Wanpipe - Wanrouter help - freetdm and freeswitch
Hello Everyone ! I am not sure if this error is relevant for this mailing list. My apologies if this is not the forum. I am trying to configure the Sangoma card, with the freetdm installation for Freeswitch. When I complete the wanpipe installation, and try wanrouter status, and wanrouter start I get the following: [root@bfree-server log]# wanrouter start Starting up device: wanpipe1 wanconfig: WAN device wanpipe1 driver load failed !! : ioctl(wanpipe1,ROUTER_SETUP) failed: : 22 - Invalid argument Wanpipe driver did not load properly Please check /var/log/wanrouter and /var/log/messages for errors Configuring interfaces: w1g1 w1g1: unknown interface: No such device done. ___________________________________________________________________ Can anyone help me understand why this is happening ? And how to resolve it. Thanks. Ravi
Hi Ravi, best forum is read the fine sangoma wiki for proper driver installation http://wiki.sangoma.com/ and if that didnt work, try the nice sangoma support. Sangoma + FreeSWITCH is a working combination. Whats unknown is <??? Linux Distro> and Wanpipe Driver <??? Version). That should you collect before contact sangoma techdesk. 2013/8/9 Ravi <sravi123@yahoo.com>
Hello Everyone !
I am not sure if this error is relevant for this mailing list. My apologies if this is not the forum. I am trying to configure the Sangoma card, with the freetdm installation for Freeswitch. When I complete the wanpipe installation, and try wanrouter status, and wanrouter start I get the following:
[root@bfree-server log]# wanrouter start
Starting up device: wanpipe1
wanconfig: WAN device wanpipe1 driver load failed !! : ioctl(wanpipe1,ROUTER_SETUP) failed: : 22 - Invalid argument
Wanpipe driver did not load properly Please check /var/log/wanrouter and /var/log/messages for errors
Configuring interfaces: w1g1 w1g1: unknown interface: No such device
done. ___________________________________________________________________
Can anyone help me understand why this is happening ? And how to resolve it.
Thanks. Ravi
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Mit freundlichen Grüßen *Karsten Horsmann*
Thanks Karsten for the response. I tried he wiki pages on Sangoma. There is little to no documentation on the issue that I am facing. Through Sangoma standard support, I get one email response a day, at the most, which is slower than I would expect. Any quicker response, I have to buy their support, which I am willing to take if I am not able to resolve. Thanks. Ravi On 09-08-2013 21:44, Karsten Horsmann wrote:
Hi Ravi,
best forum is read the fine sangoma wiki for proper driver installation http://wiki.sangoma.com/ and if that didnt work, try the nice sangoma support.
Sangoma + FreeSWITCH is a working combination. Whats unknown is <??? Linux Distro> and Wanpipe Driver <??? Version). That should you collect before contact sangoma techdesk.
2013/8/9 Ravi <sravi123@yahoo.com <mailto:sravi123@yahoo.com>>
Hello Everyone !
I am not sure if this error is relevant for this mailing list. My apologies if this is not the forum. I am trying to configure the Sangoma card, with the freetdm installation for Freeswitch. When I complete the wanpipe installation, and try wanrouter status, and wanrouter start I get the following:
[root@bfree-server log]# wanrouter start
Starting up device: wanpipe1
wanconfig: WAN device wanpipe1 driver load failed !! : ioctl(wanpipe1,ROUTER_SETUP) failed: : 22 - Invalid argument
Wanpipe driver did not load properly Please check /var/log/wanrouter and /var/log/messages for errors
Configuring interfaces: w1g1 w1g1: unknown interface: No such device
done. ___________________________________________________________________
Can anyone help me understand why this is happening ? And how to resolve it.
Thanks. Ravi
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Mit freundlichen Grüßen *Karsten Horsmann*
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
hello: you have to make sure the wanpipe file is there and with right data setting. ? 2013-8-9 20:36, Ravi ??:
Hello Everyone !
I am not sure if this error is relevant for this mailing list. My apologies if this is not the forum. I am trying to configure the Sangoma card, with the freetdm installation for Freeswitch. When I complete the wanpipe installation, and try wanrouter status, and wanrouter start I get the following:
[root@bfree-server log]# wanrouter start
Starting up device: wanpipe1
wanconfig: WAN device wanpipe1 driver load failed !! : ioctl(wanpipe1,ROUTER_SETUP) failed: : 22 - Invalid argument
Wanpipe driver did not load properly Please check /var/log/wanrouter and /var/log/messages for errors
Configuring interfaces: w1g1 w1g1: unknown interface: No such device
done. ___________________________________________________________________
Can anyone help me understand why this is happening ? And how to resolve it.
