Hi, I`m trying to implement Call Forwarding in my FS setup. I set a user variable managing the type of forwarding (busy,no answer,unconditional) and the destination the phone is forwarded to: <user id='102'> <variables> <variable name='fwd_type' value='unconditional'/> <variable name='fwd_unconditional_number' value='103"/> </variables> </user> Then in my dialplan I check if the called user has ${fwd_type} set and if so I set the destination_number to ${fwd_unconditional_number}. After this operation I bridge the call to the new destination_number. The issue in this scenario is that I get a cdr in which A (101) calls C(103) and I need to have two cdrs, one from A(101) to B(102) and one from B(102) to C(103). Does anyone know how can this be implemented. 10x, NG
nik, please try the "legs" variable http://www.nabble.com/CDR-accounting-question-td19212516.html /nandy On Sun, Sep 6, 2009 at 6:40 PM, Nikolai Geordzhev <n.geordzhev@gmail.com>wrote:
Hi, I`m trying to implement Call Forwarding in my FS setup. I set a user variable managing the type of forwarding (busy,no answer,unconditional) and the destination the phone is forwarded to:
<user id='102'> <variables> <variable name='fwd_type' value='unconditional'/> <variable name='fwd_unconditional_number' value='103"/> </variables> </user>
Then in my dialplan I check if the called user has ${fwd_type} set and if so I set the destination_number to ${fwd_unconditional_number}. After this operation I bridge the call to the new destination_number. The issue in this scenario is that I get a cdr in which A (101) calls C(103) and I need to have two cdrs, one from A(101) to B(102) and one from B(102) to C(103). Does anyone know how can this be implemented.
10x, NG
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I`ve already tried the legs variable in cdr_csv.conf.xml, I have also tried to use the loopback endpoint and to bridge the call to the internal interface(so it can go out and in again generating the 2cdr-s I need) and still haven`t achieved any success. Can anyone please share some experience in doing CallForwarding in FreeSwitch. I beleive I`m not the only guy tryiig to achieve this, what`s the Best Practices for this task? Regards, NG On Mon, Sep 7, 2009 at 2:54 AM, Nandy Dagondon <nandy1925@gmail.com> wrote:
nik,
please try the "legs" variable http://www.nabble.com/CDR-accounting-question-td19212516.html
/nandy
On Sun, Sep 6, 2009 at 6:40 PM, Nikolai Geordzhev <n.geordzhev@gmail.com>wrote:
Hi, I`m trying to implement Call Forwarding in my FS setup. I set a user variable managing the type of forwarding (busy,no answer,unconditional) and the destination the phone is forwarded to:
<user id='102'> <variables> <variable name='fwd_type' value='unconditional'/> <variable name='fwd_unconditional_number' value='103"/> </variables> </user>
Then in my dialplan I check if the called user has ${fwd_type} set and if so I set the destination_number to ${fwd_unconditional_number}. After this operation I bridge the call to the new destination_number. The issue in this scenario is that I get a cdr in which A (101) calls C(103) and I need to have two cdrs, one from A(101) to B(102) and one from B(102) to C(103). Does anyone know how can this be implemented.
10x, NG
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Tue, Sep 8, 2009 at 1:20 PM, Nikolai Geordzhev <n.geordzhev@gmail.com>wrote:
I`ve already tried the legs variable in cdr_csv.conf.xml, I have also tried to use the loopback endpoint and to bridge the call to the internal interface(so it can go out and in again generating the 2cdr-s I need) and still haven`t achieved any success. Can anyone please share some experience in doing CallForwarding in FreeSwitch. I beleive I`m not the only guy tryiig to achieve this, what`s the Best Practices for this task?
Nik, Can you pastebin your dialplan where you do this? I'd like to see what you're doing and perhaps see if I can duplicate your scenario for testing. Thanks, MC
On 9/6/09, Nikolai Geordzhev <n.geordzhev@gmail.com> wrote:
Hi, I`m trying to implement Call Forwarding in my FS setup. I set a user variable managing the type of forwarding (busy,no answer,unconditional) and the destination the phone is forwarded to:
<user id='102'> <variables> <variable name='fwd_type' value='unconditional'/> <variable name='fwd_unconditional_number' value='103"/> </variables> </user>
Then in my dialplan I check if the called user has ${fwd_type} set and if so I set the destination_number to ${fwd_unconditional_number}. After this operation I bridge the call to the new destination_number. The issue in this scenario is that I get a cdr in which A (101) calls C(103) and I need to have two cdrs, one from A(101) to B(102) and one from B(102) to C(103). Does anyone know how can this be implemented.
10x, NG
-- Sent from my mobile device
participants (4)
-
Michael Collins
-
Nandy Dagondon
-
Nikolai Geordzhev
-
Stephen Davies