Patton 4554 as gateway for a FreeSwitch installation
Hi, Following the recommendations of this list, we went with an external gateway to connect to the BRI based ISDN network. We'd like to configure a Patoon 4554 2xBRI <-> SIP gateway with Freeswitch to connect to the public ISDN network. The freeswitch config seems quite straightforward, but we don't manage to get the Patton to register with the Freeswitch and vise versa. Does anybody have some insight/sample config/tips they can share with us on this? Honesty obliges me to say that our experience with the Patton product is quite limited, which is not a big help for such a complex product. Many thanks in advance! Frederik.
Posting a quick sip trace of the failed register will probably be helpful. Also, are the debug logs any help? Mike On Jun 29, 2009, at 11:11 AM, Frederik Denkens wrote:
Hi,
Following the recommendations of this list, we went with an external gateway to connect to the BRI based ISDN network.
We'd like to configure a Patoon 4554 2xBRI <-> SIP gateway with Freeswitch to connect to the public ISDN network. The freeswitch config seems quite straightforward, but we don't manage to get the Patton to register with the Freeswitch and vise versa.
Does anybody have some insight/sample config/tips they can share with us on this? Honesty obliges me to say that our experience with the Patton product is quite limited, which is not a big help for such a complex product.
hi i'm inalp patton certified, so maybe i can help if you can post your config (export startup config). please also describe your setup if i could get http+telnet access to the smartnode, the system would be registered in an minute br On 2009-06-29 17:11, Frederik Denkens wrote:
Hi,
Following the recommendations of this list, we went with an external gateway to connect to the BRI based ISDN network.
We'd like to configure a Patoon 4554 2xBRI<-> SIP gateway with Freeswitch to connect to the public ISDN network. The freeswitch config seems quite straightforward, but we don't manage to get the Patton to register with the Freeswitch and vise versa.
Does anybody have some insight/sample config/tips they can share with us on this? Honesty obliges me to say that our experience with the Patton product is quite limited, which is not a big help for such a complex product.
Many thanks in advance!
Frederik.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Ing. Christian Löschenkohl Technische Leitung, Forschung & Entwicklung VoIP xpirio Telekommunikation & Service GmbH Lakeside B04 9020 Klagenfurt Austria T +43 (0) 5 77 11 - 1000 F +43 (0) 5 77 11 - 1002 E christian.loeschenkohl@xpirio.com
If you come up with a good configuration, we would appretiate it if someone could post this to the wiki. Mike On Jun 29, 2009, at 11:52 AM, Christian Löschenkohl wrote:
hi
i'm inalp patton certified, so maybe i can help if you can post your config (export startup config). please also describe your setup if i could get http+telnet access to the smartnode, the system would be registered in an minute
br
participants (3)
-
Christian Löschenkohl
-
Frederik Denkens
-
Michael Jerris