FreeSWITCH 1.0.4 windows installer - great but I have a little problem
I had the sweet surprise to find the installer packaged with FreePBX... really great! Why it has not been advertised as it deserves? It worked like a breeze once launched, with the automatic configuration and all of that., Only thing: once stopped I cannot get it to load sofia profiles anymore - issueing sofia status doesn't show anything. I had to copy internal.xml and default.xml from a previous installation and everything got to work again - but no FreePBX anymore :( I'm sure I'm missing something important. Can you give me a hint? Should sofia profiles be served by curl or something? Thanks, Raffaele
When you configure FreePBX for the first time it wipes out the sip_profiles directory. If you follow the FreePBX shortcut on your desktop it'll mention this on the last screen of the configuration. You might see something such as the following below. If you plan to use FreePBX you'll need to define trunk groups, trunks, etc in order to have the sip_profiles directory populated. regards, Carlos Incompatible ConfigurationWARNING: THE FOLLOWING FILES WILL BE DELETED! - D:/FreeSWITCH/conf/sip_profiles/external.xml - D:/FreeSWITCH/conf/sip_profiles/internal-ipv6.xml - D:/FreeSWITCH/conf/sip_profiles/internal.xml On Sun, Aug 16, 2009 at 4:43 AM, Raffaele P. Guidi < raffaele.p.guidi@gmail.com> wrote:
I had the sweet surprise to find the installer packaged with FreePBX... really great! Why it has not been advertised as it deserves? It worked like a breeze once launched, with the automatic configuration and all of that., Only thing: once stopped I cannot get it to load sofia profiles anymore - issueing sofia status doesn't show anything. I had to copy internal.xml and default.xml from a previous installation and everything got to work again - but no FreePBX anymore :( I'm sure I'm missing something important. Can you give me a hint? Should sofia profiles be served by curl or something?
Thanks, Raffaele
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Actually I did that and it worked fine. I had the problem the SECOND time I run FS and freepbx. And (@Brian) mod_sofia was loaded but sip_profiles were not On Sun, Aug 16, 2009 at 16:04, Carlos Talbot <carlos.talbot@gmail.com>wrote:
When you configure FreePBX for the first time it wipes out the sip_profiles directory. If you follow the FreePBX shortcut on your desktop it'll mention this on the last screen of the configuration. You might see something such as the following below. If you plan to use FreePBX you'll need to define trunk groups, trunks, etc in order to have the sip_profiles directory populated. regards,
Carlos
Incompatible Configuration WARNING: THE FOLLOWING FILES WILL BE DELETED!
- D:/FreeSWITCH/conf/sip_profiles/external.xml - D:/FreeSWITCH/conf/sip_profiles/internal-ipv6.xml - D:/FreeSWITCH/conf/sip_profiles/internal.xml
On Sun, Aug 16, 2009 at 4:43 AM, Raffaele P. Guidi < raffaele.p.guidi@gmail.com> wrote:
I had the sweet surprise to find the installer packaged with FreePBX... really great! Why it has not been advertised as it deserves? It worked like a breeze once launched, with the automatic configuration and all of that., Only thing: once stopped I cannot get it to load sofia profiles anymore - issueing sofia status doesn't show anything. I had to copy internal.xml and default.xml from a previous installation and everything got to work again - but no FreePBX anymore :( I'm sure I'm missing something important. Can you give me a hint? Should sofia profiles be served by curl or something?
Thanks, Raffaele
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
actually I meant "the SECOND time I *RAN* FS and freepbx." On Mon, Aug 24, 2009 at 20:24, Raffaele P. Guidi <raffaele.p.guidi@gmail.com
wrote:
Actually I did that and it worked fine. I had the problem the SECOND time I run FS and freepbx. And (@Brian) mod_sofia was loaded but sip_profiles were not
On Sun, Aug 16, 2009 at 16:04, Carlos Talbot <carlos.talbot@gmail.com>wrote:
When you configure FreePBX for the first time it wipes out the sip_profiles directory. If you follow the FreePBX shortcut on your desktop it'll mention this on the last screen of the configuration. You might see something such as the following below. If you plan to use FreePBX you'll need to define trunk groups, trunks, etc in order to have the sip_profiles directory populated. regards,
Carlos
Incompatible Configuration WARNING: THE FOLLOWING FILES WILL BE DELETED!
- D:/FreeSWITCH/conf/sip_profiles/external.xml - D:/FreeSWITCH/conf/sip_profiles/internal-ipv6.xml - D:/FreeSWITCH/conf/sip_profiles/internal.xml
On Sun, Aug 16, 2009 at 4:43 AM, Raffaele P. Guidi < raffaele.p.guidi@gmail.com> wrote:
I had the sweet surprise to find the installer packaged with FreePBX... really great! Why it has not been advertised as it deserves? It worked like a breeze once launched, with the automatic configuration and all of that., Only thing: once stopped I cannot get it to load sofia profiles anymore - issueing sofia status doesn't show anything. I had to copy internal.xml and default.xml from a previous installation and everything got to work again - but no FreePBX anymore :( I'm sure I'm missing something important. Can you give me a hint? Should sofia profiles be served by curl or something?
Thanks, Raffaele
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
If you installed FreePBX then it would be that softwares job to manage the sofia profiles... wouldn't it? /b On Aug 24, 2009, at 1:24 PM, Raffaele P. Guidi wrote:
Actually I did that and it worked fine. I had the problem the SECOND time I run FS and freepbx. And (@Brian) mod_sofia was loaded but sip_profiles were not
This is what I was asking! :D When the installer finished it started the whole thing and everything got loaded fine, but when I restarted my system it didn't (and did not anymore). Well, I will try to install everything from scratch again and see... On Mon, Aug 24, 2009 at 20:30, Brian West <brian@freeswitch.org> wrote:
If you installed FreePBX then it would be that softwares job to manage the sofia profiles... wouldn't it?
