Unfortunately, it isn't well documented, or else I would not ask about :)))))) Those parameters perhaps are exclusive of each other, by mechanics they affects to is almost the same. Or at least, I would call them two sides of ame thing. Theoretically, if you consider the situation of bypass_media=true, that means media flow bypass around Freeswitch, it also automatically annihilates settings of proxy_media variable. It doesn't matter, even you would set proxy_media=true for same channel, it should not provide you "light proxy" of media flow, because your settign of bypass_proxy comprises Freeswitch don't proxy media. Thus I guess in order to set "light" or "hard" proxy the variable bypass_media must be set to FALSE first, for same channel of course. My task requires either bypass media or light/hard proxy to be set for a channel depending of some conditions of a session. In the other words, I need to set up one of three modes per each channel. Perhaps I undestand something not so right - I will appreciate if you will correct me with the following: 1. Default (full media proxy) : bypass_media=false ; proxy_media=false 2. Transparent proxy (mine "light proxy"): bypass_media=false; proxy_media=true 3. Bypass media: bupass_media=true (it's doesn't matter what currect value of proxy_media is) Thanks Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com ----- Исходное сообщение ----- От: "Ken Rice" <krice@freeswitch.org> Кому: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Отправленные: Пятница, 2 Ноябрь 2012 г 17:12:11 GMT +02:00 Афины, Бухарест, Стамбул Тема: Re: [Freeswitch-users] media proxy Default, proxy and bybass media are exclusive of each other, you can not combine them on a single call... Proxy media is just that proxy the media Bypass media is just that, bypass freeswitch and send the media direct between the end point... Setting this options is fairly well documented on the wiki... On 11/2/12 9:13 AM, "Max Kovalenko" <mkovalenko@cybervisiontech.com> wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to bridge legs?
Waiting for your replay ASAP. Thank you in advance.
Best Regards.
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Can you point to other software that provides this distinction in media proxying? Regards, Ben Langfeld On 4 November 2012 11:57, Max Kovalenko <mkovalenko@cybervisiontech.com>wrote:
Unfortunately, it isn't well documented, or else I would not ask about :))))))
Those parameters perhaps are exclusive of each other, by mechanics they affects to is almost the same. Or at least, I would call them two sides of ame thing.
Theoretically, if you consider the situation of bypass_media=true, that means media flow bypass around Freeswitch, it also automatically annihilates settings of proxy_media variable. It doesn't matter, even you would set proxy_media=true for same channel, it should not provide you "light proxy" of media flow, because your settign of bypass_proxy comprises Freeswitch don't proxy media. Thus I guess in order to set "light" or "hard" proxy the variable bypass_media must be set to FALSE first, for same channel of course.
My task requires either bypass media or light/hard proxy to be set for a channel depending of some conditions of a session. In the other words, I need to set up one of three modes per each channel.
Perhaps I undestand something not so right - I will appreciate if you will correct me with the following:
1. Default (full media proxy) : bypass_media=false ; proxy_media=false
2. Transparent proxy (mine "light proxy"): bypass_media=false; proxy_media=true
3. Bypass media: bupass_media=true (it's doesn't matter what currect value of proxy_media is)
Thanks
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
----- Исходное сообщение ----- От: "Ken Rice" <krice@freeswitch.org> Кому: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Отправленные: Пятница, 2 Ноябрь 2012 г 17:12:11 GMT +02:00 Афины, Бухарест, Стамбул Тема: Re: [Freeswitch-users] media proxy
Default, proxy and bybass media are exclusive of each other, you can not combine them on a single call...
Proxy media is just that proxy the media
Bypass media is just that, bypass freeswitch and send the media direct between the end point...
Setting this options is fairly well documented on the wiki...
On 11/2/12 9:13 AM, "Max Kovalenko" <mkovalenko@cybervisiontech.com> wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to bridge legs?
Waiting for your replay ASAP. Thank you in advance.
Best Regards.
