Hello, I am running FreeSWITCH Version 1.0.head (git-06988e1 2011-02-20 15-10-02 -0600) and have some problem with conference module and respective control actions digits. To give you an overview of how it is configured, there is lua script fired in public.xml. The script checks pin code, conf room and at the end run "session:execute("conference", string.format("%s@fsconf", conf_num))". Now coming back to the problem, there are few scenations i would like to cover. 1. When two or more people are in conference and one of them is trying to push # button (RFC2833) then that person is leaving the conference and is hanged up (not released, no BYE). The person who left the conference cannot join again or perform other actions without making the same phone call again. 2011-03-02 11:42:08.863139 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 11:42:12.283051 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 11:42:12.323050 [DEBUG] mod_conference.c:2659 Channel leaving conference, cause: NONE 2. The same as above, but * digit is entered. The person is muted and then unmuted. Next try with * fires muted but this is the point where the problem manifest itself. The procedure of unmuting UA fails. Below you may find relevant logs. The UA is pressing * but without success (no RTP RECV DTMF *). freeswitch@internal> 2011-03-02 11:51:13.423651 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:13.443650 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play 2011-03-02 11:51:18.163532 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:544 2011-03-02 11:51:18.183531 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-unmuted.wav' for play 2011-03-02 11:51:23.763391 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:23.783390 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play 3. The same as above but with 0 digit 2011-03-02 12:04:21.064862 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:04:22.863736 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 0:880 2011-03-02 12:04:22.883736 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play then i cannot get back to the conference 4. The as above but with 6 digit 2011-03-02 12:15:03.244609 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:15:21.602919 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:504 2011-03-02 12:15:22.602893 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:800 2011-03-02 12:15:24.263851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:864 I have disabled all control digits, but the problem still persist. No action is fired but is looks like UA is being muted (micro is off, but i can hear the other person). 2011-03-02 12:24:05.322935 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:24:08.663851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:11.223787 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:504 2011-03-02 12:24:13.703725 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:16.043666 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:520 Has anybody similar experience or know where the problem may be located. Regards, Maciej
If you exit the conference (#) the user will still be in your lua script, so you would have to do whatever you want it to (hangup maybe). I think the recommended way is to transfer away the call to the conference, that way the Lua scripts won't need to do any more processing. Also check this Javascript example on the wiki: http://wiki.freeswitch.org/wiki/Examples_JavaScript_Conference_IVR About DTMF's - if you don't see them in your log, then FS havn't received any digits - you would have to do a packet capture and check the RTP packets. /Peter -----Ursprungligt meddelande----- Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Maciej Bylica Skickat: den 2 mars 2011 12:31 Till: FreeSWITCH Users Help Ämne: [Freeswitch-users] Conference - control actions problem Hello, I am running FreeSWITCH Version 1.0.head (git-06988e1 2011-02-20 15-10-02 -0600) and have some problem with conference module and respective control actions digits. To give you an overview of how it is configured, there is lua script fired in public.xml. The script checks pin code, conf room and at the end run "session:execute("conference", string.format("%s@fsconf", conf_num))". Now coming back to the problem, there are few scenations i would like to cover. 1. When two or more people are in conference and one of them is trying to push # button (RFC2833) then that person is leaving the conference and is hanged up (not released, no BYE). The person who left the conference cannot join again or perform other actions without making the same phone call again. 2011-03-02 11:42:08.863139 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 11:42:12.283051 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 11:42:12.323050 [DEBUG] mod_conference.c:2659 Channel leaving conference, cause: NONE 2. The same as above, but * digit is entered. The person is muted and then unmuted. Next try with * fires muted but this is the point where the problem manifest itself. The procedure of unmuting UA fails. Below you may find relevant logs. The UA is pressing * but without success (no RTP RECV DTMF *). freeswitch@internal> 2011-03-02 11:51:13.423651 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:13.443650 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play 2011-03-02 11:51:18.163532 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:544 2011-03-02 11:51:18.183531 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-unmuted.wav' for play 2011-03-02 11:51:23.763391 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:23.783390 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play 3. The same as above but with 0 digit 2011-03-02 12:04:21.064862 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:04:22.863736 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 0:880 2011-03-02 12:04:22.883736 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play then i cannot get back to the conference 4. The as above but with 6 digit 2011-03-02 12:15:03.244609 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:15:21.602919 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:504 2011-03-02 12:15:22.602893 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:800 2011-03-02 12:15:24.263851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:864 I have disabled all control digits, but the problem still persist. No action is fired but is looks like UA is being muted (micro is off, but i can hear the other person). 2011-03-02 12:24:05.322935 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:24:08.663851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:11.223787 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:504 2011-03-02 12:24:13.703725 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:16.043666 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:520 Has anybody similar experience or know where the problem may be located. Regards, Maciej _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org !DSPAM:4d6e2bb232761664219435!
