newbie question (first build): FreeSWITCH just "hangs" when I run it
Hoping someone can help out a newbie figure out what I'm doing wrong. This is my first attempt at building and I keep running into same issue each time. Any pointers would be greatly appreciated. My problem is that FreeSWITHC seems to just get stuck when I try to run the binary. And and if I execute with -ncwait optoin, it keeps spitting out a line saying that it is waiting for background process to be ready This is what happens when I try to run the compiled system on a home ESXi server in my internal home network. # ./freeswitch 2014-06-22 21:23:06.011792 [INFO] switch_event.c:670 Activate Eventing Engine. 2014-06-22 21:23:06.011947 [WARNING] switch_event.c:652 Create additional event dispatch thread 0 <and then just sits there.... > BUILD VERSION: - Debian-7.5.0-amd64-netinst.iso - FreeSWITCH master (git:git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>)* TEST MACHINE: ESXi 5.1 VM - Debian GNU/Linus 6 (64 bit) - 1 CPU - 1 GB RAM - 16GB Memory - 1 NIC = E1000 INSTALLATION STEPS with output piped through 'tee' to capture logs: su (apt-get update 2>&1) | tee ~/apt-get-update.txt (apt-get upgrade 2>&1) | tee ~/apt-get-upgrade.txt (dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections.txt (apt-get install autoconf automake devscripts gawk g++ git-core libjpeg-dev libncurses5-dev libtool make python-dev gawk pkg-config libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns.dev libpq-dev 2>&1) | tee ~/apt-get.txt (dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections-after-apt-get.txt cd /usr/src (git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>* 2>&1) | tee ~/git.txt cd /usr/src/freeswitch (./bootstrap.sh 2>&1) | tee ~/bootstrap.txt # same result if I add flag -j (./configure --enable-core-pgsql-support 2>&1) | tee ~/configure.txt (make install 2>&1) | tee ~/make-install.txt (make all cd-sounds-install cd-moh-install 2>&1) | tee ~make-sounds.txt cd /usr/local/freeswitch/bin #./freeswitch
I don't think you're doing anything wrong at all. My installation was working fine until I decided to update. I also am running Debian 7 on Amd64 like you. In fact I just did a make current and now I have the same problem you're referring. The freeswitch daemon now consumes around 95% of the CPU when starting and just sits there indefinitely. I'm running strace now http://www.cyberciti.biz/tips/linux-strace-command-examples.html to see if I can figure out why the update seems to have broken my freeswitch install. On Mon, Jun 23, 2014 at 5:39 AM, Craig Stevenson <craig@stevenson.com> wrote:
Hoping someone can help out a newbie figure out what I'm doing wrong. This is my first attempt at building and I keep running into same issue each time. Any pointers would be greatly appreciated.
My problem is that FreeSWITHC seems to just get stuck when I try to run the binary. And and if I execute with -ncwait optoin, it keeps spitting out a line saying that it is waiting for background process to be ready
This is what happens when I try to run the compiled system on a home ESXi server in my internal home network.
# ./freeswitch 2014-06-22 21:23:06.011792 [INFO] switch_event.c:670 Activate Eventing Engine. 2014-06-22 21:23:06.011947 [WARNING] switch_event.c:652 Create additional event dispatch thread 0 <and then just sits there.... >
BUILD VERSION: - Debian-7.5.0-amd64-netinst.iso - FreeSWITCH master (git:git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>)*
TEST MACHINE: ESXi 5.1 VM - Debian GNU/Linus 6 (64 bit) - 1 CPU - 1 GB RAM - 16GB Memory - 1 NIC = E1000
INSTALLATION STEPS with output piped through 'tee' to capture logs:
su (apt-get update 2>&1) | tee ~/apt-get-update.txt (apt-get upgrade 2>&1) | tee ~/apt-get-upgrade.txt (dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections.txt
(apt-get install autoconf automake devscripts gawk g++ git-core libjpeg-dev libncurses5-dev libtool make python-dev gawk pkg-config libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns.dev libpq-dev 2>&1) | tee ~/apt-get.txt
(dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections-after-apt-get.txt
cd /usr/src (git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>* 2>&1) | tee ~/git.txt
cd /usr/src/freeswitch (./bootstrap.sh 2>&1) | tee ~/bootstrap.txt # same result if I add flag -j (./configure --enable-core-pgsql-support 2>&1) | tee ~/configure.txt (make install 2>&1) | tee ~/make-install.txt (make all cd-sounds-install cd-moh-install 2>&1) | tee ~make-sounds.txt
cd /usr/local/freeswitch/bin #./freeswitch
