Hello, The purpose was to evaluate FreeSwitch and decide whether to replace my Asterisks with it or not. I installed FS1.0.6 from git on Ubuntu Server 10.04.3 LTS. Everything went smoothly until FS did not start with the system today. There are no errors in logs. FS starts in console fine. FS does not start in background mode nor from console (with -nc option) nor from init script. Even worse: FS can unexpectedly start (rarely) or do not start (often) with "backgrounding" message. Have a look at the console output below, please.
root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start # ******* FS started without a message ********* root@fs:/usr/local/freeswitch/bin# netstat -ant Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 172.18.0.130:5060 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:8021 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 172.18.0.130:5080 0.0.0.0:* LISTEN tcp6 0 0 ::1:5060 :::* LISTEN tcp6 0 0 :::22 :::* LISTEN root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch stop Killing: 850 root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start root@fs:/usr/local/freeswitch/bin# 923 Backgrounding. # ****** Note message above ********* root@fs:/usr/local/freeswitch/bin# netstat -ant Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp6 0 0 :::22 :::* LISTEN
Your opinions, please? Thank you in advance, Eugene ========================================================= Данное сообщение и любые вложения («Сообщение») являются конфиденциальными, предназначенными исключительно для адресатов, и могут содержать сведения, охраняемые в соответствии с законодательством. Любое несанкционированное использование или распространение Сообщения запрещено. Электронная почта не гарантирует подлинности Сообщений. Ни ЗАО "АКБ "БЕЛРОСБАНК", ни любые его подразделения или дочерние организации не несут ответственности за Сообщение в случае его подмены, изменения либо фальсификации. ========================================================= This message and any attachments (the “message”) are confidential, intended solely for the addressees, and may contain legally privileged information. Any unauthorized use or dissemination is prohibited. E-mails are susceptible to alteration. Neither JSC “BELROSBANK” nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified. =========================================================
The first suggestion would be to use latest git and init script from http://wiki.freeswitch.org/wiki/Freeswitch_init. 10 февраля 2012 г. 15:53 пользователь Eugene Shcherbatyuk < shcherbatyuk@belrosbank.by> написал:
Hello,
The purpose was to evaluate FreeSwitch and decide whether to replace my Asterisks with it or not. I installed FS1.0.6 from git on Ubuntu Server 10.04.3 LTS. Everything went smoothly until FS did not start with the system today.
There are no errors in logs. FS starts in console fine. FS does not start in background mode nor from console (with -nc option) nor from init script. Even worse: FS can unexpectedly start (rarely) or do not start (often) with "backgrounding" message. Have a look at the console output below, please.
root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start # ******* FS started without a message ********* root@fs:/usr/local/freeswitch/bin# netstat -ant Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 172.18.0.130:5060 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:8021 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 172.18.0.130:5080 0.0.0.0:* LISTEN tcp6 0 0 ::1:5060 :::* LISTEN tcp6 0 0 :::22 :::* LISTEN root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch stop Killing: 850 root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start root@fs:/usr/local/freeswitch/bin# 923 Backgrounding. # ****** Note message above ********* root@fs:/usr/local/freeswitch/bin# netstat -ant Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp6 0 0 :::22 :::* LISTEN
Your opinions, please?
Thank you in advance, Eugene
=========================================================
Данное сообщение и любые вложения (<<Сообщение>>) являются конфиденциальными, предназначенными исключительно для адресатов, и могут содержать сведения, охраняемые в соответствии с законодательством. Любое несанкционированное использование или распространение Сообщения запрещено. Электронная почта не гарантирует подлинности Сообщений. Ни ЗАО "АКБ "БЕЛРОСБАНК", ни любые его подразделения или дочерние организации не несут ответственности за Сообщение в случае его подмены, изменения либо фальсификации.
=========================================================
This message and any attachments (the "message") are confidential, intended solely for the addressees, and may contain legally privileged information. Any unauthorized use or dissemination is prohibited. E-mails are susceptible to alteration. Neither JSC "BELROSBANK" nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified.