/b
On Aug 24, 2009, at 1:24 PM, Raffaele P. Guidi wrote:
Actually I did that and it worked fine. I had the problem the SECOND time I run FS and freepbx. And (@Brian) mod_sofia was loaded but sip_profiles were not
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Windows installer does not work for me. I've reinstalled various times, same results. I can correctly create a number, but when I try to create a device for that number, it tells me that cannot locate the device, and the password for vicemail will be invalid. After that, it begins to give the php error page, it cannot find the start < tag in directory/default.xml Also for me there are no sofia profiles... So, I cannot start to test it (eg: I would like to add mod_skypiax support to it). Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618 On Tue, Aug 25, 2009 at 12:06 AM, Raffaele P. Guidi<raffaele.p.guidi@gmail.com> wrote:
This is what I was asking! :D When the installer finished it started the whole thing and everything got loaded fine, but when I restarted my system it didn't (and did not anymore). Well, I will try to install everything from scratch again and see...
On Mon, Aug 24, 2009 at 20:30, Brian West <brian@freeswitch.org> wrote:
If you installed FreePBX then it would be that softwares job to manage the sofia profiles... wouldn't it?
/b
On Aug 24, 2009, at 1:24 PM, Raffaele P. Guidi wrote:
Actually I did that and it worked fine. I had the problem the SECOND time I run FS and freepbx. And (@Brian) mod_sofia was loaded but sip_profiles were not
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Giovanni, you mean like this message? "Unable to determine location for device. Voicemail password set via FreePBX will not be valid." This is a known FreePBX issue. http://www.freepbx.org/v3/ticket/36 Let's keep in ming FreePBX v3 is a developer release and as such many features are in flux and might not work. That being said there some features in the Windows build that still do not work. The biggest one right now is the lack of the php ESL library for Windows which affects the voicemail app. I'm trying to get this to compile but it's been difficult. I do include the .svn files with the FreePBX install so you can freely install TortoiseSVN and update FreePBX at your leisure. With regards to the sip_profiles, did you create a trunk group and trunk? regards, Carlos On Mon, Aug 24, 2009 at 9:56 PM, Giovanni Maruzzelli <gmaruzz@celliax.org>wrote:
Windows installer does not work for me.
I've reinstalled various times, same results.
I can correctly create a number, but when I try to create a device for that number, it tells me that cannot locate the device, and the password for vicemail will be invalid.
After that, it begins to give the php error page, it cannot find the start < tag in directory/default.xml
Also for me there are no sofia profiles...
So, I cannot start to test it (eg: I would like to add mod_skypiax support to it).
Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
On Tue, Aug 25, 2009 at 12:06 AM, Raffaele P. Guidi<raffaele.p.guidi@gmail.com> wrote:
This is what I was asking! :D When the installer finished it started the whole thing and everything got loaded fine, but when I restarted my system it didn't (and did not anymore). Well, I will try to install everything from scratch again and see...
On Mon, Aug 24, 2009 at 20:30, Brian West <brian@freeswitch.org> wrote:
If you installed FreePBX then it would be that softwares job to manage the sofia profiles... wouldn't it?
/b
On Aug 24, 2009, at 1:24 PM, Raffaele P. Guidi wrote:
Actually I did that and it worked fine. I had the problem the SECOND time I run FS and freepbx. And (@Brian) mod_sofia was loaded but sip_profiles were not
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Is FreePBX V3 based on Freeswitch? Michael DiMartino | Director of IT | Open Access, Inc. 115 Bi County Blvd | Farmingdale, NY 11735 631.227.1034| 631.694.6730 FAX |631.988.6060 MOBILE www.openaccessinc.com From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Carlos Talbot Sent: Tuesday, August 25, 2009 2:07 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FreeSWITCH 1.0.4 windows installer - great but I have a little problem Giovanni, you mean like this message? "Unable to determine location for device. Voicemail password set via FreePBX will not be valid." This is a known FreePBX issue. http://www.freepbx.org/v3/ticket/36 Let's keep in ming FreePBX v3 is a developer release and as such many features are in flux and might not work. That being said there some features in the Windows build that still do not work. The biggest one right now is the lack of the php ESL library for Windows which affects the voicemail app. I'm trying to get this to compile but it's been difficult. I do include the .svn files with the FreePBX install so you can freely install TortoiseSVN and update FreePBX at your leisure. With regards to the sip_profiles, did you create a trunk group and trunk? regards, Carlos On Mon, Aug 24, 2009 at 9:56 PM, Giovanni Maruzzelli <gmaruzz@celliax.org<mailto:gmaruzz@celliax.org>> wrote: Windows installer does not work for me. I've reinstalled various times, same results. I can correctly create a number, but when I try to create a device for that number, it tells me that cannot locate the device, and the password for vicemail will be invalid. After that, it begins to give the php error page, it cannot find the start < tag in directory/default.xml Also for me there are no sofia profiles... So, I cannot start to test it (eg: I would like to add mod_skypiax support to it). Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618 On Tue, Aug 25, 2009 at 12:06 AM, Raffaele P. Guidi<raffaele.p.guidi@gmail.com<mailto:raffaele.p.guidi@gmail.com>> wrote:
This is what I was asking! :D When the installer finished it started the whole thing and everything got loaded fine, but when I restarted my system it didn't (and did not anymore). Well, I will try to install everything from scratch again and see...
On Mon, Aug 24, 2009 at 20:30, Brian West <brian@freeswitch.org<mailto:brian@freeswitch.org>> wrote:
If you installed FreePBX then it would be that softwares job to manage the sofia profiles... wouldn't it?
