mod_verto: Invalid Method, Missing Method or Permission Denied / Error code": -32601
Hi all, Looked too easy to be true… I’m all set up with FS and the Verto demo. I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt The error message is: Invalid Method, Missing Method or Permission Denied I’m not sure what to investigate here. Your suggestions are welcome! Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit Thanks
have you given permission to browser to use camera and microphone? also, with commercial certificates you don't need to import them. You just put them in the correct places in freeswitch config (pay attention you must concatenate some of them, and chains too), and that's it. Browser automatically accept commercial certificates... On Tue, Jan 19, 2016 at 11:40 PM, Emrah <lists@kavun.ch> wrote:
Hi all, Looked too easy to be true… I’m all set up with FS and the Verto demo. I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt
The error message is: Invalid Method, Missing Method or Permission Denied
I’m not sure what to investigate here. Your suggestions are welcome! Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit
Thanks
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
Giovanni, Yes permission is granted to camera and mike. Thanks for the clarification about importing the CA. In this case the CA was both stored on the server and on my client, I didn’t import anything. Reading the doc I had understood that the server also needed to be aware of its own CA, but your explanation makes more sense! I think the only grey zone here in my TLS setup is the stuff about the chain certificate. Is this the certificate that was used to sign my key? Is this the CA of my supplier? I’m really getting nothing out of FS as far as logs are concerned. If you have suggestions on how to make things more talkative I’d be grateful to know about them. Thanks!
On Jan 20, 2016, at 12:40 AM, Giovanni Maruzzelli <gmaruzz@gmail.com> wrote:
have you given permission to browser to use camera and microphone?
also, with commercial certificates you don't need to import them. You just put them in the correct places in freeswitch config (pay attention you must concatenate some of them, and chains too), and that's it. Browser automatically accept commercial certificates...
On Tue, Jan 19, 2016 at 11:40 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Hi all, Looked too easy to be true… I’m all set up with FS and the Verto demo. I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt <http://dmn.io/fs-verto-error.txt>
The error message is: Invalid Method, Missing Method or Permission Denied
I’m not sure what to investigate here. Your suggestions are welcome! Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit
Thanks
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Try putting the CERT followed by the KEY followed by your issuer's CHAIN CERT into a single text file and install that as wss.pem in the FS certs dir. On Wed, Jan 20, 2016 at 1:56 AM, Emrah <lists@kavun.ch> wrote:
Giovanni, Yes permission is granted to camera and mike. Thanks for the clarification about importing the CA. In this case the CA was both stored on the server and on my client, I didn’t import anything. Reading the doc I had understood that the server also needed to be aware of its own CA, but your explanation makes more sense! I think the only grey zone here in my TLS setup is the stuff about the chain certificate. Is this the certificate that was used to sign my key? Is this the CA of my supplier?
I’m really getting nothing out of FS as far as logs are concerned. If you have suggestions on how to make things more talkative I’d be grateful to know about them.
Thanks!
On Jan 20, 2016, at 12:40 AM, Giovanni Maruzzelli <gmaruzz@gmail.com> wrote:
have you given permission to browser to use camera and microphone?
also, with commercial certificates you don't need to import them. You just put them in the correct places in freeswitch config (pay attention you must concatenate some of them, and chains too), and that's it. Browser automatically accept commercial certificates...
On Tue, Jan 19, 2016 at 11:40 PM, Emrah <lists@kavun.ch> wrote:
Hi all, Looked too easy to be true… I’m all set up with FS and the Verto demo. I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt
The error message is: Invalid Method, Missing Method or Permission Denied
I’m not sure what to investigate here. Your suggestions are welcome! Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit
Thanks
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬ ☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞ http://twitter.com/FreeSWITCH ☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+ <http://freeswitch.org/g+>* ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org ☎ +19193869900 https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA
Hi Anthony, To be sure, I reinstalled my certificates. No improvement. I appreciate the suggestions so far. Any recommendation on what to try next? There isn’t enough verbose and I’m not going to be any good in analyzing the code to find out what triggers this error.
On Jan 20, 2016, at 5:36 PM, Anthony Minessale <anthony.minessale@gmail.com> wrote:
Try putting the CERT followed by the KEY followed by your issuer's CHAIN CERT into a single text file and install that as wss.pem in the FS certs dir.
On Wed, Jan 20, 2016 at 1:56 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Giovanni, Yes permission is granted to camera and mike. Thanks for the clarification about importing the CA. In this case the CA was both stored on the server and on my client, I didn’t import anything. Reading the doc I had understood that the server also needed to be aware of its own CA, but your explanation makes more sense! I think the only grey zone here in my TLS setup is the stuff about the chain certificate. Is this the certificate that was used to sign my key? Is this the CA of my supplier?
I’m really getting nothing out of FS as far as logs are concerned. If you have suggestions on how to make things more talkative I’d be grateful to know about them.
