fs_cli will not connect on Fresh install on Debian
Hi All, I did a fresh install of both Debian and FreeSWITCH today, following the article here: https://freeswitch.org/confluence/display/FREESWITCH/Debian However, after installation, fs_cli will not connect. Any ideas? Thanks Richard
On a fresh FS installation fs_cli only connects to 127.0.01 localhost. To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in conf/autoload_configs/event_socket.conf.xml and change the password and maybe even the port depending on the crackability of your network. Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli. Check the ‘command-line Interface fs_cli’ Confluence page for all the details. Bote From: Richard Mace Sent: Friday, 06 March, 2015 14:34 Subject: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian Hi All, I did a fresh install of both Debian and FreeSWITCH today, following the article here: https://freeswitch.org/confluence/display/FREESWITCH/Debian However, after installation, fs_cli will not connect. Any ideas? Thanks Richard
Hi, Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH. Richard On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
*From:* Richard Mace *Sent:* Friday, 06 March, 2015 14:34 *Subject:* [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
remove ::1 localhost ip6-localhost ip6-loopback from /etc/hosts its a bug in debian. On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
*From:* Richard Mace *Sent:* Friday, 06 March, 2015 14:34 *Subject:* [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Brian West* brian@freeswitch.org *Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
@brian Why remove if you use ipv6? just need to make sure there is a line 127.0.0.1 localhost On Fri, Mar 6, 2015 at 3:42 PM, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
*From:* Richard Mace *Sent:* Friday, 06 March, 2015 14:34 *Subject:* [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com
*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Given Brian's comment that suggests that mod_event_socket is probably configured to listen on "127.0.0.1" but fs_cli connects to "localhost" and so tries to connect to ::1 instead, which FreeSWITCH isn't listening on since it's listening for v4 only. So you could workaround that by telling mod_event_socket to listen on "::" On 8 March 2015 at 21:32, Podrigal, Aron <aronp@guaranteedplus.com> wrote:
@brian Why remove if you use ipv6? just need to make sure there is a line 127.0.0.1 localhost
On Fri, Mar 6, 2015 at 3:42 PM, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
*From:* Richard Mace *Sent:* Friday, 06 March, 2015 14:34 *Subject:* [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com
*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I've just set up an IPv6-only machine (127.0.0.1 is the only ipv4 address available), and freeswitch with default configuration: <param name="listen-ip" value="127.0.0.1"/> <param name="listen-port" value="8021"/> The result is that nobody is listening on port 8021 at all (netstat -an | grep 8021). Changing the address to ::1 in autoload_configs/event_socket.conf.xml has helped, although fs_cli now needs the host: fs_cli -H localhost Should I open a Jira ticket? I don't see any reason why the server failed to listen to 127.0.0.1:8021, without any error message. On Mon, Mar 9, 2015 at 1:10 AM, Steven Ayre <steveayre@gmail.com> wrote:
Given Brian's comment that suggests that mod_event_socket is probably configured to listen on "127.0.0.1" but fs_cli connects to "localhost" and so tries to connect to ::1 instead, which FreeSWITCH isn't listening on since it's listening for v4 only. So you could workaround that by telling mod_event_socket to listen on "::"
On 8 March 2015 at 21:32, Podrigal, Aron <aronp@guaranteedplus.com> wrote:
@brian Why remove if you use ipv6? just need to make sure there is a line 127.0.0.1 localhost
On Fri, Mar 6, 2015 at 3:42 PM, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
*From:* Richard Mace *Sent:* Friday, 06 March, 2015 14:34 *Subject:* [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com
*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
127.0.0.1 is hardcoded as a default in libs/esl/fs_cli.c, should you want to submit a patch push request. You could also override that default in /etc/fs_cli.conf or ~/.fs_cli_conf On 9 March 2015 at 01:01, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
I've just set up an IPv6-only machine (127.0.0.1 is the only ipv4 address available), and freeswitch with default configuration:
<param name="listen-ip" value="127.0.0.1"/> <param name="listen-port" value="8021"/>
The result is that nobody is listening on port 8021 at all (netstat -an | grep 8021).
Changing the address to ::1 in autoload_configs/event_socket.conf.xml has helped, although fs_cli now needs the host: fs_cli -H localhost
Should I open a Jira ticket? I don't see any reason why the server failed to listen to 127.0.0.1:8021, without any error message.
