Uninstalling freeswitch after compiling and installing from source
Hi, I made a noob mistake and ran the script for installing freeswitch from binaries without doing logs on the process and fs_cli is complaining that commands are not found. specifically, sofia status, or sofia status profile <name> but im sure that it extends further than that. I'm dont know how to get a list of the commands available. typing in help (not /help) at the prompt says it can't find a command. So i've installed it and it doesn't seem to be working, and don't know how to uninstall it. Where can i find a list of acceptable commands for the configure command? Im trying to enable sctp, but when looking through the logs for it you have a line: checking whether SCTP is supported... yes is this the same as checking with the --enable-sctp flag? (when looking at the logs for the added command there's no extra lines pertaining to enable-sctp as if you didn't specify it). I'm running the latest build from the github repository. When running this command: ./configure --enable-sctp > /home/fleetchat/config.log it keeps on displaying errors on output, but don't know if they're serious or not. ./configure: line 31222: php-config: command not found ./configure: line 31223: php-config: command not found ./configure: line 31224: php-config: command not found ./configure: line 31225: php: command not found ./configure: line 31226: php-config: command not found ./configure: line 31227: php-config: command not found ./configure: line 5306: AX_COMPILER_VENDOR: command not found rm: cannot remove 'conftest*': No such file or directory ./configure: line 19537: test: 3.16.0-4-amd64: integer expression expected ./configure: line 19819: test: 3.16.0-4-amd64: integer expression expected config.status: WARNING: 'apr-config.in' seems to ignore the --datarootdir setting rm: cannot remove 'libtoolT': No such file or directory config.status: WARNING: 'Makefile.in' seems to ignore the --datarootdir setting config.status: WARNING: 'lib/Makefile.in' seems to ignore the --datarootdir setting configure: WARNING: ** STUN support disabled ** Im sure it's somewhere but i also don't know where the configuration files should be located when building from source. i placed them in /etc/freeswitch. From memory that was where the installation instructions said they should be located. The configuration files were downloaded from the ubuntu repository command freeswitch-meta-vanilla The reason they come from the ubuntu repository is because i had freeswitch set up on ubuntu 16.04 but found out debian was the recommended OS. I'm running freeswitch on debian 8.8 now. Nathan -- *Virtual Guard Ltd* *info@virtualguard.co.nz <info@virtualguard.co.nz>*
Depends how you configured, when compiling from source configs default to /usr/local/freeswitch/conf
On May 17, 2017, at 7:02 PM, Ravi sanyal <virtualguard2015@gmail.com> wrote:
Hi,
I made a noob mistake and ran the script for installing freeswitch from binaries without doing logs on the process and fs_cli is complaining that commands are not found.
specifically, sofia status, or sofia status profile <name> but im sure that it extends further than that. I'm dont know how to get a list of the commands available. typing in help (not /help) at the prompt says it can't find a command.
So i've installed it and it doesn't seem to be working, and don't know how to uninstall it.
Where can i find a list of acceptable commands for the configure command?
Im trying to enable sctp, but when looking through the logs for it you have a line:
checking whether SCTP is supported... yes
is this the same as checking with the --enable-sctp flag? (when looking at the logs for the added command there's no extra lines pertaining to enable-sctp as if you didn't specify it).
I'm running the latest build from the github repository.
When running this command:
./configure --enable-sctp > /home/fleetchat/config.log
it keeps on displaying errors on output, but don't know if they're serious or not.
./configure: line 31222: php-config: command not found ./configure: line 31223: php-config: command not found ./configure: line 31224: php-config: command not found ./configure: line 31225: php: command not found ./configure: line 31226: php-config: command not found ./configure: line 31227: php-config: command not found ./configure: line 5306: AX_COMPILER_VENDOR: command not found rm: cannot remove 'conftest*': No such file or directory ./configure: line 19537: test: 3.16.0-4-amd64: integer expression expected ./configure: line 19819: test: 3.16.0-4-amd64: integer expression expected config.status: WARNING: 'apr-config.in <http://apr-config.in/>' seems to ignore the --datarootdir setting rm: cannot remove 'libtoolT': No such file or directory config.status: WARNING: 'Makefile.in' seems to ignore the --datarootdir setting config.status: WARNING: 'lib/Makefile.in' seems to ignore the --datarootdir setting configure: WARNING: ** STUN support disabled **
Im sure it's somewhere but i also don't know where the configuration files should be located when building from source. i placed them in /etc/freeswitch. From memory that was where the installation instructions said they should be located.
The configuration files were downloaded from the ubuntu repository command freeswitch-meta-vanilla
The reason they come from the ubuntu repository is because i had freeswitch set up on ubuntu 16.04 but found out debian was the recommended OS. I'm running freeswitch on debian 8.8 now.
Nathan
-- Virtual Guard Ltd info@virtualguard.co.nz <mailto:info@virtualguard.co.nz>_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I'm assuming you're starting off with FS, If you're on debian and this is a fresh install, you're probably better off reinstalling debian and installing from apt following: https://freeswitch.org/confluence/plugins/servlet/mobile#content/view/963381... On the "easy way" part. On Thu, May 18, 2017 at 6:21 PM Michael Jerris <mike@jerris.com> wrote:
Depends how you configured, when compiling from source configs default to /usr/local/freeswitch/conf
On May 17, 2017, at 7:02 PM, Ravi sanyal <virtualguard2015@gmail.com> wrote:
Hi,
I made a noob mistake and ran the script for installing freeswitch from binaries without doing logs on the process and fs_cli is complaining that commands are not found.
specifically, sofia status, or sofia status profile <name> but im sure that it extends further than that. I'm dont know how to get a list of the commands available. typing in help (not /help) at the prompt says it can't find a command.