Thanks!
On Jan 20, 2016, at 12:40 AM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote:
have you given permission to browser to use camera and microphone?
also, with commercial certificates you don't need to import them. You just put them in the correct places in freeswitch config (pay attention you must concatenate some of them, and chains too), and that's it. Browser automatically accept commercial certificates...
On Tue, Jan 19, 2016 at 11:40 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Hi all, Looked too easy to be true… I’m all set up with FS and the Verto demo. I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt <http://dmn.io/fs-verto-error.txt>
The error message is: Invalid Method, Missing Method or Permission Denied
I’m not sure what to investigate here. Your suggestions are welcome! Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit
Thanks
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <tel:%2B39-347-2665618> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+>
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900
https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Emrah, have you installe the certificate and the chain as instructed by Tony? Here a couple references: https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCe... https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#Fr... On Wed, Jan 20, 2016 at 8:41 PM, Emrah <lists@kavun.ch> wrote:
Hi Anthony, To be sure, I reinstalled my certificates. No improvement.
I appreciate the suggestions so far. Any recommendation on what to try next? There isn’t enough verbose and I’m not going to be any good in analyzing the code to find out what triggers this error.
On Jan 20, 2016, at 5:36 PM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
Try putting the CERT followed by the KEY followed by your issuer's CHAIN CERT into a single text file and install that as wss.pem in the FS certs dir.
On Wed, Jan 20, 2016 at 1:56 AM, Emrah <lists@kavun.ch> wrote:
Giovanni, Yes permission is granted to camera and mike. Thanks for the clarification about importing the CA. In this case the CA was both stored on the server and on my client, I didn’t import anything. Reading the doc I had understood that the server also needed to be aware of its own CA, but your explanation makes more sense! I think the only grey zone here in my TLS setup is the stuff about the chain certificate. Is this the certificate that was used to sign my key? Is this the CA of my supplier?
I’m really getting nothing out of FS as far as logs are concerned. If you have suggestions on how to make things more talkative I’d be grateful to know about them.
Thanks!
On Jan 20, 2016, at 12:40 AM, Giovanni Maruzzelli <gmaruzz@gmail.com> wrote:
have you given permission to browser to use camera and microphone?
also, with commercial certificates you don't need to import them. You just put them in the correct places in freeswitch config (pay attention you must concatenate some of them, and chains too), and that's it. Browser automatically accept commercial certificates...
On Tue, Jan 19, 2016 at 11:40 PM, Emrah <lists@kavun.ch> wrote:
Hi all, Looked too easy to be true… I’m all set up with FS and the Verto demo. I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt
The error message is: Invalid Method, Missing Method or Permission Denied
I’m not sure what to investigate here. Your suggestions are welcome! Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit
Thanks
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞ http://twitter.com/FreeSWITCH ☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+ <http://freeswitch.org/g+>*
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org ☎ +19193869900
https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <http://www.freeswitch.org>
Yes absolutely WSS-BIND-URL sips:mod_sofia@5.6.7.8:7443;transport=wss This is my WSS binding URL with Sofia. TLS works generally, but it’s the first time I see this port number as far as the WSS binding goes. My verto.conf.xml has this: <param name=“bind-local" value="$${local_ip_v4}:8082" secure="true"/> The only doubt I have is about the chain component in my wss.pem. I’ve tried all the logical options, combining the CA with the issuing certificate, the CA alone, etc… Running out of ideas! Thanks for your inputs guys
On Jan 20, 2016, at 8:47 PM, Giovanni Maruzzelli <gmaruzz@gmail.com> wrote:
Emrah,
have you installe the certificate and the chain as instructed by Tony?
Here a couple references: https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCe... <https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCertificates>
https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#Fr... <https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#FreeSWITCH1.6Video-Certificates>
On Wed, Jan 20, 2016 at 8:41 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Hi Anthony, To be sure, I reinstalled my certificates. No improvement.
I appreciate the suggestions so far. Any recommendation on what to try next? There isn’t enough verbose and I’m not going to be any good in analyzing the code to find out what triggers this error.
On Jan 20, 2016, at 5:36 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote:
Try putting the CERT followed by the KEY followed by your issuer's CHAIN CERT into a single text file and install that as wss.pem in the FS certs dir.
On Wed, Jan 20, 2016 at 1:56 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Giovanni, Yes permission is granted to camera and mike. Thanks for the clarification about importing the CA. In this case the CA was both stored on the server and on my client, I didn’t import anything. Reading the doc I had understood that the server also needed to be aware of its own CA, but your explanation makes more sense! I think the only grey zone here in my TLS setup is the stuff about the chain certificate. Is this the certificate that was used to sign my key? Is this the CA of my supplier?