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I'm getting the data from external DB containing subscribers' parameters. Max Kovalenko --------------- CyberVision Inc. ----- Original Message ----- From: "Ben Langfeld" <ben@langfeld.co.uk> To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Sent: Sunday, November 4, 2012 10:46:00 PM Subject: Re: [Freeswitch-users] media proxy Can you point to other software that provides this distinction in media proxying? Regards, Ben Langfeld On 4 November 2012 11:57, Max Kovalenko < mkovalenko@cybervisiontech.com > wrote: Unfortunately, it isn't well documented, or else I would not ask about :)))))) Those parameters perhaps are exclusive of each other, by mechanics they affects to is almost the same. Or at least, I would call them two sides of ame thing. Theoretically, if you consider the situation of bypass_media=true, that means media flow bypass around Freeswitch, it also automatically annihilates settings of proxy_media variable. It doesn't matter, even you would set proxy_media=true for same channel, it should not provide you "light proxy" of media flow, because your settign of bypass_proxy comprises Freeswitch don't proxy media. Thus I guess in order to set "light" or "hard" proxy the variable bypass_media must be set to FALSE first, for same channel of course. My task requires either bypass media or light/hard proxy to be set for a channel depending of some conditions of a session. In the other words, I need to set up one of three modes per each channel. Perhaps I undestand something not so right - I will appreciate if you will correct me with the following: 1. Default (full media proxy) : bypass_media=false ; proxy_media=false 2. Transparent proxy (mine "light proxy"): bypass_media=false; proxy_media=true 3. Bypass media: bupass_media=true (it's doesn't matter what currect value of proxy_media is) Thanks Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com ----- Исходное сообщение ----- От: "Ken Rice" < krice@freeswitch.org > Кому: "FreeSWITCH Users Help" < freeswitch-users@lists.freeswitch.org > Отправленные: Пятница, 2 Ноябрь 2012 г 17:12:11 GMT +02:00 Афины, Бухарест, Стамбул Тема: Re: [Freeswitch-users] media proxy Default, proxy and bybass media are exclusive of each other, you can not combine them on a single call... Proxy media is just that proxy the media Bypass media is just that, bypass freeswitch and send the media direct between the end point... Setting this options is fairly well documented on the wiki... On 11/2/12 9:13 AM, "Max Kovalenko" < mkovalenko@cybervisiontech.com > wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to bridge legs?
Waiting for your replay ASAP. Thank you in advance.
Best Regards.
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Media proxy mode not only affects codecs, but any parameters negotiated by SDP. We use media proxy to handle NAT and still allow untouched SDP exchange between customer endpoints and PSTN gateway for T38, for example 2012/11/6 Max Kovalenko <mkovalenko@cybervisiontech.com>
I'm getting the data from external DB containing subscribers' parameters.
Max Kovalenko --------------- CyberVision Inc.
----- Original Message ----- From: "Ben Langfeld" <ben@langfeld.co.uk> To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Sent: Sunday, November 4, 2012 10:46:00 PM Subject: Re: [Freeswitch-users] media proxy
Can you point to other software that provides this distinction in media proxying?
Regards, Ben Langfeld
On 4 November 2012 11:57, Max Kovalenko < mkovalenko@cybervisiontech.com> wrote:
Unfortunately, it isn't well documented, or else I would not ask about :))))))
Those parameters perhaps are exclusive of each other, by mechanics they affects to is almost the same. Or at least, I would call them two sides of ame thing.
Theoretically, if you consider the situation of bypass_media=true, that means media flow bypass around Freeswitch, it also automatically annihilates settings of proxy_media variable. It doesn't matter, even you would set proxy_media=true for same channel, it should not provide you "light proxy" of media flow, because your settign of bypass_proxy comprises Freeswitch don't proxy media. Thus I guess in order to set "light" or "hard" proxy the variable bypass_media must be set to FALSE first, for same channel of course.
My task requires either bypass media or light/hard proxy to be set for a channel depending of some conditions of a session. In the other words, I need to set up one of three modes per each channel.
