UP 0 years, 7 days, 10 hours, 7 minutes, 58 seconds, 481 milliseconds, 883 microseconds FreeSWITCH is ready 1009971 session(s) since startup 376 session(s) 4/60 1000 session(s) max min idle cpu 0.00/69.00 This is running on a XenServer 6 Virtual Machine using CentOS 6.2 It uses 2 cores: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz and 4GB of RAM. Using: FreeSWITCH Version 1.0.head (git-d827cfe 2012-03-04 17-48-30 -0600) I run freeswitch in -hp mode. I use track-calls in the SIP profile to store calls for HA support and mysql master-slave replication to transfer the database to the standby freeswitch virtual machine (different physical hardware). I use heartbeat and mon for network and service monitoring. If the network or a service drops it fails over to the standby freeswitch virtual machine without dropping the calls. Great product. Quality and Stability is rock solid. Thanks Anthony, Brian and everyone I forgot. This userlist is great and assisted me in troubleshooting many issues and for getting this beast up and running. Colin
Hey Colin, Could you document your setup on the wiki maybe? K On 5/14/12 3:12 PM, "Colin Mason" <cmason@frontiernetworks.ca> wrote:
UP 0 years, 7 days, 10 hours, 7 minutes, 58 seconds, 481 milliseconds, 883 microseconds FreeSWITCH is ready 1009971 session(s) since startup 376 session(s) 4/60 1000 session(s) max min idle cpu 0.00/69.00
This is running on a XenServer 6 Virtual Machine using CentOS 6.2 It uses 2 cores: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz and 4GB of RAM.
Using: FreeSWITCH Version 1.0.head (git-d827cfe 2012-03-04 17-48-30 -0600)
I run freeswitch in hp mode. I use track-calls in the SIP profile to store calls for HA support and mysql master-slave replication to transfer the database to the standby freeswitch virtual machine (different physical hardware). I use heartbeat and mon for network and service monitoring. If the network or a service drops it fails over to the standby freeswitch virtual machine without dropping the calls.
Great product. Quality and Stability is rock solid. Thanks Anthony, Brian and everyone I forgot.
This userlist is great and assisted me in troubleshooting many issues and for getting this beast up and running.
Colin
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
One .... Meeelyun .... phone calls. On Mon, May 14, 2012 at 3:32 PM, Ken Rice <krice@freeswitch.org> wrote:
Hey Colin,
Could you document your setup on the wiki maybe?
K
On 5/14/12 3:12 PM, "Colin Mason" <cmason@frontiernetworks.ca> wrote:
UP 0 years, 7 days, 10 hours, 7 minutes, 58 seconds, 481 milliseconds, 883 microseconds FreeSWITCH is ready 1009971 session(s) since startup 376 session(s) 4/60 1000 session(s) max min idle cpu 0.00/69.00
This is running on a XenServer 6 Virtual Machine using CentOS 6.2 It uses 2 cores: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz and 4GB of RAM.
Using: FreeSWITCH Version 1.0.head (git-d827cfe 2012-03-04 17-48-30 -0600)
I run freeswitch in –hp mode. I use track-calls in the SIP profile to store calls for HA support and mysql master-slave replication to transfer the database to the standby freeswitch virtual machine (different physical hardware). I use heartbeat and mon for network and service monitoring. If the network or a service drops it fails over to the standby freeswitch virtual machine without dropping the calls.
Great product. Quality and Stability is rock solid. Thanks Anthony, Brian and everyone I forgot.
This userlist is great and assisted me in troubleshooting many issues and for getting this beast up and running.
Colin
________________________________ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
Seconded. The more documented ways of doing HA the better. Cheers Alex On 14/05/12 21:32, Ken Rice wrote:
Hey Colin,
Could you document your setup on the wiki maybe?
K
On 5/14/12 3:12 PM, "Colin Mason" <cmason@frontiernetworks.ca> wrote:
UP 0 years, 7 days, 10 hours, 7 minutes, 58 seconds, 481 milliseconds, 883 microseconds FreeSWITCH is ready 1009971 session(s) since startup 376 session(s) 4/60 1000 session(s) max min idle cpu 0.00/69.00
This is running on a XenServer 6 Virtual Machine using CentOS 6.2 It uses 2 cores: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz and 4GB of RAM.