Thx Peter for prompt reply. I've just made one more configuration change. There are no lua script fired anymore, just pure conference application like following: <action application="conference" data="1000@fsconf"/> The effect is the same (after pressing * or # key just one time). 2011-03-02 16:55:32.677018 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:520 or later 2011-03-02 16:58:13.645012 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:620 As you can see there are DTMF detected on Freeswitch interpreted as 'RTP RECV DTMF' Is git-06988e1 rel stable one? Regards, Maciej 2011/3/2 Peter Olsson <peter.olsson@visionutveckling.se>:
If you exit the conference (#) the user will still be in your lua script, so you would have to do whatever you want it to (hangup maybe). I think the recommended way is to transfer away the call to the conference, that way the Lua scripts won't need to do any more processing.
Also check this Javascript example on the wiki: http://wiki.freeswitch.org/wiki/Examples_JavaScript_Conference_IVR
About DTMF's - if you don't see them in your log, then FS havn't received any digits - you would have to do a packet capture and check the RTP packets.
/Peter
-----Ursprungligt meddelande----- Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Maciej Bylica Skickat: den 2 mars 2011 12:31 Till: FreeSWITCH Users Help Ämne: [Freeswitch-users] Conference - control actions problem
Hello,
I am running FreeSWITCH Version 1.0.head (git-06988e1 2011-02-20 15-10-02 -0600) and have some problem with conference module and respective control actions digits. To give you an overview of how it is configured, there is lua script fired in public.xml. The script checks pin code, conf room and at the end run "session:execute("conference", string.format("%s@fsconf", conf_num))". Now coming back to the problem, there are few scenations i would like to cover.
1. When two or more people are in conference and one of them is trying to push # button (RFC2833) then that person is leaving the conference and is hanged up (not released, no BYE). The person who left the conference cannot join again or perform other actions without making the same phone call again.
2011-03-02 11:42:08.863139 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 11:42:12.283051 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 11:42:12.323050 [DEBUG] mod_conference.c:2659 Channel leaving conference, cause: NONE
2. The same as above, but * digit is entered. The person is muted and then unmuted. Next try with * fires muted but this is the point where the problem manifest itself. The procedure of unmuting UA fails. Below you may find relevant logs. The UA is pressing * but without success (no RTP RECV DTMF *).
freeswitch@internal> 2011-03-02 11:51:13.423651 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:13.443650 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play 2011-03-02 11:51:18.163532 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:544 2011-03-02 11:51:18.183531 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-unmuted.wav' for play 2011-03-02 11:51:23.763391 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:23.783390 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play
3. The same as above but with 0 digit
2011-03-02 12:04:21.064862 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:04:22.863736 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 0:880 2011-03-02 12:04:22.883736 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play
then i cannot get back to the conference
4. The as above but with 6 digit
2011-03-02 12:15:03.244609 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:15:21.602919 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:504 2011-03-02 12:15:22.602893 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:800 2011-03-02 12:15:24.263851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:864
I have disabled all control digits, but the problem still persist. No action is fired but is looks like UA is being muted (micro is off, but i can hear the other person). 2011-03-02 12:24:05.322935 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:24:08.663851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:11.223787 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:504 2011-03-02 12:24:13.703725 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:16.043666 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:520
Has anybody similar experience or know where the problem may be located.
Regards, Maciej
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
!DSPAM:4d6e2bb232761664219435!