On Mon, Mar 9, 2015 at 1:10 AM, Steven Ayre <steveayre@gmail.com> wrote:
Given Brian's comment that suggests that mod_event_socket is probably configured to listen on "127.0.0.1" but fs_cli connects to "localhost" and so tries to connect to ::1 instead, which FreeSWITCH isn't listening on since it's listening for v4 only. So you could workaround that by telling mod_event_socket to listen on "::"
On 8 March 2015 at 21:32, Podrigal, Aron <aronp@guaranteedplus.com> wrote:
@brian Why remove if you use ipv6? just need to make sure there is a line 127.0.0.1 localhost
On Fri, Mar 6, 2015 at 3:42 PM, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
*From:* Richard Mace *Sent:* Friday, 06 March, 2015 14:34 *Subject:* [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com
*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Brian, Removed the line, and rebooted, but still getting: root@FreeSWITCH:~# fs_cli [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error] Richard On 6 March 2015 at 20:42, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
*From:* Richard Mace *Sent:* Friday, 06 March, 2015 14:34 *Subject:* [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com
*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi, Is there an fs_cli command that I can use that will get me round the current bug? Its strange as it's only happened within the last month, as I built a system recently that worked fine out of the box. Thanks Richard On 9 March 2015 at 10:37, Richard Mace <richard.mace@gmail.com> wrote:
Hi Brian, Removed the line, and rebooted, but still getting:
root@FreeSWITCH:~# fs_cli [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
Richard
On 6 March 2015 at 20:42, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
*From:* Richard Mace *Sent:* Friday, 06 March, 2015 14:34 *Subject:* [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com
*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
You could explicitly direct fs_cli to a particular i.p. address either on the command line or using a profile definition. Bote From: Richard Mace Sent: Tuesday, 10 March, 2015 02:20 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian Hi, Is there an fs_cli command that I can use that will get me round the current bug? Its strange as it's only happened within the last month, as I built a system recently that worked fine out of the box. Thanks Richard On 9 March 2015 at 10:37, Richard Mace <richard.mace@gmail.com> wrote: Hi Brian, Removed the line, and rebooted, but still getting: root@FreeSWITCH:~# fs_cli [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error] Richard On 6 March 2015 at 20:42, Brian West <brian@freeswitch.org> wrote: remove ::1 localhost ip6-localhost ip6-loopback from /etc/hosts its a bug in debian. On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote: Hi, Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH. Richard On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote: On a fresh FS installation fs_cli only connects to 127.0.01 localhost. To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in conf/autoload_configs/event_socket.conf.xml and change the password and maybe even the port depending on the crackability of your network. Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli. Check the ‘command-line Interface fs_cli’ Confluence page for all the details. Bote From: Richard Mace Sent: Friday, 06 March, 2015 14:34 Subject: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian Hi All, I did a fresh install of both Debian and FreeSWITCH today, following the article here: https://freeswitch.org/confluence/display/FREESWITCH/Debian However, after installation, fs_cli will not connect. Any ideas? Thanks Richard
Hi Bote, Tried this as well, on the local machine: root@FreeSWITCH:~# fs_cli 127.0.0.1 [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error] root@FreeSWITCH:~# /etc/init.d/freeswitch status [ ok ] freeswitch is running. Richard On 10 March 2015 at 07:11, Bote Man <bote_radio@botecomm.com> wrote:
You could explicitly direct fs_cli to a particular i.p. address either on the command line or using a profile definition.
Bote
*From:* Richard Mace *Sent:* Tuesday, 10 March, 2015 02:20 *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi,
Is there an fs_cli command that I can use that will get me round the current bug?
Its strange as it's only happened within the last month, as I built a system recently that worked fine out of the box.
Thanks
Richard
On 9 March 2015 at 10:37, Richard Mace <richard.mace@gmail.com> wrote:
Hi Brian,
Removed the line, and rebooted, but still getting:
root@FreeSWITCH:~# fs_cli [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
Richard
On 6 March 2015 at 20:42, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
*From:* Richard Mace *Sent:* Friday, 06 March, 2015 14:34 *Subject:* [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
this is exactly what I saw on a system which had no IPv4 address on its ethernet ports. FreeSWITCH was just not listening to port 8021, without any errors in the log. On Tue, Mar 10, 2015 at 9:16 AM, Richard Mace <richard.mace@gmail.com> wrote:
Hi Bote, Tried this as well, on the local machine:
root@FreeSWITCH:~# fs_cli 127.0.0.1 [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
root@FreeSWITCH:~# /etc/init.d/freeswitch status [ ok ] freeswitch is running.