=========================================================
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you for your answer! Well, I use the latest git and init script from debian directory in the sources. Obviously, the problem is not solved at its roots yet, but I managed to bypass it by 'chowning' FS directory and setting user to 'root' in init script. On 10/02/12 20:38, Anton Kvashenkin wrote:
The first suggestion would be to use latest git and init script from http://wiki.freeswitch.org/wiki/Freeswitch_init.
10 февраля 2012 г. 15:53 пользователь Eugene Shcherbatyuk <shcherbatyuk@belrosbank.by <mailto:shcherbatyuk@belrosbank.by>> написал:
Hello,
The purpose was to evaluate FreeSwitch and decide whether to replace my Asterisks with it or not. I installed FS1.0.6 from git on Ubuntu Server 10.04.3 LTS. Everything went smoothly until FS did not start with the system today.
There are no errors in logs. FS starts in console fine. FS does not start in background mode nor from console (with -nc option) nor from init script. Even worse: FS can unexpectedly start (rarely) or do not start (often) with "backgrounding" message. Have a look at the console output below, please.
> root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start > # ******* FS started without a message ********* > root@fs:/usr/local/freeswitch/bin# netstat -ant > Active Internet connections (servers and established) > Proto Recv-Q Send-Q Local Address Foreign Address State > tcp 0 0 172.18.0.130:5060 <http://172.18.0.130:5060> 0.0.0.0:* LISTEN > tcp 0 0 127.0.0.1:8021 <http://127.0.0.1:8021> 0.0.0.0:* LISTEN > tcp 0 0 0.0.0.0:22 <http://0.0.0.0:22> 0.0.0.0:* LISTEN > tcp 0 0 172.18.0.130:5080 <http://172.18.0.130:5080> 0.0.0.0:* LISTEN > tcp6 0 0 ::1:5060 :::* LISTEN > tcp6 0 0 :::22 :::* LISTEN > root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch stop > Killing: 850 > root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start > root@fs:/usr/local/freeswitch/bin# 923 Backgrounding. > # ****** Note message above ********* > root@fs:/usr/local/freeswitch/bin# netstat -ant > Active Internet connections (servers and established) > Proto Recv-Q Send-Q Local Address Foreign Address State > tcp 0 0 0.0.0.0:22 <http://0.0.0.0:22> 0.0.0.0:* LISTEN > tcp6 0 0 :::22 :::* LISTEN
Your opinions, please?
Thank you in advance, Eugene
========================================================= Данное сообщение и любые вложения («Сообщение») являются конфиденциальными, предназначенными исключительно для адресатов, и могут содержать сведения, охраняемые в соответствии с законодательством. Любое несанкционированное использование или распространение Сообщения запрещено. Электронная почта не гарантирует подлинности Сообщений. Ни ЗАО "АКБ "БЕЛРОСБАНК", ни любые его подразделения или дочерние организации не несут ответственности за Сообщение в случае его подмены, изменения либо фальсификации. ========================================================= This message and any attachments (the “message”) are confidential, intended solely for the addressees, and may contain legally privileged information. Any unauthorized use or dissemination is prohibited. E-mails are susceptible to alteration. Neither JSC “BELROSBANK” nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified. =========================================================
А в чём именно проблема, опиши немножко поконкретней, пожалуйста. Давай сначала разберёмся с запуском FS просто из командной строки без всяких инит скриптов. Попробуй запустить freeswitch -nc, вывод запости на pasterbin. 13 февраля 2012 г. 10:22 пользователь Eugene Shcherbatyuk < shcherbatyuk@belrosbank.by> написал:
Thank you for your answer! Well, I use the latest git and init script from debian directory in the sources.
Obviously, the problem is not solved at its roots yet, but I managed to bypass it by 'chowning' FS directory and setting user to 'root' in init script.