So i've installed it and it doesn't seem to be working, and don't know how to uninstall it.
Where can i find a list of acceptable commands for the configure command?
Im trying to enable sctp, but when looking through the logs for it you have a line:
checking whether SCTP is supported... yes
is this the same as checking with the --enable-sctp flag? (when looking at the logs for the added command there's no extra lines pertaining to enable-sctp as if you didn't specify it).
I'm running the latest build from the github repository.
When running this command:
./configure --enable-sctp > /home/fleetchat/config.log
it keeps on displaying errors on output, but don't know if they're serious or not.
./configure: line 31222: php-config: command not found ./configure: line 31223: php-config: command not found ./configure: line 31224: php-config: command not found ./configure: line 31225: php: command not found ./configure: line 31226: php-config: command not found ./configure: line 31227: php-config: command not found ./configure: line 5306: AX_COMPILER_VENDOR: command not found rm: cannot remove 'conftest*': No such file or directory ./configure: line 19537: test: 3.16.0-4-amd64: integer expression expected ./configure: line 19819: test: 3.16.0-4-amd64: integer expression expected config.status: WARNING: 'apr-config.in' seems to ignore the --datarootdir setting rm: cannot remove 'libtoolT': No such file or directory config.status: WARNING: 'Makefile.in' seems to ignore the --datarootdir setting config.status: WARNING: 'lib/Makefile.in' seems to ignore the --datarootdir setting configure: WARNING: ** STUN support disabled **
Im sure it's somewhere but i also don't know where the configuration files should be located when building from source. i placed them in /etc/freeswitch. From memory that was where the installation instructions said they should be located.
The configuration files were downloaded from the ubuntu repository command freeswitch-meta-vanilla
The reason they come from the ubuntu repository is because i had freeswitch set up on ubuntu 16.04 but found out debian was the recommended OS. I'm running freeswitch on debian 8.8 now.
Nathan
--
*Virtual Guard Ltd* *info@virtualguard.co.nz <info@virtualguard.co.nz>* _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
The debian packages we build have SCTP enabled by default. Just an FYI. /b On Thu, May 18, 2017 at 11:46 AM, David Villasmil < david.villasmil.work@gmail.com> wrote:
I'm assuming you're starting off with FS, If you're on debian and this is a fresh install, you're probably better off reinstalling debian and installing from apt following:
https://freeswitch.org/confluence/plugins/servlet/ mobile#content/view/9633817
On the "easy way" part.
On Thu, May 18, 2017 at 6:21 PM Michael Jerris <mike@jerris.com> wrote:
Depends how you configured, when compiling from source configs default to /usr/local/freeswitch/conf
On May 17, 2017, at 7:02 PM, Ravi sanyal <virtualguard2015@gmail.com> wrote:
Hi,
I made a noob mistake and ran the script for installing freeswitch from binaries without doing logs on the process and fs_cli is complaining that commands are not found.
specifically, sofia status, or sofia status profile <name> but im sure that it extends further than that. I'm dont know how to get a list of the commands available. typing in help (not /help) at the prompt says it can't find a command.
So i've installed it and it doesn't seem to be working, and don't know how to uninstall it.
Where can i find a list of acceptable commands for the configure command?
Im trying to enable sctp, but when looking through the logs for it you have a line:
checking whether SCTP is supported... yes
is this the same as checking with the --enable-sctp flag? (when looking at the logs for the added command there's no extra lines pertaining to enable-sctp as if you didn't specify it).
I'm running the latest build from the github repository.
When running this command:
./configure --enable-sctp > /home/fleetchat/config.log
it keeps on displaying errors on output, but don't know if they're serious or not.
./configure: line 31222: php-config: command not found ./configure: line 31223: php-config: command not found ./configure: line 31224: php-config: command not found ./configure: line 31225: php: command not found ./configure: line 31226: php-config: command not found ./configure: line 31227: php-config: command not found ./configure: line 5306: AX_COMPILER_VENDOR: command not found rm: cannot remove 'conftest*': No such file or directory ./configure: line 19537: test: 3.16.0-4-amd64: integer expression expected ./configure: line 19819: test: 3.16.0-4-amd64: integer expression expected config.status: WARNING: 'apr-config.in' seems to ignore the --datarootdir setting rm: cannot remove 'libtoolT': No such file or directory config.status: WARNING: 'Makefile.in' seems to ignore the --datarootdir setting config.status: WARNING: 'lib/Makefile.in' seems to ignore the --datarootdir setting configure: WARNING: ** STUN support disabled **
Im sure it's somewhere but i also don't know where the configuration files should be located when building from source. i placed them in /etc/freeswitch. From memory that was where the installation instructions said they should be located.
The configuration files were downloaded from the ubuntu repository command freeswitch-meta-vanilla
The reason they come from the ubuntu repository is because i had freeswitch set up on ubuntu 16.04 but found out debian was the recommended OS. I'm running freeswitch on debian 8.8 now.
Nathan
--
*Virtual Guard Ltd* *info@virtualguard.co.nz <info@virtualguard.co.nz>* _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Brian West* brian@freeswitch.org *Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com Book a phone call (CST) <https://freeswitch.com/appointment> Allison prompts for FreeSWITCH: *https://www.gofundme.com/allison-prompts-for-freeswitch* <https://www.gofundme.com/allison-prompts-for-freeswitch> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *Skype:*briankwest
participants (4)
-
Brian West
-
David Villasmil
-
Michael Jerris
-
Ravi sanyal