Hi, Thanks to all the support we got in mailing lists and our telco, we put our freeswitch PBX online today. We are using Sangoma A101 and A200 Cards. We are successfully receiving the calls on our PRI and Analogue lines. But, we don't get caller-id on our analogue Lines. In India, Caller id comes in as DTMF tones and I could see the caller ID being detected correctly in debug. I have seen this issue raised earlier on the list and Moises Silva from Sangoma offered to fix it if given access to the server. Here is the link http://comments.gmane.org/gmane.comp.telephony.freeswitch.user/32340 I wanted to know whether anyone has come up with a solution. I am open to give access to our server if Moises Silva or anyone else in Sangoma would like to have a look at it. Thanks, Ryan
I think India uses polarity reversal to indicate start of caller id on PRI line, which i guess is not fully supported by FreeTDM yet. However, you can try the following FreeTDM options, though i am not sure if they will work. <param name="tonegroup" value="in" /> <param name="enable-callerid" value="true" /> <param name="answer-polarity-reverse" value="true" /> You may try to set last parameter to false and test again. Do let us know if it works or not. I am not much familiar with FreeTDM code, nor got the equipment to test, so for those who have, please see below link regarding same problem in Asterisk and how they solved it, https://issues.asterisk.org/print_bug_page.php?bug_id=6683 Hope this helps. Thank you. On Sat, Dec 24, 2011 at 6:57 PM, Ryan V <ryan@kaevee.com> wrote:
Hi,
Thanks to all the support we got in mailing lists and our telco, we put our freeswitch PBX online today.
We are using Sangoma A101 and A200 Cards. We are successfully receiving the calls on our PRI and Analogue lines. But, we don't get caller-id on our analogue Lines. In India, Caller id comes in as DTMF tones and I could see the caller ID being detected correctly in debug.
I have seen this issue raised earlier on the list and Moises Silva from Sangoma offered to fix it if given access to the server. Here is the link http://comments.gmane.org/gmane.comp.telephony.freeswitch.user/32340
I wanted to know whether anyone has come up with a solution. I am open to give access to our server if Moises Silva or anyone else in Sangoma would like to have a look at it.
Thanks,
Ryan
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Muhammad Shahzad ----------------------------------- CISCO Rich Media Communication Specialist (CRMCS) CISCO Certified Network Associate (CCNA) Cell: +92 334 422 40 88 MSN: shari_786pk@hotmail.com Email: shaheryarkh@googlemail.com
Caller ID on PRI line works fine. I have problem only with calls coming in on FXO. Thanks, Venkatesh K On Sun, Dec 25, 2011 at 1:33 AM, Muhammad Shahzad < shaheryarkh@googlemail.com> wrote:
I think India uses polarity reversal to indicate start of caller id on PRI line, which i guess is not fully supported by FreeTDM yet. However, you can try the following FreeTDM options, though i am not sure if they will work.
<param name="tonegroup" value="in" /> <param name="enable-callerid" value="true" /> <param name="answer-polarity-reverse" value="true" />
You may try to set last parameter to false and test again. Do let us know if it works or not.
I am not much familiar with FreeTDM code, nor got the equipment to test, so for those who have, please see below link regarding same problem in Asterisk and how they solved it,
https://issues.asterisk.org/print_bug_page.php?bug_id=6683
Hope this helps.
Thank you.
On Sat, Dec 24, 2011 at 6:57 PM, Ryan V <ryan@kaevee.com> wrote:
Hi,
Thanks to all the support we got in mailing lists and our telco, we put our freeswitch PBX online today.
We are using Sangoma A101 and A200 Cards. We are successfully receiving the calls on our PRI and Analogue lines. But, we don't get caller-id on our analogue Lines. In India, Caller id comes in as DTMF tones and I could see the caller ID being detected correctly in debug.
I have seen this issue raised earlier on the list and Moises Silva from Sangoma offered to fix it if given access to the server. Here is the link http://comments.gmane.org/gmane.comp.telephony.freeswitch.user/32340
I wanted to know whether anyone has come up with a solution. I am open to give access to our server if Moises Silva or anyone else in Sangoma would like to have a look at it.
Thanks,
Ryan
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Muhammad Shahzad ----------------------------------- CISCO Rich Media Communication Specialist (CRMCS) CISCO Certified Network Associate (CCNA) Cell: +92 334 422 40 88 MSN: shari_786pk@hotmail.com Email: shaheryarkh@googlemail.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi, I am the person whose thread you mentioned. I've also had somebody contact me off the list regarding this. What I did in my case was jut get some sort of dtmf converter. It costs Rs 200 and is Made in China. You plug in your FXO line in it and take another wire from it to your sangoma card. Caller ID is detected then. The only labeling it has on it is NetSonic. Somebody who contacted me tried to find it online but wasn't able to I think. I was referred to a shop here by the guy who I buy my Sangoma cards from. Muhammad Shahzad is right about polarity reversal, I confirmed this with the telco (Airtel). I do have hardware to test this or give access to somebody who wants to test a fix. But I just moved to a new place and dont have anything set up right now. It'll take a week before I have servers set up. Regards guru On Sun, Dec 25, 2011 at 7:42 AM, Ryan V <ryan@kaevee.com> wrote:
Caller ID on PRI line works fine. I have problem only with calls coming in on FXO.