/b
On Aug 24, 2009, at 1:24 PM, Raffaele P. Guidi wrote:
Actually I did that and it worked fine. I had the problem the SECOND time I run FS and freepbx. And (@Brian) mod_sofia was loaded but sip_profiles were not
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
yes, and will support Asterisk and other engines in the future. On Tue, Aug 25, 2009 at 8:20 PM, Michael Di Martino<mdm@openaccessinc.com> wrote:
Is FreePBX V3 based on Freeswitch?
Michael DiMartino | Director of IT | Open Access, Inc. 115 Bi County Blvd | Farmingdale, NY 11735 631.227.1034| 631.694.6730 FAX |631.988.6060 MOBILE
www.openaccessinc.com
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Carlos Talbot Sent: Tuesday, August 25, 2009 2:07 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FreeSWITCH 1.0.4 windows installer - great but I have a little problem
Giovanni,
you mean like this message?
"Unable to determine location for device. Voicemail password set via FreePBX will not be valid."
This is a known FreePBX issue. http://www.freepbx.org/v3/ticket/36
Let's keep in ming FreePBX v3 is a developer release and as such many features are in flux and might not work. That being said there some features in the Windows build that still do not work. The biggest one right now is the lack of the php ESL library for Windows which affects the voicemail app. I'm trying to get this to compile but it's been difficult.
I do include the .svn files with the FreePBX install so you can freely install TortoiseSVN and update FreePBX at your leisure.
With regards to the sip_profiles, did you create a trunk group and trunk?
regards,
Carlos
On Mon, Aug 24, 2009 at 9:56 PM, Giovanni Maruzzelli <gmaruzz@celliax.org> wrote:
Windows installer does not work for me.
I've reinstalled various times, same results.
I can correctly create a number, but when I try to create a device for that number, it tells me that cannot locate the device, and the password for vicemail will be invalid.
After that, it begins to give the php error page, it cannot find the start < tag in directory/default.xml
Also for me there are no sofia profiles...
So, I cannot start to test it (eg: I would like to add mod_skypiax support to it).
Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
On Tue, Aug 25, 2009 at 12:06 AM, Raffaele P.
Guidi<raffaele.p.guidi@gmail.com> wrote:
This is what I was asking! :D When the installer finished it started the whole thing and everything got loaded fine, but when I restarted my system it didn't (and did not anymore). Well, I will try to install everything from scratch again and see...
On Mon, Aug 24, 2009 at 20:30, Brian West <brian@freeswitch.org> wrote:
If you installed FreePBX then it would be that softwares job to manage the sofia profiles... wouldn't it?
/b
On Aug 24, 2009, at 1:24 PM, Raffaele P. Guidi wrote:
Actually I did that and it worked fine. I had the problem the SECOND time I run FS and freepbx. And (@Brian) mod_sofia was loaded but sip_profiles were not
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
It supports FreeSWITCH and soon other engines as well. More information is at: http://www.freepbx.org/freepbx-v3 Mike On Aug 25, 2009, at 2:20 PM, Michael Di Martino wrote:
Is FreePBX V3 based on Freeswitch?
Michael DiMartino | Director of IT | Open Access, Inc. 115 Bi County Blvd | Farmingdale, NY 11735 631.227.1034| 631.694.6730 FAX |631.988.6060 MOBILE www.openaccessinc.com
Carlos, you're very kind, as always. I'm aware that this is a dev preview, and I'm interested just in that, to begin getting acquainted with the framework (and adding support to the endpoints/trunk I take care of). I probably have not got the logic right :-) (I tried both Windows Installer and Linux ISO) I started fpbx with fs running, it works. I create a number, then I create a device and I connect it to that number. It works. If I restart FS, do not works anymore, complaining no sofia profiles.
From the front page of FPBX is not clear you *must* create a trunk/trunk group.
I was thinking trunks were for outgoing calls, or for receiving from external. I was just testing internal phones, trying an IVR, so I was thinking trunks were not needed. Can you explain to me? Thanks again, -giovanni Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618 On Tue, Aug 25, 2009 at 8:06 PM, Carlos Talbot<carlos.talbot@gmail.com> wrote:
Giovanni, you mean like this message? "Unable to determine location for device. Voicemail password set via FreePBX will not be valid." This is a known FreePBX issue. http://www.freepbx.org/v3/ticket/36 Let's keep in ming FreePBX v3 is a developer release and as such many features are in flux and might not work. That being said there some features in the Windows build that still do not work. The biggest one right now is the lack of the php ESL library for Windows which affects the voicemail app. I'm trying to get this to compile but it's been difficult. I do include the .svn files with the FreePBX install so you can freely install TortoiseSVN and update FreePBX at your leisure. With regards to the sip_profiles, did you create a trunk group and trunk? regards, Carlos
On Mon, Aug 24, 2009 at 9:56 PM, Giovanni Maruzzelli <gmaruzz@celliax.org> wrote:
Windows installer does not work for me.
I've reinstalled various times, same results.
I can correctly create a number, but when I try to create a device for that number, it tells me that cannot locate the device, and the password for vicemail will be invalid.
After that, it begins to give the php error page, it cannot find the start < tag in directory/default.xml
Also for me there are no sofia profiles...
So, I cannot start to test it (eg: I would like to add mod_skypiax support to it).
Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
On Tue, Aug 25, 2009 at 12:06 AM, Raffaele P. Guidi<raffaele.p.guidi@gmail.com> wrote:
This is what I was asking! :D When the installer finished it started the whole thing and everything got loaded fine, but when I restarted my system it didn't (and did not anymore). Well, I will try to install everything from scratch again and see...
On Mon, Aug 24, 2009 at 20:30, Brian West <brian@freeswitch.org> wrote:
If you installed FreePBX then it would be that softwares job to manage the sofia profiles... wouldn't it?