I’m really getting nothing out of FS as far as logs are concerned. If you have suggestions on how to make things more talkative I’d be grateful to know about them.
Thanks!
On Jan 20, 2016, at 12:40 AM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote:
have you given permission to browser to use camera and microphone?
also, with commercial certificates you don't need to import them. You just put them in the correct places in freeswitch config (pay attention you must concatenate some of them, and chains too), and that's it. Browser automatically accept commercial certificates...
On Tue, Jan 19, 2016 at 11:40 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Hi all, Looked too easy to be true… I’m all set up with FS and the Verto demo. I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt <http://dmn.io/fs-verto-error.txt>
The error message is: Invalid Method, Missing Method or Permission Denied
I’m not sure what to investigate here. Your suggestions are welcome! Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit
Thanks
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <tel:%2B39-347-2665618> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+>
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900 <tel:%2B19193869900>
https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
OK ipv6 isn’t the problem either. Just forced my NIC to ipv4.
On Jan 21, 2016, at 12:57 AM, Emrah <lists@kavun.ch> wrote:
Yes absolutely WSS-BIND-URL sips:mod_sofia@5.6.7.8:7443;transport=wss This is my WSS binding URL with Sofia. TLS works generally, but it’s the first time I see this port number as far as the WSS binding goes. My verto.conf.xml has this: <param name=“bind-local" value="$${local_ip_v4}:8082" secure="true"/>
The only doubt I have is about the chain component in my wss.pem. I’ve tried all the logical options, combining the CA with the issuing certificate, the CA alone, etc…
Running out of ideas!
Thanks for your inputs guys
On Jan 20, 2016, at 8:47 PM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote:
Emrah,
have you installe the certificate and the chain as instructed by Tony?
Here a couple references: https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCe... <https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCertificates>
https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#Fr... <https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#FreeSWITCH1.6Video-Certificates>
On Wed, Jan 20, 2016 at 8:41 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Hi Anthony, To be sure, I reinstalled my certificates. No improvement.
I appreciate the suggestions so far. Any recommendation on what to try next? There isn’t enough verbose and I’m not going to be any good in analyzing the code to find out what triggers this error.
On Jan 20, 2016, at 5:36 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote:
Try putting the CERT followed by the KEY followed by your issuer's CHAIN CERT into a single text file and install that as wss.pem in the FS certs dir.
On Wed, Jan 20, 2016 at 1:56 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Giovanni, Yes permission is granted to camera and mike. Thanks for the clarification about importing the CA. In this case the CA was both stored on the server and on my client, I didn’t import anything. Reading the doc I had understood that the server also needed to be aware of its own CA, but your explanation makes more sense! I think the only grey zone here in my TLS setup is the stuff about the chain certificate. Is this the certificate that was used to sign my key? Is this the CA of my supplier?
I’m really getting nothing out of FS as far as logs are concerned. If you have suggestions on how to make things more talkative I’d be grateful to know about them.
Thanks!
On Jan 20, 2016, at 12:40 AM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote:
have you given permission to browser to use camera and microphone?
also, with commercial certificates you don't need to import them. You just put them in the correct places in freeswitch config (pay attention you must concatenate some of them, and chains too), and that's it. Browser automatically accept commercial certificates...
On Tue, Jan 19, 2016 at 11:40 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Hi all, Looked too easy to be true… I’m all set up with FS and the Verto demo. I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt <http://dmn.io/fs-verto-error.txt>
The error message is: Invalid Method, Missing Method or Permission Denied
I’m not sure what to investigate here. Your suggestions are welcome! Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit
Thanks
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <tel:%2B39-347-2665618> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+>
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900 <tel:%2B19193869900>
https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
One more message to clarify what I sent earlier. I do have ipv6 bindings in my verto.conf.xml. I forgot to paste the relevant line for that. I also went hunting for the WSS binding parameter in my sofia.conf.xml and understand things better already. To sum up: I can log in from Verto. But I can’t make calls.
On Jan 21, 2016, at 1:23 AM, Emrah <lists@kavun.ch> wrote:
OK ipv6 isn’t the problem either. Just forced my NIC to ipv4.
On Jan 21, 2016, at 12:57 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
Yes absolutely WSS-BIND-URL sips:mod_sofia@5.6.7.8:7443;transport=wss This is my WSS binding URL with Sofia. TLS works generally, but it’s the first time I see this port number as far as the WSS binding goes. My verto.conf.xml has this: <param name=“bind-local" value="$${local_ip_v4}:8082" secure="true"/>
The only doubt I have is about the chain component in my wss.pem. I’ve tried all the logical options, combining the CA with the issuing certificate, the CA alone, etc…
Running out of ideas!
Thanks for your inputs guys
On Jan 20, 2016, at 8:47 PM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote:
Emrah,
have you installe the certificate and the chain as instructed by Tony?