On 10/02/12 20:38, Anton Kvashenkin wrote:
The first suggestion would be to use latest git and init script from http://wiki.freeswitch.org/wiki/Freeswitch_init.
10 февраля 2012 г. 15:53 пользователь Eugene Shcherbatyuk <shcherbatyuk@belrosbank.by <mailto:shcherbatyuk@belrosbank.by>> написал:
Hello,
The purpose was to evaluate FreeSwitch and decide whether to replace my Asterisks with it or not. I installed FS1.0.6 from git on Ubuntu Server 10.04.3 LTS. Everything went smoothly until FS did not start with the system today.
There are no errors in logs. FS starts in console fine. FS does not start in background mode nor from console (with -nc option) nor from init script. Even worse: FS can unexpectedly start (rarely) or do not start (often) with "backgrounding" message. Have a look at the console output below, please.
> root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start > # ******* FS started without a message ********* > root@fs:/usr/local/freeswitch/bin# netstat -ant > Active Internet connections (servers and established) > Proto Recv-Q Send-Q Local Address Foreign Address State > tcp 0 0 172.18.0.130:5060 <http://172.18.0.130:5060> 0.0.0.0:* LISTEN > tcp 0 0 127.0.0.1:8021 <http://127.0.0.1:8021> 0.0.0.0:* LISTEN > tcp 0 0 0.0.0.0:22 <http://0.0.0.0:22> 0.0.0.0:* LISTEN > tcp 0 0 172.18.0.130:5080 <http://172.18.0.130:5080> 0.0.0.0:* LISTEN > tcp6 0 0 ::1:5060 :::* LISTEN > tcp6 0 0 :::22 :::* LISTEN > root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch stop > Killing: 850 > root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start > root@fs:/usr/local/freeswitch/bin# 923 Backgrounding. > # ****** Note message above ********* > root@fs:/usr/local/freeswitch/bin# netstat -ant > Active Internet connections (servers and established) > Proto Recv-Q Send-Q Local Address Foreign Address State > tcp 0 0 0.0.0.0:22 <http://0.0.0.0:22> 0.0.0.0:* LISTEN > tcp6 0 0 :::22 :::* LISTEN
Your opinions, please?
Thank you in advance, Eugene
=========================================================
Данное сообщение и любые вложения (<<Сообщение>>) являются конфиденциальными, предназначенными исключительно для адресатов, и могут содержать сведения, охраняемые в соответствии с законодательством. Любое несанкционированное использование или распространение Сообщения запрещено. Электронная почта не гарантирует подлинности Сообщений. Ни ЗАО "АКБ "БЕЛРОСБАНК", ни любые его подразделения или дочерние организации не несут ответственности за Сообщение в случае его подмены, изменения либо фальсификации.
=========================================================
This message and any attachments (the "message") are confidential, intended solely for the addressees, and may contain legally privileged information. Any unauthorized use or dissemination is prohibited. E-mails are susceptible to alteration. Neither JSC "BELROSBANK" nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified.
=========================================================
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
For the sake of the rest of the list subscribers I would like to answer in English. More elaborate description of the problem follows. Installation went smooth. FS was configured to start as a daemon with freeswitch user privelegies and started fine at OS boot. Couple a days later I had downloaded some extra sound files and copied them into sounds directory. And all of sudden FS did not start after issuing '/etc/init.d/freeswitch restart' command. And it did not start after clean OS reboot. And it did not start from console in background mode (freeswitch -nc). And there was no output nor in system logs nor in FS own log file. Soon enough I have realised that copied files as root and ruined file permissions. After restoring file permissions command '/etc/init.d/freeswitch start' worked. But it worked only once: subsequent attempts to [re]start failed. The situation was reproducible. Finally I could get rid of the problem by setting FS directory ownership to root and starting FS as root in init script. On 13/02/12 14:59, Anton Kvashenkin wrote:
А в чём именно проблема, опиши немножко поконкретней, пожалуйста. Давай сначала разберёмся с запуском FS просто из командной строки без всяких инит скриптов. Попробуй запустить freeswitch -nc, вывод запости на pasterbin.