Richard
On 10 March 2015 at 07:11, Bote Man <bote_radio@botecomm.com> wrote:
You could explicitly direct fs_cli to a particular i.p. address either on the command line or using a profile definition.
Bote
From: Richard Mace Sent: Tuesday, 10 March, 2015 02:20 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi,
Is there an fs_cli command that I can use that will get me round the current bug?
Its strange as it's only happened within the last month, as I built a system recently that worked fine out of the box.
Thanks
Richard
On 9 March 2015 at 10:37, Richard Mace <richard.mace@gmail.com> wrote:
Hi Brian,
Removed the line, and rebooted, but still getting:
root@FreeSWITCH:~# fs_cli [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
Richard
On 6 March 2015 at 20:42, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
From: Richard Mace Sent: Friday, 06 March, 2015 14:34 Subject: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Richard, what do you see in the output: netstat -an | grep 8021 On Tue, Mar 10, 2015 at 10:06 AM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
this is exactly what I saw on a system which had no IPv4 address on its ethernet ports. FreeSWITCH was just not listening to port 8021, without any errors in the log.
On Tue, Mar 10, 2015 at 9:16 AM, Richard Mace <richard.mace@gmail.com> wrote:
Hi Bote, Tried this as well, on the local machine:
root@FreeSWITCH:~# fs_cli 127.0.0.1 [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
root@FreeSWITCH:~# /etc/init.d/freeswitch status [ ok ] freeswitch is running.
Richard
On 10 March 2015 at 07:11, Bote Man <bote_radio@botecomm.com> wrote:
You could explicitly direct fs_cli to a particular i.p. address either on the command line or using a profile definition.
Bote
From: Richard Mace Sent: Tuesday, 10 March, 2015 02:20 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi,
Is there an fs_cli command that I can use that will get me round the current bug?
Its strange as it's only happened within the last month, as I built a system recently that worked fine out of the box.
Thanks
Richard
On 9 March 2015 at 10:37, Richard Mace <richard.mace@gmail.com> wrote:
Hi Brian,
Removed the line, and rebooted, but still getting:
root@FreeSWITCH:~# fs_cli [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
Richard
On 6 March 2015 at 20:42, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
From: Richard Mace Sent: Friday, 06 March, 2015 14:34 Subject: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Nothing, by the looks of things root@FreeSWITCH:~# netstat -an | grep 8021 root@FreeSWITCH:~# Thanks On 10 March 2015 at 09:07, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Richard, what do you see in the output:
netstat -an | grep 8021
On Tue, Mar 10, 2015 at 10:06 AM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
this is exactly what I saw on a system which had no IPv4 address on its ethernet ports. FreeSWITCH was just not listening to port 8021, without any errors in the log.
On Tue, Mar 10, 2015 at 9:16 AM, Richard Mace <richard.mace@gmail.com> wrote:
Hi Bote, Tried this as well, on the local machine:
root@FreeSWITCH:~# fs_cli 127.0.0.1 [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
root@FreeSWITCH:~# /etc/init.d/freeswitch status [ ok ] freeswitch is running.
Richard
On 10 March 2015 at 07:11, Bote Man <bote_radio@botecomm.com> wrote:
You could explicitly direct fs_cli to a particular i.p. address either
on
the command line or using a profile definition.
Bote
From: Richard Mace Sent: Tuesday, 10 March, 2015 02:20 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi,
Is there an fs_cli command that I can use that will get me round the current bug?
Its strange as it's only happened within the last month, as I built a system recently that worked fine out of the box.
Thanks
Richard
On 9 March 2015 at 10:37, Richard Mace <richard.mace@gmail.com> wrote:
Hi Brian,
Removed the line, and rebooted, but still getting:
root@FreeSWITCH:~# fs_cli [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
Richard
On 6 March 2015 at 20:42, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
From: Richard Mace Sent: Friday, 06 March, 2015 14:34 Subject: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
alright, I'll file a Jira ticket On Tue, Mar 10, 2015 at 10:24 AM, Richard Mace <richard.mace@gmail.com> wrote:
Nothing, by the looks of things
root@FreeSWITCH:~# netstat -an | grep 8021 root@FreeSWITCH:~#
Thanks
On 10 March 2015 at 09:07, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Richard, what do you see in the output:
netstat -an | grep 8021
On Tue, Mar 10, 2015 at 10:06 AM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
this is exactly what I saw on a system which had no IPv4 address on its ethernet ports. FreeSWITCH was just not listening to port 8021, without any errors in the log.