Here a couple references: https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCe... <https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCertificates>
https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#Fr... <https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#FreeSWITCH1.6Video-Certificates>
On Wed, Jan 20, 2016 at 8:41 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Hi Anthony, To be sure, I reinstalled my certificates. No improvement.
I appreciate the suggestions so far. Any recommendation on what to try next? There isn’t enough verbose and I’m not going to be any good in analyzing the code to find out what triggers this error.
On Jan 20, 2016, at 5:36 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote:
Try putting the CERT followed by the KEY followed by your issuer's CHAIN CERT into a single text file and install that as wss.pem in the FS certs dir.
On Wed, Jan 20, 2016 at 1:56 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Giovanni, Yes permission is granted to camera and mike. Thanks for the clarification about importing the CA. In this case the CA was both stored on the server and on my client, I didn’t import anything. Reading the doc I had understood that the server also needed to be aware of its own CA, but your explanation makes more sense! I think the only grey zone here in my TLS setup is the stuff about the chain certificate. Is this the certificate that was used to sign my key? Is this the CA of my supplier?
I’m really getting nothing out of FS as far as logs are concerned. If you have suggestions on how to make things more talkative I’d be grateful to know about them.
Thanks!
On Jan 20, 2016, at 12:40 AM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote:
have you given permission to browser to use camera and microphone?
also, with commercial certificates you don't need to import them. You just put them in the correct places in freeswitch config (pay attention you must concatenate some of them, and chains too), and that's it. Browser automatically accept commercial certificates...
On Tue, Jan 19, 2016 at 11:40 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Hi all, Looked too easy to be true… I’m all set up with FS and the Verto demo. I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt <http://dmn.io/fs-verto-error.txt>
The error message is: Invalid Method, Missing Method or Permission Denied
I’m not sure what to investigate here. Your suggestions are welcome! Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit
Thanks
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <tel:%2B39-347-2665618> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+>
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900 <tel:%2B19193869900>
https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Configs based on the default configs from 1.6?
On Jan 20, 2016, at 7:37 PM, Emrah <lists@kavun.ch> wrote:
One more message to clarify what I sent earlier. I do have ipv6 bindings in my verto.conf.xml. I forgot to paste the relevant line for that. I also went hunting for the WSS binding parameter in my sofia.conf.xml and understand things better already.
To sum up: I can log in from Verto. But I can’t make calls.
On Jan 21, 2016, at 1:23 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
OK ipv6 isn’t the problem either. Just forced my NIC to ipv4.
On Jan 21, 2016, at 12:57 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
Yes absolutely WSS-BIND-URL sips:mod_sofia@5.6.7.8:7443;transport=wss This is my WSS binding URL with Sofia. TLS works generally, but it’s the first time I see this port number as far as the WSS binding goes. My verto.conf.xml has this: <param name=“bind-local" value="$${local_ip_v4}:8082" secure="true"/>
The only doubt I have is about the chain component in my wss.pem. I’ve tried all the logical options, combining the CA with the issuing certificate, the CA alone, etc…
Running out of ideas!
Thanks for your inputs guys
On Jan 20, 2016, at 8:47 PM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote:
Emrah,
have you installe the certificate and the chain as instructed by Tony?
Here a couple references: https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCe... <https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCertificates>
https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#Fr... <https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#FreeSWITCH1.6Video-Certificates>
On Wed, Jan 20, 2016 at 8:41 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Hi Anthony, To be sure, I reinstalled my certificates. No improvement.
I appreciate the suggestions so far. Any recommendation on what to try next? There isn’t enough verbose and I’m not going to be any good in analyzing the code to find out what triggers this error.
On Jan 20, 2016, at 5:36 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote:
Try putting the CERT followed by the KEY followed by your issuer's CHAIN CERT into a single text file and install that as wss.pem in the FS certs dir.
On Wed, Jan 20, 2016 at 1:56 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Giovanni, Yes permission is granted to camera and mike. Thanks for the clarification about importing the CA. In this case the CA was both stored on the server and on my client, I didn’t import anything. Reading the doc I had understood that the server also needed to be aware of its own CA, but your explanation makes more sense! I think the only grey zone here in my TLS setup is the stuff about the chain certificate. Is this the certificate that was used to sign my key? Is this the CA of my supplier?
I’m really getting nothing out of FS as far as logs are concerned. If you have suggestions on how to make things more talkative I’d be grateful to know about them.
Thanks!
On Jan 20, 2016, at 12:40 AM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote:
have you given permission to browser to use camera and microphone?
also, with commercial certificates you don't need to import them. You just put them in the correct places in freeswitch config (pay attention you must concatenate some of them, and chains too), and that's it. Browser automatically accept commercial certificates...