/b
On Aug 24, 2009, at 1:24 PM, Raffaele P. Guidi wrote:
Actually I did that and it worked fine. I had the problem the SECOND time I run FS and freepbx. And (@Brian) mod_sofia was loaded but sip_profiles were not
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
This would be a question for Darren and the FreePBX group. :) I guess it does not help that the *User Documentation* link on this page is currently empty: http://www.freepbx.org/v3/wiki/ If you note the message during FreePBX initialization *all* files in the sip_profiles directory are removed (including internal*.xml). This causes 'sofia status' to come back empty. Incompatible ConfigurationWARNING: THE FOLLOWING FILES WILL BE DELETED! - D:/FreeSWITCH/conf/sip_profiles/external.xml - D:/FreeSWITCH/conf/sip_profiles/internal-ipv6.xml - D:/FreeSWITCH/conf/sip_profiles/internal.xml regards, Carlos On Tue, Aug 25, 2009 at 1:28 PM, Giovanni Maruzzelli <gmaruzz@celliax.org> wrote:
From the front page of FPBX is not clear you *must* create a trunk/trunk group.
I was thinking trunks were for outgoing calls, or for receiving from external.
I was just testing internal phones, trying an IVR, so I was thinking trunks were not needed.
Can you explain to me?
Thanks again,
-giovanni
Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
On Tue, Aug 25, 2009 at 8:06 PM, Carlos Talbot<carlos.talbot@gmail.com> wrote:
Giovanni, you mean like this message? "Unable to determine location for device. Voicemail password set via FreePBX will not be valid." This is a known FreePBX issue. http://www.freepbx.org/v3/ticket/36 Let's keep in ming FreePBX v3 is a developer release and as such many features are in flux and might not work. That being said there some features in the Windows build that still do not work. The biggest one right now is the lack of the php ESL library for Windows which affects the voicemail app. I'm trying to get this to compile but it's been difficult. I do include the .svn files with the FreePBX install so you can freely install TortoiseSVN and update FreePBX at your leisure. With regards to the sip_profiles, did you create a trunk group and trunk? regards, Carlos
On Mon, Aug 24, 2009 at 9:56 PM, Giovanni Maruzzelli < gmaruzz@celliax.org> wrote:
Windows installer does not work for me.
I've reinstalled various times, same results.
I can correctly create a number, but when I try to create a device for that number, it tells me that cannot locate the device, and the password for vicemail will be invalid.
After that, it begins to give the php error page, it cannot find the start < tag in directory/default.xml
Also for me there are no sofia profiles...
So, I cannot start to test it (eg: I would like to add mod_skypiax support to it).
Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
On Tue, Aug 25, 2009 at 12:06 AM, Raffaele P. Guidi<raffaele.p.guidi@gmail.com> wrote:
This is what I was asking! :D When the installer finished it started
the
whole thing and everything got loaded fine, but when I restarted my system it didn't (and did not anymore). Well, I will try to install everything from scratch again and see...
On Mon, Aug 24, 2009 at 20:30, Brian West <brian@freeswitch.org> wrote:
If you installed FreePBX then it would be that softwares job to
manage
the sofia profiles... wouldn't it?
/b
On Aug 24, 2009, at 1:24 PM, Raffaele P. Guidi wrote:
Actually I did that and it worked fine. I had the problem the SECOND time I run FS and freepbx. And (@Brian) mod_sofia was loaded but sip_profiles were not
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi there... So a few things on this. 1) We have a module that's still being worked on called Sip Interface that allows you to configure Sip Profiles in FreeSWITCH. Unfortunately we don't have the ability to easily import your existing SIP profiles, and by NOT displaying them in the UI your stock config conflicts with those profiles. In other words, internal.xml and external.xml define sip profiles on ports 5060 and 5080 that the GUI is unaware. So to simplify things, we just delete those files and expect you to recreate them via the UI on install. We'll probably make this a little more obvious in the near future, but for now, that's what we do. 2) The trunk creation system in the ISO does give the impression that trunk groups & trunks are for external. This is a design flaw I have already fixed in trunk (referenced above). We have now split this module into two modules - one for configuring Sip Interface/Sip Profiles (which are for defining your IPs & ports to use for sending/receiving calls and authentication settings) and the other for defining gateways ('trunks") which are generally used for making outbound calls. So in other words, we're aware of the issues you are detailing. We will be finalizing the fix for this issue hopefully on Sunday and will rebuild the ISO by Monday. Hope that helps. - Darren ________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Carlos Talbot Sent: Tuesday, August 25, 2009 12:02 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FreeSWITCH 1.0.4 windows installer - great but I have a little problem This would be a question for Darren and the FreePBX group. :) I guess it does not help that the User Documentation link on this page is currently empty: http://www.freepbx.org/v3/wiki/ If you note the message during FreePBX initialization *all* files in the sip_profiles directory are removed (including internal*.xml). This causes 'sofia status' to come back empty. Incompatible Configuration WARNING: THE FOLLOWING FILES WILL BE DELETED! * D:/FreeSWITCH/conf/sip_profiles/external.xml * D:/FreeSWITCH/conf/sip_profiles/internal-ipv6.xml * D:/FreeSWITCH/conf/sip_profiles/internal.xml regards, Carlos On Tue, Aug 25, 2009 at 1:28 PM, Giovanni Maruzzelli <gmaruzz@celliax.org<mailto:gmaruzz@celliax.org>> wrote:
From the front page of FPBX is not clear you *must* create a trunk/trunk group.
