Error in codec negotiation: What are all the places that specify accepted codecs for outgoing calls?
We're using a major VoIP terminator and finding that on many outgoing calls, Freeswitch hangs up with INCOMPATIBLE_DESTINATION after trying to negotiate codecs. The carrier offers PCMA, and it looks like Freeswitch refuses to accept anything but PCMU: 2014-06-06 13:18:54.115197 [NOTICE] sofia_media.c:92 Pre-Answer sofia/external/0011104555493618652! 2014-06-06 13:18:54.115197 [DEBUG] switch_channel.c:3277 (sofia/external/0011104555493618652) Callstate Change DOWN -> EARLY 2014-06-06 13:18:54.175210 [DEBUG] switch_core_session.c:1005 Send signal sofia/external/0011104555391494140 [BREAK] 2014-06-06 13:18:54.175210 [DEBUG] switch_core_session.c:1005 Send signal sofia/external/0011104555391494140 [BREAK] 2014-06-06 13:18:54.175210 [DEBUG] sofia.c:5741 Channel sofia/external/0011104555391494140 entering state [proceeding][183] 2014-06-06 13:18:54.175210 [DEBUG] sofia.c:5750 Remote SDP: v=0 o=- 313783328916230866 1 IN IP4 81.52.176.165 s=- c=IN IP4 81.52.176.165 t=0 0 a=sendrecv m=audio 25080 RTP/AVP 8 13 101 a=rtpmap:8 PCMA/8000 a=rtpmap:13 CN/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 2014-06-06 13:18:54.175210 [DEBUG] switch_core_media.c:2585 Set comfort noise payload to 13 2014-06-06 13:18:54.175210 [DEBUG] switch_core_media.c:2662 Audio Codec Compare [PCMA:8:8000:20:64000]/[PCMU:0:8000:20:64000] 2014-06-06 13:18:54.175210 [DEBUG] switch_core_media.c:2662 Audio Codec Compare [CN:13:8000:20:0]/[PCMU:0:8000:20:64000] 2014-06-06 13:18:54.175210 [DEBUG] switch_core_media.c:2662 Audio Codec Compare [telephone-event:101:8000:20:0]/[PCMU:0:8000:20:64000] 2014-06-06 13:18:54.175210 [DEBUG] switch_core_media.c:2824 Set 2833 dtmf send payload to 101 2014-06-06 13:18:54.175210 [DEBUG] switch_core_session.c:1005 Send signal sofia/external/0011104555391494140 [BREAK] 2014-06-06 13:18:54.175210 [NOTICE] sofia.c:5868 Hangup sofia/external/0011104555391494140 [CS_CONSUME_MEDIA] [INCOMPATIBLE_DESTINATION] However, our codec settings in vars.xml specify: <X-PRE-PROCESS cmd="set" data="global_codec_prefs=G722,PCMU,PCMA,GSM"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMU,PCMA,GSM"/> The sip profile uses these settings. Any idea how to debug what codecs Freeswitch is willing to accept? Thanks! +Mark
We would need to see a full siptrace and console log to see what's happening here. On Fri, Jun 6, 2014 at 10:27 AM, Mark Boots <mark@votomobile.org> wrote:
We're using a major VoIP terminator and finding that on many outgoing calls, Freeswitch hangs up with INCOMPATIBLE_DESTINATION after trying to negotiate codecs.
The carrier offers PCMA, and it looks like Freeswitch refuses to accept anything but PCMU:
2014-06-06 13:18:54.115197 [NOTICE] sofia_media.c:92 Pre-Answer sofia/external/0011104555493618652! 2014-06-06 13:18:54.115197 [DEBUG] switch_channel.c:3277 (sofia/external/0011104555493618652) Callstate Change DOWN -> EARLY 2014-06-06 13:18:54.175210 [DEBUG] switch_core_session.c:1005 Send signal sofia/external/0011104555391494140 [BREAK] 2014-06-06 13:18:54.175210 [DEBUG] switch_core_session.c:1005 Send signal sofia/external/0011104555391494140 [BREAK] 2014-06-06 13:18:54.175210 [DEBUG] sofia.c:5741 Channel sofia/external/0011104555391494140 entering state [proceeding][183] 2014-06-06 13:18:54.175210 [DEBUG] sofia.c:5750 Remote SDP: v=0 o=- 313783328916230866 1 IN IP4 81.52.176.165 s=- c=IN IP4 81.52.176.165 t=0 0 a=sendrecv m=audio 25080 RTP/AVP 8 13 101 a=rtpmap:8 PCMA/8000 a=rtpmap:13 CN/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15
2014-06-06 13:18:54.175210 [DEBUG] switch_core_media.c:2585 Set comfort noise payload to 13 2014-06-06 13:18:54.175210 [DEBUG] switch_core_media.c:2662 Audio Codec Compare [PCMA:8:8000:20:64000]/[PCMU:0:8000:20:64000] 2014-06-06 13:18:54.175210 [DEBUG] switch_core_media.c:2662 Audio Codec Compare [CN:13:8000:20:0]/[PCMU:0:8000:20:64000] 2014-06-06 13:18:54.175210 [DEBUG] switch_core_media.c:2662 Audio Codec Compare [telephone-event:101:8000:20:0]/[PCMU:0:8000:20:64000] 2014-06-06 13:18:54.175210 [DEBUG] switch_core_media.c:2824 Set 2833 dtmf send payload to 101 2014-06-06 13:18:54.175210 [DEBUG] switch_core_session.c:1005 Send signal sofia/external/0011104555391494140 [BREAK] 2014-06-06 13:18:54.175210 [NOTICE] sofia.c:5868 Hangup sofia/external/0011104555391494140 [CS_CONSUME_MEDIA] [INCOMPATIBLE_DESTINATION]
However, our codec settings in vars.xml specify:
<X-PRE-PROCESS cmd="set" data="global_codec_prefs=G722,PCMU,PCMA,GSM"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMU,PCMA,GSM"/>
The sip profile uses these settings. Any idea how to debug what codecs Freeswitch is willing to accept?
Thanks! +Mark
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
participants (2)
-
Kristian Kielhofner
-
Mark Boots