Perhaps I undestand something not so right - I will appreciate if you will correct me with the following:
1. Default (full media proxy) : bypass_media=false ; proxy_media=false
2. Transparent proxy (mine "light proxy"): bypass_media=false; proxy_media=true
3. Bypass media: bupass_media=true (it's doesn't matter what currect value of proxy_media is)
Thanks
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
----- Исходное сообщение ----- От: "Ken Rice" < krice@freeswitch.org > Кому: "FreeSWITCH Users Help" < freeswitch-users@lists.freeswitch.org > Отправленные: Пятница, 2 Ноябрь 2012 г 17:12:11 GMT +02:00 Афины, Бухарест, Стамбул Тема: Re: [Freeswitch-users] media proxy
Default, proxy and bybass media are exclusive of each other, you can not combine them on a single call...
Proxy media is just that proxy the media
Bypass media is just that, bypass freeswitch and send the media direct between the end point...
Setting this options is fairly well documented on the wiki...
On 11/2/12 9:13 AM, "Max Kovalenko" < mkovalenko@cybervisiontech.com > wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to bridge legs?
Waiting for your replay ASAP. Thank you in advance.
Best Regards.
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Best regards, Dmitry Sytchev, IT Engineer
Lets return to root direction of the topic. How to set Full media proxy mode per channel? Meaning, what values should be set for channel variables: bypass_media & proxy_media ? Max Kovalenko --------------- CyberVision Inc. ----- Original Message ----- From: "Dmitry Sytchev" <kbdfck@gmail.com> To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 6, 2012 9:01:59 PM Subject: Re: [Freeswitch-users] media proxy Media proxy mode not only affects codecs, but any parameters negotiated by SDP. We use media proxy to handle NAT and still allow untouched SDP exchange between customer endpoints and PSTN gateway for T38, for example 2012/11/6 Max Kovalenko < mkovalenko@cybervisiontech.com > I'm getting the data from external DB containing subscribers' parameters. Max Kovalenko --------------- CyberVision Inc. ----- Original Message ----- From: "Ben Langfeld" < ben@langfeld.co.uk > To: "FreeSWITCH Users Help" < freeswitch-users@lists.freeswitch.org > Sent: Sunday, November 4, 2012 10:46:00 PM Subject: Re: [Freeswitch-users] media proxy Can you point to other software that provides this distinction in media proxying? Regards, Ben Langfeld On 4 November 2012 11:57, Max Kovalenko < mkovalenko@cybervisiontech.com > wrote: Unfortunately, it isn't well documented, or else I would not ask about :)))))) Those parameters perhaps are exclusive of each other, by mechanics they affects to is almost the same. Or at least, I would call them two sides of ame thing. Theoretically, if you consider the situation of bypass_media=true, that means media flow bypass around Freeswitch, it also automatically annihilates settings of proxy_media variable. It doesn't matter, even you would set proxy_media=true for same channel, it should not provide you "light proxy" of media flow, because your settign of bypass_proxy comprises Freeswitch don't proxy media. Thus I guess in order to set "light" or "hard" proxy the variable bypass_media must be set to FALSE first, for same channel of course. My task requires either bypass media or light/hard proxy to be set for a channel depending of some conditions of a session. In the other words, I need to set up one of three modes per each channel. Perhaps I undestand something not so right - I will appreciate if you will correct me with the following: 1. Default (full media proxy) : bypass_media=false ; proxy_media=false 2. Transparent proxy (mine "light proxy"): bypass_media=false; proxy_media=true 3. Bypass media: bupass_media=true (it's doesn't matter what currect value of proxy_media is) Thanks Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com ----- Исходное сообщение ----- От: "Ken Rice" < krice@freeswitch.org > Кому: "FreeSWITCH Users Help" < freeswitch-users@lists.freeswitch.org > Отправленные: Пятница, 2 Ноябрь 2012 г 17:12:11 GMT +02:00 Афины, Бухарест, Стамбул Тема: Re: [Freeswitch-users] media proxy Default, proxy and bybass media are exclusive of each other, you can not combine them on a single call... Proxy media is just that proxy the media Bypass media is just that, bypass freeswitch and send the media direct between the end point... Setting this options is fairly well documented on the wiki... On 11/2/12 9:13 AM, "Max Kovalenko" < mkovalenko@cybervisiontech.com > wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to bridge legs?