Using: FreeSWITCH Version 1.0.head (git-d827cfe 2012-03-04 17-48-30 -0600)
I run freeswitch in --hp mode. I use track-calls in the SIP profile to store calls for HA support and mysql master-slave replication to transfer the database to the standby freeswitch virtual machine (different physical hardware). I use heartbeat and mon for network and service monitoring. If the network or a service drops it fails over to the standby freeswitch virtual machine without dropping the calls.
Great product. Quality and Stability is rock solid. Thanks Anthony, Brian and everyone I forgot.
This userlist is great and assisted me in troubleshooting many issues and for getting this beast up and running.
Colin
------------------------------------------------------------------------ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- This message has been scanned for viruses and dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is believed to be clean.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- This message is intended only for the addressee and may contain confidential information. Unless you are that person, you may not disclose its contents or use it in any way and are requested to delete the message along with any attachments and notify us immediately. "Transact" is operated by Integrated Financial Arrangements plc Domain House, 5-7 Singer Street, London EC2A 4BQ Tel: (020) 7608 4900 Fax: (020) 7608 5300 (Registered office: as above; Registered in England and Wales under number: 3727592) Authorised and regulated by the Financial Services Authority (entered on the FSA Register; number: 190856)
On Mon, May 14, 2012 at 1:32 PM, Ken Rice <krice@freeswitch.org> wrote:
Hey Colin,
Could you document your setup on the wiki maybe?
K
Also, if you want to come join the Wednesday conference call and give us the lowdown on how you pulled this off we'd love to hear about it. You've got much more than just FreeSWITCH in your environment. Putting all those pieces together was probably a lot of "fun". :) -MC
WOW, I'm pretty sure there are other FS deployments giving quality performances, but just 7 days... !! It will be great if this kind of setup-guide is documented for the benefit for all of us here. Regards, Sammy On Tue, May 15, 2012 at 1:42 AM, Michael Collins <msc@freeswitch.org> wrote:
On Mon, May 14, 2012 at 1:32 PM, Ken Rice <krice@freeswitch.org> wrote:
Hey Colin,
Could you document your setup on the wiki maybe?
K
Also, if you want to come join the Wednesday conference call and give us the lowdown on how you pulled this off we'd love to hear about it. You've got much more than just FreeSWITCH in your environment. Putting all those pieces together was probably a lot of "fun". :)
-MC
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Here are stats from my production box. It been runing over a year now, without any maintenance. :-) UP 1 year, 68 days, 11 hours, 58 minutes, 31 seconds, 333 milliseconds, 996 microseconds 11131103 session(s) since startup 496 session(s) 0/30 1000 session(s) max min idle cpu 0.00/100.00 Yes! FreeSWITCH is damn stable. Thank you. On Tue, May 15, 2012 at 7:32 AM, SamyGo <govoiper@gmail.com> wrote:
WOW, I'm pretty sure there are other FS deployments giving quality performances, but just 7 days... !! It will be great if this kind of setup-guide is documented for the benefit for all of us here. Regards, Sammy
On Tue, May 15, 2012 at 1:42 AM, Michael Collins <msc@freeswitch.org>wrote:
On Mon, May 14, 2012 at 1:32 PM, Ken Rice <krice@freeswitch.org> wrote:
Hey Colin,
Could you document your setup on the wiki maybe?