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Weird. Strace shows apparently missing library files. I won't post the full strace log here, but I can send it to whomever wants to look further into this. Did something change recently with the makefile and/or library locations? Here's the beginning: execve("./freeswitch", ["./freeswitch", "-nonat"], [/* 29 vars */]) = 0 brk(0) = 0x1519000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fdb61d7e000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/usr/local/freeswitch/lib/tls/x86_64/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) stat("/usr/local/freeswitch/lib/tls/x86_64", 0x7fff25c919f0) = -1 ENOENT (No such file or directory) open("/usr/local/freeswitch/lib/tls/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) stat("/usr/local/freeswitch/lib/tls", 0x7fff25c919f0) = -1 ENOENT (No such file or directory) open("/usr/local/freeswitch/lib/x86_64/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) stat("/usr/local/freeswitch/lib/x86_64", 0x7fff25c919f0) = -1 ENOENT (No such file or directory) open("/usr/local/freeswitch/lib/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) stat("/usr/local/freeswitch/lib", {st_mode=S_IFDIR|S_ISGID|0750, st_size=4096, ...}) = 0 open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=60104, ...}) = 0 mmap(NULL, 60104, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fdb61d6f000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/x86_64-linux-gnu/libm.so.6", O_RDONLY|O_CLOEXEC) = 3 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200U\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=1059248, ...}) = 0 On Mon, Jun 23, 2014 at 3:34 PM, Peter Villeneuve <petervnv1@gmail.com> wrote:
I don't think you're doing anything wrong at all. My installation was working fine until I decided to update. I also am running Debian 7 on Amd64 like you.
In fact I just did a make current and now I have the same problem you're referring. The freeswitch daemon now consumes around 95% of the CPU when starting and just sits there indefinitely.
I'm running strace now http://www.cyberciti.biz/tips/linux-strace-command-examples.html to see if I can figure out why the update seems to have broken my freeswitch install.
On Mon, Jun 23, 2014 at 5:39 AM, Craig Stevenson <craig@stevenson.com> wrote:
Hoping someone can help out a newbie figure out what I'm doing wrong. This is my first attempt at building and I keep running into same issue each time. Any pointers would be greatly appreciated.
My problem is that FreeSWITHC seems to just get stuck when I try to run the binary. And and if I execute with -ncwait optoin, it keeps spitting out a line saying that it is waiting for background process to be ready
This is what happens when I try to run the compiled system on a home ESXi server in my internal home network.
# ./freeswitch 2014-06-22 21:23:06.011792 [INFO] switch_event.c:670 Activate Eventing Engine. 2014-06-22 21:23:06.011947 [WARNING] switch_event.c:652 Create additional event dispatch thread 0 <and then just sits there.... >
BUILD VERSION: - Debian-7.5.0-amd64-netinst.iso - FreeSWITCH master (git:git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>)*
TEST MACHINE: ESXi 5.1 VM - Debian GNU/Linus 6 (64 bit) - 1 CPU - 1 GB RAM - 16GB Memory - 1 NIC = E1000
INSTALLATION STEPS with output piped through 'tee' to capture logs:
su (apt-get update 2>&1) | tee ~/apt-get-update.txt (apt-get upgrade 2>&1) | tee ~/apt-get-upgrade.txt (dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections.txt
(apt-get install autoconf automake devscripts gawk g++ git-core libjpeg-dev libncurses5-dev libtool make python-dev gawk pkg-config libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns.dev libpq-dev 2>&1) | tee ~/apt-get.txt
(dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections-after-apt-get.txt
cd /usr/src (git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>* 2>&1) | tee ~/git.txt
cd /usr/src/freeswitch (./bootstrap.sh 2>&1) | tee ~/bootstrap.txt # same result if I add flag -j (./configure --enable-core-pgsql-support 2>&1) | tee ~/configure.txt (make install 2>&1) | tee ~/make-install.txt (make all cd-sounds-install cd-moh-install 2>&1) | tee ~make-sounds.txt
cd /usr/local/freeswitch/bin #./freeswitch
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
It seems it gets stuck on a futex, which explains why it consumes 95% of the CPU and I eventually have to kill it. I believe others are seeing the same results, so this seems likely to be a bug that was recently introduced to git. futex(0x7fdb61cf6e6c, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x7fdb61cf6e68, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x7fdb61cf6ec0, FUTEX_WAKE_PRIVATE, 1) = 1 +++ killed by SIGKILL +++ On Mon, Jun 23, 2014 at 3:41 PM, Peter Villeneuve <petervnv1@gmail.com> wrote:
Weird. Strace shows apparently missing library files. I won't post the full strace log here, but I can send it to whomever wants to look further into this. Did something change recently with the makefile and/or library locations?