Waiting for your replay ASAP. Thank you in advance.
Best Regards.
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Best regards, Dmitry Sytchev, IT Engineer _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Set bypass_media=true and do not set proxy_media variable. On Wednesday 07 November 2012 03:47:19 Max Kovalenko wrote:
Lets return to root direction of the topic.
How to set Full media proxy mode per channel?
Meaning, what values should be set for channel variables: bypass_media & proxy_media ?
Max Kovalenko --------------- CyberVision Inc.
----- Original Message ----- From: "Dmitry Sytchev" <kbdfck@gmail.com> To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 6, 2012 9:01:59 PM Subject: Re: [Freeswitch-users] media proxy
Media proxy mode not only affects codecs, but any parameters negotiated by SDP. We use media proxy to handle NAT and still allow untouched SDP exchange between customer endpoints and PSTN gateway for T38, for example
2012/11/6 Max Kovalenko < mkovalenko@cybervisiontech.com >
I'm getting the data from external DB containing subscribers' parameters.
Max Kovalenko --------------- CyberVision Inc.
----- Original Message ----- From: "Ben Langfeld" < ben@langfeld.co.uk > To: "FreeSWITCH Users Help" < freeswitch-users@lists.freeswitch.org > Sent: Sunday, November 4, 2012 10:46:00 PM Subject: Re: [Freeswitch-users] media proxy
Can you point to other software that provides this distinction in media proxying?
Regards, Ben Langfeld
On 4 November 2012 11:57, Max Kovalenko < mkovalenko@cybervisiontech.com > wrote:
Unfortunately, it isn't well documented, or else I would not ask about :))))))
Those parameters perhaps are exclusive of each other, by mechanics they affects to is almost the same. Or at least, I would call them two sides of ame thing.
Theoretically, if you consider the situation of bypass_media=true, that means media flow bypass around Freeswitch, it also automatically annihilates settings of proxy_media variable. It doesn't matter, even you would set proxy_media=true for same channel, it should not provide you "light proxy" of media flow, because your settign of bypass_proxy comprises Freeswitch don't proxy media. Thus I guess in order to set "light" or "hard" proxy the variable bypass_media must be set to FALSE first, for same channel of course.
My task requires either bypass media or light/hard proxy to be set for a channel depending of some conditions of a session. In the other words, I need to set up one of three modes per each channel.
Perhaps I undestand something not so right - I will appreciate if you will correct me with the following:
1. Default (full media proxy) : bypass_media=false ; proxy_media=false
2. Transparent proxy (mine "light proxy"): bypass_media=false; proxy_media=true
3. Bypass media: bupass_media=true (it's doesn't matter what currect value of proxy_media is)
Thanks
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
----- Исходное сообщение ----- От: "Ken Rice" < krice@freeswitch.org > Кому: "FreeSWITCH Users Help" < freeswitch-users@lists.freeswitch.org > Отправленные: Пятница, 2 Ноябрь 2012 г 17:12:11 GMT +02:00 Афины, Бухарест, Стамбул Тема: Re: [Freeswitch-users] media proxy
Default, proxy and bybass media are exclusive of each other, you can not combine them on a single call...
Proxy media is just that proxy the media
Bypass media is just that, bypass freeswitch and send the media direct between the end point...
Setting this options is fairly well documented on the wiki...
On 11/2/12 9:13 AM, "Max Kovalenko" < mkovalenko@cybervisiontech.com > wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to bridge legs?
Waiting for your replay ASAP. Thank you in advance.
Best Regards.