K
Also, if you want to come join the Wednesday conference call and give us the lowdown on how you pulled this off we'd love to hear about it. You've got much more than just FreeSWITCH in your environment. Putting all those pieces together was probably a lot of "fun". :)
-MC
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Muhammad Shahzad ----------------------------------- CISCO Rich Media Communication Specialist (CRMCS) CISCO Certified Network Associate (CCNA) Cell: +92 334 422 40 88 MSN: shari_786pk@hotmail.com Email: shaheryarkh@googlemail.com
Hi all We are using Freeswitch as voicemail with a IP based call server & I do not remember a single instance when Freeswitch was crashed. Yes, 1-2 times, server hardware was down but that was due to some power or some other hardware issue. But as far as freeswitch is concerned, not even a single failure... ....rock stable. regards sharad ----- Original Message ----- From: Muhammad Shahzad To: FreeSWITCH Users Help Sent: Tuesday, May 15, 2012 12:49 PM Subject: Re: [Freeswitch-users] Thanks FreeSWITCH Here are stats from my production box. It been runing over a year now, without any maintenance. :-) UP 1 year, 68 days, 11 hours, 58 minutes, 31 seconds, 333 milliseconds, 996 microseconds 11131103 session(s) since startup 496 session(s) 0/30 1000 session(s) max min idle cpu 0.00/100.00 Yes! FreeSWITCH is damn stable. Thank you. On Tue, May 15, 2012 at 7:32 AM, SamyGo <govoiper@gmail.com> wrote: WOW, I'm pretty sure there are other FS deployments giving quality performances, but just 7 days... !! It will be great if this kind of setup-guide is documented for the benefit for all of us here. Regards, Sammy On Tue, May 15, 2012 at 1:42 AM, Michael Collins <msc@freeswitch.org> wrote: On Mon, May 14, 2012 at 1:32 PM, Ken Rice <krice@freeswitch.org> wrote: Hey Colin, Could you document your setup on the wiki maybe? K Also, if you want to come join the Wednesday conference call and give us the lowdown on how you pulled this off we'd love to hear about it. You've got much more than just FreeSWITCH in your environment. Putting all those pieces together was probably a lot of "fun". :) -MC _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Muhammad Shahzad ----------------------------------- CISCO Rich Media Communication Specialist (CRMCS) CISCO Certified Network Associate (CCNA) Cell: +92 334 422 40 88 MSN: shari_786pk@hotmail.com Email: shaheryarkh@googlemail.com
That's central office-grade. Bote From: Muhammad Shahzad Sent: Tuesday, 15 May, 2012 03:20 Here are stats from my production box. It been runing over a year now, without any maintenance. :-) UP 1 year, 68 days, 11 hours, 58 minutes, 31 seconds, 333 milliseconds, 996 microseconds 11131103 session(s) since startup 496 session(s) 0/30 1000 session(s) max min idle cpu 0.00/100.00 Yes! FreeSWITCH is damn stable. Thank you.
@Colin Mason: Very impressive setup and in seven days more than a million calls. Mind blowing! Hats off to FS developers and your achievement. I also second others in the list that you need to document it for the benefits of the community because it is more than FS! /z --- Support http://thehumanape.com On 5/15/12, SamyGo <govoiper@gmail.com> wrote:
WOW, I'm pretty sure there are other FS deployments giving quality performances, but just 7 days... !! It will be great if this kind of setup-guide is documented for the benefit for all of us here. Regards, Sammy
On Tue, May 15, 2012 at 1:42 AM, Michael Collins <msc@freeswitch.org> wrote:
On Mon, May 14, 2012 at 1:32 PM, Ken Rice <krice@freeswitch.org> wrote:
Hey Colin,
Could you document your setup on the wiki maybe?
K
Also, if you want to come join the Wednesday conference call and give us the lowdown on how you pulled this off we'd love to hear about it. You've got much more than just FreeSWITCH in your environment. Putting all those pieces together was probably a lot of "fun". :)
-MC
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Sure! Give me a week or so and I will document my setup. My next test will be a baremetal freeswitch setup. I will compare the performance between baremetal and virtual machine. Colin From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of SamyGo Sent: Tuesday, May 15, 2012 1:33 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Thanks FreeSWITCH WOW, I'm pretty sure there are other FS deployments giving quality performances, but just 7 days... !! It will be great if this kind of setup-guide is documented for the benefit for all of us here. Regards, Sammy On Tue, May 15, 2012 at 1:42 AM, Michael Collins <msc@freeswitch.org<mailto:msc@freeswitch.org>> wrote: On Mon, May 14, 2012 at 1:32 PM, Ken Rice <krice@freeswitch.org<mailto:krice@freeswitch.org>> wrote: Hey Colin, Could you document your setup on the wiki maybe? K Also, if you want to come join the Wednesday conference call and give us the lowdown on how you pulled this off we'd love to hear about it. You've got much more than just FreeSWITCH in your environment. Putting all those pieces together was probably a lot of "fun". :) -MC _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
With all the attention this thread is getting, I can't resist the chance to remind you about ClueCon in August! My last 2 talks were about tuning FS for performance, I might switch it up this year. On Tue, May 15, 2012 at 9:30 AM, Colin Mason <cmason@frontiernetworks.ca> wrote:
Sure! Give me a week or so and I will document my setup. My next test will be a baremetal freeswitch setup. I will compare the performance between baremetal and virtual machine.
