Its still out there… the site is dead… but FS still runs on RPi, the drivers are still on github, and I’ll have a pile of the little custom hardware boards for the RPi @ ClueCon From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of William Scott Sent: Tuesday, May 31, 2016 11:12 PM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] SwitchPi Is the SwitchPi project and blog still happening?
Hi Yes, I have FusionPBX/freeSwitch running on a RPi3. Will the ARM build ever become "Official"? I've watched a 'tube video or two. What is the functionality of the custom boards?
The custom boards allow for hardware DTMF keypad interface, hook switch and a few other things like LCD for CLID on old school phones with that provision. There will be official Raspian packages sooner or later… theres a know issue with the cowbuilder that’s blocking this at this time, we’re working on a work around… From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of William Scott Sent: Wednesday, June 1, 2016 6:52 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] SwitchPi Hi Yes, I have FusionPBX/freeSwitch running on a RPi3. Will the ARM build ever become "Official"? I've watched a 'tube video or two. What is the functionality of the custom boards? <https://mailtrack.io/trace/mail/d1a10f8bcbe53cd87724e18dfebb1cfaa57d5246383145.png>
May I ask the question of why make something customer just to run on the Rasberry Pi? There are X86 SOC coming to the market that will be close to the cost of the Pi, and be much more powerful. Plus, you can run regular x86 operating systems. On Thu, Jun 2, 2016 at 12:11 PM, Ken Rice <krice@freeswitch.org> wrote:
The custom boards allow for hardware DTMF keypad interface, hook switch and a few other things like LCD for CLID on old school phones with that provision.
There will be official Raspian packages sooner or later… theres a know issue with the cowbuilder that’s blocking this at this time, we’re working on a work around…
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *William Scott *Sent:* Wednesday, June 1, 2016 6:52 PM *To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* Re: [Freeswitch-users] SwitchPi
Hi
Yes, I have FusionPBX/freeSwitch running on a RPi3. Will the ARM build ever become "Official"?
I've watched a 'tube video or two. What is the functionality of the custom boards?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Why the Pi you ask? Why custom hardware to go with it? Generic X86 Hardware is not the end all be all. While the X86 based CPUs means that there can be less portability issues than say something like ARM or SPARC or other architectures, the PI still typically offers several other capabilities that may not be offered on the other Single Board Computers at a $35 price point. Then there is the well documented pile of GPIO ports that make it quite easy to drive things like custom keypads, servos, steppers, etc etc etc… this means you can spin a small custom board (in my case its about 1.5 square inches) that has the specific additional hardware for adding an additional 24 GPIOs giving room for a combination of something like 36 buttons worth of keypads and 12 other dry contact inputs and outputs (if you use 12 of the GPIO pins to drive a keypad array you can get 36 buttons. Basic formula for max number of potential keys (n/2)^2 where n is the number of GPIO pins used in the keypad array. Now mix that with that fact that ARM is not a second class Linux citizen anymore, we can pretty easily copy the source over compile and go. And things just work (barring the occasional endian issue that happens when taking software between architectures that are big vs little vs bi endian) Now theres always talk of a new cheap x86 based SoC such as the Edison, or other Arm based SBC like the odriod, or the CHIP, but I have yet to see one that is as readily available as the Pi at the $35 with the myriad of addons and software already running on it. (Yesterday I installed FreeSWITCH on a Pi and it took about 45 minutes… there was 1 issues with Faxing that we are looking into and its probably an endian issue) From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Colton Conor Sent: Friday, June 3, 2016 7:59 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] SwitchPi May I ask the question of why make something customer just to run on the Rasberry Pi? There are X86 SOC coming to the market that will be close to the cost of the Pi, and be much more powerful. Plus, you can run regular x86 operating systems. On Thu, Jun 2, 2016 at 12:11 PM, Ken Rice <krice@freeswitch.org <mailto:krice@freeswitch.org> > wrote: The custom boards allow for hardware DTMF keypad interface, hook switch and a few other things like LCD for CLID on old school phones with that provision. There will be official Raspian packages sooner or later… theres a know issue with the cowbuilder that’s blocking this at this time, we’re working on a work around… From: freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> ] On Behalf Of William Scott Sent: Wednesday, June 1, 2016 6:52 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> > Subject: Re: [Freeswitch-users] SwitchPi Hi Yes, I have FusionPBX/freeSwitch running on a RPi3. Will the ARM build ever become "Official"? I've watched a 'tube video or two. What is the functionality of the custom boards? <https://mailtrack.io/trace/mail/d1a10f8bcbe53cd87724e18dfebb1cfaa57d5246383145.png> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
just to add, last time i compiled FS on rpi3 using a samsung evo plus card, it took like 25mins or so at most not to mention its getting powerful every year, now only if the codecs could make use of the neon in the processor. Regards, Bipin ------------------------------------------------------------------------ -------- Original Message -------- Subject: Re: [Freeswitch-users] SwitchPi From: Ken Rice <krice@freeswitch.org> To: 'FreeSWITCH Users Help' <freeswitch-users@lists.freeswitch.org> Date: 6/3/2016, 6:13:39 PM
Why the Pi you ask? Why custom hardware to go with it?