On Tue, Jan 19, 2016 at 11:40 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Hi all, Looked too easy to be true… I’m all set up with FS and the Verto demo. I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt <http://dmn.io/fs-verto-error.txt>
The error message is: Invalid Method, Missing Method or Permission Denied
I’m not sure what to investigate here. Your suggestions are welcome! Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit
Thanks
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <tel:%2B39-347-2665618> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+>
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900 <tel:%2B19193869900>
https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Yes, except users in the directory, all profiles and modules have their default configs. E
On Jan 21, 2016, at 2:07 AM, Michael Jerris <mike@jerris.com> wrote:
Configs based on the default configs from 1.6?
On Jan 20, 2016, at 7:37 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
One more message to clarify what I sent earlier. I do have ipv6 bindings in my verto.conf.xml. I forgot to paste the relevant line for that. I also went hunting for the WSS binding parameter in my sofia.conf.xml and understand things better already.
To sum up: I can log in from Verto. But I can’t make calls.
On Jan 21, 2016, at 1:23 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
OK ipv6 isn’t the problem either. Just forced my NIC to ipv4.
On Jan 21, 2016, at 12:57 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
Yes absolutely WSS-BIND-URL sips:mod_sofia@5.6.7.8:7443;transport=wss This is my WSS binding URL with Sofia. TLS works generally, but it’s the first time I see this port number as far as the WSS binding goes. My verto.conf.xml has this: <param name=“bind-local" value="$${local_ip_v4}:8082" secure="true"/>
The only doubt I have is about the chain component in my wss.pem. I’ve tried all the logical options, combining the CA with the issuing certificate, the CA alone, etc…
Running out of ideas!
Thanks for your inputs guys
On Jan 20, 2016, at 8:47 PM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote:
Emrah,
have you installe the certificate and the chain as instructed by Tony?
Here a couple references: https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCe... <https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCertificates>
https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#Fr... <https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#FreeSWITCH1.6Video-Certificates>
On Wed, Jan 20, 2016 at 8:41 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Hi Anthony, To be sure, I reinstalled my certificates. No improvement.
I appreciate the suggestions so far. Any recommendation on what to try next? There isn’t enough verbose and I’m not going to be any good in analyzing the code to find out what triggers this error.
On Jan 20, 2016, at 5:36 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote:
Try putting the CERT followed by the KEY followed by your issuer's CHAIN CERT into a single text file and install that as wss.pem in the FS certs dir.
On Wed, Jan 20, 2016 at 1:56 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Giovanni, Yes permission is granted to camera and mike. Thanks for the clarification about importing the CA. In this case the CA was both stored on the server and on my client, I didn’t import anything. Reading the doc I had understood that the server also needed to be aware of its own CA, but your explanation makes more sense! I think the only grey zone here in my TLS setup is the stuff about the chain certificate. Is this the certificate that was used to sign my key? Is this the CA of my supplier?
I’m really getting nothing out of FS as far as logs are concerned. If you have suggestions on how to make things more talkative I’d be grateful to know about them.
Thanks!
> On Jan 20, 2016, at 12:40 AM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote: > > have you given permission to browser to use camera and microphone? > > also, with commercial certificates you don't need to import them. You just put them in the correct places in freeswitch config (pay attention you must concatenate some of them, and chains too), and that's it. Browser automatically accept commercial certificates... > > On Tue, Jan 19, 2016 at 11:40 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: > Hi all, > Looked too easy to be true… I’m all set up with FS and the Verto demo. > I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. > I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. > There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt <http://dmn.io/fs-verto-error.txt> > > The error message is: Invalid Method, Missing Method or Permission Denied > > I’m not sure what to investigate here. Your suggestions are welcome! > Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit > > Thanks > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> > > Official FreeSWITCH Sites > http://www.freeswitch.org <http://www.freeswitch.org/> > http://confluence.freeswitch.org <http://confluence.freeswitch.org/> > http://www.cluecon.com <http://www.cluecon.com/> > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> > http://www.freeswitch.org <http://www.freeswitch.org/> > > > > -- > Sincerely, > > Giovanni Maruzzelli > Cell : +39-347-2665618 <tel:%2B39-347-2665618> > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> > > Official FreeSWITCH Sites > http://www.freeswitch.org <http://www.freeswitch.org/> > http://confluence.freeswitch.org <http://confluence.freeswitch.org/> > http://www.cluecon.com <http://www.cluecon.com/> > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> > http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+>
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900 <tel:%2B19193869900>
https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Thu, Jan 21, 2016 at 12:28 PM, Emrah <lists@kavun.ch> wrote:
Yes, except users in the directory, all profiles and modules have their default configs.
E
On Jan 21, 2016, at 2:07 AM, Michael Jerris <mike@jerris.com> wrote:
Configs based on the default configs from 1.6?