Colin
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of SamyGo Sent: Tuesday, May 15, 2012 1:33 AM To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Thanks FreeSWITCH
WOW,
I'm pretty sure there are other FS deployments giving quality performances, but just 7 days... !!
It will be great if this kind of setup-guide is documented for the benefit for all of us here. Regards,
Sammy
On Tue, May 15, 2012 at 1:42 AM, Michael Collins <msc@freeswitch.org> wrote:
On Mon, May 14, 2012 at 1:32 PM, Ken Rice <krice@freeswitch.org> wrote:
Hey Colin,
Could you document your setup on the wiki maybe?
K
Also, if you want to come join the Wednesday conference call and give us the lowdown on how you pulled this off we'd love to hear about it. You've got much more than just FreeSWITCH in your environment. Putting all those pieces together was probably a lot of "fun". :)
-MC
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
On Tue, May 15, 2012 at 9:04 AM, Anthony Minessale <anthony.minessale@gmail.com> wrote:
With all the attention this thread is getting, I can't resist the chance to remind you about ClueCon in August! My last 2 talks were about tuning FS for performance, I might switch it up this year.
Link for the lazy :) http://www.cluecon.com/ I hope to see you all there! Gabe
Why shouldn't you? You are one of the creators of this little monster we all love anyway… -- João Mesquita Sent with Sparrow (http://www.sparrowmailapp.com/?sig) On Tuesday, May 15, 2012 at 12:04 PM, Anthony Minessale wrote:
With all the attention this thread is getting, I can't resist the chance to remind you about ClueCon in August! My last 2 talks were about tuning FS for performance, I might switch it up this year.
On Tue, May 15, 2012 at 9:30 AM, Colin Mason <cmason@frontiernetworks.ca (mailto:cmason@frontiernetworks.ca)> wrote:
Sure! Give me a week or so and I will document my setup. My next test will be a baremetal freeswitch setup. I will compare the performance between baremetal and virtual machine.
Colin
From: freeswitch-users-bounces@lists.freeswitch.org (mailto:freeswitch-users-bounces@lists.freeswitch.org) [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of SamyGo Sent: Tuesday, May 15, 2012 1:33 AM To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Thanks FreeSWITCH
WOW,
I'm pretty sure there are other FS deployments giving quality performances, but just 7 days... !!
It will be great if this kind of setup-guide is documented for the benefit for all of us here. Regards,
Sammy
On Tue, May 15, 2012 at 1:42 AM, Michael Collins <msc@freeswitch.org (mailto:msc@freeswitch.org)> wrote:
On Mon, May 14, 2012 at 1:32 PM, Ken Rice <krice@freeswitch.org (mailto:krice@freeswitch.org)> wrote:
Hey Colin,
Could you document your setup on the wiki maybe?