I was thinking trunks were for outgoing calls, or for receiving from external. I was just testing internal phones, trying an IVR, so I was thinking trunks were not needed. Can you explain to me? Thanks again, -giovanni Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618 On Tue, Aug 25, 2009 at 8:06 PM, Carlos Talbot<carlos.talbot@gmail.com<mailto:carlos.talbot@gmail.com>> wrote:
Giovanni, you mean like this message? "Unable to determine location for device. Voicemail password set via FreePBX will not be valid." This is a known FreePBX issue. http://www.freepbx.org/v3/ticket/36 Let's keep in ming FreePBX v3 is a developer release and as such many features are in flux and might not work. That being said there some features in the Windows build that still do not work. The biggest one right now is the lack of the php ESL library for Windows which affects the voicemail app. I'm trying to get this to compile but it's been difficult. I do include the .svn files with the FreePBX install so you can freely install TortoiseSVN and update FreePBX at your leisure. With regards to the sip_profiles, did you create a trunk group and trunk? regards, Carlos
On Mon, Aug 24, 2009 at 9:56 PM, Giovanni Maruzzelli <gmaruzz@celliax.org<mailto:gmaruzz@celliax.org>> wrote:
Windows installer does not work for me.
I've reinstalled various times, same results.
I can correctly create a number, but when I try to create a device for that number, it tells me that cannot locate the device, and the password for vicemail will be invalid.
After that, it begins to give the php error page, it cannot find the start < tag in directory/default.xml
Also for me there are no sofia profiles...
So, I cannot start to test it (eg: I would like to add mod_skypiax support to it).
Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
On Tue, Aug 25, 2009 at 12:06 AM, Raffaele P. Guidi<raffaele.p.guidi@gmail.com<mailto:raffaele.p.guidi@gmail.com>> wrote:
This is what I was asking! :D When the installer finished it started the whole thing and everything got loaded fine, but when I restarted my system it didn't (and did not anymore). Well, I will try to install everything from scratch again and see...
On Mon, Aug 24, 2009 at 20:30, Brian West <brian@freeswitch.org<mailto:brian@freeswitch.org>> wrote:
If you installed FreePBX then it would be that softwares job to manage the sofia profiles... wouldn't it?
/b
On Aug 24, 2009, at 1:24 PM, Raffaele P. Guidi wrote:
Actually I did that and it worked fine. I had the problem the SECOND time I run FS and freepbx. And (@Brian) mod_sofia was loaded but sip_profiles were not
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Darren, thanks! it helps a lot. If we svn up in /var/www/freepbx we got the trunk? On Tue, Aug 25, 2009 at 10:59 PM, Darren Schreiber<d@d-man.org> wrote:
Hi there...
So a few things on this.
1) We have a module that's still being worked on called Sip Interface that allows you to configure Sip Profiles in FreeSWITCH. Unfortunately we don't have the ability to easily import your existing SIP profiles, and by NOT displaying them in the UI your stock config conflicts with those profiles. In other words, internal.xml and external.xml define sip profiles on ports 5060 and 5080 that the GUI is unaware. So to simplify things, we just delete those files and expect you to recreate them via the UI on install. We'll probably make this a little more obvious in the near future, but for now, that's what we do.
2) The trunk creation system in the ISO does give the impression that trunk groups & trunks are for external. This is a design flaw I have already fixed in trunk (referenced above). We have now split this module into two modules - one for configuring Sip Interface/Sip Profiles (which are for defining your IPs & ports to use for sending/receiving calls and authentication settings) and the other for defining gateways ('trunks") which are generally used for making outbound calls.
So in other words, we're aware of the issues you are detailing. We will be finalizing the fix for this issue hopefully on Sunday and will rebuild the ISO by Monday.
Hope that helps.
- Darren
________________________________ From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Carlos Talbot Sent: Tuesday, August 25, 2009 12:02 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FreeSWITCH 1.0.4 windows installer - great but I have a little problem
This would be a question for Darren and the FreePBX group. :) I guess it does not help that the User Documentation link on this page is currently empty: http://www.freepbx.org/v3/wiki/ If you note the message during FreePBX initialization *all* files in the sip_profiles directory are removed (including internal*.xml). This causes 'sofia status' to come back empty.
Incompatible Configuration
WARNING: THE FOLLOWING FILES WILL BE DELETED!
D:/FreeSWITCH/conf/sip_profiles/external.xml D:/FreeSWITCH/conf/sip_profiles/internal-ipv6.xml D:/FreeSWITCH/conf/sip_profiles/internal.xml
regards, Carlos
On Tue, Aug 25, 2009 at 1:28 PM, Giovanni Maruzzelli <gmaruzz@celliax.org> wrote:
From the front page of FPBX is not clear you *must* create a trunk/trunk group.
I was thinking trunks were for outgoing calls, or for receiving from external.
I was just testing internal phones, trying an IVR, so I was thinking trunks were not needed.
Can you explain to me?
Thanks again,
-giovanni
Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
On Tue, Aug 25, 2009 at 8:06 PM, Carlos Talbot<carlos.talbot@gmail.com> wrote:
Giovanni, you mean like this message? "Unable to determine location for device. Voicemail password set via FreePBX will not be valid." This is a known FreePBX issue. http://www.freepbx.org/v3/ticket/36 Let's keep in ming FreePBX v3 is a developer release and as such many features are in flux and might not work. That being said there some features in the Windows build that still do not work. The biggest one right now is the lack of the php ESL library for Windows which affects the voicemail app. I'm trying to get this to compile but it's been difficult. I do include the .svn files with the FreePBX install so you can freely install TortoiseSVN and update FreePBX at your leisure. With regards to the sip_profiles, did you create a trunk group and trunk? regards, Carlos
On Mon, Aug 24, 2009 at 9:56 PM, Giovanni Maruzzelli <gmaruzz@celliax.org> wrote:
Windows installer does not work for me.
I've reinstalled various times, same results.