13 февраля 2012 г. 10:22 пользователь Eugene Shcherbatyuk <shcherbatyuk@belrosbank.by <mailto:shcherbatyuk@belrosbank.by>> написал:
Thank you for your answer! Well, I use the latest git and init script from debian directory in the sources.
Obviously, the problem is not solved at its roots yet, but I managed to bypass it by 'chowning' FS directory and setting user to 'root' in init script.
On 10/02/12 20:38, Anton Kvashenkin wrote: > The first suggestion would be to use latest git and init script from > http://wiki.freeswitch.org/wiki/Freeswitch_init. > > 10 февраля 2012 г. 15:53 пользователь Eugene Shcherbatyuk > <shcherbatyuk@belrosbank.by <mailto:shcherbatyuk@belrosbank.by> <mailto:shcherbatyuk@belrosbank.by <mailto:shcherbatyuk@belrosbank.by>>> написал: > > Hello, > > The purpose was to evaluate FreeSwitch and decide whether to replace my > Asterisks with it or not. I installed FS1.0.6 from git on Ubuntu Server > 10.04.3 LTS. Everything went smoothly until FS did not start with the > system today. > > There are no errors in logs. FS starts in console fine. FS does not > start in background mode nor from console (with -nc option) nor from > init script. Even worse: FS can unexpectedly start (rarely) or do not > start (often) with "backgrounding" message. Have a look at the console > output below, please. > > > root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start > > # ******* FS started without a message ********* > > root@fs:/usr/local/freeswitch/bin# netstat -ant > > Active Internet connections (servers and established) > > Proto Recv-Q Send-Q Local Address Foreign Address State > > tcp 0 0 172.18.0.130:5060 <http://172.18.0.130:5060> <http://172.18.0.130:5060> 0.0.0.0:* LISTEN > > tcp 0 0 127.0.0.1:8021 <http://127.0.0.1:8021> <http://127.0.0.1:8021> 0.0.0.0:* LISTEN > > tcp 0 0 0.0.0.0:22 <http://0.0.0.0:22> <http://0.0.0.0:22> 0.0.0.0:* LISTEN > > tcp 0 0 172.18.0.130:5080 <http://172.18.0.130:5080> <http://172.18.0.130:5080> 0.0.0.0:* LISTEN > > tcp6 0 0 ::1:5060 :::* LISTEN > > tcp6 0 0 :::22 :::* LISTEN > > root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch stop > > Killing: 850 > > root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start > > root@fs:/usr/local/freeswitch/bin# 923 Backgrounding. > > # ****** Note message above ********* > > root@fs:/usr/local/freeswitch/bin# netstat -ant > > Active Internet connections (servers and established) > > Proto Recv-Q Send-Q Local Address Foreign Address State > > tcp 0 0 0.0.0.0:22 <http://0.0.0.0:22> <http://0.0.0.0:22> 0.0.0.0:* LISTEN > > tcp6 0 0 :::22 :::* LISTEN > > Your opinions, please? > > Thank you in advance, > Eugene >
========================================================= Данное сообщение и любые вложения («Сообщение») являются конфиденциальными, предназначенными исключительно для адресатов, и могут содержать сведения, охраняемые в соответствии с законодательством. Любое несанкционированное использование или распространение Сообщения запрещено. Электронная почта не гарантирует подлинности Сообщений. Ни ЗАО "АКБ "БЕЛРОСБАНК", ни любые его подразделения или дочерние организации не несут ответственности за Сообщение в случае его подмены, изменения либо фальсификации. ========================================================= This message and any attachments (the “message”) are confidential, intended solely for the addressees, and may contain legally privileged information. Any unauthorized use or dissemination is prohibited. E-mails are susceptible to alteration. Neither JSC “BELROSBANK” nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified. =========================================================
chown -R freeswitch:daemon /usr/local/freeswitch/ chmod -R o-rwx /usr/local/freeswitch/ And do not forget to change init script for user running FreeSWITCH. 13 февраля 2012 г. 17:10 пользователь Eugene Shcherbatyuk < shcherbatyuk@belrosbank.by> написал:
For the sake of the rest of the list subscribers I would like to answer in English. More elaborate description of the problem follows.