Well, I would start it all anew from scratch. Maybe there was something overlooked... Btw, are you aware that the preferred platform is debian 8 jessie, while centos 7 is supported too (and all other distros are unsupported at the moment) ?
Thanks Giovanni. Using Debian 8 Jessie. I’ll go ahead and restart see where i could have gone wrong. If I find something I’ll put it here. Is there anyone familiar with the error though, and what can cause it? Thanks
On Jan 21, 2016, at 3:36 PM, Giovanni Maruzzelli <gmaruzz@gmail.com> wrote:
On Thu, Jan 21, 2016 at 12:28 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Yes, except users in the directory, all profiles and modules have their default configs.
E
On Jan 21, 2016, at 2:07 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
Configs based on the default configs from 1.6?
Well, I would start it all anew from scratch. Maybe there was something overlooked...
Btw, are you aware that the preferred platform is debian 8 jessie, while centos 7 is supported too (and all other distros are unsupported at the moment) ?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
from the directory default.xml in the default configs: <!-- These are required for Verto to function properly --> <param name="jsonrpc-allowed-methods" value="verto"/>
On Jan 21, 2016, at 6:28 AM, Emrah <lists@kavun.ch> wrote:
Yes, except users in the directory, all profiles and modules have their default configs.
E
On Jan 21, 2016, at 2:07 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
Configs based on the default configs from 1.6?
On Jan 20, 2016, at 7:37 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
One more message to clarify what I sent earlier. I do have ipv6 bindings in my verto.conf.xml. I forgot to paste the relevant line for that. I also went hunting for the WSS binding parameter in my sofia.conf.xml and understand things better already.
To sum up: I can log in from Verto. But I can’t make calls.
On Jan 21, 2016, at 1:23 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
OK ipv6 isn’t the problem either. Just forced my NIC to ipv4.
On Jan 21, 2016, at 12:57 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
Yes absolutely WSS-BIND-URL sips:mod_sofia@5.6.7.8:7443;transport=wss This is my WSS binding URL with Sofia. TLS works generally, but it’s the first time I see this port number as far as the WSS binding goes. My verto.conf.xml has this: <param name=“bind-local" value="$${local_ip_v4}:8082" secure="true"/>
The only doubt I have is about the chain component in my wss.pem. I’ve tried all the logical options, combining the CA with the issuing certificate, the CA alone, etc…
Running out of ideas!
Thanks for your inputs guys
On Jan 20, 2016, at 8:47 PM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote:
Emrah,
have you installe the certificate and the chain as instructed by Tony?
Here a couple references: https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCe... <https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCertificates>
https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#Fr... <https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#FreeSWITCH1.6Video-Certificates>
On Wed, Jan 20, 2016 at 8:41 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: Hi Anthony, To be sure, I reinstalled my certificates. No improvement.
I appreciate the suggestions so far. Any recommendation on what to try next? There isn’t enough verbose and I’m not going to be any good in analyzing the code to find out what triggers this error. > On Jan 20, 2016, at 5:36 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote: > > Try putting the CERT followed by the KEY followed by your issuer's CHAIN CERT into a single text file and install that as wss.pem in the FS certs dir. > > > On Wed, Jan 20, 2016 at 1:56 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: > Giovanni, > Yes permission is granted to camera and mike. > Thanks for the clarification about importing the CA. In this case the CA was both stored on the server and on my client, I didn’t import anything. Reading the doc I had understood that the server also needed to be aware of its own CA, but your explanation makes more sense! > I think the only grey zone here in my TLS setup is the stuff about the chain certificate. Is this the certificate that was used to sign my key? Is this the CA of my supplier? > > I’m really getting nothing out of FS as far as logs are concerned. If you have suggestions on how to make things more talkative I’d be grateful to know about them. > > Thanks! > >> On Jan 20, 2016, at 12:40 AM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote: >> >> have you given permission to browser to use camera and microphone? >> >> also, with commercial certificates you don't need to import them. You just put them in the correct places in freeswitch config (pay attention you must concatenate some of them, and chains too), and that's it. Browser automatically accept commercial certificates... >> >> On Tue, Jan 19, 2016 at 11:40 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: >> Hi all, >> Looked too easy to be true… I’m all set up with FS and the Verto demo. >> I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. >> I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. >> There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt <http://dmn.io/fs-verto-error.txt> >> >> The error message is: Invalid Method, Missing Method or Permission Denied >> >> I’m not sure what to investigate here. Your suggestions are welcome! >> Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit >> >> Thanks >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org <mailto:consulting@freeswitch.org> >> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org <http://www.freeswitch.org/> >> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> >> http://www.cluecon.com <http://www.cluecon.com/> >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> >> http://www.freeswitch.org <http://www.freeswitch.org/> >> >> >> >> -- >> Sincerely, >> >> Giovanni Maruzzelli >> Cell : +39-347-2665618 <tel:%2B39-347-2665618> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org <mailto:consulting@freeswitch.org> >> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org <http://www.freeswitch.org/> >> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> >> http://www.cluecon.com <http://www.cluecon.com/> >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> >> http://www.freeswitch.org <http://www.freeswitch.org/> > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> > > Official FreeSWITCH Sites > http://www.freeswitch.org <http://www.freeswitch.org/> > http://confluence.freeswitch.org <http://confluence.freeswitch.org/> > http://www.cluecon.com <http://www.cluecon.com/> > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> > http://www.freeswitch.org <http://www.freeswitch.org/> > > > > -- > Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬ > > ☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> > ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+> > > ClueCon Weekly Development Call > ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900 <tel:%2B19193869900> > > https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> > https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA> > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> > > Official FreeSWITCH Sites > http://www.freeswitch.org <http://www.freeswitch.org/> > http://confluence.freeswitch.org <http://confluence.freeswitch.org/> > http://www.cluecon.com <http://www.cluecon.com/> > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> > http://www.freeswitch.org <http://www.freeswitch.org/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <http://www.freeswitch.org/> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Michael, I am so very grateful for this. It did it. Thank you very much! I think this should definitely be more prevailing in the documentation. Again thanks a lot!
