Hi All, Does someone used net2phone with freeswitch. I am having no audio problem, below is my sip trace and sofia setting. Please let me know did I miss something? SIP/2.0 183 Session Progress Via: SIP/2.0/UDP 10.178.239.32;branch=z9hG4bKZ38e140yHZSye;received=208.86.251.68;rport=5060 From: "Prod" <sip:Prod@10.178.239.32>;tag=epH2avec6ZXmm To: <sip:99901134346556@66.33.147.149
;tag=sbcsipuas_1_C50986_20140501113400982_b12sb08 Call-ID: ebeedfce-4be8-1232-63b0-00123f20329d Contact: <sip:66.33.147.149:5060> CSeq: 59143169 INVITE Server: sbc_3 Content-Type: application/sdp Content-Length: 152
v=0 o=SBCSIPUAS 1696166055 1 IN IP4 10.50.2.40 s=SBCSIPUAS SIP STACK v1.0 c=IN IP4 10.50.2.40 t=0 0 m=audio 23194 RTP/AVP 0 a=rtpmap:0 PCMU/8000 ---------------------------------------------------------- aggressive-nat-detection [true] all-reg-options-ping [true] apply-inbound-acl [default] auth-calls [true] context [Inbound_Route] debug [info] dialplan [XML] disable-transcoding [true] disable-transfer [true] dtmf-duration [2000] enable-100rel [false] enable-timer [false] force-subscription-expires [60] ignore-183nosdp [no] inbound-bypass-media [true] inbound-codec-negotiation [generous] inbound-codec-prefs [G722,PCMU,PCMA,GSM] inbound-proxy-media [false] inbound-reg-force-matching-username [true] liberal-dtmf [true] manual-redirect [false] minimum-session-expires [60] outbound-codec-prefs [G722,PCMU,PCMA,GSM] registration-thread-frequency [30] rtp-end-port [42000] rtp-ip [10.178.239.32] rtp-start-port [ 16000] rtp-timeout-sec [60] session-timeout [60] sip-ip [10.178.239.32] sip-port [5060] sip-trace [false] tls [false] unregister-on-options-fail [true]
Are you operating behind NAT? Does this happen with other calls and other locations? Net2phone has worked for me like other SIP carriers, with no special settings. If I've had any issues, it's been on one specific route. -Avi
Its working on my different server the only problem I am now facing wrong RBT if I set media bypass false. Any idea how to achieve correct RBT on media bypass false settings?? Umair On Sun, May 4, 2014 at 9:48 PM, Avi Marcus <avi@avimarcus.net> wrote:
Are you operating behind NAT? Does this happen with other calls and other locations?
Net2phone has worked for me like other SIP carriers, with no special settings. If I've had any issues, it's been on one specific route.
-Avi
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
bypass_media=false is the default, you should never have to explicitly set it. I have no clue what RBT is? Mike On May 5, 2014, at 6:01 AM, Umair Khan <umairedu@gmail.com> wrote:
Its working on my different server the only problem I am now facing wrong RBT if I set media bypass false. Any idea how to achieve correct RBT on media bypass false settings??
Umair
On Sun, May 4, 2014 at 9:48 PM, Avi Marcus <avi@avimarcus.net> wrote: Are you operating behind NAT? Does this happen with other calls and other locations?
Net2phone has worked for me like other SIP carriers, with no special settings. If I've had any issues, it's been on one specific route.
-Avi
I mean to say a message does provider play for example "The desire cell number is switch off" -Umair Khan On Mon, May 5, 2014 at 6:36 PM, Michael Jerris <mike@jerris.com> wrote:
bypass_media=false is the default, you should never have to explicitly set it. I have no clue what RBT is?
Mike
On May 5, 2014, at 6:01 AM, Umair Khan <umairedu@gmail.com> wrote:
Its working on my different server the only problem I am now facing wrong RBT if I set media bypass false. Any idea how to achieve correct RBT on media bypass false settings??
Umair
On Sun, May 4, 2014 at 9:48 PM, Avi Marcus <avi@avimarcus.net> wrote:
Are you operating behind NAT? Does this happen with other calls and other locations?
Net2phone has worked for me like other SIP carriers, with no special settings. If I've had any issues, it's been on one specific route.
-Avi
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I still don't understand what you are asking? On May 5, 2014, at 9:45 AM, Umair Khan <umairedu@gmail.com> wrote:
I mean to say a message does provider play for example "The desire cell number is switch off"
-Umair Khan
On Mon, May 5, 2014 at 6:36 PM, Michael Jerris <mike@jerris.com> wrote: bypass_media=false is the default, you should never have to explicitly set it. I have no clue what RBT is?
Mike
On May 5, 2014, at 6:01 AM, Umair Khan <umairedu@gmail.com> wrote:
Its working on my different server the only problem I am now facing wrong RBT if I set media bypass false. Any idea how to achieve correct RBT on media bypass false settings??
Umair
On Sun, May 4, 2014 at 9:48 PM, Avi Marcus <avi@avimarcus.net> wrote: Are you operating behind NAT? Does this happen with other calls and other locations?
Net2phone has worked for me like other SIP carriers, with no special settings. If I've had any issues, it's been on one specific route.
-Avi
My freeswitch working with net2phone and the only problem is I am not getting proper ring back tune, if dialed number switch off FS keep ringing instead off play message which provider plays and if i set bypass media true in my Dial Plan FS generate proper ring back and play message when dial number is switch off. -Umair Khan On Mon, May 5, 2014 at 6:56 PM, Michael Jerris <mike@jerris.com> wrote:
I still don't understand what you are asking?
On May 5, 2014, at 9:45 AM, Umair Khan <umairedu@gmail.com> wrote:
I mean to say a message does provider play for example "The desire cell number is switch off"
-Umair Khan
On Mon, May 5, 2014 at 6:36 PM, Michael Jerris <mike@jerris.com> wrote:
bypass_media=false is the default, you should never have to explicitly set it. I have no clue what RBT is?
Mike
On May 5, 2014, at 6:01 AM, Umair Khan <umairedu@gmail.com> wrote:
Its working on my different server the only problem I am now facing wrong RBT if I set media bypass false. Any idea how to achieve correct RBT on media bypass false settings??
Umair
On Sun, May 4, 2014 at 9:48 PM, Avi Marcus <avi@avimarcus.net> wrote:
Are you operating behind NAT? Does this happen with other calls and other locations?
Net2phone has worked for me like other SIP carriers, with no special settings. If I've had any issues, it's been on one specific route.
-Avi
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Avi Marcus
-
Michael Jerris
-
Umair Khan