Here's the beginning:
execve("./freeswitch", ["./freeswitch", "-nonat"], [/* 29 vars */]) = 0 brk(0) = 0x1519000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fdb61d7e000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/usr/local/freeswitch/lib/tls/x86_64/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) stat("/usr/local/freeswitch/lib/tls/x86_64", 0x7fff25c919f0) = -1 ENOENT (No such file or directory) open("/usr/local/freeswitch/lib/tls/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) stat("/usr/local/freeswitch/lib/tls", 0x7fff25c919f0) = -1 ENOENT (No such file or directory) open("/usr/local/freeswitch/lib/x86_64/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) stat("/usr/local/freeswitch/lib/x86_64", 0x7fff25c919f0) = -1 ENOENT (No such file or directory) open("/usr/local/freeswitch/lib/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) stat("/usr/local/freeswitch/lib", {st_mode=S_IFDIR|S_ISGID|0750, st_size=4096, ...}) = 0 open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=60104, ...}) = 0 mmap(NULL, 60104, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fdb61d6f000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/x86_64-linux-gnu/libm.so.6", O_RDONLY|O_CLOEXEC) = 3 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200U\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=1059248, ...}) = 0
On Mon, Jun 23, 2014 at 3:34 PM, Peter Villeneuve <petervnv1@gmail.com> wrote:
I don't think you're doing anything wrong at all. My installation was working fine until I decided to update. I also am running Debian 7 on Amd64 like you.
In fact I just did a make current and now I have the same problem you're referring. The freeswitch daemon now consumes around 95% of the CPU when starting and just sits there indefinitely.
I'm running strace now http://www.cyberciti.biz/tips/linux-strace-command-examples.html to see if I can figure out why the update seems to have broken my freeswitch install.
On Mon, Jun 23, 2014 at 5:39 AM, Craig Stevenson <craig@stevenson.com> wrote:
Hoping someone can help out a newbie figure out what I'm doing wrong. This is my first attempt at building and I keep running into same issue each time. Any pointers would be greatly appreciated.
My problem is that FreeSWITHC seems to just get stuck when I try to run the binary. And and if I execute with -ncwait optoin, it keeps spitting out a line saying that it is waiting for background process to be ready
This is what happens when I try to run the compiled system on a home ESXi server in my internal home network.
# ./freeswitch 2014-06-22 21:23:06.011792 [INFO] switch_event.c:670 Activate Eventing Engine. 2014-06-22 21:23:06.011947 [WARNING] switch_event.c:652 Create additional event dispatch thread 0 <and then just sits there.... >
BUILD VERSION: - Debian-7.5.0-amd64-netinst.iso - FreeSWITCH master (git:git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>)*
TEST MACHINE: ESXi 5.1 VM - Debian GNU/Linus 6 (64 bit) - 1 CPU - 1 GB RAM - 16GB Memory - 1 NIC = E1000
INSTALLATION STEPS with output piped through 'tee' to capture logs:
su (apt-get update 2>&1) | tee ~/apt-get-update.txt (apt-get upgrade 2>&1) | tee ~/apt-get-upgrade.txt (dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections.txt
(apt-get install autoconf automake devscripts gawk g++ git-core libjpeg-dev libncurses5-dev libtool make python-dev gawk pkg-config libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns.dev libpq-dev 2>&1) | tee ~/apt-get.txt
(dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections-after-apt-get.txt
cd /usr/src (git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>* 2>&1) | tee ~/git.txt
cd /usr/src/freeswitch (./bootstrap.sh 2>&1) | tee ~/bootstrap.txt # same result if I add flag -j (./configure --enable-core-pgsql-support 2>&1) | tee ~/configure.txt (make install 2>&1) | tee ~/make-install.txt (make all cd-sounds-install cd-moh-install 2>&1) | tee ~make-sounds.txt
cd /usr/local/freeswitch/bin #./freeswitch
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Find me on Skype, I want to get Anthony into one of these systems so we can fix this ASAP. See below for contact details: -- Brian West brian@freeswitch.org Twitter: @FreeSWITCH , @briankwest http://www.freeswitchbook.com http://www.freeswitchcookbook.com T: +1.918.420.9001 | F: +1.918.420.9002 | M: +1.918.424.WEST iNUM: +883 5100 1420 9001 ISN: 410*543 Skype:briankwest PGP Key: http://www.bkw.org/key.txt (AB93356707C76CED) On Jun 23, 2014, at 10:10 AM, Peter Villeneuve <petervnv1@gmail.com> wrote:
It seems it gets stuck on a futex, which explains why it consumes 95% of the CPU and I eventually have to kill it. I believe others are seeing the same results, so this seems likely to be a bug that was recently introduced to git.