I can correctly create a number, but when I try to create a device for that number, it tells me that cannot locate the device, and the password for vicemail will be invalid.
After that, it begins to give the php error page, it cannot find the start < tag in directory/default.xml
Also for me there are no sofia profiles...
So, I cannot start to test it (eg: I would like to add mod_skypiax support to it).
Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
On Tue, Aug 25, 2009 at 12:06 AM, Raffaele P. Guidi<raffaele.p.guidi@gmail.com> wrote:
This is what I was asking! :D When the installer finished it started the whole thing and everything got loaded fine, but when I restarted my system it didn't (and did not anymore). Well, I will try to install everything from scratch again and see...
On Mon, Aug 24, 2009 at 20:30, Brian West <brian@freeswitch.org> wrote:
If you installed FreePBX then it would be that softwares job to manage the sofia profiles... wouldn't it?
/b
On Aug 24, 2009, at 1:24 PM, Raffaele P. Guidi wrote:
> Actually I did that and it worked fine. I had the problem the > SECOND > time I run FS and freepbx. And (@Brian) mod_sofia was loaded but > sip_profiles were not
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Darren, I shall look forward to check version 3 of FreePBX for FS. I hope it not trixswitch anyone aware of status on trixswitch (not that I m a big fan of Trixbox, but quite a while back I had seen trixswitch iso so wondering if anything is progresing on that end. Thanks & Regards, Mitul Limbani, Founder & CEO, Enterux Solutions Pvt. Ltd., The Enterprise Linux Company (r), http://www.enterux.com http://www.entVoice.com On 26-Aug-2009, at 2:29 AM, Darren Schreiber <d@d-man.org> wrote:
Hi there...
So a few things on this.
1) We have a module that's still being worked on called Sip Interface that allows you to configure Sip Profiles in FreeSWITCH. Unfortunately we don't have the ability to easily import your existing SIP profiles, and by NOT displaying them in the UI your stock config conflicts with those profiles. In other words, internal.xml and external.xml define sip profiles on ports 5060 and 5080 that the GUI is unaware. So to simplify things, we just delete those files and expect you to recreate them via the UI on install. We'll probably make this a little more obvious in the near future, but for now, that's what we do.
2) The trunk creation system in the ISO does give the impression that trunk groups & trunks are for external. This is a design flaw I have already fixed in trunk (referenced above). We have now split this module into two modules - one for configuring Sip Interface/Sip Profiles (which are for defining your IPs & ports to use for sending/ receiving calls and authentication settings) and the other for defining gateways ('trunks") which are generally used for making outbound calls.
So in other words, we're aware of the issues you are detailing. We will be finalizing the fix for this issue hopefully on Sunday and will rebuild the ISO by Monday.
Hope that helps.
- Darren
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Carlos Talbot Sent: Tuesday, August 25, 2009 12:02 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FreeSWITCH 1.0.4 windows installer - great but I have a little problem
This would be a question for Darren and the FreePBX group. :) I guess it does not help that the User Documentation link on this page is currently empty: http://www.freepbx.org/v3/wiki/
If you note the message during FreePBX initialization *all* files in the sip_profiles directory are removed (including internal*.xml). This causes 'sofia status' to come back empty.
Incompatible Configuration WARNING: THE FOLLOWING FILES WILL BE DELETED!
D:/FreeSWITCH/conf/sip_profiles/external.xml D:/FreeSWITCH/conf/sip_profiles/internal-ipv6.xml D:/FreeSWITCH/conf/sip_profiles/internal.xml
regards,
Carlos
On Tue, Aug 25, 2009 at 1:28 PM, Giovanni Maruzzelli <gmaruzz@celliax.org
wrote:
From the front page of FPBX is not clear you *must* create a trunk/ trunk group.
I was thinking trunks were for outgoing calls, or for receiving from external.
I was just testing internal phones, trying an IVR, so I was thinking trunks were not needed.
Can you explain to me?
Thanks again,
-giovanni
Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
On Tue, Aug 25, 2009 at 8:06 PM, Carlos Talbot<carlos.talbot@gmail.com> wrote:
Giovanni, you mean like this message? "Unable to determine location for device. Voicemail password set via FreePBX will not be valid." This is a known FreePBX issue. http://www.freepbx.org/v3/ticket/36 Let's keep in ming FreePBX v3 is a developer release and as such many features are in flux and might not work. That being said there some features in the Windows build that still do not work. The biggest one right now is the lack of the php ESL library for Windows which affects the voicemail app. I'm trying to get this to compile but it's been difficult. I do include the .svn files with the FreePBX install so you can freely install TortoiseSVN and update FreePBX at your leisure. With regards to the sip_profiles, did you create a trunk group and trunk? regards, Carlos
On Mon, Aug 24, 2009 at 9:56 PM, Giovanni Maruzzelli <gmaruzz@celliax.org
wrote:
Windows installer does not work for me.
I've reinstalled various times, same results.
I can correctly create a number, but when I try to create a
device for
that number, it tells me that cannot locate the device, and the password for vicemail will be invalid.
After that, it begins to give the php error page, it cannot find the start < tag in directory/default.xml
Also for me there are no sofia profiles...
So, I cannot start to test it (eg: I would like to add mod_skypiax support to it).
Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
On Tue, Aug 25, 2009 at 12:06 AM, Raffaele P. Guidi<raffaele.p.guidi@gmail.com> wrote:
This is what I was asking! :D When the installer finished it started the whole thing and everything got loaded fine, but when I restarted my system it didn't (and did not anymore). Well, I will try to install everything from scratch again and see...
On Mon, Aug 24, 2009 at 20:30, Brian West <brian@freeswitch.org> wrote:
If you installed FreePBX then it would be that softwares job
to manage
the sofia profiles... wouldn't it?