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hmm - I'm not really sure what your problem is. You receive DTMF, but nothing happens anyway, or what? Latest git HEAD is stable, so you should be ok. Could you describe exactly what the problem is after sending a DTMF? /Peter -----Ursprungligt meddelande----- Från: Maciej Bylica [mailto:mbsip@gazeta.pl] Skickat: den 2 mars 2011 17:15 Till: FreeSWITCH Users Help Kopia: Peter Olsson Ämne: Re: [Freeswitch-users] Conference - control actions problem Thx Peter for prompt reply. I've just made one more configuration change. There are no lua script fired anymore, just pure conference application like following: <action application="conference" data="1000@fsconf"/> The effect is the same (after pressing * or # key just one time). 2011-03-02 16:55:32.677018 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:520 or later 2011-03-02 16:58:13.645012 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:620 As you can see there are DTMF detected on Freeswitch interpreted as 'RTP RECV DTMF' Is git-06988e1 rel stable one? Regards, Maciej 2011/3/2 Peter Olsson <peter.olsson@visionutveckling.se>:
If you exit the conference (#) the user will still be in your lua script, so you would have to do whatever you want it to (hangup maybe). I think the recommended way is to transfer away the call to the conference, that way the Lua scripts won't need to do any more processing.
Also check this Javascript example on the wiki: http://wiki.freeswitch.org/wiki/Examples_JavaScript_Conference_IVR
About DTMF's - if you don't see them in your log, then FS havn't received any digits - you would have to do a packet capture and check the RTP packets.
/Peter
-----Ursprungligt meddelande----- Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Maciej Bylica Skickat: den 2 mars 2011 12:31 Till: FreeSWITCH Users Help Ämne: [Freeswitch-users] Conference - control actions problem
Hello,
I am running FreeSWITCH Version 1.0.head (git-06988e1 2011-02-20 15-10-02 -0600) and have some problem with conference module and respective control actions digits. To give you an overview of how it is configured, there is lua script fired in public.xml. The script checks pin code, conf room and at the end run "session:execute("conference", string.format("%s@fsconf", conf_num))". Now coming back to the problem, there are few scenations i would like to cover.
1. When two or more people are in conference and one of them is trying to push # button (RFC2833) then that person is leaving the conference and is hanged up (not released, no BYE). The person who left the conference cannot join again or perform other actions without making the same phone call again.
2011-03-02 11:42:08.863139 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 11:42:12.283051 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 11:42:12.323050 [DEBUG] mod_conference.c:2659 Channel leaving conference, cause: NONE
2. The same as above, but * digit is entered. The person is muted and then unmuted. Next try with * fires muted but this is the point where the problem manifest itself. The procedure of unmuting UA fails. Below you may find relevant logs. The UA is pressing * but without success (no RTP RECV DTMF *).
freeswitch@internal> 2011-03-02 11:51:13.423651 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:13.443650 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play 2011-03-02 11:51:18.163532 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:544 2011-03-02 11:51:18.183531 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-unmuted.wav' for play 2011-03-02 11:51:23.763391 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:23.783390 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play
3. The same as above but with 0 digit
2011-03-02 12:04:21.064862 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:04:22.863736 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 0:880 2011-03-02 12:04:22.883736 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play
then i cannot get back to the conference
4. The as above but with 6 digit
2011-03-02 12:15:03.244609 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:15:21.602919 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:504 2011-03-02 12:15:22.602893 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:800 2011-03-02 12:15:24.263851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:864
I have disabled all control digits, but the problem still persist. No action is fired but is looks like UA is being muted (micro is off, but i can hear the other person). 2011-03-02 12:24:05.322935 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:24:08.663851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:11.223787 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:504 2011-03-02 12:24:13.703725 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:16.043666 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:520
Has anybody similar experience or know where the problem may be located.
Regards, Maciej
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
!DSPAM:4d6e6c8a32761758178328!