On Tue, Mar 10, 2015 at 9:16 AM, Richard Mace <richard.mace@gmail.com> wrote:
Hi Bote, Tried this as well, on the local machine:
root@FreeSWITCH:~# fs_cli 127.0.0.1 [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
root@FreeSWITCH:~# /etc/init.d/freeswitch status [ ok ] freeswitch is running.
Richard
On 10 March 2015 at 07:11, Bote Man <bote_radio@botecomm.com> wrote:
You could explicitly direct fs_cli to a particular i.p. address either on the command line or using a profile definition.
Bote
From: Richard Mace Sent: Tuesday, 10 March, 2015 02:20 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi,
Is there an fs_cli command that I can use that will get me round the current bug?
Its strange as it's only happened within the last month, as I built a system recently that worked fine out of the box.
Thanks
Richard
On 9 March 2015 at 10:37, Richard Mace <richard.mace@gmail.com> wrote:
Hi Brian,
Removed the line, and rebooted, but still getting:
root@FreeSWITCH:~# fs_cli [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
Richard
On 6 March 2015 at 20:42, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
From: Richard Mace Sent: Friday, 06 March, 2015 14:34 Subject: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
in the mean time, you can attach the socket initerface to the IPv6 loopback like I mentioned earlier. That works, although a bit inconvenient On Tue, Mar 10, 2015 at 10:29 AM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
alright, I'll file a Jira ticket
On Tue, Mar 10, 2015 at 10:24 AM, Richard Mace <richard.mace@gmail.com> wrote:
Nothing, by the looks of things
root@FreeSWITCH:~# netstat -an | grep 8021 root@FreeSWITCH:~#
Thanks
On 10 March 2015 at 09:07, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Richard, what do you see in the output:
netstat -an | grep 8021
On Tue, Mar 10, 2015 at 10:06 AM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
this is exactly what I saw on a system which had no IPv4 address on its ethernet ports. FreeSWITCH was just not listening to port 8021, without any errors in the log.
On Tue, Mar 10, 2015 at 9:16 AM, Richard Mace <richard.mace@gmail.com> wrote:
Hi Bote, Tried this as well, on the local machine:
root@FreeSWITCH:~# fs_cli 127.0.0.1 [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
root@FreeSWITCH:~# /etc/init.d/freeswitch status [ ok ] freeswitch is running.
Richard
On 10 March 2015 at 07:11, Bote Man <bote_radio@botecomm.com> wrote:
You could explicitly direct fs_cli to a particular i.p. address either on the command line or using a profile definition.
Bote
From: Richard Mace Sent: Tuesday, 10 March, 2015 02:20 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi,
Is there an fs_cli command that I can use that will get me round the current bug?
Its strange as it's only happened within the last month, as I built a system recently that worked fine out of the box.
Thanks
Richard
On 9 March 2015 at 10:37, Richard Mace <richard.mace@gmail.com> wrote:
Hi Brian,
Removed the line, and rebooted, but still getting:
root@FreeSWITCH:~# fs_cli [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
Richard
On 6 March 2015 at 20:42, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
From: Richard Mace Sent: Friday, 06 March, 2015 14:34 Subject: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Are you sure it's trying to load mod_event_socket? Unless it loads that module it won't listen on 8021. If it is trying to, perhaps start freeswitch in the foreground (-c option) and then (re)load the module once it's running. If there's an error that'll hopefully show it up if it's not making it to the log file. On 10 March 2015 at 09:24, Richard Mace <richard.mace@gmail.com> wrote:
Nothing, by the looks of things
root@FreeSWITCH:~# netstat -an | grep 8021 root@FreeSWITCH:~#
Thanks
On 10 March 2015 at 09:07, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Richard, what do you see in the output:
netstat -an | grep 8021
On Tue, Mar 10, 2015 at 10:06 AM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
this is exactly what I saw on a system which had no IPv4 address on its ethernet ports. FreeSWITCH was just not listening to port 8021, without any errors in the log.