Thanks,
Venkatesh K
On Sun, Dec 25, 2011 at 1:33 AM, Muhammad Shahzad <shaheryarkh@googlemail.com> wrote:
I think India uses polarity reversal to indicate start of caller id on PRI line, which i guess is not fully supported by FreeTDM yet. However, you can try the following FreeTDM options, though i am not sure if they will work.
<param name="tonegroup" value="in" /> <param name="enable-callerid" value="true" /> <param name="answer-polarity-reverse" value="true" />
You may try to set last parameter to false and test again. Do let us know if it works or not.
I am not much familiar with FreeTDM code, nor got the equipment to test, so for those who have, please see below link regarding same problem in Asterisk and how they solved it,
https://issues.asterisk.org/print_bug_page.php?bug_id=6683
Hope this helps.
Thank you.
On Sat, Dec 24, 2011 at 6:57 PM, Ryan V <ryan@kaevee.com> wrote:
Hi,
Thanks to all the support we got in mailing lists and our telco, we put our freeswitch PBX online today.
We are using Sangoma A101 and A200 Cards. We are successfully receiving the calls on our PRI and Analogue lines. But, we don't get caller-id on our analogue Lines. In India, Caller id comes in as DTMF tones and I could see the caller ID being detected correctly in debug.
I have seen this issue raised earlier on the list and Moises Silva from Sangoma offered to fix it if given access to the server. Here is the link http://comments.gmane.org/gmane.comp.telephony.freeswitch.user/32340
I wanted to know whether anyone has come up with a solution. I am open to give access to our server if Moises Silva or anyone else in Sangoma would like to have a look at it.
Thanks,
Ryan
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Muhammad Shahzad ----------------------------------- CISCO Rich Media Communication Specialist (CRMCS) CISCO Certified Network Associate (CCNA) Cell: +92 334 422 40 88 MSN: shari_786pk@hotmail.com Email: shaheryarkh@googlemail.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi, I think if you add some external module to capture the CLI, it wont help you because CLI is not detected by Freeeswitch. saying this bacause I am from PBX line & have good experience of the said problem. I would like to suggest to check the CLI type. It may be in FSK mode. Eaelier I had used Grandstream FXO gateways to detect the FSK CLI. Can'nt say about DTMF. You can confirm with grandstream people. Having said this, another check point is - Check the CLI type whether it is before ring or between ring. This is important if your CLI is in dtmf. If it is so, you may have to give some time to detect the CLI. We call it CLIP timer. At last, someone mentioned the CLI relation with polarity reversal. i do not think there is any relation between CLI & polarity reversal. Feel free to discuss further. Regards Sharad ----- Original Message ----- From: "guru singh" <grsingh750@gmail.com> To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, December 27, 2011 5:49 PM Subject: Re: [Freeswitch-users] Caller ID on Analog Lines Hi, I am the person whose thread you mentioned. I've also had somebody contact me off the list regarding this. What I did in my case was jut get some sort of dtmf converter. It costs Rs 200 and is Made in China. You plug in your FXO line in it and take another wire from it to your sangoma card. Caller ID is detected then. The only labeling it has on it is NetSonic. Somebody who contacted me tried to find it online but wasn't able to I think. I was referred to a shop here by the guy who I buy my Sangoma cards from. Muhammad Shahzad is right about polarity reversal, I confirmed this with the telco (Airtel). I do have hardware to test this or give access to somebody who wants to test a fix. But I just moved to a new place and dont have anything set up right now. It'll take a week before I have servers set up. Regards guru On Sun, Dec 25, 2011 at 7:42 AM, Ryan V <ryan@kaevee.com> wrote:
Caller ID on PRI line works fine. I have problem only with calls coming in on FXO.
Thanks,
Venkatesh K
On Sun, Dec 25, 2011 at 1:33 AM, Muhammad Shahzad <shaheryarkh@googlemail.com> wrote:
I think India uses polarity reversal to indicate start of caller id on PRI line, which i guess is not fully supported by FreeTDM yet. However, you can try the following FreeTDM options, though i am not sure if they will work.
<param name="tonegroup" value="in" /> <param name="enable-callerid" value="true" /> <param name="answer-polarity-reverse" value="true" />
You may try to set last parameter to false and test again. Do let us know if it works or not.
I am not much familiar with FreeTDM code, nor got the equipment to test, so for those who have, please see below link regarding same problem in Asterisk and how they solved it,
https://issues.asterisk.org/print_bug_page.php?bug_id=6683
Hope this helps.
Thank you.
On Sat, Dec 24, 2011 at 6:57 PM, Ryan V <ryan@kaevee.com> wrote:
Hi,
Thanks to all the support we got in mailing lists and our telco, we put our freeswitch PBX online today.
We are using Sangoma A101 and A200 Cards. We are successfully receiving the calls on our PRI and Analogue lines. But, we don't get caller-id on our analogue Lines. In India, Caller id comes in as DTMF tones and I could see the caller ID being detected correctly in debug.