Hi, As stated in first email control action digits does not behave as they should. Then it turned out that I have the same issue when these actions are disabled. Once again, lets assume that UA1 and UA2 are in conf room. UA1 is pressing any digit (let say '5') and as a aftereffect it looks like UA1 has microphone muted - so cannot be heard by UA2. Furthermore no consecutive dtmfs coming from UA1 are collected. The only wayout is to hang up the phone and dial again. Thanks, Maciej
Hmm - I'm not really sure what your problem is. You receive DTMF, but nothing happens anyway, or what?
Latest git HEAD is stable, so you should be ok.
Could you describe exactly what the problem is after sending a DTMF?
/Peter
-----Ursprungligt meddelande----- Från: Maciej Bylica [mailto:mbsip@gazeta.pl] Skickat: den 2 mars 2011 17:15 Till: FreeSWITCH Users Help Kopia: Peter Olsson Ämne: Re: [Freeswitch-users] Conference - control actions problem
Thx Peter for prompt reply.
I've just made one more configuration change. There are no lua script fired anymore, just pure conference application like following: <action application="conference" data="1000@fsconf"/>
The effect is the same (after pressing * or # key just one time). 2011-03-02 16:55:32.677018 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:520 or later 2011-03-02 16:58:13.645012 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:620
As you can see there are DTMF detected on Freeswitch interpreted as 'RTP RECV DTMF' Is git-06988e1 rel stable one?
Regards, Maciej
2011/3/2 Peter Olsson <peter.olsson@visionutveckling.se>:
If you exit the conference (#) the user will still be in your lua script, so you would have to do whatever you want it to (hangup maybe). I think the recommended way is to transfer away the call to the conference, that way the Lua scripts won't need to do any more processing.
Also check this Javascript example on the wiki: http://wiki.freeswitch.org/wiki/Examples_JavaScript_Conference_IVR
About DTMF's - if you don't see them in your log, then FS havn't received any digits - you would have to do a packet capture and check the RTP packets.
/Peter
-----Ursprungligt meddelande----- Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Maciej Bylica Skickat: den 2 mars 2011 12:31 Till: FreeSWITCH Users Help Ämne: [Freeswitch-users] Conference - control actions problem
Hello,
I am running FreeSWITCH Version 1.0.head (git-06988e1 2011-02-20 15-10-02 -0600) and have some problem with conference module and respective control actions digits. To give you an overview of how it is configured, there is lua script fired in public.xml. The script checks pin code, conf room and at the end run "session:execute("conference", string.format("%s@fsconf", conf_num))". Now coming back to the problem, there are few scenations i would like to cover.
1. When two or more people are in conference and one of them is trying to push # button (RFC2833) then that person is leaving the conference and is hanged up (not released, no BYE). The person who left the conference cannot join again or perform other actions without making the same phone call again.
2011-03-02 11:42:08.863139 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 11:42:12.283051 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 11:42:12.323050 [DEBUG] mod_conference.c:2659 Channel leaving conference, cause: NONE
2. The same as above, but * digit is entered. The person is muted and then unmuted. Next try with * fires muted but this is the point where the problem manifest itself. The procedure of unmuting UA fails. Below you may find relevant logs. The UA is pressing * but without success (no RTP RECV DTMF *).
freeswitch@internal> 2011-03-02 11:51:13.423651 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:13.443650 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play 2011-03-02 11:51:18.163532 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:544 2011-03-02 11:51:18.183531 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-unmuted.wav' for play 2011-03-02 11:51:23.763391 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:23.783390 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play
3. The same as above but with 0 digit
2011-03-02 12:04:21.064862 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:04:22.863736 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 0:880 2011-03-02 12:04:22.883736 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play
then i cannot get back to the conference
4. The as above but with 6 digit
2011-03-02 12:15:03.244609 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:15:21.602919 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:504 2011-03-02 12:15:22.602893 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:800 2011-03-02 12:15:24.263851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:864
I have disabled all control digits, but the problem still persist. No action is fired but is looks like UA is being muted (micro is off, but i can hear the other person). 2011-03-02 12:24:05.322935 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:24:08.663851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:11.223787 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:504 2011-03-02 12:24:13.703725 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:16.043666 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:520
Has anybody similar experience or know where the problem may be located.
Regards, Maciej
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
!DSPAM:4d6e6c8a32761758178328!
