this from a couple VOIP providers. My main number goes straight to a IVR so it's a little strange for some callers, but for the others ring_ready seems to help. If you immediately start doing stuff, like an IVR, it won't help unless you put in a delay(so the ringing can happen) before you answer. But the way I see it, once you've got the call, do something with it! If the inbound call just rings until someone answers, this should do it:
<action application="ring_ready" />
-- Andrew Thompson
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
in a dialplan ----- Original Message ----- From: Praveen Ray To: freeswitch-users@lists.freeswitch.org Sent: Wednesday, June 02, 2010 5:29 PM Subject: Re: [Freeswitch-users] No Early Media Ringback Thanks Andrew Could you please point me to the right place (xml file) where <action application="ring_ready" /> should be placed? -P On Wed, Jun 2, 2010 at 11:17 AM, Andrew Thompson <andrewkt@aktzero.com> wrote: On 6/2/2010 8:11 AM, Praveen Ray wrote: > Hi All > I am using Freeswitch 1.0.6 with Vitelity as inbound/outbound > provider. My Inbound calls route properly to extension 1000, however, > the caller does not hear the extension ringing. The extension at 1000 > does ring however and once I pick up the call, the conversation > proceeds normally. I just can't figure out why the caller hears > silence during phone ringing. I have tried putting instant_ringback in > dialplan/public.xml: I get this from a couple VOIP providers. My main number goes straight to a IVR so it's a little strange for some callers, but for the others ring_ready seems to help. If you immediately start doing stuff, like an IVR, it won't help unless you put in a delay(so the ringing can happen) before you answer. But the way I see it, once you've got the call, do something with it! If the inbound call just rings until someone answers, this should do it: <action application="ring_ready" /> -- Andrew Thompson _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ------------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Andrew Thompson
-
Brian West
-
Madovsky
-
Praveen Ray