Hello Debian lenny with svn15321 freeswitch@internal> load mod_portaudio -ERR [module load file routine returned an error] 2009-11-03 11:56:47.047969 [ERR] mod_portaudio.c:964 Cannot find an input devicefreeswitch@internal> 2009-11-03 11:56:47.047969 [ERR] mod_portaudio.c:974 Cannot find an input device 2009-11-03 11:56:47.047969 [CRIT] switch_loadable_module.c:871 Error Loading module /opt/freeswitch/mod/mod_portaudio.so **Module load routine returned an error** <configuration name="portaudio.conf" description="Soundcard Endpoint"> <settings> <!-- indev, outdev, ringdev: partial case sensitive string match on something in the name or the device number prefixed with # eg "#1" (or blank for default) --> <!-- device to use for input --> <param name="indev" value="1"/> <!-- device to use for output --> <param name="outdev" value="1"/> <!--device to use for inbound ring --> <param name="ringdev" value="1"/> <!--File to play as the ring sound --> <!--<param name="ring-file" value="/sounds/ring.wav"/>--> <!--Number of seconds to pause between rings --> <!--<param name="ring-interval" value="5"/>--> <!--Enable or Disable dual_streams--> <!--<param name="dual-streams" value="true"/>--> <!--file to play when calls are on hold--> <param name="hold-file" value="$${hold_music}"/> <!--Timer to use for hold music (i'd leave this one commented)--> <!--<param name="timer-name" value="soft"/>--> <!--Default dialplan and caller-id info --> <param name="dialplan" value="XML"/> <param name="cid-name" value="$${outbound_caller_name}"/> <param name="cid-num" value="$${outbound_caller_id}"/> <!--audio sample rate and interval --> <param name="sample-rate" value="48000"/> <param name="codec-ms" value="10"/> </settings> </configuration> Any help would be appreciated. --FC