futex(0x7fdb61cf6e6c, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x7fdb61cf6e68, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x7fdb61cf6ec0, FUTEX_WAKE_PRIVATE, 1) = 1 +++ killed by SIGKILL +++
On Mon, Jun 23, 2014 at 3:41 PM, Peter Villeneuve <petervnv1@gmail.com> wrote: Weird. Strace shows apparently missing library files. I won't post the full strace log here, but I can send it to whomever wants to look further into this. Did something change recently with the makefile and/or library locations?
Here's the beginning:
execve("./freeswitch", ["./freeswitch", "-nonat"], [/* 29 vars */]) = 0 brk(0) = 0x1519000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fdb61d7e000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/usr/local/freeswitch/lib/tls/x86_64/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) stat("/usr/local/freeswitch/lib/tls/x86_64", 0x7fff25c919f0) = -1 ENOENT (No such file or directory) open("/usr/local/freeswitch/lib/tls/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) stat("/usr/local/freeswitch/lib/tls", 0x7fff25c919f0) = -1 ENOENT (No such file or directory) open("/usr/local/freeswitch/lib/x86_64/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) stat("/usr/local/freeswitch/lib/x86_64", 0x7fff25c919f0) = -1 ENOENT (No such file or directory) open("/usr/local/freeswitch/lib/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) stat("/usr/local/freeswitch/lib", {st_mode=S_IFDIR|S_ISGID|0750, st_size=4096, ...}) = 0 open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=60104, ...}) = 0 mmap(NULL, 60104, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fdb61d6f000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/x86_64-linux-gnu/libm.so.6", O_RDONLY|O_CLOEXEC) = 3 read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200U\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=1059248, ...}) = 0
On Mon, Jun 23, 2014 at 3:34 PM, Peter Villeneuve <petervnv1@gmail.com> wrote: I don't think you're doing anything wrong at all. My installation was working fine until I decided to update. I also am running Debian 7 on Amd64 like you.
In fact I just did a make current and now I have the same problem you're referring. The freeswitch daemon now consumes around 95% of the CPU when starting and just sits there indefinitely.
I'm running strace now http://www.cyberciti.biz/tips/linux-strace-command-examples.html to see if I can figure out why the update seems to have broken my freeswitch install.
On Mon, Jun 23, 2014 at 5:39 AM, Craig Stevenson <craig@stevenson.com> wrote:
Hoping someone can help out a newbie figure out what I'm doing wrong. This is my first attempt at building and I keep running into same issue each time. Any pointers would be greatly appreciated.
My problem is that FreeSWITHC seems to just get stuck when I try to run the binary. And and if I execute with -ncwait optoin, it keeps spitting out a line saying that it is waiting for background process to be ready
This is what happens when I try to run the compiled system on a home ESXi server in my internal home network.
