Inbound DID trunk without authentication
Hi! I have DID provider and give me only IP from where call will come. So I need to configure gateway without authentication. I read several posts and h ere is what have I done in acl.conf.xml i add: <list name="testdid" default="deny"> <node type="allow" cidr="xxx.xxx.xxx.xxx/32"/> </list> then in dialplan\public\00_inbound_did.xml I add <include> <extension name="public_did"> <condition field="destination_number" expression="^(mydidnumber)$"> <action application="set" data="domain_name=$${domain}"/> <!-- This example maps the DID 5551212 to ring 1000 in the default context --> <action application="transfer" data="1000 XML default"/> </condition> </extension> </include> What I see in console I keep getting rejected by ACL "domains" If I understand correctly if IP of inbound call is in ACL then call is transfered to public dialplan? I need this gateway only for inbound calls. Please, any suggestions?
What acl do you use @ external profile? Also, don't forget to reloadacl. 2012/11/29 Gregor Nanger <gregor@infomedia.si>
Hi!
I have DID provider and give me only IP from where call will come. So I need to configure gateway without authentication. I read several posts and h ere is what have I done
in acl.conf.xml i add:
<list name="testdid" default="deny"> <node type="allow" cidr="xxx.xxx.xxx.xxx/32"/> </list>
then in dialplan\public\00_inbound_did.xml I add <include> <extension name="public_did"> <condition field="destination_number" expression="^(mydidnumber)$"> <action application="set" data="domain_name=$${domain}"/> <!-- This example maps the DID 5551212 to ring 1000 in the default context --> <action application="transfer" data="1000 XML default"/> </condition> </extension> </include>
What I see in console I keep getting rejected by ACL "domains"
If I understand correctly if IP of inbound call is in ACL then call is transfered to public dialplan?
I need this gateway only for inbound calls.
Please, any suggestions?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Can you please give me more information. Aren't ACLs only in one place for all profiles? Best regards, Gregor 2012/11/29 Anton Kvashenkin <anton.jugatsu@gmail.com>
What acl do you use @ external profile? Also, don't forget to reloadacl.
2012/11/29 Gregor Nanger <gregor@infomedia.si>
Hi!
I have DID provider and give me only IP from where call will come. So I need to configure gateway without authentication. I read several posts and h ere is what have I done
in acl.conf.xml i add:
<list name="testdid" default="deny"> <node type="allow" cidr="xxx.xxx.xxx.xxx/32"/> </list>
then in dialplan\public\00_inbound_did.xml I add <include> <extension name="public_did"> <condition field="destination_number" expression="^(mydidnumber)$"> <action application="set" data="domain_name=$${domain}"/> <!-- This example maps the DID 5551212 to ring 1000 in the default context --> <action application="transfer" data="1000 XML default"/> </condition> </extension> </include>
What I see in console I keep getting rejected by ACL "domains"
If I understand correctly if IP of inbound call is in ACL then call is transfered to public dialplan?
I need this gateway only for inbound calls.
Please, any suggestions?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Thu, Nov 29, 2012 at 09:36:25AM +0100, Gregor Nanger wrote:
in acl.conf.xml i add:
<list name="testdid" default="deny"> <node type="allow" cidr="xxx.xxx.xxx.xxx/32"/> </list>
What I see in console I keep getting rejected by ACL "domains"
If I understand correctly if IP of inbound call is in ACL then call is transfered to public dialplan?
I need this gateway only for inbound calls.
