Best current ATA and Setup for Faxing
Hi Folks, We had previously been working with the Cisco SPA112 for T.38 Faxing through Freeswitch and out to Flowroute. At the time we didn't get it working 100% perfectly. I now have one of these SPA112's that I need to replace because someone fried it by plugging in a much larger power supply by accident. Is my scenario above still a good starting point for Faxing or should I be looking at another ATA or provider other than Flowroute? Also, one more question, and this may be better suited to the business list (let me know if I should move it there), but we are looking for a part time as needed remote or local Freeswitch Admin / Engineer / Tech. Our previous person is MIA. Thanks Everyone! -Chris
I havent used the cisco atas, but I've had good success with the grand stream ht502s and ht702s. My preferred faxing carrier is also flowroute. Nick On Feb 13, 2013, at 8:02 AM, Chris Ferreira <chris@gonumina.com> wrote:
Hi Folks,
We had previously been working with the Cisco SPA112 for T.38 Faxing through Freeswitch and out to Flowroute. At the time we didn't get it working 100% perfectly.
I now have one of these SPA112's that I need to replace because someone fried it by plugging in a much larger power supply by accident.
Is my scenario above still a good starting point for Faxing or should I be looking at another ATA or provider other than Flowroute?
Also, one more question, and this may be better suited to the business list (let me know if I should move it there), but we are looking for a part time as needed remote or local Freeswitch Admin / Engineer / Tech. Our previous person is MIA.
Thanks Everyone!
-Chris _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Can you please share with us the setting for fax, if you don't mind. On Feb 13, 2013 11:17 AM, "Nick Vines" <jnvines@gmail.com> wrote:
I havent used the cisco atas, but I've had good success with the grand stream ht502s and ht702s. My preferred faxing carrier is also flowroute.
Nick
On Feb 13, 2013, at 8:02 AM, Chris Ferreira <chris@gonumina.com> wrote:
Hi Folks,
We had previously been working with the Cisco SPA112 for T.38 Faxing through Freeswitch and out to Flowroute. At the time we didn't get it working 100% perfectly.
I now have one of these SPA112's that I need to replace because someone fried it by plugging in a much larger power supply by accident.
Is my scenario above still a good starting point for Faxing or should I be looking at another ATA or provider other than Flowroute?
Also, one more question, and this may be better suited to the business list (let me know if I should move it there), but we are looking for a part time as needed remote or local Freeswitch Admin / Engineer / Tech. Our previous person is MIA.
Thanks Everyone!
-Chris _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Well, this ATA died, and I don't have a backup of it's config when we were using it for Fax testing. We went through a number of tweaks and firmware upgrades. This is months ago. I'm more looking for whats the best starting point for a new ATA. At the time it seemed like it was the SPA112, but that was 6 months ago. Just wondering if this is still a good starting point, or if I should be checking out a new ATA or provider. Thanks, -Chris On Wed, Feb 13, 2013 at 2:47 PM, George Assaad <gassaad@emassembly.com>wrote:
Can you please share with us the setting for fax, if you don't mind. On Feb 13, 2013 11:17 AM, "Nick Vines" <jnvines@gmail.com> wrote:
I havent used the cisco atas, but I've had good success with the grand stream ht502s and ht702s. My preferred faxing carrier is also flowroute.
Nick
On Feb 13, 2013, at 8:02 AM, Chris Ferreira <chris@gonumina.com> wrote:
Hi Folks,
We had previously been working with the Cisco SPA112 for T.38 Faxing through Freeswitch and out to Flowroute. At the time we didn't get it working 100% perfectly.
I now have one of these SPA112's that I need to replace because someone fried it by plugging in a much larger power supply by accident.
Is my scenario above still a good starting point for Faxing or should I be looking at another ATA or provider other than Flowroute?
Also, one more question, and this may be better suited to the business list (let me know if I should move it there), but we are looking for a part time as needed remote or local Freeswitch Admin / Engineer / Tech. Our previous person is MIA.
Thanks Everyone!
-Chris
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Sorry I meant to ask for the set up of the ht-502 On Feb 13, 2013 4:27 PM, "Chris Ferreira" <chris@gonumina.com> wrote:
Well, this ATA died, and I don't have a backup of it's config when we were using it for Fax testing. We went through a number of tweaks and firmware upgrades. This is months ago.
I'm more looking for whats the best starting point for a new ATA. At the time it seemed like it was the SPA112, but that was 6 months ago. Just wondering if this is still a good starting point, or if I should be checking out a new ATA or provider.
Thanks,
-Chris
On Wed, Feb 13, 2013 at 2:47 PM, George Assaad <gassaad@emassembly.com>wrote:
Can you please share with us the setting for fax, if you don't mind. On Feb 13, 2013 11:17 AM, "Nick Vines" <jnvines@gmail.com> wrote:
I havent used the cisco atas, but I've had good success with the grand stream ht502s and ht702s. My preferred faxing carrier is also flowroute.
Nick
On Feb 13, 2013, at 8:02 AM, Chris Ferreira <chris@gonumina.com> wrote:
Hi Folks,
We had previously been working with the Cisco SPA112 for T.38 Faxing through Freeswitch and out to Flowroute. At the time we didn't get it working 100% perfectly.