I have seen this issue raised earlier on the list and Moises Silva from Sangoma offered to fix it if given access to the server. Here is the link http://comments.gmane.org/gmane.comp.telephony.freeswitch.user/32340
I wanted to know whether anyone has come up with a solution. I am open to give access to our server if Moises Silva or anyone else in Sangoma would like to have a look at it.
Thanks,
Ryan
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Muhammad Shahzad ----------------------------------- CISCO Rich Media Communication Specialist (CRMCS) CISCO Certified Network Associate (CCNA) Cell: +92 334 422 40 88 MSN: shari_786pk@hotmail.com Email: shaheryarkh@googlemail.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
A trick I learned when dealing with Turkish Telekom and CLI problems etc.. on FXO lines. When dealing with Analog lines try to find out maker and model of the Central PBX you are connected to, then search about tha model on the internet, this might give you better technical knowledge (at least what is supported and what is not). Good luck, Kerem On Tue, Dec 27, 2011 at 2:34 PM, sharad <sharad@coraltele.com> wrote:
Hi,
I think if you add some external module to capture the CLI, it wont help you because CLI is not detected by Freeeswitch. saying this bacause I am from PBX line & have good experience of the said problem.
I would like to suggest to check the CLI type. It may be in FSK mode. Eaelier I had used Grandstream FXO gateways to detect the FSK CLI. Can'nt say about DTMF. You can confirm with grandstream people.
Having said this, another check point is - Check the CLI type whether it is before ring or between ring. This is important if your CLI is in dtmf. If it is so, you may have to give some time to detect the CLI. We call it CLIP timer.
At last, someone mentioned the CLI relation with polarity reversal. i do not think there is any relation between CLI & polarity reversal.
Feel free to discuss further.
Regards Sharad
----- Original Message ----- From: "guru singh" <grsingh750@gmail.com> To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Sent: Tuesday, December 27, 2011 5:49 PM Subject: Re: [Freeswitch-users] Caller ID on Analog Lines
Hi,
I am the person whose thread you mentioned. I've also had somebody contact me off the list regarding this. What I did in my case was jut get some sort of dtmf converter. It costs Rs 200 and is Made in China. You plug in your FXO line in it and take another wire from it to your sangoma card. Caller ID is detected then. The only labeling it has on it is NetSonic. Somebody who contacted me tried to find it online but wasn't able to I think. I was referred to a shop here by the guy who I buy my Sangoma cards from.
Muhammad Shahzad is right about polarity reversal, I confirmed this with the telco (Airtel). I do have hardware to test this or give access to somebody who wants to test a fix. But I just moved to a new place and dont have anything set up right now. It'll take a week before I have servers set up.
Regards guru
On Sun, Dec 25, 2011 at 7:42 AM, Ryan V <ryan@kaevee.com> wrote:
Caller ID on PRI line works fine. I have problem only with calls coming in on FXO.
Thanks,
Venkatesh K
On Sun, Dec 25, 2011 at 1:33 AM, Muhammad Shahzad <shaheryarkh@googlemail.com> wrote:
I think India uses polarity reversal to indicate start of caller id on PRI line, which i guess is not fully supported by FreeTDM yet. However, you can try the following FreeTDM options, though i am not sure if they will work.
<param name="tonegroup" value="in" /> <param name="enable-callerid" value="true" /> <param name="answer-polarity-reverse" value="true" />
You may try to set last parameter to false and test again. Do let us
know
if it works or not.
I am not much familiar with FreeTDM code, nor got the equipment to test, so for those who have, please see below link regarding same problem in Asterisk and how they solved it,
https://issues.asterisk.org/print_bug_page.php?bug_id=6683
Hope this helps.
Thank you.
On Sat, Dec 24, 2011 at 6:57 PM, Ryan V <ryan@kaevee.com> wrote:
Hi,
Thanks to all the support we got in mailing lists and our telco, we put our freeswitch PBX online today.
We are using Sangoma A101 and A200 Cards. We are successfully receiving the calls on our PRI and Analogue lines. But, we don't get caller-id on our analogue Lines. In India, Caller id comes in as DTMF tones and I could see the caller ID being detected correctly in debug.
I have seen this issue raised earlier on the list and Moises Silva from Sangoma offered to fix it if given access to the server. Here is the link http://comments.gmane.org/gmane.comp.telephony.freeswitch.user/32340
I wanted to know whether anyone has come up with a solution. I am open to give access to our server if Moises Silva or anyone else in Sangoma would like to have a look at it.
Thanks,
Ryan
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Muhammad Shahzad ----------------------------------- CISCO Rich Media Communication Specialist (CRMCS) CISCO Certified Network Associate (CCNA) Cell: +92 334 422 40 88 MSN: shari_786pk@hotmail.com Email: shaheryarkh@googlemail.com
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kerem Erciyes - Sistem Danismani http://keremerciyes.com
participants (5)
-
guru singh
-
Kerem Erciyes
-
Muhammad Shahzad
-
Ryan V
-
sharad