Try adding: <node type="allow" cidr="xxx.xxx.xxx.xxx/32"/> into the existing stanza in acl.conf.xml which starts with: <list name="domains" ... as this is the ACL which your SIP profile seems to be using to authenticate incoming calls. Regards,
I was getting similar problem and modifying acl.conf didn't work for me. What work for me was modifying sip_profiles/internal.xml and sip_profiles/external.xml with Either param name="local-network-acl" value="localnet.auto" - For Private IPs (This is default) Or param name="candidate-acl" value="wan.auto" param name="local-network-acl" value="localnet.auto" - For Public IPs. -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Paul Cupis Sent: 29 November 2012 16:02 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Inbound DID trunk without authentication On Thu, Nov 29, 2012 at 09:36:25AM +0100, Gregor Nanger wrote:
in acl.conf.xml i add:
<list name="testdid" default="deny"> <node type="allow" cidr="xxx.xxx.xxx.xxx/32"/> </list>
What I see in console I keep getting rejected by ACL "domains"
If I understand correctly if IP of inbound call is in ACL then call is transfered to public dialplan?
I need this gateway only for inbound calls.
Try adding: <node type="allow" cidr="xxx.xxx.xxx.xxx/32"/> into the existing stanza in acl.conf.xml which starts with: <list name="domains" ... as this is the ACL which your SIP profile seems to be using to authenticate incoming calls. Regards, _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I thought that just set acl and set in /sip_profiles/external.xml <param name="apply-inbound-acl" value="testdid"/> would solve this, but it doesn't working. Trunk DID provider I am using is sending calls to FS. Now I just want to get this calls into public dialplan based only on IP, not authorization. :-( 2012/11/29 Sanjay Soni <ssoni@lifesize.com>
I was getting similar problem and modifying acl.conf didn't work for me. What work for me was modifying sip_profiles/internal.xml and sip_profiles/external.xml with Either param name="local-network-acl" value="localnet.auto" - For Private IPs (This is default) Or param name="candidate-acl" value="wan.auto" param name="local-network-acl" value="localnet.auto" - For Public IPs.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Paul Cupis Sent: 29 November 2012 16:02 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Inbound DID trunk without authentication
On Thu, Nov 29, 2012 at 09:36:25AM +0100, Gregor Nanger wrote:
in acl.conf.xml i add:
<list name="testdid" default="deny"> <node type="allow" cidr="xxx.xxx.xxx.xxx/32"/> </list>
What I see in console I keep getting rejected by ACL "domains"
If I understand correctly if IP of inbound call is in ACL then call is transfered to public dialplan?
I need this gateway only for inbound calls.
Try adding:
<node type="allow" cidr="xxx.xxx.xxx.xxx/32"/>
into the existing stanza in acl.conf.xml which starts with:
<list name="domains" ...
as this is the ACL which your SIP profile seems to be using to authenticate incoming calls.
Regards,
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Gregor, I have to admit, every time I've tried using ACLs for inbound authentication (i.e. an inbound DID), it always gave me the same damn error (rejected by ACL 'domains' etc). I've searched endlessly for a reason why, but couldn't seem to find a combination of variables that worked. I figured that it must be working else everyone would be complaining, and that my own lack of knowledge/experience with FreeSWITCH meant I was getting something fundamentally wrong in the config. So, I removed ACLs, threw up an iptables rule and put a TODO in the project plan to fix ACLs before release lol. I'll have another look at this, and see if I can figure out wtf I'm doing wrong. This may/may not be the same problem your having, but I'll report back either way and hopefully it'll help! Cal On Thu, Nov 29, 2012 at 11:15 AM, Gregor Nanger <gregor@infomedia.si> wrote:
I thought that just set acl and set in /sip_profiles/external.xml <param name="apply-inbound-acl" value="testdid"/> would solve this, but it doesn't working.
Trunk DID provider I am using is sending calls to FS. Now I just want to get this calls into public dialplan based only on IP, not authorization. :-(
2012/11/29 Sanjay Soni <ssoni@lifesize.com>
I was getting similar problem and modifying acl.conf didn't work for me. What work for me was modifying sip_profiles/internal.xml and sip_profiles/external.xml with Either param name="local-network-acl" value="localnet.auto" - For Private IPs (This is default) Or param name="candidate-acl" value="wan.auto" param name="local-network-acl" value="localnet.auto" - For Public IPs.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Paul Cupis Sent: 29 November 2012 16:02 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Inbound DID trunk without authentication
On Thu, Nov 29, 2012 at 09:36:25AM +0100, Gregor Nanger wrote:
in acl.conf.xml i add:
<list name="testdid" default="deny"> <node type="allow" cidr="xxx.xxx.xxx.xxx/32"/> </list>
What I see in console I keep getting rejected by ACL "domains"
If I understand correctly if IP of inbound call is in ACL then call is transfered to public dialplan?