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Oops, Full proxy is when neither variable is set to "true". On Wednesday 07 November 2012 06:25:49 Sergey Okhapkin wrote:
Set bypass_media=true and do not set proxy_media variable.
On Wednesday 07 November 2012 03:47:19 Max Kovalenko wrote:
Lets return to root direction of the topic.
How to set Full media proxy mode per channel?
Meaning, what values should be set for channel variables: bypass_media & proxy_media ?
Max Kovalenko --------------- CyberVision Inc.
----- Original Message ----- From: "Dmitry Sytchev" <kbdfck@gmail.com> To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 6, 2012 9:01:59 PM Subject: Re: [Freeswitch-users] media proxy
Media proxy mode not only affects codecs, but any parameters negotiated by SDP. We use media proxy to handle NAT and still allow untouched SDP exchange between customer endpoints and PSTN gateway for T38, for example
2012/11/6 Max Kovalenko < mkovalenko@cybervisiontech.com >
I'm getting the data from external DB containing subscribers' parameters.
Max Kovalenko --------------- CyberVision Inc.
----- Original Message ----- From: "Ben Langfeld" < ben@langfeld.co.uk > To: "FreeSWITCH Users Help" < freeswitch-users@lists.freeswitch.org > Sent: Sunday, November 4, 2012 10:46:00 PM Subject: Re: [Freeswitch-users] media proxy
Can you point to other software that provides this distinction in media proxying?
Regards, Ben Langfeld
On 4 November 2012 11:57, Max Kovalenko < mkovalenko@cybervisiontech.com > wrote:
Unfortunately, it isn't well documented, or else I would not ask about
:))))))
Those parameters perhaps are exclusive of each other, by mechanics they affects to is almost the same. Or at least, I would call them two sides of ame thing.
Theoretically, if you consider the situation of bypass_media=true, that means media flow bypass around Freeswitch, it also automatically annihilates settings of proxy_media variable. It doesn't matter, even you would set proxy_media=true for same channel, it should not provide you "light proxy" of media flow, because your settign of bypass_proxy comprises Freeswitch don't proxy media. Thus I guess in order to set "light" or "hard" proxy the variable bypass_media must be set to FALSE first, for same channel of course.
My task requires either bypass media or light/hard proxy to be set for a channel depending of some conditions of a session. In the other words, I need to set up one of three modes per each channel.
Perhaps I undestand something not so right - I will appreciate if you will correct me with the following:
1. Default (full media proxy) : bypass_media=false ; proxy_media=false
2. Transparent proxy (mine "light proxy"): bypass_media=false; proxy_media=true
3. Bypass media: bupass_media=true (it's doesn't matter what currect value of proxy_media is)
Thanks
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
----- Исходное сообщение ----- От: "Ken Rice" < krice@freeswitch.org > Кому: "FreeSWITCH Users Help" < freeswitch-users@lists.freeswitch.org > Отправленные: Пятница, 2 Ноябрь 2012 г 17:12:11 GMT +02:00 Афины, Бухарест, Стамбул Тема: Re: [Freeswitch-users] media proxy
Default, proxy and bybass media are exclusive of each other, you can not combine them on a single call...
Proxy media is just that proxy the media
Bypass media is just that, bypass freeswitch and send the media direct between the end point...
Setting this options is fairly well documented on the wiki...
On 11/2/12 9:13 AM, "Max Kovalenko" < mkovalenko@cybervisiontech.com >
wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to bridge legs?
Waiting for your replay ASAP. Thank you in advance.
Best Regards.
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
________________________________________________________________________ _ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
This probably will not work if you have NATed endpoints At least, without proper NAT handling on these devices to make them advertise their external host/port in SDP BTW, there is a variable *bypass_media_after_bridge* and it should make FS send re-invite to endpoints connecting them directly 2012/11/7 Sergey Okhapkin <sos@sokhapkin.dyndns.org>
Set bypass_media=true and do not set proxy_media variable.
On Wednesday 07 November 2012 03:47:19 Max Kovalenko wrote:
Lets return to root direction of the topic.