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Sounds really strange. This stuff has worked forever, and I'm not able to reproduce it in any way. Could you pastebin relevant parts of the config, conference.conf.xml and the dialplan + plus logs and examples for what goes wrong. /Peter -----Ursprungligt meddelande----- Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Maciej Bylica Skickat: den 3 mars 2011 11:07 Till: FreeSWITCH Users Help Ämne: Re: [Freeswitch-users] Conference - control actions problem Hi, As stated in first email control action digits does not behave as they should. Then it turned out that I have the same issue when these actions are disabled. Once again, lets assume that UA1 and UA2 are in conf room. UA1 is pressing any digit (let say '5') and as a aftereffect it looks like UA1 has microphone muted - so cannot be heard by UA2. Furthermore no consecutive dtmfs coming from UA1 are collected. The only wayout is to hang up the phone and dial again. Thanks, Maciej
Hmm - I'm not really sure what your problem is. You receive DTMF, but nothing happens anyway, or what?
Latest git HEAD is stable, so you should be ok.
Could you describe exactly what the problem is after sending a DTMF?
/Peter
-----Ursprungligt meddelande----- Från: Maciej Bylica [mailto:mbsip@gazeta.pl] Skickat: den 2 mars 2011 17:15 Till: FreeSWITCH Users Help Kopia: Peter Olsson Ämne: Re: [Freeswitch-users] Conference - control actions problem
Thx Peter for prompt reply.
I've just made one more configuration change. There are no lua script fired anymore, just pure conference application like following: <action application="conference" data="1000@fsconf"/>
The effect is the same (after pressing * or # key just one time). 2011-03-02 16:55:32.677018 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:520 or later 2011-03-02 16:58:13.645012 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:620
As you can see there are DTMF detected on Freeswitch interpreted as 'RTP RECV DTMF' Is git-06988e1 rel stable one?
Regards, Maciej
2011/3/2 Peter Olsson <peter.olsson@visionutveckling.se>:
If you exit the conference (#) the user will still be in your lua script, so you would have to do whatever you want it to (hangup maybe). I think the recommended way is to transfer away the call to the conference, that way the Lua scripts won't need to do any more processing.
Also check this Javascript example on the wiki: http://wiki.freeswitch.org/wiki/Examples_JavaScript_Conference_IVR
About DTMF's - if you don't see them in your log, then FS havn't received any digits - you would have to do a packet capture and check the RTP packets.
/Peter
-----Ursprungligt meddelande----- Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Maciej Bylica Skickat: den 2 mars 2011 12:31 Till: FreeSWITCH Users Help Ämne: [Freeswitch-users] Conference - control actions problem
Hello,
I am running FreeSWITCH Version 1.0.head (git-06988e1 2011-02-20 15-10-02 -0600) and have some problem with conference module and respective control actions digits. To give you an overview of how it is configured, there is lua script fired in public.xml. The script checks pin code, conf room and at the end run "session:execute("conference", string.format("%s@fsconf", conf_num))". Now coming back to the problem, there are few scenations i would like to cover.
1. When two or more people are in conference and one of them is trying to push # button (RFC2833) then that person is leaving the conference and is hanged up (not released, no BYE). The person who left the conference cannot join again or perform other actions without making the same phone call again.
2011-03-02 11:42:08.863139 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 11:42:12.283051 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 11:42:12.323050 [DEBUG] mod_conference.c:2659 Channel leaving conference, cause: NONE
2. The same as above, but * digit is entered. The person is muted and then unmuted. Next try with * fires muted but this is the point where the problem manifest itself. The procedure of unmuting UA fails. Below you may find relevant logs. The UA is pressing * but without success (no RTP RECV DTMF *).
freeswitch@internal> 2011-03-02 11:51:13.423651 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:13.443650 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play 2011-03-02 11:51:18.163532 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:544 2011-03-02 11:51:18.183531 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-unmuted.wav' for play 2011-03-02 11:51:23.763391 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:23.783390 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play
3. The same as above but with 0 digit
2011-03-02 12:04:21.064862 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:04:22.863736 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 0:880 2011-03-02 12:04:22.883736 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play
then i cannot get back to the conference
4. The as above but with 6 digit
2011-03-02 12:15:03.244609 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:15:21.602919 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:504 2011-03-02 12:15:22.602893 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:800 2011-03-02 12:15:24.263851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:864
I have disabled all control digits, but the problem still persist. No action is fired but is looks like UA is being muted (micro is off, but i can hear the other person). 2011-03-02 12:24:05.322935 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:24:08.663851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:11.223787 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:504 2011-03-02 12:24:13.703725 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:16.043666 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:520
Has anybody similar experience or know where the problem may be located.