# ./freeswitch 2014-06-22 21:23:06.011792 [INFO] switch_event.c:670 Activate Eventing Engine. 2014-06-22 21:23:06.011947 [WARNING] switch_event.c:652 Create additional event dispatch thread 0 <and then just sits there.... >
BUILD VERSION: - Debian-7.5.0-amd64-netinst.iso - FreeSWITCH master (git:git clone git://git.freeswitch.org/freeswitch.git)
TEST MACHINE: ESXi 5.1 VM - Debian GNU/Linus 6 (64 bit) - 1 CPU - 1 GB RAM - 16GB Memory - 1 NIC = E1000
INSTALLATION STEPS with output piped through 'tee' to capture logs:
su (apt-get update 2>&1) | tee ~/apt-get-update.txt (apt-get upgrade 2>&1) | tee ~/apt-get-upgrade.txt (dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections.txt
(apt-get install autoconf automake devscripts gawk g++ git-core libjpeg-dev libncurses5-dev libtool make python-dev gawk pkg-config libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns.dev libpq-dev 2>&1) | tee ~/apt-get.txt
(dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections-after-apt-get.txt
cd /usr/src (git clone git://git.freeswitch.org/freeswitch.git 2>&1) | tee ~/git.txt
cd /usr/src/freeswitch (./bootstrap.sh 2>&1) | tee ~/bootstrap.txt # same result if I add flag -j (./configure --enable-core-pgsql-support 2>&1) | tee ~/configure.txt (make install 2>&1) | tee ~/make-install.txt (make all cd-sounds-install cd-moh-install 2>&1) | tee ~make-sounds.txt
cd /usr/local/freeswitch/bin #./freeswitch
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Peter, Thanks. I also saw the symptom of the process consuming massive (nearly 100%) of processor and it continued to consume until killing the process. -- Craig On Mon, Jun 23, 2014 at 7:34 AM, Peter Villeneuve <petervnv1@gmail.com> wrote:
I don't think you're doing anything wrong at all. My installation was working fine until I decided to update. I also am running Debian 7 on Amd64 like you.
In fact I just did a make current and now I have the same problem you're referring. The freeswitch daemon now consumes around 95% of the CPU when starting and just sits there indefinitely.
I'm running strace now http://www.cyberciti.biz/tips/linux-strace-command-examples.html to see if I can figure out why the update seems to have broken my freeswitch install.
On Mon, Jun 23, 2014 at 5:39 AM, Craig Stevenson <craig@stevenson.com> wrote:
Hoping someone can help out a newbie figure out what I'm doing wrong. This is my first attempt at building and I keep running into same issue each time. Any pointers would be greatly appreciated.
My problem is that FreeSWITHC seems to just get stuck when I try to run the binary. And and if I execute with -ncwait optoin, it keeps spitting out a line saying that it is waiting for background process to be ready
This is what happens when I try to run the compiled system on a home ESXi server in my internal home network.
# ./freeswitch 2014-06-22 21:23:06.011792 [INFO] switch_event.c:670 Activate Eventing Engine. 2014-06-22 21:23:06.011947 [WARNING] switch_event.c:652 Create additional event dispatch thread 0 <and then just sits there.... >
BUILD VERSION: - Debian-7.5.0-amd64-netinst.iso - FreeSWITCH master (git:git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>)*
TEST MACHINE: ESXi 5.1 VM - Debian GNU/Linus 6 (64 bit) - 1 CPU - 1 GB RAM - 16GB Memory - 1 NIC = E1000
INSTALLATION STEPS with output piped through 'tee' to capture logs:
su (apt-get update 2>&1) | tee ~/apt-get-update.txt (apt-get upgrade 2>&1) | tee ~/apt-get-upgrade.txt (dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections.txt
(apt-get install autoconf automake devscripts gawk g++ git-core libjpeg-dev libncurses5-dev libtool make python-dev gawk pkg-config libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns.dev libpq-dev 2>&1) | tee ~/apt-get.txt
(dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections-after-apt-get.txt
cd /usr/src (git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>* 2>&1) | tee ~/git.txt
cd /usr/src/freeswitch (./bootstrap.sh 2>&1) | tee ~/bootstrap.txt # same result if I add flag -j (./configure --enable-core-pgsql-support 2>&1) | tee ~/configure.txt (make install 2>&1) | tee ~/make-install.txt (make all cd-sounds-install cd-moh-install 2>&1) | tee ~make-sounds.txt
cd /usr/local/freeswitch/bin #./freeswitch
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
@Craig No problem. Brian, was that skype message intended for me? On Mon, Jun 23, 2014 at 4:02 PM, Craig Stevenson <craig@stevenson.com> wrote:
Peter,
Thanks. I also saw the symptom of the process consuming massive (nearly 100%) of processor and it continued to consume until killing the process.