How to set Full media proxy mode per channel?
Meaning, what values should be set for channel variables: bypass_media & proxy_media ?
Max Kovalenko --------------- CyberVision Inc.
----- Original Message ----- From: "Dmitry Sytchev" <kbdfck@gmail.com> To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 6, 2012 9:01:59 PM Subject: Re: [Freeswitch-users] media proxy
Media proxy mode not only affects codecs, but any parameters negotiated by SDP. We use media proxy to handle NAT and still allow untouched SDP exchange between customer endpoints and PSTN gateway for T38, for example
2012/11/6 Max Kovalenko < mkovalenko@cybervisiontech.com >
I'm getting the data from external DB containing subscribers' parameters.
Max Kovalenko --------------- CyberVision Inc.
----- Original Message ----- From: "Ben Langfeld" < ben@langfeld.co.uk > To: "FreeSWITCH Users Help" < freeswitch-users@lists.freeswitch.org > Sent: Sunday, November 4, 2012 10:46:00 PM Subject: Re: [Freeswitch-users] media proxy
Can you point to other software that provides this distinction in media proxying?
Regards, Ben Langfeld
On 4 November 2012 11:57, Max Kovalenko < mkovalenko@cybervisiontech.com> wrote:
Unfortunately, it isn't well documented, or else I would not ask about :))))))
Those parameters perhaps are exclusive of each other, by mechanics they affects to is almost the same. Or at least, I would call them two sides of ame thing.
Theoretically, if you consider the situation of bypass_media=true, that means media flow bypass around Freeswitch, it also automatically annihilates settings of proxy_media variable. It doesn't matter, even you would set proxy_media=true for same channel, it should not provide you "light proxy" of media flow, because your settign of bypass_proxy comprises Freeswitch don't proxy media. Thus I guess in order to set "light" or "hard" proxy the variable bypass_media must be set to FALSE first, for same channel of course.
My task requires either bypass media or light/hard proxy to be set for a channel depending of some conditions of a session. In the other words, I need to set up one of three modes per each channel.
Perhaps I undestand something not so right - I will appreciate if you will correct me with the following:
1. Default (full media proxy) : bypass_media=false ; proxy_media=false
2. Transparent proxy (mine "light proxy"): bypass_media=false; proxy_media=true
3. Bypass media: bupass_media=true (it's doesn't matter what currect value of proxy_media is)
Thanks
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
----- Исходное сообщение ----- От: "Ken Rice" < krice@freeswitch.org > Кому: "FreeSWITCH Users Help" < freeswitch-users@lists.freeswitch.org > Отправленные: Пятница, 2 Ноябрь 2012 г 17:12:11 GMT +02:00 Афины, Бухарест, Стамбул Тема: Re: [Freeswitch-users] media proxy
Default, proxy and bybass media are exclusive of each other, you can not combine them on a single call...
Proxy media is just that proxy the media
Bypass media is just that, bypass freeswitch and send the media direct between the end point...
Setting this options is fairly well documented on the wiki...
On 11/2/12 9:13 AM, "Max Kovalenko" < mkovalenko@cybervisiontech.com > wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to bridge legs?
Waiting for your replay ASAP. Thank you in advance.
Best Regards.
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Best regards, Dmitry Sytchev, IT Engineer
None. It's default. On Wed, Nov 7, 2012 at 9:47 AM, Max Kovalenko < mkovalenko@cybervisiontech.com> wrote:
Lets return to root direction of the topic.
How to set Full media proxy mode per channel?
Meaning, what values should be set for channel variables: bypass_media & proxy_media ?
Max Kovalenko --------------- CyberVision Inc.
----- Original Message ----- From: "Dmitry Sytchev" <kbdfck@gmail.com> To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, November 6, 2012 9:01:59 PM Subject: Re: [Freeswitch-users] media proxy
Media proxy mode not only affects codecs, but any parameters negotiated by SDP. We use media proxy to handle NAT and still allow untouched SDP exchange between customer endpoints and PSTN gateway for T38, for example
2012/11/6 Max Kovalenko < mkovalenko@cybervisiontech.com >
I'm getting the data from external DB containing subscribers' parameters.