/b
On Aug 24, 2009, at 1:24 PM, Raffaele P. Guidi wrote:
Actually I did that and it worked fine. I had the problem the SECOND time I run FS and freepbx. And (@Brian) mod_sofia was loaded but sip_profiles were not
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
chances are mod_sofia isn't loaded. /b On Aug 16, 2009, at 4:43 AM, Raffaele P. Guidi wrote:
Can you give me a hint? Should sofia profiles be served by curl or something?
Thanks, Raffaele
hello, could you give me the installer Link to test it? thanks meftah tayeb DelphiWorld@irc.freenode.net * Call Me (SIP) <sip:voipworld@sip.voipuser.org> * Call me (skype) <skype:tayeb.meftah> * Call Me (PSTN) <callto:0021348526972> Brian West wrote:
chances are mod_sofia isn't loaded.
/b
On Aug 16, 2009, at 4:43 AM, Raffaele P. Guidi wrote:
Can you give me a hint? Should sofia profiles be served by curl or something?
Thanks, Raffaele
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4339 (20090816) __________
The message was checked by ESET NOD32 Antivirus.
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4339 (20090816) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
http://files.freeswitch.org/windows_installer/freeswitch-1.0.4.exe On Sun, Aug 16, 2009 at 1:25 PM, Meftah Tayeb <tayeb.meftah@gmail.com>wrote:
hello, could you give me the installer Link to test it? thanks meftah tayeb DelphiWorld@irc.freenode.net
- Call Me (SIP) - Call me (skype) - Call Me (PSTN) <callto:0021348526972>
Brian West wrote:
chances are mod_sofia isn't loaded.
/b
On Aug 16, 2009, at 4:43 AM, Raffaele P. Guidi wrote:
Can you give me a hint? Should sofia profiles be served by curl or something?
Thanks, Raffaele
_______________________________________________ FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4339 (20090816) __________
The message was checked by ESET NOD32 Antivirus. http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4339 (20090816) __________
The message was checked by ESET NOD32 Antivirus.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
hello i'm rewriting this executable file in MSI format i can use: * MakeMSI * WIX (Windows installer XML) what you like? WIX is open source, but MakeMSI i'm not sur for web server, i'm replacing WAMP with a great web server called uniform server this server have a conventional Unix Path configuration, for example, web files can by stored in /www/ and apache is in /usr/local/apache2 this facilitate the deploiment of applications any suggestion? thanks Meftah Tayeb Carlos Talbot wrote:
http://files.freeswitch.org/windows_installer/freeswitch-1.0.4.exe
On Sun, Aug 16, 2009 at 1:25 PM, Meftah Tayeb <tayeb.meftah@gmail.com <mailto:tayeb.meftah@gmail.com>> wrote:
hello, could you give me the installer Link to test it? thanks meftah tayeb DelphiWorld@irc.freenode.net <mailto:DelphiWorld@irc.freenode.net>
* Call Me (SIP) * Call me (skype) * Call Me (PSTN) <callto:0021348526972>
Brian West wrote:
chances are mod_sofia isn't loaded.
/b
On Aug 16, 2009, at 4:43 AM, Raffaele P. Guidi wrote:
Can you give me a hint? Should sofia profiles be served by curl or something?
Thanks, Raffaele
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4339 (20090816) __________
The message was checked by ESET NOD32 Antivirus.
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4339 (20090816) __________
The message was checked by ESET NOD32 Antivirus.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4340 (20090816) __________
The message was checked by ESET NOD32 Antivirus.
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4340 (20090816) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
I think sticking with standard WAMP is preferable. What is the advantage to creating yet another installer over the one that we have already done and maintained? Mike On Aug 16, 2009, at 6:02 PM, Meftah Tayeb wrote:
hello i'm rewriting this executable file in MSI format i can use: MakeMSI WIX (Windows installer XML) what you like? WIX is open source, but MakeMSI i'm not sur for web server, i'm replacing WAMP with a great web server called uniform server this server have a conventional Unix Path configuration, for example, web files can by stored in /www/ and apache is in /usr/ local/apache2 this facilitate the deploiment of applications any suggestion? thanks Meftah Tayeb Carlos Talbot wrote:
http://files.freeswitch.org/windows_installer/freeswitch-1.0.4.exe
hi MikeJ, i prefer creating MSI file that is easy to mintin$ unstid of using inno setup or advanced installer (not free), we can use WIX (Windows installer XML) that is a open source one we can create a customised MSI that fully install mor features, including Sounds / MOH/... and we can edit XML files easyly to let users chouse each module to install during setup, for example conferencing, voice mail, Event Socket and ... also the WAMP server is not fully stable i prefer Uniform Server, that mintin Full Compatibility with Unix like platform including for example, perl files that need this path: /usr/... apache2 is installed in /usr/local/apache2, mySQL: /usr/local/mysql and php is in /usr/local/php and perl is in /usr/bin php my admin is in /etc/phpmyadmin and mor featurs, including multiple instance, virtual hosting and full management using control pannel this will help enterprise users that need that in windows unstid of WAMP --------------- if you don't want to mintin it, jive me a chance to mintin it --------------- thanks Contact Me * SIP <sip:voipworld@sip.voipuser.org> * INUM <callto:+883510009102769> * PSTN <callto:0021348526972> * Email <mailto:tayeb.meftah@gmail.com> Michael Jerris wrote:
I think sticking with standard WAMP is preferable. What is the advantage to creating yet another installer over the one that we have already done and maintained?
