For us, at the time, it was primarily getting the Mitel to keep a solid registration (this was over the Internet, and if I recall through NAT too). One thing I vaguely remember was that there was a problem identified with the nonce coming back not matching on subsequent registrations after the first. We knew nothing about the Mitel box, and the people who did were a little unhelpful. Putting the Asterisk box in the middle fixed all issues at the time, but this has not been revisited for 12 months. Perhaps things are a little different now, or you can get away without needing registration ? Brent On Tue, Apr 13, 2010 at 9:22 AM, Kenneth Noisewater <noisewaterphd@gmail.com

wrote:

Can you explain a little bit about what your issues with this type of setup were? I'm very curious, any info will certainly help me.

Thanks

On Fri, Apr 9, 2010 at 2:11 PM, Brent Paddon <brent@overthewire.com.au>wrote:

...

We had a lot of problems getting this to work properly for us (exact same Mitel box), but the last time we looked at it was probably 12 months ago. We ended up with an asterisk box in between FS and the Mitel. I would like to know if you have more success than us - perhaps we can revisit this one.

Brent

On Sat, Apr 10, 2010 at 2:08 AM, Kenneth Noisewater < noisewaterphd@gmail.com> wrote:

...

Hi,

I've already read the interop list, but I'm wondering if anyone on here has anymore experience/info on trunking freeswitch to a Mitel 3300?

Specifically, I want to use freeswitch for acd and sip registrations, and just use our mitel for switching to the PSTN.

Does anyone have some good info to share?

Thanks,

Kenny

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- -- Brent Paddon

Director | Over the Wire Pty Ltd brent.paddon@overthewire.com.au | www.overthewire.com.au Phone: 07 3847 9292 | Fax: 07 3847 9696 | Mobile: 0400 2400 54

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- -- Brent Paddon Director | Over the Wire Pty Ltd brent.paddon@overthewire.com.au | www.overthewire.com.au Phone: 07 3847 9292 | Fax: 07 3847 9696 | Mobile: 0400 2400 54

Hi, We are wanting to set up a new support department, all of the agents will register to Freeswitch (SIP). We will use Freeswitch for IVR, and some custom integration into some systems here. All calls will come in, and go out through the Mitel (T1/E1 cards). I should have a SIP Trunk license for the Mitel this week, after which I might have some more specific issues, but for now I was just putting out a feeler to make sure there weren't any known issues connecting to the Mitel stuff. I've had a few private replies, and drummed up some stuff on IRC, and it sounds like this should work out quite smoothly. Thanks, Kenny On Fri, Apr 9, 2010 at 5:34 PM, Dan Le <dule.maillist@gmail.com> wrote:

Can you be a bit more specific what you want to accomplish?

We often trunk to a 3300 and I know many that have done so without issues; the configuration is quite straightforward. Gateway configs in FS, SIP Peer Profile (+ all the dependent forms) in the 3300 and you're pretty much good to go. Sorry I don't know what kind of information you're looking for in particular.

Dan

On Fri, Apr 9, 2010 at 12:08 PM, Kenneth Noisewater < noisewaterphd@gmail.com> wrote:

...

Hi,

I've already read the interop list, but I'm wondering if anyone on here has anymore experience/info on trunking freeswitch to a Mitel 3300?

Specifically, I want to use freeswitch for acd and sip registrations, and just use our mitel for switching to the PSTN.

Does anyone have some good info to share?

Thanks,

Kenny

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org