Generic X86 Hardware is not the end all be all. While the X86 based CPUs means that there can be less portability issues than say something like ARM or SPARC or other architectures, the PI still typically offers several other capabilities that may not be offered on the other Single Board Computers at a $35 price point.
Then there is the well documented pile of GPIO ports that make it quite easy to drive things like custom keypads, servos, steppers, etc etc etc… this means you can spin a small custom board (in my case its about 1.5 square inches) that has the specific additional hardware for adding an additional 24 GPIOs giving room for a combination of something like 36 buttons worth of keypads and 12 other dry contact inputs and outputs (if you use 12 of the GPIO pins to drive a keypad array you can get 36 buttons. Basic formula for max number of potential keys (n/2)^2 where n is the number of GPIO pins used in the keypad array.
Now mix that with that fact that ARM is not a second class Linux citizen anymore, we can pretty easily copy the source over compile and go. And things just work (barring the occasional endian issue that happens when taking software between architectures that are big vs little vs bi endian)
Now theres always talk of a new cheap x86 based SoC such as the Edison, or other Arm based SBC like the odriod, or the CHIP, but I have yet to see one that is as readily available as the Pi at the $35 with the myriad of addons and software already running on it.
(Yesterday I installed FreeSWITCH on a Pi and it took about 45 minutes… there was 1 issues with Faxing that we are looking into and its probably an endian issue)
*From:*freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Colton Conor *Sent:* Friday, June 3, 2016 7:59 AM *To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* Re: [Freeswitch-users] SwitchPi
May I ask the question of why make something customer just to run on the Rasberry Pi? There are X86 SOC coming to the market that will be close to the cost of the Pi, and be much more powerful. Plus, you can run regular x86 operating systems.
On Thu, Jun 2, 2016 at 12:11 PM, Ken Rice <krice@freeswitch.org <mailto:krice@freeswitch.org>> wrote:
The custom boards allow for hardware DTMF keypad interface, hook switch and a few other things like LCD for CLID on old school phones with that provision.
There will be official Raspian packages sooner or later… theres a know issue with the cowbuilder that’s blocking this at this time, we’re working on a work around…
*From:*freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *William Scott *Sent:* Wednesday, June 1, 2016 6:52 PM *To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org>> *Subject:* Re: [Freeswitch-users] SwitchPi
Hi
Yes, I have FusionPBX/freeSwitch running on a RPi3. Will the ARM build ever become "Official"?
I've watched a 'tube video or two. What is the functionality of the custom boards?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Ken, you probably hit this bug with faxing: https://freeswitch.org/jira/browse/FS-8651 we're still waiting for Steve's feedback on that one. On Fri, Jun 3, 2016 at 4:13 PM, Ken Rice <krice@freeswitch.org> wrote:
Why the Pi you ask? Why custom hardware to go with it?
Generic X86 Hardware is not the end all be all. While the X86 based CPUs means that there can be less portability issues than say something like ARM or SPARC or other architectures, the PI still typically offers several other capabilities that may not be offered on the other Single Board Computers at a $35 price point.