I need this gateway only for inbound calls.
Try adding:
<node type="allow" cidr="xxx.xxx.xxx.xxx/32"/>
into the existing stanza in acl.conf.xml which starts with:
<list name="domains" ...
as this is the ACL which your SIP profile seems to be using to authenticate incoming calls.
Regards,
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Cal! I think I got it now and it may help you. If call is coming to port 5060, then it is automaticly routed as sip_profiles/internal profile. In internal.xml it is rule to obbey "domains" list from acl.conf.xml. So, whatever you do in acl, nothing will change behaviour. So what I did? I expanded domains list to add IP node of my provider. Now incoming call is granted from acl and doesn't require authentication, but automaticlly goes to public dial plan. I still have to figure it out why does it go to public diaplan. In the end, this is what I wanted, but just want to know wha it goes to public, where is this rule set. Gregor 2012/11/29 Cal Leeming [Simplicity Media Ltd] < cal.leeming@simplicitymedialtd.co.uk>
Hi Gregor,
I have to admit, every time I've tried using ACLs for inbound authentication (i.e. an inbound DID), it always gave me the same damn error (rejected by ACL 'domains' etc).
I've searched endlessly for a reason why, but couldn't seem to find a combination of variables that worked.
I figured that it must be working else everyone would be complaining, and that my own lack of knowledge/experience with FreeSWITCH meant I was getting something fundamentally wrong in the config.
So, I removed ACLs, threw up an iptables rule and put a TODO in the project plan to fix ACLs before release lol.
I'll have another look at this, and see if I can figure out wtf I'm doing wrong.
This may/may not be the same problem your having, but I'll report back either way and hopefully it'll help!
Cal
On Thu, Nov 29, 2012 at 11:15 AM, Gregor Nanger <gregor@infomedia.si>wrote:
I thought that just set acl and set in /sip_profiles/external.xml <param name="apply-inbound-acl" value="testdid"/> would solve this, but it doesn't working.
Trunk DID provider I am using is sending calls to FS. Now I just want to get this calls into public dialplan based only on IP, not authorization. :-(
2012/11/29 Sanjay Soni <ssoni@lifesize.com>
I was getting similar problem and modifying acl.conf didn't work for me. What work for me was modifying sip_profiles/internal.xml and sip_profiles/external.xml with Either param name="local-network-acl" value="localnet.auto" - For Private IPs (This is default) Or param name="candidate-acl" value="wan.auto" param name="local-network-acl" value="localnet.auto" - For Public IPs.
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Paul Cupis Sent: 29 November 2012 16:02 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Inbound DID trunk without authentication
On Thu, Nov 29, 2012 at 09:36:25AM +0100, Gregor Nanger wrote:
in acl.conf.xml i add:
<list name="testdid" default="deny"> <node type="allow" cidr="xxx.xxx.xxx.xxx/32"/> </list>
What I see in console I keep getting rejected by ACL "domains"
If I understand correctly if IP of inbound call is in ACL then call is transfered to public dialplan?
I need this gateway only for inbound calls.
Try adding:
<node type="allow" cidr="xxx.xxx.xxx.xxx/32"/>
into the existing stanza in acl.conf.xml which starts with:
<list name="domains" ...
as this is the ACL which your SIP profile seems to be using to authenticate incoming calls.
Regards,
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (5)
-
Anton Kvashenkin
-
Cal Leeming [Simplicity Media Ltd]
-
Gregor Nanger
-
Paul Cupis
-
Sanjay Soni