Linksys Registration disappears after 5 minutes
Hi, I have a Linksys ATA (RPT300). I have it successfully Registering through a NAT connection. But, 5 minutes later FS no longer shows it registered. The RTP300 still says it is registered and can of course dial out, but not in. For what it is worth, this RTP300 has been working for months and months. Since we now have Polycom phones on this LAN, we had to enable SIP ALG and NDLB. Cisco phones and Polycom phones are all working great now, but I cannot figure out what setting to change in the Linksys device. There are no words to express how much I hate NAT and SIP. Thanks, Sean
Try going back to what you had that was working and instead of evil ALG etc: Set sofia profile param NDLB-force-rport to "safe" On Mon, Dec 17, 2012 at 7:44 PM, Sean Devoy <sdevoy@bizfocused.com> wrote:
Hi,****
** **
I have a Linksys ATA (RPT300). I have it successfully Registering through a NAT connection. But, 5 minutes later FS no longer shows it registered. The RTP300 still says it is registered and can of course dial out, but not in.****
** **
For what it is worth, this RTP300 has been working for months and months. Since we now have Polycom phones on this LAN, we had to enable SIP ALG and NDLB. Cisco phones and Polycom phones are all working great now, but I cannot figure out what setting to change in the Linksys device.****
** **
There are no words to express how much I hate NAT and SIP.****
** **
Thanks,****
Sean****
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
Anthony, Your killing me man! Without SIP ALG, I could not find any configuration to get 2 Polycom 335s Registered. NDLB-force-rport to "safe" - made no difference. I left rport to safe and tried removing : <variable name="sip-force-contact" value="NDLB-connectile-dysfunction"/> from this user. - WORKED!!! So on my FIOS router with SIP ALG on, Polycom and Cisco phones REQUIRE NDLB variable and LinkSys RPT300 CANNOT HAVE IT in the user profile. This is starting to feel a lot like witchcraft! Have you ever read about BF Skinner's pigeons that were given random reinforcement rewards? http://vidallena.org/skinpal.htm Thanks again, Sean From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale Sent: Monday, December 17, 2012 8:55 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Linksys Registration disappears after 5 minutes Try going back to what you had that was working and instead of evil ALG etc: Set sofia profile param NDLB-force-rport to "safe" On Mon, Dec 17, 2012 at 7:44 PM, Sean Devoy <sdevoy@bizfocused.com> wrote: Hi, I have a Linksys ATA (RPT300). I have it successfully Registering through a NAT connection. But, 5 minutes later FS no longer shows it registered. The RTP300 still says it is registered and can of course dial out, but not in. For what it is worth, this RTP300 has been working for months and months. Since we now have Polycom phones on this LAN, we had to enable SIP ALG and NDLB. Cisco phones and Polycom phones are all working great now, but I cannot figure out what setting to change in the Linksys device. There are no words to express how much I hate NAT and SIP. Thanks, Sean _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
Setting NDLB-force-rport to safe was specifically done for Polycoms On 12/17/12 8:40 PM, "Sean Devoy" <sdevoy@bizfocused.com> wrote:
Anthony, Your killing me man! Without SIP ALG, I could not find any configuration to get 2 Polycom 335s Registered.
NDLB-force-rport to "safe² - made no difference.
I left rport to safe and tried removing : <variable name="sip-force-contact" value="NDLB-connectile-dysfunction"/> from this user. - WORKED!!!
So on my FIOS router with SIP ALG on, Polycom and Cisco phones REQUIRE NDLB variable and LinkSys RPT300 CANNOT HAVE IT in the user profile. This is starting to feel a lot like witchcraft!
Have you ever read about BF Skinner¹s pigeons that were given random reinforcement rewards? http://vidallena.org/skinpal.htm
Thanks again, Sean
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale Sent: Monday, December 17, 2012 8:55 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Linksys Registration disappears after 5 minutes
Try going back to what you had that was working and instead of evil ALG etc:
Set sofia profile param NDLB-force-rport to "safe"
On Mon, Dec 17, 2012 at 7:44 PM, Sean Devoy <sdevoy@bizfocused.com> wrote:
Hi,
I have a Linksys ATA (RPT300). I have it successfully Registering through a NAT connection. But, 5 minutes later FS no longer shows it registered. The RTP300 still says it is registered and can of course dial out, but not in.
For what it is worth, this RTP300 has been working for months and months. Since we now have Polycom phones on this LAN, we had to enable SIP ALG and NDLB. Cisco phones and Polycom phones are all working great now, but I cannot figure out what setting to change in the Linksys device.
There are no words to express how much I hate NAT and SIP.
Thanks, Sean
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch
Unless you have a REALLY compelling reason there's nothing preventing you from making a two different SIP profiles: one for the Poly/Cisco and one for the Linksys. As long as you use the "user/xxxx" dialstring then FS won't care which profile the device is registered on. -MC On Mon, Dec 17, 2012 at 6:40 PM, Sean Devoy <sdevoy@bizfocused.com> wrote:
Anthony,****
Your killing me man! Without SIP ALG, I could not find any configuration to get 2 Polycom 335s Registered.****
** **
NDLB-force-rport to "safe” - made no difference.****
** **
I left rport to safe and tried *removing* :****
<variable name="sip-force-contact" value="NDLB-connectile-dysfunction"/> from this user. - WORKED!!!****
** **
So on my FIOS router with SIP ALG on, Polycom and Cisco phones REQUIRE NDLB variable and LinkSys RPT300 CANNOT HAVE IT in the user profile. This is starting to feel a lot like witchcraft! ****
** **
Have you ever read about BF Skinner’s pigeons that were given random reinforcement rewards? ****
http://vidallena.org/skinpal.htm****
** **
Thanks again,****
Sean****
** **
** **
** **
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Anthony Minessale *Sent:* Monday, December 17, 2012 8:55 PM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] Linksys Registration disappears after 5 minutes****
** **
Try going back to what you had that was working and instead of evil ALG etc:****
** **
Set sofia profile param NDLB-force-rport to "safe"****
** **
** **
On Mon, Dec 17, 2012 at 7:44 PM, Sean Devoy <sdevoy@bizfocused.com> wrote: ****
Hi,****
****
I have a Linksys ATA (RPT300). I have it successfully Registering through a NAT connection. But, 5 minutes later FS no longer shows it registered. The RTP300 still says it is registered and can of course dial out, but not in.****
****
For what it is worth, this RTP300 has been working for months and months. Since we now have Polycom phones on this LAN, we had to enable SIP ALG and NDLB. Cisco phones and Polycom phones are all working great now, but I cannot figure out what setting to change in the Linksys device.****
****
There are no words to express how much I hate NAT and SIP.****
****
Thanks,****
Sean****
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org****
****
** **
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900****
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org
participants (4)
-
Anthony Minessale
-
Ken Rice
-
Michael Collins
-
Sean Devoy