Mike
On Aug 16, 2009, at 6:02 PM, Meftah Tayeb wrote:
hello i'm rewriting this executable file in MSI format i can use:
* MakeMSI * WIX (Windows installer XML)
what you like? WIX is open source, but MakeMSI i'm not sur for web server, i'm replacing WAMP with a great web server called uniform server this server have a conventional Unix Path configuration, for example, web files can by stored in /www/ and apache is in /usr/local/apache2 this facilitate the deploiment of applications any suggestion? thanks Meftah Tayeb Carlos Talbot wrote:
http://files.freeswitch.org/windows_installer/freeswitch-1.0.4.exe
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4340 (20090816) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com ------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4340 (20090816) __________
The message was checked by ESET NOD32 Antivirus.
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4340 (20090816) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
On Aug 17, 2009, at 5:29 AM, Meftah Tayeb wrote:
hi MikeJ, i prefer creating MSI file that is easy to mintin$
How is this useful vs. something that is already maintained?
unstid of using inno setup or advanced installer (not free), we can use WIX (Windows installer XML) that is a open source one
All the tools being used are free, however all are not open source.
we can create a customised MSI that fully install mor features, including Sounds / MOH/...
This installer already does all that and more.
and we can edit XML files easyly to let users chouse each module to install during setup, for example conferencing, voice mail, Event Socket and ... also the WAMP server is not fully stable i prefer Uniform Server, that mintin Full Compatibility with Unix like platform including for example, perl files that need this path: /usr/... apache2 is installed in /usr/local/apache2, mySQL: /usr/local/mysql and php is in /usr/local/php and perl is in /usr/bin php my admin is in /etc/phpmyadmin and mor featurs, including multiple instance, virtual hosting and full management using control pannel this will help enterprise users that need that in windows unstid of WAMP --------------- if you don't want to mintin it, jive me a chance to mintin it --------------- thanks
I just don't want to split efforts here, every different way we do this is yet another way we have to support. I see no compelling argument here other than personal preference. If I am missing anything someone please chime in and correct me. Mike
Contact Me
SIP INUM PSTN Email
Michael Jerris wrote:
I think sticking with standard WAMP is preferable. What is the advantage to creating yet another installer over the one that we have already done and maintained?
Mike
On Aug 16, 2009, at 6:02 PM, Meftah Tayeb wrote:
hello i'm rewriting this executable file in MSI format i can use: MakeMSI WIX (Windows installer XML) what you like? WIX is open source, but MakeMSI i'm not sur for web server, i'm replacing WAMP with a great web server called uniform server this server have a conventional Unix Path configuration, for example, web files can by stored in /www/ and apache is in /usr/ local/apache2 this facilitate the deploiment of applications any suggestion? thanks Meftah Tayeb Carlos Talbot wrote:
http://files.freeswitch.org/windows_installer/freeswitch-1.0.4.exe
hi MikeJ, yes, is allready maintained with the latest APACHE/PHP/MySQL/Perl software in uniform server / sourceforge i can provide you with any informations, if you want to help you about using Windows Installer XML please just add a customisation to the installer and ignore Advanced installer some users want to install FreePBX3 in IIS we can provide Virtual directory installation optionaly, unstid of uniform server in a custom dialog, we chouse if we use IIS or Uniform Server http://www.wixedit.sourceforge.net/ thanks, meftah tayeb Michael Jerris wrote:
On Aug 17, 2009, at 5:29 AM, Meftah Tayeb wrote:
hi MikeJ, i prefer creating MSI file that is easy to mintin$
How is this useful vs. something that is already maintained?
unstid of using inno setup or advanced installer (not free), we can use WIX (Windows installer XML) that is a open source one
All the tools being used are free, however all are not open source.
we can create a customised MSI that fully install mor features, including Sounds / MOH/...
This installer already does all that and more.
and we can edit XML files easyly to let users chouse each module to install during setup, for example conferencing, voice mail, Event Socket and ... also the WAMP server is not fully stable i prefer Uniform Server, that mintin Full Compatibility with Unix like platform including for example, perl files that need this path: /usr/... apache2 is installed in /usr/local/apache2, mySQL: /usr/local/mysql and php is in /usr/local/php and perl is in /usr/bin php my admin is in /etc/phpmyadmin and mor featurs, including multiple instance, virtual hosting and full management using control pannel this will help enterprise users that need that in windows unstid of WAMP --------------- if you don't want to mintin it, jive me a chance to mintin it --------------- thanks
I just don't want to split efforts here, every different way we do this is yet another way we have to support. I see no compelling argument here other than personal preference. If I am missing anything someone please chime in and correct me.
Mike
Contact Me
* SIP <sip:voipworld@sip.voipuser.org> * INUM <callto:+883510009102769> * PSTN <callto:0021348526972> * Email <mailto:tayeb.meftah@gmail.com>
Michael Jerris wrote:
I think sticking with standard WAMP is preferable. What is the advantage to creating yet another installer over the one that we have already done and maintained?
Mike
On Aug 16, 2009, at 6:02 PM, Meftah Tayeb wrote:
hello i'm rewriting this executable file in MSI format i can use:
* MakeMSI * WIX (Windows installer XML)
what you like? WIX is open source, but MakeMSI i'm not sur for web server, i'm replacing WAMP with a great web server called uniform server this server have a conventional Unix Path configuration, for example, web files can by stored in /www/ and apache is in /usr/local/apache2 this facilitate the deploiment of applications any suggestion? thanks Meftah Tayeb Carlos Talbot wrote:
http://files.freeswitch.org/windows_installer/freeswitch-1.0.4.exe
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4345 (20090818) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com ------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4345 (20090818) __________
The message was checked by ESET NOD32 Antivirus.
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4345 (20090818) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
participants (9)
-
Brian West
-
Carlos Talbot
-
Darren Schreiber
-
Giovanni Maruzzelli
-
Meftah Tayeb
-
Michael Di Martino
-
Michael Jerris
-
Mitul Limbani
-
Raffaele P. Guidi