On Tue, Mar 10, 2015 at 9:16 AM, Richard Mace <richard.mace@gmail.com> wrote:
Hi Bote, Tried this as well, on the local machine:
root@FreeSWITCH:~# fs_cli 127.0.0.1 [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
root@FreeSWITCH:~# /etc/init.d/freeswitch status [ ok ] freeswitch is running.
Richard
On 10 March 2015 at 07:11, Bote Man <bote_radio@botecomm.com> wrote:
You could explicitly direct fs_cli to a particular i.p. address
either on
the command line or using a profile definition.
Bote
From: Richard Mace Sent: Tuesday, 10 March, 2015 02:20 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi,
Is there an fs_cli command that I can use that will get me round the current bug?
Its strange as it's only happened within the last month, as I built a system recently that worked fine out of the box.
Thanks
Richard
On 9 March 2015 at 10:37, Richard Mace <richard.mace@gmail.com> wrote:
Hi Brian,
Removed the line, and rebooted, but still getting:
root@FreeSWITCH:~# fs_cli [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
Richard
On 6 March 2015 at 20:42, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
From: Richard Mace Sent: Friday, 06 March, 2015 14:34 Subject: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I submitted https://freeswitch.org/jira/browse/FS-7358 mod_event_socket is loaded, and then 2015-03-10 11:29:48.367067 [NOTICE] switch_loadable_module.c:102 Thread ended for mod_event_socket On Tue, Mar 10, 2015 at 12:04 PM, Steven Ayre <steveayre@gmail.com> wrote:
Are you sure it's trying to load mod_event_socket? Unless it loads that module it won't listen on 8021.
If it is trying to, perhaps start freeswitch in the foreground (-c option) and then (re)load the module once it's running. If there's an error that'll hopefully show it up if it's not making it to the log file.
On 10 March 2015 at 09:24, Richard Mace <richard.mace@gmail.com> wrote:
Nothing, by the looks of things
root@FreeSWITCH:~# netstat -an | grep 8021 root@FreeSWITCH:~#
Thanks
On 10 March 2015 at 09:07, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Richard, what do you see in the output:
netstat -an | grep 8021
On Tue, Mar 10, 2015 at 10:06 AM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
this is exactly what I saw on a system which had no IPv4 address on its ethernet ports. FreeSWITCH was just not listening to port 8021, without any errors in the log.
On Tue, Mar 10, 2015 at 9:16 AM, Richard Mace <richard.mace@gmail.com> wrote:
Hi Bote, Tried this as well, on the local machine:
root@FreeSWITCH:~# fs_cli 127.0.0.1 [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
root@FreeSWITCH:~# /etc/init.d/freeswitch status [ ok ] freeswitch is running.
Richard
On 10 March 2015 at 07:11, Bote Man <bote_radio@botecomm.com> wrote:
You could explicitly direct fs_cli to a particular i.p. address either on the command line or using a profile definition.
Bote
From: Richard Mace Sent: Tuesday, 10 March, 2015 02:20 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi,
Is there an fs_cli command that I can use that will get me round the current bug?
Its strange as it's only happened within the last month, as I built a system recently that worked fine out of the box.
Thanks
Richard
On 9 March 2015 at 10:37, Richard Mace <richard.mace@gmail.com> wrote:
Hi Brian,
Removed the line, and rebooted, but still getting:
root@FreeSWITCH:~# fs_cli [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
Richard
On 6 March 2015 at 20:42, Brian West <brian@freeswitch.org> wrote:
remove
::1 localhost ip6-localhost ip6-loopback
from /etc/hosts
its a bug in debian.
On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace@gmail.com> wrote:
Hi,
Sorry, I should have clarified that this is running locally on the machine running FreeSWITCH.
Richard
On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote:
On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
To connect from a remote machine put a valid routable interface address (although I have 0.0.0.0 in mine) in
conf/autoload_configs/event_socket.conf.xml
and change the password and maybe even the port depending on the crackability of your network.
Then you’ll probably want to configure a profile configuration file with tight permissions to avoid having to type the parameters on the command line every time you start fs_cli.
Check the ‘command-line Interface fs_cli’ Confluence page for all the details.
Bote
From: Richard Mace Sent: Friday, 06 March, 2015 14:34 Subject: [Freeswitch-users] fs_cli will not connect on Fresh install on Debian
Hi All,
I did a fresh install of both Debian and FreeSWITCH today, following the article here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian
However, after installation, fs_cli will not connect. Any ideas?
