Hello All, I have built freeswitch on a Virtual Ubuntu machine (6.06), and have deployed the same on a real Ubuntu hardware. When I run freeswitch on this box, I get the following messages: . . 2013-03-08 17:30:42.719156 [CONSOLE] switch_time.c:1315 Calibrating timer, please wait... . . 2013-03-08 17:30:47.959110 [CONSOLE] switch_time.c:250 Test: 1000 Average: 997 Step: 1 2013-03-08 17:30:48.058960 [CONSOLE] switch_time.c:250 Test: 1001 Average: 1996 Step: 1 2013-03-08 17:30:48.108886 [CONSOLE] switch_time.c:250 Test: 1000 Average: 997 Step: 1 2013-03-08 17:30:48.240704 [CONSOLE] switch_time.c:250 Test: 1001 Average: 2635 Step: 1 Do you have your kernel timer frequency set to lower than 1,000Hz? You may experience audio problems . . I am yet to test the audio (will take some time before other hardware is setup), but just wanted to know if my approach alright? Should I be worried about these logs? Thanks!
If you are really running Ubuntu 6.06 then you need to upgrade. That version is coming up on 7 years old. William King Senior Engineer Quentus Technologies, INC 1037 NE 65th St Suite 273 Seattle, WA 98115 Main: (877) 211-9337 Office: (206) 388-4772 Cell: (253) 686-5518 william.king@quentustech.com On 03/07/2013 10:37 PM, Siri MM wrote:
Hello All,
I have built freeswitch on a Virtual Ubuntu machine (6.06), and have deployed the same on a real Ubuntu hardware. When I run freeswitch on this box, I get the following messages:
. . 2013-03-08 17:30:42.719156 [CONSOLE] switch_time.c:1315 Calibrating timer, please wait... . . 2013-03-08 17:30:47.959110 [CONSOLE] switch_time.c:250 Test: 1000 Average: 997 Step: 1 2013-03-08 17:30:48.058960 [CONSOLE] switch_time.c:250 Test: 1001 Average: 1996 Step: 1 2013-03-08 17:30:48.108886 [CONSOLE] switch_time.c:250 Test: 1000 Average: 997 Step: 1 2013-03-08 17:30:48.240704 [CONSOLE] switch_time.c:250 Test: 1001 Average: 2635 Step: 1 Do you have your kernel timer frequency set to lower than 1,000Hz? You may experience audio problems . .
I am yet to test the audio (will take some time before other hardware is setup), but just wanted to know if my approach alright? Should I be worried about these logs?
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Also not to mention that the 3.2 series in 12.04 LTS has native support for timerfd. -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of William King Sent: Friday, March 8, 2013 10:13 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Abnormally large timer gap ... If you are really running Ubuntu 6.06 then you need to upgrade. That version is coming up on 7 years old. William King Senior Engineer Quentus Technologies, INC 1037 NE 65th St Suite 273 Seattle, WA 98115 Main: (877) 211-9337 Office: (206) 388-4772 Cell: (253) 686-5518 william.king@quentustech.com On 03/07/2013 10:37 PM, Siri MM wrote:
Hello All,
I have built freeswitch on a Virtual Ubuntu machine (6.06), and have deployed the same on a real Ubuntu hardware. When I run freeswitch on this box, I get the following messages:
. . 2013-03-08 17:30:42.719156 [CONSOLE] switch_time.c:1315 Calibrating timer, please wait... . . 2013-03-08 17:30:47.959110 [CONSOLE] switch_time.c:250 Test: 1000 Average: 997 Step: 1 2013-03-08 17:30:48.058960 [CONSOLE] switch_time.c:250 Test: 1001 Average: 1996 Step: 1 2013-03-08 17:30:48.108886 [CONSOLE] switch_time.c:250 Test: 1000 Average: 997 Step: 1 2013-03-08 17:30:48.240704 [CONSOLE] switch_time.c:250 Test: 1001 Average: 2635 Step: 1 Do you have your kernel timer frequency set to lower than 1,000Hz? You may experience audio problems . .
I am yet to test the audio (will take some time before other hardware is setup), but just wanted to know if my approach alright? Should I be worried about these logs?
Thanks!
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Jeff Leung
-
Siri MM
-
William King