K
Also, if you want to come join the Wednesday conference call and give us the lowdown on how you pulled this off we'd love to hear about it. You've got much more than just FreeSWITCH in your environment. Putting all those pieces together was probably a lot of "fun". :)
-MC
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org (mailto:FreeSWITCH-users@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org (mailto:FreeSWITCH-users@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com (mailto:anthony_minessale@hotmail.com) GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com (mailto:anthony.minessale@gmail.com) IRC: irc.freenode.net (http://irc.freenode.net) #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org (mailto:888@conference.freeswitch.org) googletalk:conf+888@conference.freeswitch.org (mailto:conf+888@conference.freeswitch.org) pstn:+19193869900
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org (mailto:FreeSWITCH-users@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Nice, agree with you there, great product across many different platforms. We run FreeSWITCH on Windows 2008 Standard with SQL Server 2008, in a load balanced fashion across two physical machines, using C# ESL based ivr applications. Although our stats arent based on one machine, they arent too bad either, the limiting factor for us is not enough customers :-) Node One:UP 0 years, 35 days, 5 hours, 2 minutes, 29 seconds, 798 milliseconds, 961 microseconds3036283 session(s) since startupmin idle cpu 0.00/86.72 Node Two:UP 0 years, 35 days, 5 hours, 7 minutes, 20 seconds, 676 milliseconds, 891 microseconds3025205 session(s) since startupmin idle cpu 0.00/97.66 Total of 6,061,488 calls in 35 days. We have more problems with our SIP trunk suppliers than we do with FreeSWITCH :-) BobFrom: cmason@frontiernetworks.ca To: freeswitch-users@lists.freeswitch.org Date: Mon, 14 May 2012 16:12:24 -0400 Subject: [Freeswitch-users] Thanks FreeSWITCH UP 0 years, 7 days, 10 hours, 7 minutes, 58 seconds, 481 milliseconds, 883 microsecondsFreeSWITCH is ready1009971 session(s) since startup376 session(s) 4/601000 session(s) maxmin idle cpu 0.00/69.00 This is running on a XenServer 6 Virtual Machine using CentOS 6.2It uses 2 cores: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz and 4GB of RAM. Using: FreeSWITCH Version 1.0.head (git-d827cfe 2012-03-04 17-48-30 -0600) I run freeswitch in –hp mode. I use track-calls in the SIP profile to store calls for HA support and mysql master-slave replication to transfer the database to the standby freeswitch virtual machine (different physical hardware). I use heartbeat and mon for network and service monitoring. If the network or a service drops it fails over to the standby freeswitch virtual machine without dropping the calls. Great product. Quality and Stability is rock solid. Thanks Anthony, Brian and everyone I forgot. This userlist is great and assisted me in troubleshooting many issues and for getting this beast up and running. Colin _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
It amazing, Such a great performance of FreeSWITCH. It is really awesome. If it is documented, we all can achieve the same. Thanks ----- Original Message ----- From: "Colin Mason" <cmason@frontiernetworks.ca> To: freeswitch-users@lists.freeswitch.org Sent: Tuesday, May 15, 2012 1:42:24 AM Subject: [Freeswitch-users] Thanks FreeSWITCH UP 0 years, 7 days, 10 hours, 7 minutes, 58 seconds, 481 milliseconds, 883 microseconds FreeSWITCH is ready 1009971 session(s) since startup 376 session(s) 4/60 1000 session(s) max min idle cpu 0.00/69.00 This is running on a XenServer 6 Virtual Machine using CentOS 6.2 It uses 2 cores: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz and 4GB of RAM. Using: FreeSWITCH Version 1.0.head (git-d827cfe 2012-03-04 17-48-30 -0600) I run freeswitch in –hp mode. I use track-calls in the SIP profile to store calls for HA support and mysql master-slave replication to transfer the database to the standby freeswitch virtual machine (different physical hardware). I use heartbeat and mon for network and service monitoring. If the network or a service drops it fails over to the standby freeswitch virtual machine without dropping the calls. Great product. Quality and Stability is rock solid. Thanks Anthony, Brian and everyone I forgot. This userlist is great and assisted me in troubleshooting many issues and for getting this beast up and running. Colin
I think for the sake of the project, and make it evolve even more, such configurations should be documented and possibly should be made public on wiki. This will help other users compare and possibly one can also enhance their existing setup too. -B On Tue, May 15, 2012 at 10:27 AM, Piyush Sharma <piyush.sharma@coraltele.com> wrote:
It amazing, Such a great performance of FreeSWITCH. It is really awesome. If it is documented, we all can achieve the same. Thanks
________________________________ From: "Colin Mason" <cmason@frontiernetworks.ca> To: freeswitch-users@lists.freeswitch.org Sent: Tuesday, May 15, 2012 1:42:24 AM Subject: [Freeswitch-users] Thanks FreeSWITCH
UP 0 years, 7 days, 10 hours, 7 minutes, 58 seconds, 481 milliseconds, 883 microseconds
FreeSWITCH is ready
1009971 session(s) since startup
376 session(s) 4/60
1000 session(s) max
min idle cpu 0.00/69.00
This is running on a XenServer 6 Virtual Machine using CentOS 6.2
It uses 2 cores: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz and 4GB of RAM.