Thanks
Richard
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks Stanislav, Much appreciated. Richard On 10 March 2015 at 11:19, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
I submitted https://freeswitch.org/jira/browse/FS-7358
mod_event_socket is loaded, and then 2015-03-10 11:29:48.367067 [NOTICE] switch_loadable_module.c:102 Thread ended for mod_event_socket
On Tue, Mar 10, 2015 at 12:04 PM, Steven Ayre <steveayre@gmail.com> wrote:
Are you sure it's trying to load mod_event_socket? Unless it loads that module it won't listen on 8021.
If it is trying to, perhaps start freeswitch in the foreground (-c option) and then (re)load the module once it's running. If there's an error that'll hopefully show it up if it's not making it to the log file.
On 10 March 2015 at 09:24, Richard Mace <richard.mace@gmail.com> wrote:
Nothing, by the looks of things
root@FreeSWITCH:~# netstat -an | grep 8021 root@FreeSWITCH:~#
Thanks
On 10 March 2015 at 09:07, Stanislav Sinyagin <ssinyagin@gmail.com>
wrote:
Richard, what do you see in the output:
netstat -an | grep 8021
On Tue, Mar 10, 2015 at 10:06 AM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
this is exactly what I saw on a system which had no IPv4 address on its ethernet ports. FreeSWITCH was just not listening to port 8021, without any errors in the log.
On Tue, Mar 10, 2015 at 9:16 AM, Richard Mace <
richard.mace@gmail.com>
wrote:
Hi Bote, Tried this as well, on the local machine:
root@FreeSWITCH:~# fs_cli 127.0.0.1 [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
root@FreeSWITCH:~# /etc/init.d/freeswitch status [ ok ] freeswitch is running.
Richard
On 10 March 2015 at 07:11, Bote Man <bote_radio@botecomm.com> wrote: > > You could explicitly direct fs_cli to a particular i.p. address > either on > the command line or using a profile definition. > > > > Bote > > > > > > From: Richard Mace > Sent: Tuesday, 10 March, 2015 02:20 > To: FreeSWITCH Users Help > Subject: Re: [Freeswitch-users] fs_cli will not connect on Fresh > install > on Debian > > > > Hi, > > Is there an fs_cli command that I can use that will get me round the > current bug? > > Its strange as it's only happened within the last month, as I built a > system recently that worked fine out of the box. > > > > Thanks > > > > Richard > > > > On 9 March 2015 at 10:37, Richard Mace <richard.mace@gmail.com> > wrote: > > Hi Brian, > > Removed the line, and rebooted, but still getting: > > root@FreeSWITCH:~# fs_cli > [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection > Error] > > Richard > > > > On 6 March 2015 at 20:42, Brian West <brian@freeswitch.org> wrote: > > remove > > ::1 localhost ip6-localhost ip6-loopback > > > > from /etc/hosts > > > > its a bug in debian. > > > > On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace < richard.mace@gmail.com> > wrote: > > Hi, > > > > Sorry, I should have clarified that this is running locally on the > machine > running FreeSWITCH. > > > > Richard > > > > On 6 March 2015 at 20:02, Bote Man <bote_radio@botecomm.com> wrote: > > On a fresh FS installation fs_cli only connects to 127.0.01 > localhost. > > > > To connect from a remote machine put a valid routable interface > address > (although I have 0.0.0.0 in mine) in > > conf/autoload_configs/event_socket.conf.xml > > > > and change the password and maybe even the port depending on the > crackability of your network. > > > > Then you’ll probably want to configure a profile configuration file > with > tight permissions to avoid having to type the parameters on the > command line > every time you start fs_cli. > > > > Check the ‘command-line Interface fs_cli’ Confluence page for all the > details. > > > > Bote > > > > > > From: Richard Mace > Sent: Friday, 06 March, 2015 14:34 > Subject: [Freeswitch-users] fs_cli will not connect on Fresh install > on > Debian > > > > Hi All, > > I did a fresh install of both Debian and FreeSWITCH today, following > the > article here: > > https://freeswitch.org/confluence/display/FREESWITCH/Debian > > > > However, after installation, fs_cli will not connect. Any ideas? > > > > Thanks > > > > Richard > > > > > > > >
> Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (6)
-
Bote Man
-
Brian West
-
Podrigal, Aron
-
Richard Mace
-
Stanislav Sinyagin
-
Steven Ayre