Regards, Maciej
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org !DSPAM:4d6f6a0732761929213956!
I am also having strange problem with DTMFs after transfering last member out of conference back to my C# managed App- no more DTMFCallback to detect digits, but only on the last member out of the conf.. Seems like the last one keeps getting it's DTMF events trapped by mod_conference or FS. I just did a clean GIT clone from scratch a few hours ago. The transfer action control also hangs up the last caller as it has always done, so I have been using the Api. Something must have changed in the git in the past 1-2 weeks. ----- Original Message ----- From: "Maciej Bylica" <mbsip@gazeta.pl> To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Sent: Thursday, March 03, 2011 2:07 AM Subject: Re: [Freeswitch-users] Conference - control actions problem Hi, As stated in first email control action digits does not behave as they should. Then it turned out that I have the same issue when these actions are disabled. Once again, lets assume that UA1 and UA2 are in conf room. UA1 is pressing any digit (let say '5') and as a aftereffect it looks like UA1 has microphone muted - so cannot be heard by UA2. Furthermore no consecutive dtmfs coming from UA1 are collected. The only wayout is to hang up the phone and dial again. Thanks, Maciej
Hmm - I'm not really sure what your problem is. You receive DTMF, but nothing happens anyway, or what?
Latest git HEAD is stable, so you should be ok.
Could you describe exactly what the problem is after sending a DTMF?
/Peter
-----Ursprungligt meddelande----- Från: Maciej Bylica [mailto:mbsip@gazeta.pl] Skickat: den 2 mars 2011 17:15 Till: FreeSWITCH Users Help Kopia: Peter Olsson Ämne: Re: [Freeswitch-users] Conference - control actions problem
Thx Peter for prompt reply.
I've just made one more configuration change. There are no lua script fired anymore, just pure conference application like following: <action application="conference" data="1000@fsconf"/>
The effect is the same (after pressing * or # key just one time). 2011-03-02 16:55:32.677018 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:520 or later 2011-03-02 16:58:13.645012 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:620
As you can see there are DTMF detected on Freeswitch interpreted as 'RTP RECV DTMF' Is git-06988e1 rel stable one?
Regards, Maciej
2011/3/2 Peter Olsson <peter.olsson@visionutveckling.se>:
If you exit the conference (#) the user will still be in your lua script, so you would have to do whatever you want it to (hangup maybe). I think the recommended way is to transfer away the call to the conference, that way the Lua scripts won't need to do any more processing.
Also check this Javascript example on the wiki: http://wiki.freeswitch.org/wiki/Examples_JavaScript_Conference_IVR
About DTMF's - if you don't see them in your log, then FS havn't received any digits - you would have to do a packet capture and check the RTP packets.
/Peter
-----Ursprungligt meddelande----- Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Maciej Bylica Skickat: den 2 mars 2011 12:31 Till: FreeSWITCH Users Help Ämne: [Freeswitch-users] Conference - control actions problem
Hello,
I am running FreeSWITCH Version 1.0.head (git-06988e1 2011-02-20 15-10-02 -0600) and have some problem with conference module and respective control actions digits. To give you an overview of how it is configured, there is lua script fired in public.xml. The script checks pin code, conf room and at the end run "session:execute("conference", string.format("%s@fsconf", conf_num))". Now coming back to the problem, there are few scenations i would like to cover.
1. When two or more people are in conference and one of them is trying to push # button (RFC2833) then that person is leaving the conference and is hanged up (not released, no BYE). The person who left the conference cannot join again or perform other actions without making the same phone call again.
