call failed from PLMN to enum number
Hi, I have an enum number, if I call the number from any ip extension ( i use default enum.conf that points to e164.arpa) then the call goes well to my ATA that registers to my fs box, but if i try to call the number from PLMN, i get the ring at my ATA and if i pick it up, there's no sound. here's my public.xml config : <extension name="enum"> <condition field="destination_number" expression="^12345678"> <action application="set" data="proxy_media=true"/> <action application="bridge" data="sofia/default/1000%1.2.3.4"/> </condition> </extension> For more detailed debug log, i already submit it on jira : http://jira.freeswitch.org/browse/MODAPP-186 regards, -Pieter-
First off I would try the latest SVN Trunk you're a bit behind. Secondly I would try without proxy media mode on. /b On Dec 22, 2008, at 7:19 AM, Pieter Eduard wrote:
Hi,
I have an enum number, if I call the number from any ip extension ( i use default enum.conf that points to e164.arpa) then the call goes well to my ATA that registers to my fs box, but if i try to call the number from PLMN, i get the ring at my ATA and if i pick it up, there's no sound.
here's my public.xml config :
<extension name="enum"> <condition field="destination_number" expression="^12345678"> <action application="set" data="proxy_media=true"/> <action application="bridge" data="sofia/default/ 1000%1.2.3.4"/> </condition> </extension>
For more detailed debug log, i already submit it on jira : http://jira.freeswitch.org/browse/MODAPP-186
regards,
-Pieter-
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I also need you to do this call again with "console loglevel debug" on and post it attached to the jira and not inline on the comments please. /b On Dec 22, 2008, at 7:19 AM, Pieter Eduard wrote:
Hi,
I have an enum number, if I call the number from any ip extension ( i use default enum.conf that points to e164.arpa) then the call goes well to my ATA that registers to my fs box, but if i try to call the number from PLMN, i get the ring at my ATA and if i pick it up, there's no sound.
here's my public.xml config :
<extension name="enum"> <condition field="destination_number" expression="^12345678"> <action application="set" data="proxy_media=true"/> <action application="bridge" data="sofia/default/ 1000%1.2.3.4"/> </condition> </extension>
For more detailed debug log, i already submit it on jira : http://jira.freeswitch.org/browse/MODAPP-186
regards,
-Pieter-
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Brian, I already update the fs to FreeSWITCH Version 1.0.trunk (10906M), and the problem still persist . I already attach the debug log using "console loglevel debug" and post it at the jira, and I'm coordinating with the provider regarding Anthony's comment about the nat / firewall issue so i hope i could get some response from them. Thank you, -Pieter- Brian West wrote:
I also need you to do this call again with "console loglevel debug" on and post it attached to the jira and not inline on the comments please.
/b On Dec 22, 2008, at 7:19 AM, Pieter Eduard wrote:
Hi,
I have an enum number, if I call the number from any ip extension ( i use default enum.conf that points to e164.arpa) then the call goes well to my ATA that registers to my fs box, but if i try to call the number from PLMN, i get the ring at my ATA and if i pick it up, there's no sound.
here's my public.xml config :
<extension name="enum"> <condition field="destination_number" expression="^12345678"> <action application="set" data="proxy_media=true"/> <action application="bridge" data="sofia/default/ 1000%1.2.3.4"/> </condition> </extension>
For more detailed debug log, i already submit it on jira : http://jira.freeswitch.org/browse/MODAPP-186
regards,
-Pieter-
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
First off you opened a jira and assigned it to yourself.. not exactly the best way to get it fixed.. secondly what is a PLMN in this context? ... Thirdly... if you notice the bye is sent three times which is a big indication that you have a nat problem since its never ACK'ed. Gather up a pcap and attach it to the bug along with a console log on "console loglevel debug" attached... please do not paste them inline. /b On Dec 22, 2008, at 10:00 PM, Pieter Eduard wrote:
Hi Brian,
I already update the fs to FreeSWITCH Version 1.0.trunk (10906M), and the problem still persist . I already attach the debug log using "console loglevel debug" and post it at the jira, and I'm coordinating with the provider regarding Anthony's comment about the nat / firewall issue so i hope i could get some response from them.
Thank you,
-Pieter-
Hi Brian, sorry about the jira, i closed the too much inline log and gonna open a new one after i have some results along with the wireshark dump test. thank you, -Pieter- Brian West wrote:
First off you opened a jira and assigned it to yourself.. not exactly the best way to get it fixed.. secondly what is a PLMN in this context? ... Thirdly... if you notice the bye is sent three times which is a big indication that you have a nat problem since its never ACK'ed. Gather up a pcap and attach it to the bug along with a console log on "console loglevel debug" attached... please do not paste them inline.
/b
On Dec 22, 2008, at 10:00 PM, Pieter Eduard wrote:
Hi Brian,
I already update the fs to FreeSWITCH Version 1.0.trunk (10906M), and the problem still persist . I already attach the debug log using "console loglevel debug" and post it at the jira, and I'm coordinating with the provider regarding Anthony's comment about the nat / firewall issue so i hope i could get some response from them.
Thank you,
-Pieter-
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Na no need to close it... we can just attach everything to the existing jira. ;) /b On Dec 22, 2008, at 10:27 PM, Pieter Eduard wrote:
Hi Brian,
sorry about the jira, i closed the too much inline log and gonna open a new one after i have some results along with the wireshark dump test.
thank you,
-Pieter-
participants (2)
-
Brian West
-
Pieter Eduard