Hi All, I'm struggling with multiple Diversion headers. In our case we have an incoming call with multiple diversion headers, we do some processing and want to add a diversion header ourselves to the outgoing call. What I've found so far is that for inbound calls one needs to set the profile param parse-all-invite-headers=true, this results in a sip_i_Diversion variable that uses the ARRAY:: syntax and has all the values I want. So far so good. Example: ARRAY::<sip:Carol@uas2.isp.com>;privacy=off;reason=unconditional;counter=2;screen=no|:<sip:Bert@uas2.isp.com>;privacy="full";reason=user-busy;counter=3;screen=no|:<sip:Bob@uas1.isp.com>;reason=do-not-disturb;counter=1 For the outbound call it's more difficult, I cannot get FreeSwitch to produce multiple Diversion headers. The only syntax I've found is using comma's in the value, like this: <action application="export" data="sip_h_Diversion=<sip:Carol@uas2.isp.com>;privacy=off;reason=unconditional;counter=2;screen=no,<sip:Bert@uas2.isp.com>;privacy="full";reason=user-busy;counter=3;screen=no,<sip:Bob@uas1.isp.com>;reason=do-not-disturb;counter=1,<sip:Bert@uas2.isp.com>;reason=user-busy"/> This results in a single diversion header with the contents I put in. From the RFC's I understand that this is technically equivalent to 4 (in my case) Diversion headers, is this true? Is there a way I can convince FS to generate multiple separate diversion headers? Best regards, Sjoerd. BTW I've tested with FS 1.6.20 and 1.4.26