Installation went smooth. FS was configured to start as a daemon with freeswitch user privelegies and started fine at OS boot.
Couple a days later I had downloaded some extra sound files and copied them into sounds directory. And all of sudden FS did not start after issuing '/etc/init.d/freeswitch restart' command. And it did not start after clean OS reboot. And it did not start from console in background mode (freeswitch -nc). And there was no output nor in system logs nor in FS own log file.
Soon enough I have realised that copied files as root and ruined file permissions. After restoring file permissions command '/etc/init.d/freeswitch start' worked. But it worked only once: subsequent attempts to [re]start failed. The situation was reproducible.
Finally I could get rid of the problem by setting FS directory ownership to root and starting FS as root in init script.
On 13/02/12 14:59, Anton Kvashenkin wrote:
А в чём именно проблема, опиши немножко поконкретней, пожалуйста. Давай сначала разберёмся с запуском FS просто из командной строки без всяких инит скриптов. Попробуй запустить freeswitch -nc, вывод запости на pasterbin.
13 февраля 2012 г. 10:22 пользователь Eugene Shcherbatyuk <shcherbatyuk@belrosbank.by <mailto:shcherbatyuk@belrosbank.by>> написал:
Thank you for your answer! Well, I use the latest git and init script from debian directory in the sources.
Obviously, the problem is not solved at its roots yet, but I managed to bypass it by 'chowning' FS directory and setting user to 'root' in init script.
On 10/02/12 20:38, Anton Kvashenkin wrote: > The first suggestion would be to use latest git and init script from > http://wiki.freeswitch.org/wiki/Freeswitch_init. > > 10 февраля 2012 г. 15:53 пользователь Eugene Shcherbatyuk > <shcherbatyuk@belrosbank.by <mailto:shcherbatyuk@belrosbank.by> <mailto:shcherbatyuk@belrosbank.by <mailto:shcherbatyuk@belrosbank.by>>> написал: > > Hello, > > The purpose was to evaluate FreeSwitch and decide whether to replace my > Asterisks with it or not. I installed FS1.0.6 from git on Ubuntu Server > 10.04.3 LTS. Everything went smoothly until FS did not start with the > system today. > > There are no errors in logs. FS starts in console fine. FS does not > start in background mode nor from console (with -nc option) nor from > init script. Even worse: FS can unexpectedly start (rarely) or do not > start (often) with "backgrounding" message. Have a look at the console > output below, please. > > > root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start > > # ******* FS started without a message ********* > > root@fs:/usr/local/freeswitch/bin# netstat -ant > > Active Internet connections (servers and established) > > Proto Recv-Q Send-Q Local Address Foreign Address State > > tcp 0 0 172.18.0.130:5060 <http://172.18.0.130:5060> <http://172.18.0.130:5060> 0.0.0.0:* LISTEN > > tcp 0 0 127.0.0.1:8021 <http://127.0.0.1:8021> <http://127.0.0.1:8021> 0.0.0.0:* LISTEN > > tcp 0 0 0.0.0.0:22 <http://0.0.0.0:22> <http://0.0.0.0:22> 0.0.0.0:* LISTEN > > tcp 0 0 172.18.0.130:5080 <http://172.18.0.130:5080> <http://172.18.0.130:5080> 0.0.0.0:* LISTEN > > tcp6 0 0 ::1:5060 :::* LISTEN > > tcp6 0 0 :::22 :::* LISTEN > > root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch stop > > Killing: 850 > > root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start > > root@fs:/usr/local/freeswitch/bin# 923 Backgrounding. > > # ****** Note message above ********* > > root@fs:/usr/local/freeswitch/bin# netstat -ant > > Active Internet connections (servers and established) > > Proto Recv-Q Send-Q Local Address Foreign Address State > > tcp 0 0 0.0.0.0:22 <http://0.0.0.0:22> <http://0.0.0.0:22> 0.0.0.0:* LISTEN > > tcp6 0 0 :::22 :::* LISTEN > > Your opinions, please? > > Thank you in advance, > Eugene >
=========================================================
Данное сообщение и любые вложения (<<Сообщение>>) являются конфиденциальными, предназначенными исключительно для адресатов, и могут содержать сведения, охраняемые в соответствии с законодательством. Любое несанкционированное использование или распространение Сообщения запрещено. Электронная почта не гарантирует подлинности Сообщений. Ни ЗАО "АКБ "БЕЛРОСБАНК", ни любые его подразделения или дочерние организации не несут ответственности за Сообщение в случае его подмены, изменения либо фальсификации.