Max Kovalenko --------------- CyberVision Inc.
----- Original Message ----- From: "Ben Langfeld" < ben@langfeld.co.uk > To: "FreeSWITCH Users Help" < freeswitch-users@lists.freeswitch.org > Sent: Sunday, November 4, 2012 10:46:00 PM Subject: Re: [Freeswitch-users] media proxy
Can you point to other software that provides this distinction in media proxying?
Regards, Ben Langfeld
On 4 November 2012 11:57, Max Kovalenko < mkovalenko@cybervisiontech.com> wrote:
Unfortunately, it isn't well documented, or else I would not ask about :))))))
Those parameters perhaps are exclusive of each other, by mechanics they affects to is almost the same. Or at least, I would call them two sides of ame thing.
Theoretically, if you consider the situation of bypass_media=true, that means media flow bypass around Freeswitch, it also automatically annihilates settings of proxy_media variable. It doesn't matter, even you would set proxy_media=true for same channel, it should not provide you "light proxy" of media flow, because your settign of bypass_proxy comprises Freeswitch don't proxy media. Thus I guess in order to set "light" or "hard" proxy the variable bypass_media must be set to FALSE first, for same channel of course.
My task requires either bypass media or light/hard proxy to be set for a channel depending of some conditions of a session. In the other words, I need to set up one of three modes per each channel.
Perhaps I undestand something not so right - I will appreciate if you will correct me with the following:
1. Default (full media proxy) : bypass_media=false ; proxy_media=false
2. Transparent proxy (mine "light proxy"): bypass_media=false; proxy_media=true
3. Bypass media: bupass_media=true (it's doesn't matter what currect value of proxy_media is)
Thanks
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
----- Исходное сообщение ----- От: "Ken Rice" < krice@freeswitch.org > Кому: "FreeSWITCH Users Help" < freeswitch-users@lists.freeswitch.org > Отправленные: Пятница, 2 Ноябрь 2012 г 17:12:11 GMT +02:00 Афины, Бухарест, Стамбул Тема: Re: [Freeswitch-users] media proxy
Default, proxy and bybass media are exclusive of each other, you can not combine them on a single call...
Proxy media is just that proxy the media
Bypass media is just that, bypass freeswitch and send the media direct between the end point...
Setting this options is fairly well documented on the wiki...
On 11/2/12 9:13 AM, "Max Kovalenko" < mkovalenko@cybervisiontech.com > wrote:
Hello,
There are two modes of media stream to be proxied or bypassed.
1. Default - "hard proxy" supplying trans coding, DTMF manipulations, etc. 2. Proxy - "light proxy" supplying only symmetrical RTP for mostly NAT traversal purposes. No media stream parsing is supported 3. Media bypass - RTP streams are bypassing FreeSWITCH at all.
There are also two channel parameters affecting above modes: bypass_media and proxy_media.
- Are these parameters independent? Meaning the combination: bypass_media=true AND proxy_media=true is possible. What effect will be?
- Does it means that if I want to turn on "light proxy" I would always need to set bypass_media=false AND proxy_media=true?
- How to set "hard proxy" (full media proxy) per channel before to bridge legs?
Waiting for your replay ASAP. Thank you in advance.
Best Regards.
Max Kovalenko Team Leader VoIP & UC Team Managed Services Dept. CyberVision Inc. ------------------------------------------------- tel. +1 (201) 585-9809 ext. 215 Email: mkovalenko@cybervisiontech.com Skype: mkovalenko_cv, panzer_meister WWW: www.cybervisiontech.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Best regards,
Dmitry Sytchev, IT Engineer
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (5)
-
Ben Langfeld
-
Dmitry Sytchev
-
Max Kovalenko
-
Ognjen Seslija
-
Sergey Okhapkin