Anyone had any luck getting the Sangoma A 102 card into a 1 U box? I'm looking to build 2 freeswitch servers for redundancy, and was wondering if anyone has had any luck getting these cards to work with 1U riser cards and if so with what brand of case/mobo? Any recommended bare bones kits would be awesome too. I'm not afraid to install a ESB motherboard or anything its just the last time I did it, it ended up involving a vise and a hacksaw, and the CEO isn't amused to walking in on such scenes in our tech department.
On Thu, Sep 25, 2008 at 3:12 AM, John Nicholson <nicholsonster@gmail.com>wrote: Anyone had any luck getting the Sangoma A 102 card into a 1 U box?
I'm looking to build 2 freeswitch servers for redundancy, and was wondering if anyone has had any luck getting these cards to work with 1U riser cards and if so with what brand of case/mobo?
yes, lots, we have 1U boxes with 2 x A108 in them (one pci and one pci-x Intel SR1530CL, great boxes, low cost and good quality) -- wasim h. baig | principal consultant | convergence pk | +92 300 8508070 | as you scope creep, so shall we reap ...
if you are buying sangoma cards for FS, tell doug I'm supposed to get a kickback =D On Wed, Sep 24, 2008 at 4:26 PM, Wasim Baig <wasim@convergence.pk> wrote:
On Thu, Sep 25, 2008 at 3:12 AM, John Nicholson <nicholsonster@gmail.com>wrote:
Anyone had any luck getting the Sangoma A 102 card into a 1 U box?
I'm looking to build 2 freeswitch servers for redundancy, and was wondering if anyone has had any luck getting these cards to work with 1U riser cards and if so with what brand of case/mobo?
yes, lots, we have 1U boxes with 2 x A108 in them (one pci and one pci-x Intel SR1530CL, great boxes, low cost and good quality)
-- wasim h. baig | principal consultant | convergence pk | +92 300 8508070 | as you scope creep, so shall we reap ...
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
Just look at a dell 1950... You can cram them in there just fine
From: John Nicholson <nicholsonster@gmail.com> Reply-To: <freeswitch-users@lists.freeswitch.org> Date: Wed, 24 Sep 2008 16:12:25 -0500 To: <Freeswitch-users@lists.freeswitch.org> Subject: [Freeswitch-users] 1U servers and Sangoma A102 Card
Anyone had any luck getting the Sangoma A 102 card into a 1 U box?
I'm looking to build 2 freeswitch servers for redundancy, and was wondering if anyone has had any luck getting these cards to work with 1U riser cards and if so with what brand of case/mobo?
Any recommended bare bones kits would be awesome too. I'm not afraid to install a ESB motherboard or anything its just the last time I did it, it ended up involving a vise and a hacksaw, and the CEO isn't amused to walking in on such scenes in our tech department.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Anthony Minessale
-
John Nicholson
-
Ken Rice
-
Wasim Baig