2011-03-02 11:42:08.863139 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 11:42:12.283051 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 11:42:12.323050 [DEBUG] mod_conference.c:2659 Channel leaving conference, cause: NONE
2. The same as above, but * digit is entered. The person is muted and then unmuted. Next try with * fires muted but this is the point where the problem manifest itself. The procedure of unmuting UA fails. Below you may find relevant logs. The UA is pressing * but without success (no RTP RECV DTMF *).
freeswitch@internal> 2011-03-02 11:51:13.423651 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:13.443650 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play 2011-03-02 11:51:18.163532 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:544 2011-03-02 11:51:18.183531 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-unmuted.wav' for play 2011-03-02 11:51:23.763391 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF *:504 2011-03-02 11:51:23.783390 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play
3. The same as above but with 0 digit
2011-03-02 12:04:21.064862 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:04:22.863736 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 0:880 2011-03-02 12:04:22.883736 [DEBUG] mod_conference.c:3125 Queueing file '/usr/local/freeswitch/sounds/en/us/callie/conference/conf-muted.wav' for play
then i cannot get back to the conference
4. The as above but with 6 digit
2011-03-02 12:15:03.244609 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:15:21.602919 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:504 2011-03-02 12:15:22.602893 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:800 2011-03-02 12:15:24.263851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF 6:864
I have disabled all control digits, but the problem still persist. No action is fired but is looks like UA is being muted (micro is off, but i can hear the other person). 2011-03-02 12:24:05.322935 [DEBUG] mod_conference.c:2414 Setup timer soft success interval: 20 samples: 160 2011-03-02 12:24:08.663851 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:11.223787 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:504 2011-03-02 12:24:13.703725 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:480 2011-03-02 12:24:16.043666 [DEBUG] switch_rtp.c:3237 RTP RECV DTMF #:520
Has anybody similar experience or know where the problem may be located.
Regards, Maciej
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
!DSPAM:4d6e6c8a32761758178328!
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Thu, Mar 3, 2011 at 4:56 AM, Kris <kris@livecall.com> wrote:
I am also having strange problem with DTMFs after transfering last member out of conference back to my C# managed App- no more DTMFCallback to detect digits, but only on the last member out of the conf.. Seems like the last one keeps getting it's DTMF events trapped by mod_conference or FS. I just did a clean GIT clone from scratch a few hours ago. The transfer action control also hangs up the last caller as it has always done, so I have been using the Api. Something must have changed in the git in the past 1-2 weeks.
Please find the last known git release where it worked and/or the first git release where it broke. Then open a Jira and supply a sample config/script/etc. that will allow the devs to recreate this issue. -MC
I am not sure..I think I did an update around 1/24 which was working then about 2/19 and 2/28, but my own code was butchered at the time and I thought the git updates were also butchering FS, that's why I did the clean clone about midnight. Sometime1/24 to now... It seems if I let the prompt finish and go into GetDigits, the digit comes through. If the digit is pressed during play is when the callback is not called by FS--BUT...if I press really fast..2-3 times a second, I get the digit most likely because it goes into GetDigit(). I will probably forget about the callback and try to get the digit by subscribing to the DTMF event. ----- Original Message ----- From: "Michael Collins" <msc@freeswitch.org> To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Sent: Thursday, March 03, 2011 10:16 AM Subject: Re: [Freeswitch-users] Conference - control actions problem
On Thu, Mar 3, 2011 at 4:56 AM, Kris <kris@livecall.com> wrote:
I am also having strange problem with DTMFs after transfering last member out of conference back to my C# managed App- no more DTMFCallback to detect digits, but only on the last member out of the conf.. Seems like the last one keeps getting it's DTMF events trapped by mod_conference or FS. I just did a clean GIT clone from scratch a few hours ago. The transfer action control also hangs up the last caller as it has always done, so I have been using the Api. Something must have changed in the git in the past 1-2 weeks.
Please find the last known git release where it worked and/or the first git release where it broke. Then open a Jira and supply a sample config/script/etc. that will allow the devs to recreate this issue.
-MC
participants (4)
-
Kris
-
Maciej Bylica
-
Michael Collins
-
Peter Olsson