I now have one of these SPA112's that I need to replace because someone fried it by plugging in a much larger power supply by accident.
Is my scenario above still a good starting point for Faxing or should I be looking at another ATA or provider other than Flowroute?
Also, one more question, and this may be better suited to the business list (let me know if I should move it there), but we are looking for a part time as needed remote or local Freeswitch Admin / Engineer / Tech. Our previous person is MIA.
Thanks Everyone!
-Chris
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I set the following on the Ht502 when I am using that line for faxing. P codes given are for the 1st account on the device. 1) Disabling Line Echo Canceller, P824=1 2) Fax Mode T.38 Auto-Detect, P228=0 3) Fax Tone Detection Caller or Callee, P894=2 On freeswitch, I set this before I bridge the call. <action application="export" data="t38_passthru=true"/> If your provider doesn't support T.38, this will cause a "Not Allowed" hangup, but with Flowroute it has been working flawlessly. Nick On Wed, Feb 13, 2013 at 2:02 PM, George Assaad <gassaad@emassembly.com>wrote:
Sorry I meant to ask for the set up of the ht-502 On Feb 13, 2013 4:27 PM, "Chris Ferreira" <chris@gonumina.com> wrote:
Well, this ATA died, and I don't have a backup of it's config when we were using it for Fax testing. We went through a number of tweaks and firmware upgrades. This is months ago.
I'm more looking for whats the best starting point for a new ATA. At the time it seemed like it was the SPA112, but that was 6 months ago. Just wondering if this is still a good starting point, or if I should be checking out a new ATA or provider.
Thanks,
-Chris
On Wed, Feb 13, 2013 at 2:47 PM, George Assaad <gassaad@emassembly.com>wrote:
Can you please share with us the setting for fax, if you don't mind. On Feb 13, 2013 11:17 AM, "Nick Vines" <jnvines@gmail.com> wrote:
I havent used the cisco atas, but I've had good success with the grand stream ht502s and ht702s. My preferred faxing carrier is also flowroute.
Nick
On Feb 13, 2013, at 8:02 AM, Chris Ferreira <chris@gonumina.com> wrote:
Hi Folks,
We had previously been working with the Cisco SPA112 for T.38 Faxing through Freeswitch and out to Flowroute. At the time we didn't get it working 100% perfectly.
I now have one of these SPA112's that I need to replace because someone fried it by plugging in a much larger power supply by accident.
Is my scenario above still a good starting point for Faxing or should I be looking at another ATA or provider other than Flowroute?
Also, one more question, and this may be better suited to the business list (let me know if I should move it there), but we are looking for a part time as needed remote or local Freeswitch Admin / Engineer / Tech. Our previous person is MIA.
Thanks Everyone!
-Chris
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks a million On Feb 13, 2013 6:05 PM, "Nick Vines" <jnvines@gmail.com> wrote:
I set the following on the Ht502 when I am using that line for faxing. P codes given are for the 1st account on the device.
1) Disabling Line Echo Canceller, P824=1 2) Fax Mode T.38 Auto-Detect, P228=0 3) Fax Tone Detection Caller or Callee, P894=2
On freeswitch, I set this before I bridge the call. <action application="export" data="t38_passthru=true"/>
If your provider doesn't support T.38, this will cause a "Not Allowed" hangup, but with Flowroute it has been working flawlessly.
Nick
On Wed, Feb 13, 2013 at 2:02 PM, George Assaad <gassaad@emassembly.com>wrote:
Sorry I meant to ask for the set up of the ht-502 On Feb 13, 2013 4:27 PM, "Chris Ferreira" <chris@gonumina.com> wrote:
Well, this ATA died, and I don't have a backup of it's config when we were using it for Fax testing. We went through a number of tweaks and firmware upgrades. This is months ago.
I'm more looking for whats the best starting point for a new ATA. At the time it seemed like it was the SPA112, but that was 6 months ago. Just wondering if this is still a good starting point, or if I should be checking out a new ATA or provider.
Thanks,
-Chris
On Wed, Feb 13, 2013 at 2:47 PM, George Assaad <gassaad@emassembly.com>wrote:
Can you please share with us the setting for fax, if you don't mind. On Feb 13, 2013 11:17 AM, "Nick Vines" <jnvines@gmail.com> wrote:
I havent used the cisco atas, but I've had good success with the grand stream ht502s and ht702s. My preferred faxing carrier is also flowroute.
Nick
On Feb 13, 2013, at 8:02 AM, Chris Ferreira <chris@gonumina.com> wrote:
Hi Folks,
We had previously been working with the Cisco SPA112 for T.38 Faxing through Freeswitch and out to Flowroute. At the time we didn't get it working 100% perfectly.
I now have one of these SPA112's that I need to replace because someone fried it by plugging in a much larger power supply by accident.
Is my scenario above still a good starting point for Faxing or should I be looking at another ATA or provider other than Flowroute?
Also, one more question, and this may be better suited to the business list (let me know if I should move it there), but we are looking for a part time as needed remote or local Freeswitch Admin / Engineer / Tech. Our previous person is MIA.
Thanks Everyone!
-Chris
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Chris Ferreira
-
George Assaad
-
Nick Vines
-
Steven Schoch