Then there is the well documented pile of GPIO ports that make it quite easy to drive things like custom keypads, servos, steppers, etc etc etc… this means you can spin a small custom board (in my case its about 1.5 square inches) that has the specific additional hardware for adding an additional 24 GPIOs giving room for a combination of something like 36 buttons worth of keypads and 12 other dry contact inputs and outputs (if you use 12 of the GPIO pins to drive a keypad array you can get 36 buttons. Basic formula for max number of potential keys (n/2)^2 where n is the number of GPIO pins used in the keypad array.
Now mix that with that fact that ARM is not a second class Linux citizen anymore, we can pretty easily copy the source over compile and go. And things just work (barring the occasional endian issue that happens when taking software between architectures that are big vs little vs bi endian)
Now theres always talk of a new cheap x86 based SoC such as the Edison, or other Arm based SBC like the odriod, or the CHIP, but I have yet to see one that is as readily available as the Pi at the $35 with the myriad of addons and software already running on it.
(Yesterday I installed FreeSWITCH on a Pi and it took about 45 minutes… there was 1 issues with Faxing that we are looking into and its probably an endian issue)
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Colton Conor *Sent:* Friday, June 3, 2016 7:59 AM
*To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* Re: [Freeswitch-users] SwitchPi
May I ask the question of why make something customer just to run on the Rasberry Pi? There are X86 SOC coming to the market that will be close to the cost of the Pi, and be much more powerful. Plus, you can run regular x86 operating systems.
On Thu, Jun 2, 2016 at 12:11 PM, Ken Rice <krice@freeswitch.org> wrote:
The custom boards allow for hardware DTMF keypad interface, hook switch and a few other things like LCD for CLID on old school phones with that provision.
There will be official Raspian packages sooner or later… theres a know issue with the cowbuilder that’s blocking this at this time, we’re working on a work around…
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *William Scott *Sent:* Wednesday, June 1, 2016 6:52 PM *To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* Re: [Freeswitch-users] SwitchPi
Hi
Yes, I have FusionPBX/freeSwitch running on a RPi3. Will the ARM build ever become "Official"?
I've watched a 'tube video or two. What is the functionality of the custom boards?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I asked steve about this and yes i have duplicated it. Looks like possibly an endian issue Sent from my iPhone
On Jun 3, 2016, at 7:11 PM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Ken, you probably hit this bug with faxing: https://freeswitch.org/jira/browse/FS-8651
we're still waiting for Steve's feedback on that one.
On Fri, Jun 3, 2016 at 4:13 PM, Ken Rice <krice@freeswitch.org> wrote: Why the Pi you ask? Why custom hardware to go with it?
Generic X86 Hardware is not the end all be all. While the X86 based CPUs means that there can be less portability issues than say something like ARM or SPARC or other architectures, the PI still typically offers several other capabilities that may not be offered on the other Single Board Computers at a $35 price point.
Then there is the well documented pile of GPIO ports that make it quite easy to drive things like custom keypads, servos, steppers, etc etc etc… this means you can spin a small custom board (in my case its about 1.5 square inches) that has the specific additional hardware for adding an additional 24 GPIOs giving room for a combination of something like 36 buttons worth of keypads and 12 other dry contact inputs and outputs (if you use 12 of the GPIO pins to drive a keypad array you can get 36 buttons. Basic formula for max number of potential keys (n/2)^2 where n is the number of GPIO pins used in the keypad array.
Now mix that with that fact that ARM is not a second class Linux citizen anymore, we can pretty easily copy the source over compile and go. And things just work (barring the occasional endian issue that happens when taking software between architectures that are big vs little vs bi endian)
Now theres always talk of a new cheap x86 based SoC such as the Edison, or other Arm based SBC like the odriod, or the CHIP, but I have yet to see one that is as readily available as the Pi at the $35 with the myriad of addons and software already running on it.