Using: FreeSWITCH Version 1.0.head (git-d827cfe 2012-03-04 17-48-30 -0600)
I run freeswitch in –hp mode. I use track-calls in the SIP profile to store calls for HA support and mysql master-slave replication to transfer the database to the standby freeswitch virtual machine (different physical hardware). I use heartbeat and mon for network and service monitoring. If the network or a service drops it fails over to the standby freeswitch virtual machine without dropping the calls.
Great product. Quality and Stability is rock solid. Thanks Anthony, Brian and everyone I forgot.
This userlist is great and assisted me in troubleshooting many issues and for getting this beast up and running.
Colin
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Impressive! I would be interested how did you setup the connection from FreeSWITCH to MySQL. We had to give up HA for now, because of the MySQL ODBC driver stability issues. Hynek On Mon, May 14, 2012 at 10:12 PM, Colin Mason <cmason@frontiernetworks.ca>wrote:
UP 0 years, 7 days, 10 hours, 7 minutes, 58 seconds, 481 milliseconds, 883 microseconds****
FreeSWITCH is ready****
1009971 session(s) since startup****
376 session(s) 4/60****
1000 session(s) max****
min idle cpu 0.00/69.00****
** **
This is running on a XenServer 6 Virtual Machine using CentOS 6.2****
It uses 2 cores: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz and 4GB of RAM.****
** **
Using: FreeSWITCH Version 1.0.head (git-d827cfe 2012-03-04 17-48-30 -0600) ****
** **
I run freeswitch in –hp mode. I use track-calls in the SIP profile to store calls for HA support and mysql master-slave replication to transfer the database to the standby freeswitch virtual machine (different physical hardware). I use heartbeat and mon for network and service monitoring. If the network or a service drops it fails over to the standby freeswitch virtual machine without dropping the calls.****
** **
Great product. Quality and Stability is rock solid. Thanks Anthony, Brian and everyone I forgot.****
** **
This userlist is great and assisted me in troubleshooting many issues and for getting this beast up and running.****
** **
Colin****
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi, in my setup the unixODBC 2.3.1 and mysql odbc connector 5.1.9 is stable Benjamin Von: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] Im Auftrag von Hynek Cihlar Gesendet: Dienstag, 15. Mai 2012 10:37 An: FreeSWITCH Users Help Betreff: Re: [Freeswitch-users] Thanks FreeSWITCH Impressive! I would be interested how did you setup the connection from FreeSWITCH to MySQL. We had to give up HA for now, because of the MySQL ODBC driver stability issues. Hynek On Mon, May 14, 2012 at 10:12 PM, Colin Mason <cmason@frontiernetworks.ca<mailto:cmason@frontiernetworks.ca>> wrote: UP 0 years, 7 days, 10 hours, 7 minutes, 58 seconds, 481 milliseconds, 883 microseconds FreeSWITCH is ready 1009971 session(s) since startup 376 session(s) 4/60 1000 session(s) max min idle cpu 0.00/69.00 This is running on a XenServer 6 Virtual Machine using CentOS 6.2 It uses 2 cores: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz and 4GB of RAM. Using: FreeSWITCH Version 1.0.head (git-d827cfe 2012-03-04 17-48-30 -0600) I run freeswitch in -hp mode. I use track-calls in the SIP profile to store calls for HA support and mysql master-slave replication to transfer the database to the standby freeswitch virtual machine (different physical hardware). I use heartbeat and mon for network and service monitoring. If the network or a service drops it fails over to the standby freeswitch virtual machine without dropping the calls. Great product. Quality and Stability is rock solid. Thanks Anthony, Brian and everyone I forgot. This userlist is great and assisted me in troubleshooting many issues and for getting this beast up and running. Colin _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (17)
-
Alex Crow
-
Anthony Minessale
-
B.Tietz＠pinguin.ag
-
Bob Coleman
-
Bote Man
-
Colin Mason
-
Gabriel Gunderson
-
Hynek Cihlar
-
João Mesquita
-
Ken Rice
-
Michael Collins
-
Muhammad Naseer Bhatti
-
Muhammad Shahzad
-
Piyush Sharma
-
SamyGo
-
Sharad Garg
-
Zenny