-- Craig
On Mon, Jun 23, 2014 at 7:34 AM, Peter Villeneuve <petervnv1@gmail.com> wrote:
I don't think you're doing anything wrong at all. My installation was working fine until I decided to update. I also am running Debian 7 on Amd64 like you.
In fact I just did a make current and now I have the same problem you're referring. The freeswitch daemon now consumes around 95% of the CPU when starting and just sits there indefinitely.
I'm running strace now http://www.cyberciti.biz/tips/linux-strace-command-examples.html to see if I can figure out why the update seems to have broken my freeswitch install.
On Mon, Jun 23, 2014 at 5:39 AM, Craig Stevenson <craig@stevenson.com> wrote:
Hoping someone can help out a newbie figure out what I'm doing wrong. This is my first attempt at building and I keep running into same issue each time. Any pointers would be greatly appreciated.
My problem is that FreeSWITHC seems to just get stuck when I try to run the binary. And and if I execute with -ncwait optoin, it keeps spitting out a line saying that it is waiting for background process to be ready
This is what happens when I try to run the compiled system on a home ESXi server in my internal home network.
# ./freeswitch 2014-06-22 21:23:06.011792 [INFO] switch_event.c:670 Activate Eventing Engine. 2014-06-22 21:23:06.011947 [WARNING] switch_event.c:652 Create additional event dispatch thread 0 <and then just sits there.... >
BUILD VERSION: - Debian-7.5.0-amd64-netinst.iso - FreeSWITCH master (git:git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>)*
TEST MACHINE: ESXi 5.1 VM - Debian GNU/Linus 6 (64 bit) - 1 CPU - 1 GB RAM - 16GB Memory - 1 NIC = E1000
INSTALLATION STEPS with output piped through 'tee' to capture logs:
su (apt-get update 2>&1) | tee ~/apt-get-update.txt (apt-get upgrade 2>&1) | tee ~/apt-get-upgrade.txt (dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections.txt
(apt-get install autoconf automake devscripts gawk g++ git-core libjpeg-dev libncurses5-dev libtool make python-dev gawk pkg-config libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns.dev libpq-dev 2>&1) | tee ~/apt-get.txt
(dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections-after-apt-get.txt
cd /usr/src (git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>* 2>&1) | tee ~/git.txt
cd /usr/src/freeswitch (./bootstrap.sh 2>&1) | tee ~/bootstrap.txt # same result if I add flag -j (./configure --enable-core-pgsql-support 2>&1) | tee ~/configure.txt (make install 2>&1) | tee ~/make-install.txt (make all cd-sounds-install cd-moh-install 2>&1) | tee ~make-sounds.txt
cd /usr/local/freeswitch/bin #./freeswitch
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Was this ever resolved? I've just installed and am experiencing similar behavior when I try to start it as a service. When started from the command line, it behaves. On Mon, Jun 23, 2014 at 9:01 AM, Peter Villeneuve <petervnv1@gmail.com> wrote:
@Craig No problem.
Brian, was that skype message intended for me?
On Mon, Jun 23, 2014 at 4:02 PM, Craig Stevenson <craig@stevenson.com> wrote:
Peter,
Thanks. I also saw the symptom of the process consuming massive (nearly 100%) of processor and it continued to consume until killing the process.
-- Craig
On Mon, Jun 23, 2014 at 7:34 AM, Peter Villeneuve <petervnv1@gmail.com> wrote:
I don't think you're doing anything wrong at all. My installation was working fine until I decided to update. I also am running Debian 7 on Amd64 like you.
In fact I just did a make current and now I have the same problem you're referring. The freeswitch daemon now consumes around 95% of the CPU when starting and just sits there indefinitely.
I'm running strace now http://www.cyberciti.biz/tips/linux-strace-command-examples.html to see if I can figure out why the update seems to have broken my freeswitch install.
On Mon, Jun 23, 2014 at 5:39 AM, Craig Stevenson <craig@stevenson.com> wrote:
Hoping someone can help out a newbie figure out what I'm doing wrong. This is my first attempt at building and I keep running into same issue each time. Any pointers would be greatly appreciated.