Thanks. Ravi
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Best regards! Connect with Sangoma in APAC www.hiastar.com -- Best regards! Connect with Sangoma in APAC www.hiastar.com
On Fri, Aug 9, 2013 at 8:36 AM, Ravi <sravi123@yahoo.com> wrote:
Hello Everyone !
I am not sure if this error is relevant for this mailing list. My apologies if this is not the forum. I am trying to configure the Sangoma card, with the freetdm installation for Freeswitch. When I complete the wanpipe installation, and try wanrouter status, and wanrouter start I get the following:
[root@bfree-server log]# wanrouter start
Starting up device: wanpipe1
wanconfig: WAN device wanpipe1 driver load failed !! : ioctl(wanpipe1,ROUTER_SETUP) failed: : 22 - Invalid argument
Wanpipe driver did not load properly Please check /var/log/wanrouter and /var/log/messages for errors
Configuring interfaces: w1g1 w1g1: unknown interface: No such device
done. ___________________________________________________________________
Can anyone help me understand why this is happening ? And how to resolve it.
Per the error message, it failed to configure the card due to an invalid argument. As indicated in the error message as well, more information is contained in /var/log/messages and /var/log/wanrouter When asking for help like this, you have to include your wanpipe configuration. If you provide all configuration to tech support (they have a nice script that collects your hardware info and what not) they should be able to point to the error right away (may be you can as well if you check the logs). Cheers, *Moises Silva **Manager, Software Engineering*** msilva@sangoma.com Sangoma Technologies 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada t. +1 800 388 2475 (N. America) t. +1 905 474 1990 x128 f. +1 905 474 9223 **<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures> Products<http://sangoma.com/products?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Solutions<http://sangoma.com/solutions?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Events<http://sangoma.com/about_us/events?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Contact<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Wiki<http://wiki.sangoma.com/?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Facebook<http://www.facebook.com/pages/Sangoma-VoIP-Cards/43578453335?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Twitter<http://www.twitter.com/sangoma?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>`| | YouTube<http://www.youtube.com/sangomatechnologies?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
Thanks Moises, for your response. Just that I am new to the world of telephony and networking. Was not aware initially about what configuration files to look for and what logs to check. I am picking up, though. Next time, surely, I will have those information handy. My freeswitch is getting configured for a PRI connection and if all goes well, there is a market for such a solution in India, and I would be very happy to promote Sangoma, given their pretty good customer support ! Thanks. Ravi On 16-08-2013 19:02, Moises Silva wrote:
On Fri, Aug 9, 2013 at 8:36 AM, Ravi <sravi123@yahoo.com <mailto:sravi123@yahoo.com>> wrote:
Hello Everyone !
I am not sure if this error is relevant for this mailing list. My apologies if this is not the forum. I am trying to configure the Sangoma card, with the freetdm installation for Freeswitch. When I complete the wanpipe installation, and try wanrouter status, and wanrouter start I get the following:
[root@bfree-server log]# wanrouter start
Starting up device: wanpipe1
wanconfig: WAN device wanpipe1 driver load failed !! : ioctl(wanpipe1,ROUTER_SETUP) failed: : 22 - Invalid argument
Wanpipe driver did not load properly Please check /var/log/wanrouter and /var/log/messages for errors
Configuring interfaces: w1g1 w1g1: unknown interface: No such device
done. ___________________________________________________________________
Can anyone help me understand why this is happening ? And how to resolve it.
Per the error message, it failed to configure the card due to an invalid argument. As indicated in the error message as well, more information is contained in /var/log/messages and /var/log/wanrouter
When asking for help like this, you have to include your wanpipe configuration. If you provide all configuration to tech support (they have a nice script that collects your hardware info and what not) they should be able to point to the error right away (may be you can as well if you check the logs).
Cheers,
*Moises Silva **/Manager, Software Engineering/***
msilva@sangoma.com <mailto:msilva@sangoma.com>
Sangoma Technologies
100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada
t. +1 800 388 2475 (N. America)
t. +1 905 474 1990 x128
f. +1 905 474 9223
** <http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures>
Products <http://sangoma.com/products?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Solutions <http://sangoma.com/solutions?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Events <http://sangoma.com/about_us/events?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Contact <http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Wiki <http://wiki.sangoma.com/?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Facebook <http://www.facebook.com/pages/Sangoma-VoIP-Cards/43578453335?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Twitter <http://www.twitter.com/sangoma?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>`| | YouTube <http://www.youtube.com/sangomatechnologies?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (5)
-
james.zhu
-
Karsten Horsmann
-
Moises Silva
-
Ravi
-
Ravi S