On Jan 21, 2016, at 6:12 PM, Michael Jerris <mike@jerris.com> wrote:
from the directory default.xml in the default configs:
<!-- These are required for Verto to function properly --> <param name="jsonrpc-allowed-methods" value="verto"/>
On Jan 21, 2016, at 6:28 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
Yes, except users in the directory, all profiles and modules have their default configs.
E
On Jan 21, 2016, at 2:07 AM, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>> wrote:
Configs based on the default configs from 1.6?
On Jan 20, 2016, at 7:37 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
One more message to clarify what I sent earlier. I do have ipv6 bindings in my verto.conf.xml. I forgot to paste the relevant line for that. I also went hunting for the WSS binding parameter in my sofia.conf.xml and understand things better already.
To sum up: I can log in from Verto. But I can’t make calls.
On Jan 21, 2016, at 1:23 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
OK ipv6 isn’t the problem either. Just forced my NIC to ipv4.
On Jan 21, 2016, at 12:57 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
Yes absolutely WSS-BIND-URL sips:mod_sofia@5.6.7.8:7443;transport=wss This is my WSS binding URL with Sofia. TLS works generally, but it’s the first time I see this port number as far as the WSS binding goes. My verto.conf.xml has this: <param name=“bind-local" value="$${local_ip_v4}:8082" secure="true"/>
The only doubt I have is about the chain component in my wss.pem. I’ve tried all the logical options, combining the CA with the issuing certificate, the CA alone, etc…
Running out of ideas!
Thanks for your inputs guys > On Jan 20, 2016, at 8:47 PM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote: > > Emrah, > > have you installe the certificate and the chain as instructed by Tony? > > Here a couple references: > https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCe... <https://freeswitch.org/confluence/display/FREESWITCH/WebRTC#WebRTC-InstallCertificates> > > https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#Fr... <https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Video#FreeSWITCH1.6Video-Certificates> > > On Wed, Jan 20, 2016 at 8:41 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: > Hi Anthony, > To be sure, I reinstalled my certificates. No improvement. > > I appreciate the suggestions so far. Any recommendation on what to try next? There isn’t enough verbose and I’m not going to be any good in analyzing the code to find out what triggers this error. >> On Jan 20, 2016, at 5:36 PM, Anthony Minessale <anthony.minessale@gmail.com <mailto:anthony.minessale@gmail.com>> wrote: >> >> Try putting the CERT followed by the KEY followed by your issuer's CHAIN CERT into a single text file and install that as wss.pem in the FS certs dir. >> >> >> On Wed, Jan 20, 2016 at 1:56 AM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: >> Giovanni, >> Yes permission is granted to camera and mike. >> Thanks for the clarification about importing the CA. In this case the CA was both stored on the server and on my client, I didn’t import anything. Reading the doc I had understood that the server also needed to be aware of its own CA, but your explanation makes more sense! >> I think the only grey zone here in my TLS setup is the stuff about the chain certificate. Is this the certificate that was used to sign my key? Is this the CA of my supplier? >> >> I’m really getting nothing out of FS as far as logs are concerned. If you have suggestions on how to make things more talkative I’d be grateful to know about them. >> >> Thanks! >> >>> On Jan 20, 2016, at 12:40 AM, Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote: >>> >>> have you given permission to browser to use camera and microphone? >>> >>> also, with commercial certificates you don't need to import them. You just put them in the correct places in freeswitch config (pay attention you must concatenate some of them, and chains too), and that's it. Browser automatically accept commercial certificates... >>> >>> On Tue, Jan 19, 2016 at 11:40 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote: >>> Hi all, >>> Looked too easy to be true… I’m all set up with FS and the Verto demo. >>> I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. >>> I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. >>> There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt <http://dmn.io/fs-verto-error.txt> >>> >>> The error message is: Invalid Method, Missing Method or Permission Denied >>> >>> I’m not sure what to investigate here. Your suggestions are welcome! >>> Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit >>> >>> Thanks >>> >>> _________________________________________________________________________ >>> Professional FreeSWITCH Consulting Services: >>> consulting@freeswitch.org <mailto:consulting@freeswitch.org> >>> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> >>> >>> Official