My problem is that FreeSWITHC seems to just get stuck when I try to run the binary. And and if I execute with -ncwait optoin, it keeps spitting out a line saying that it is waiting for background process to be ready
This is what happens when I try to run the compiled system on a home ESXi server in my internal home network.
# ./freeswitch 2014-06-22 21:23:06.011792 [INFO] switch_event.c:670 Activate Eventing Engine. 2014-06-22 21:23:06.011947 [WARNING] switch_event.c:652 Create additional event dispatch thread 0 <and then just sits there.... >
BUILD VERSION: - Debian-7.5.0-amd64-netinst.iso - FreeSWITCH master (git:git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>)*
TEST MACHINE: ESXi 5.1 VM - Debian GNU/Linus 6 (64 bit) - 1 CPU - 1 GB RAM - 16GB Memory - 1 NIC = E1000
INSTALLATION STEPS with output piped through 'tee' to capture logs:
su (apt-get update 2>&1) | tee ~/apt-get-update.txt (apt-get upgrade 2>&1) | tee ~/apt-get-upgrade.txt (dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections.txt
(apt-get install autoconf automake devscripts gawk g++ git-core libjpeg-dev libncurses5-dev libtool make python-dev gawk pkg-config libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns.dev libpq-dev 2>&1) | tee ~/apt-get.txt
(dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections-after-apt-get.txt
cd /usr/src (git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>* 2>&1) | tee ~/git.txt
cd /usr/src/freeswitch (./bootstrap.sh 2>&1) | tee ~/bootstrap.txt # same result if I add flag -j (./configure --enable-core-pgsql-support 2>&1) | tee ~/configure.txt (make install 2>&1) | tee ~/make-install.txt (make all cd-sounds-install cd-moh-install 2>&1) | tee ~make-sounds.txt
cd /usr/local/freeswitch/bin #./freeswitch
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
There was a similar chat Friday on IRC with some users running on low resources virtual machines. I believe they narrowed it down to starting freeswitch with –rp option, I believe Tony fixed the default config not to use that option. Thanks, Moishe Grunstein Tornado Computer Systems, Inc. 212.400.7650 888.IPPBX.US Service Request Email: support@nysolutions.com<mailto:support@nysolutions.com> Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified [cid:image001.jpg@01C72F94.9EE45D60]<http://www.nysolutions.com/> Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Craig Stevenson Sent: Monday, June 23, 2014 12:39 AM To: FreeSWITCH-users@lists.freeswitch.org Subject: [Freeswitch-users] newbie question (first build): FreeSWITCH just "hangs" when I run it Hoping someone can help out a newbie figure out what I'm doing wrong. This is my first attempt at building and I keep running into same issue each time. Any pointers would be greatly appreciated. My problem is that FreeSWITHC seems to just get stuck when I try to run the binary. And and if I execute with -ncwait optoin, it keeps spitting out a line saying that it is waiting for background process to be ready This is what happens when I try to run the compiled system on a home ESXi server in my internal home network. # ./freeswitch 2014-06-22 21:23:06.011792 [INFO] switch_event.c:670 Activate Eventing Engine. 2014-06-22 21:23:06.011947 [WARNING] switch_event.c:652 Create additional event dispatch thread 0 <and then just sits there.... > BUILD VERSION: - Debian-7.5.0-amd64-netinst.iso - FreeSWITCH master (git:git clone git://git.freeswitch.org/freeswitch.git<http://freeswitch.org/freeswitch.git>) TEST MACHINE: ESXi 5.1 VM - Debian GNU/Linus 6 (64 bit) - 1 CPU - 1 GB RAM - 16GB Memory - 1 NIC = E1000 INSTALLATION STEPS with output piped through 'tee' to capture logs: su (apt-get update 2>&1) | tee ~/apt-get-update.txt (apt-get upgrade 2>&1) | tee ~/apt-get-upgrade.txt (dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections.txt (apt-get install autoconf automake devscripts gawk g++ git-core libjpeg-dev libncurses5-dev libtool make python-dev gawk pkg-config libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns.dev libpq-dev 2>&1) | tee ~/apt-get.txt (dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections-after-apt-get.txt cd /usr/src (git clone git://git.freeswitch.org/freeswitch.git<http://freeswitch.org/freeswitch.git> 2>&1) | tee ~/git.txt cd /usr/src/freeswitch (./bootstrap.sh 2>&1) | tee ~/bootstrap.txt # same result if I add flag -j (./configure --enable-core-pgsql-support 2>&1) | tee ~/configure.txt (make install 2>&1) | tee ~/make-install.txt (make all cd-sounds-install cd-moh-install 2>&1) | tee ~make-sounds.txt cd /usr/local/freeswitch/bin #./freeswitch
I don't think that's it. I just tried with -rp and problem remains. execve("./freeswitch", ["./freeswitch", "-nonat", "-rp"], [/* 29 vars */]) = 0 ........................................... futex(0x7f204a884e6c, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x7f204a884e68, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x7f204a884ec0, FUTEX_WAKE_PRIVATE, 1) = 1 +++ killed by SIGKILL +++ On Mon, Jun 23, 2014 at 4:17 PM, Moishe Grunstein <max@nysolutions.com> wrote:
There was a similar chat Friday on IRC with some users running on low resources virtual machines.