(Yesterday I installed FreeSWITCH on a Pi and it took about 45 minutes… there was 1 issues with Faxing that we are looking into and its probably an endian issue)
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Colton Conor Sent: Friday, June 3, 2016 7:59 AM
To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] SwitchPi
May I ask the question of why make something customer just to run on the Rasberry Pi? There are X86 SOC coming to the market that will be close to the cost of the Pi, and be much more powerful. Plus, you can run regular x86 operating systems.
On Thu, Jun 2, 2016 at 12:11 PM, Ken Rice <krice@freeswitch.org> wrote:
The custom boards allow for hardware DTMF keypad interface, hook switch and a few other things like LCD for CLID on old school phones with that provision.
There will be official Raspian packages sooner or later… theres a know issue with the cowbuilder that’s blocking this at this time, we’re working on a work around…
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of William Scott Sent: Wednesday, June 1, 2016 6:52 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] SwitchPi
Hi
Yes, I have FusionPBX/freeSwitch running on a RPi3. Will the ARM build ever become "Official"?
I've watched a 'tube video or two. What is the functionality of the custom boards?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
It's not about endianness, but pointer alignment. On Jun 4, 2016 02:54, "Ken Rice" <krice@freeswitch.org> wrote:
I asked steve about this and yes i have duplicated it. Looks like possibly an endian issue
Sent from my iPhone
On Jun 3, 2016, at 7:11 PM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
Ken, you probably hit this bug with faxing: https://freeswitch.org/jira/browse/FS-8651
we're still waiting for Steve's feedback on that one.
On Fri, Jun 3, 2016 at 4:13 PM, Ken Rice <krice@freeswitch.org> wrote:
Why the Pi you ask? Why custom hardware to go with it?
Generic X86 Hardware is not the end all be all. While the X86 based CPUs means that there can be less portability issues than say something like ARM or SPARC or other architectures, the PI still typically offers several other capabilities that may not be offered on the other Single Board Computers at a $35 price point.
Then there is the well documented pile of GPIO ports that make it quite easy to drive things like custom keypads, servos, steppers, etc etc etc… this means you can spin a small custom board (in my case its about 1.5 square inches) that has the specific additional hardware for adding an additional 24 GPIOs giving room for a combination of something like 36 buttons worth of keypads and 12 other dry contact inputs and outputs (if you use 12 of the GPIO pins to drive a keypad array you can get 36 buttons. Basic formula for max number of potential keys (n/2)^2 where n is the number of GPIO pins used in the keypad array.
Now mix that with that fact that ARM is not a second class Linux citizen anymore, we can pretty easily copy the source over compile and go. And things just work (barring the occasional endian issue that happens when taking software between architectures that are big vs little vs bi endian)
Now theres always talk of a new cheap x86 based SoC such as the Edison, or other Arm based SBC like the odriod, or the CHIP, but I have yet to see one that is as readily available as the Pi at the $35 with the myriad of addons and software already running on it.
(Yesterday I installed FreeSWITCH on a Pi and it took about 45 minutes… there was 1 issues with Faxing that we are looking into and its probably an endian issue)
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Colton Conor *Sent:* Friday, June 3, 2016 7:59 AM
*To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* Re: [Freeswitch-users] SwitchPi
May I ask the question of why make something customer just to run on the Rasberry Pi? There are X86 SOC coming to the market that will be close to the cost of the Pi, and be much more powerful. Plus, you can run regular x86 operating systems.
On Thu, Jun 2, 2016 at 12:11 PM, Ken Rice <krice@freeswitch.org> wrote:
The custom boards allow for hardware DTMF keypad interface, hook switch and a few other things like LCD for CLID on old school phones with that provision.
There will be official Raspian packages sooner or later… theres a know issue with the cowbuilder that’s blocking this at this time, we’re working on a work around…
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *William Scott *Sent:* Wednesday, June 1, 2016 6:52 PM *To:* FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> *Subject:* Re: [Freeswitch-users] SwitchPi
Hi
Yes, I have FusionPBX/freeSwitch running on a RPi3. Will the ARM build ever become "Official"?
I've watched a 'tube video or two. What is the functionality of the custom boards?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (5)
-
Bipin Patel
-
Colton Conor
-
Ken Rice
-
Stanislav Sinyagin
-
William Scott