FreeSWITCH Sites >>> http://www.freeswitch.org <http://www.freeswitch.org/> >>> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> >>> http://www.cluecon.com <http://www.cluecon.com/> >>> >>> FreeSWITCH-users mailing list >>> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> >>> http://www.freeswitch.org <http://www.freeswitch.org/> >>> >>> >>> >>> -- >>> Sincerely, >>> >>> Giovanni Maruzzelli >>> Cell : +39-347-2665618 <tel:%2B39-347-2665618> >>> _________________________________________________________________________ >>> Professional FreeSWITCH Consulting Services: >>> consulting@freeswitch.org <mailto:consulting@freeswitch.org> >>> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> >>> >>> Official FreeSWITCH Sites >>> http://www.freeswitch.org <http://www.freeswitch.org/> >>> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> >>> http://www.cluecon.com <http://www.cluecon.com/> >>> >>> FreeSWITCH-users mailing list >>> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> >>> http://www.freeswitch.org <http://www.freeswitch.org/> >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org <mailto:consulting@freeswitch.org> >> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org <http://www.freeswitch.org/> >> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> >> http://www.cluecon.com <http://www.cluecon.com/> >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> >> http://www.freeswitch.org <http://www.freeswitch.org/> >> >> >> >> -- >> Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬ >> >> ☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> >> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+> >> >> ClueCon Weekly Development Call >> ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900 <tel:%2B19193869900> >> >> https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> >> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org <mailto:consulting@freeswitch.org> >> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org <http://www.freeswitch.org/> >> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> >> http://www.cluecon.com <http://www.cluecon.com/> >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> >> http://www.freeswitch.org <http://www.freeswitch.org/> > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> > > Official FreeSWITCH Sites > http://www.freeswitch.org <http://www.freeswitch.org/> > http://confluence.freeswitch.org <http://confluence.freeswitch.org/> > http://www.cluecon.com <http://www.cluecon.com/> > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> > http://www.freeswitch.org > > -- > Sincerely, > > Giovanni Maruzzelli > Cell : +39-347-2665618 > <http://www.freeswitch.org/> > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> > > Official FreeSWITCH Sites > http://www.freeswitch.org <http://www.freeswitch.org/> > http://confluence.freeswitch.org <http://confluence.freeswitch.org/> > http://www.cluecon.com <http://www.cluecon.com/> > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
what does the freeswitch debug log say?
On Jan 19, 2016, at 5:40 PM, Emrah <lists@kavun.ch> wrote:
Hi all, Looked too easy to be true… I’m all set up with FS and the Verto demo. I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt <http://dmn.io/fs-verto-error.txt>
The error message is: Invalid Method, Missing Method or Permission Denied
I’m not sure what to investigate here. Your suggestions are welcome! Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit
Thanks _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi there, There is nothing. This is as far as it goes. No dial plan execution, nothing that says the SDP failed with FS, etc… If you know how I could get more verbose from FS I’m sure it would help. Access to the microphone and camera are granted. Could this be IPv6 related? Thanks!
On Jan 20, 2016, at 12:40 AM, Michael Jerris <mike@jerris.com> wrote:
what does the freeswitch debug log say?
On Jan 19, 2016, at 5:40 PM, Emrah <lists@kavun.ch <mailto:lists@kavun.ch>> wrote:
Hi all, Looked too easy to be true… I’m all set up with FS and the Verto demo. I use commercial certificates, the cA is already in my distrib, and everything seemed to work well. I can log in from the Verto page… Except when I attempt to make a call, it miserably fails with error code": -32601. I did my Google homework with no luck. Some stuff seem to point to the CA needing to be imported, but not sure where I could have gone wrong there. There is hardly any verbose… But a debug output is here: http://dmn.io/fs-verto-error.txt <http://dmn.io/fs-verto-error.txt>
The error message is: Invalid Method, Missing Method or Permission Denied
I’m not sure what to investigate here. Your suggestions are welcome! Running FreeSWITCH Version 1.6.5-11-d5520a6~64bit
Thanks _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Anthony Minessale
-
Emrah
-
Giovanni Maruzzelli
-
Michael Jerris