I believe they narrowed it down to starting freeswitch with –rp option, I believe Tony fixed the default config not to use that option.
Thanks,
Moishe Grunstein
Tornado Computer Systems, Inc.
212.400.7650 888.IPPBX.US *Service Request Email: support@nysolutions.com <support@nysolutions.com> *
Polycom Certified VAR Microsoft Small Business Specialist, Cisco SMB Select Certified
[image: cid:image001.jpg@01C72F94.9EE45D60] <http://www.nysolutions.com/>
Computer Networking * Managed Services * IP Video Surveillance * Network Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network Security * Site Surveys * CMS
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Craig Stevenson *Sent:* Monday, June 23, 2014 12:39 AM *To:* FreeSWITCH-users@lists.freeswitch.org *Subject:* [Freeswitch-users] newbie question (first build): FreeSWITCH just "hangs" when I run it
Hoping someone can help out a newbie figure out what I'm doing wrong. This is my first attempt at building and I keep running into same issue each time. Any pointers would be greatly appreciated.
My problem is that FreeSWITHC seems to just get stuck when I try to run the binary. And and if I execute with -ncwait optoin, it keeps spitting out a line saying that it is waiting for background process to be ready
This is what happens when I try to run the compiled system on a home ESXi server in my internal home network.
# ./freeswitch
2014-06-22 21:23:06.011792 [INFO] switch_event.c:670 Activate Eventing Engine.
2014-06-22 21:23:06.011947 [WARNING] switch_event.c:652 Create additional event dispatch thread 0
<and then just sits there.... >
BUILD VERSION:
- Debian-7.5.0-amd64-netinst.iso
- FreeSWITCH master (git:git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>)*
TEST MACHINE: ESXi 5.1 VM
- Debian GNU/Linus 6 (64 bit)
- 1 CPU
- 1 GB RAM
- 16GB Memory
- 1 NIC = E1000
INSTALLATION STEPS with output piped through 'tee' to capture logs:
su
(apt-get update 2>&1) | tee ~/apt-get-update.txt (apt-get upgrade 2>&1) | tee ~/apt-get-upgrade.txt (dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections.txt
(apt-get install autoconf automake devscripts gawk g++ git-core libjpeg-dev libncurses5-dev libtool make python-dev gawk pkg-config libtiff5-dev libperl-dev libgdbm-dev libdb-dev gettext libssl-dev libcurl4-openssl-dev libpcre3-dev libspeex-dev libspeexdsp-dev libsqlite3-dev libedit-dev libldns.dev libpq-dev 2>&1) | tee ~/apt-get.txt
(dpkg --get-selections 2>&1) | tee ~/dpkg-get-selections-after-apt-get.txt
cd /usr/src (git clone git://git.*freeswitch.org/freeswitch.git <http://freeswitch.org/freeswitch.git>* 2>&1) | tee ~/git.txt
cd /usr/src/freeswitch (./bootstrap.sh 2>&1) | tee ~/bootstrap.txt # same result if I add flag -j (./configure --enable-core-pgsql-support 2>&1) | tee ~/configure.txt (make install 2>&1) | tee ~/make-install.txt (make all cd-sounds-install cd-moh-install 2>&1) | tee ~make-sounds.txt
cd /usr/local/freeswitch/bin #./freeswitch
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (5)
-
Brian West
-
Craig Stevenson
-
Moishe Grunstein
-
Peter Villeneuve
-
Tom Lynn