=========================================================
This message and any attachments (the "message") are confidential, intended solely for the addressees, and may contain legally privileged information. Any unauthorized use or dissemination is prohibited. E-mails are susceptible to alteration. Neither JSC "BELROSBANK" nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified.
=========================================================
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
try to see what FS says cd /usr/local/freeswitch/bin ./fs_cli If it does not connect, then you ve a problem in FS. It seems an XML is not correct --- On Fri, 2/10/12, Eugene Shcherbatyuk <shcherbatyuk@belrosbank.by> wrote: From: Eugene Shcherbatyuk <shcherbatyuk@belrosbank.by> Subject: [Freeswitch-users] FreeSwitch does not start in the background To: freeswitch-users@lists.freeswitch.org Date: Friday, February 10, 2012, 1:53 PM Hello, The purpose was to evaluate FreeSwitch and decide whether to replace my Asterisks with it or not. I installed FS1.0.6 from git on Ubuntu Server 10.04.3 LTS. Everything went smoothly until FS did not start with the system today. There are no errors in logs. FS starts in console fine. FS does not start in background mode nor from console (with -nc option) nor from init script. Even worse: FS can unexpectedly start (rarely) or do not start (often) with "backgrounding" message. Have a look at the console output below, please.
root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start # ******* FS started without a message ********* root@fs:/usr/local/freeswitch/bin# netstat -ant Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 172.18.0.130:5060 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:8021 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 172.18.0.130:5080 0.0.0.0:* LISTEN tcp6 0 0 ::1:5060 :::* LISTEN tcp6 0 0 :::22 :::* LISTEN root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch stop Killing: 850 root@fs:/usr/local/freeswitch/bin# /etc/init.d/freeswitch start root@fs:/usr/local/freeswitch/bin# 923 Backgrounding. # ****** Note message above ********* root@fs:/usr/local/freeswitch/bin# netstat -ant Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp6 0 0 :::22 :::* LISTEN
Your opinions, please? Thank you in advance, Eugene ========================================================= Данное сообщение и любые вложения («Сообщение») являются конфиденциальными, предназначенными исключительно для адресатов, и могут содержать сведения, охраняемые в соответствии с законодательством. Любое несанкционированное использование или распространение Сообщения запрещено. Электронная почта не гарантирует подлинности Сообщений. Ни ЗАО "АКБ "БЕЛРОСБАНК", ни любые его подразделения или дочерние организации не несут ответственности за Сообщение в случае его подмены, изменения либо фальсификации. ========================================================= This message and any attachments (the “message”) are confidential, intended solely for the addressees, and may contain legally privileged information. Any unauthorized use or dissemination is prohibited. E-mails are susceptible to alteration. Neither JSC “BELROSBANK” nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified. ========================================================= _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Anton Kvashenkin
-
Eugene Shcherbatyuk
-
Sherif Omran