Hi Anthony, Thanks for the info. By adding the span-ID = 2 , I was able to receive an incoming call successfully. The dialplan/default.xml is as below: <extension name="incoming"> <condition field="destination_number" expression="^(1)$"> <action application="bridge" data="openzap/1/1"/> <!--action application="bridge" data="openzap/1/1"/>--> </condition> </extension> <extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension> The Openzap.conf.xml looks like below: <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="9"/> </settings> <analog_spans> <span id="1"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> <span id="2"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="1"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> </analog_spans> </configuration> But still I am unable to make an Outgoing Call. Please have a look at the Freeswitch Log below: 2008-01-04 15:45:03 [DEBUG] zap_analog.c:664 process_event() EVENT [OFFHOOK][1:1] STATE [DOWN] 2008-01-04 15:45:03 [DEBUG] zap_analog.c:726 process_event() Changing state on 1:1 from DOWN to DIALTONE 2008-01-04 15:45:03 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:03 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DIALTONE 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 4 2008-01-04 15:45:07 [DEBUG] zap_analog.c:492 zap_analog_channel_run() Changing state on 1:1 from DIALTONE to COLLECT 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:07 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for COLLECT 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 2 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:507 zap_analog_channel_run() Number obtained [42] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:508 zap_analog_channel_run() Changing state on 1:1 from COLLECT to IDLE 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for IDLE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [START] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OpenZAP/42 [8d46eb7f-4305-49e8-a4a5-eb97af3b696b] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:892 zap_channel_from_event() OpenZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OpenZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OpenZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OpenZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OpenZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:64 switch_core_standard_on_ring() Standard RING OpenZAP/42 2008-01-04 15:45:09 [INFO] mod_dialplan_xml.c:217 dialplan_hunt() Processing OpenZAP->42! 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions ${numbering_plan}() =~ // 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(1)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(43)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(42)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:273 dialplan_hunt() OpenZAP/42 State Change CS_RING -> CS_EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:406 switch_core_session_run() (OpenZAP/42) State EXECUTE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:294 channel_on_execute() OpenZAP/42 CHANNEL EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:121 switch_core_standard_on_execute() Standard EXECUTE 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set(use_profile=${cond(${is_lan_addr(${network_addr})} == yes ? nat : default)}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set(use_profile=default) 2008-01-04 15:45:09 [DEBUG] mod_dptools.c:419 set_function() SET [use_profile]=[default] 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set_user(default@${domain}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set_user( default@192.168.2.51) 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute info() 2008-01-04 15:45:09 [CRIT] mod_dptools.c:630 info_function() CHANNEL_DATA: Channel-State: CS_EXECUTE Channel-State-Number: 4 Channel-Name: OpenZAP/42 Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Channel-Read-Codec-Name: PCMU Channel-Read-Codec-Rate: 8000 Channel-Write-Codec-Name: PCMU Channel-Write-Codec-Rate: 8000 Caller-Username: OpenZAP Caller-Dialplan: XML Caller-Caller-ID-Name: OpenZAP Caller-Caller-ID-Number: 1 Caller-Destination-Number: 42 Caller-Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Caller-Source: mod_openzap Caller-Context: default Caller-Channel-Name: OpenZAP/42 Caller-Channel-Created-Time: 1199441709953187 Caller-Channel-Answered-Time: 0 Caller-Channel-Hangup-Time: 0 Caller-Channel-Transfer-Time: 0 Caller-Screen-Bit: yes Caller-Privacy-Hide-Name: no Caller-Privacy-Hide-Number: no variable_use_profile: default variable_numbering_plan: US variable_user_name: default variable_domain_name: 192.168.2.51 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute answer() 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:663 channel_receive_message_fxs() Changing state on 1:1 from IDLE to UP 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:339 switch_core_session_receive_message() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [NOTICE] mod_dptools.c:361 answer_function() Channel [OpenZAP/42] has been answered 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/42)2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/42 [bef803ed-e932-4a22-84e7-9131070fe771] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for UP 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [UP] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:55 analog_fxo_outgoing_call() Changing state on 2:1 from DOWN to DIALING 2008-01-04 15:45:09 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DIALING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OPENZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OPENZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:625 switch_ivr_originate() Raw Codec Activation Success L16@8000hz 1 channel 20ms 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OPENZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OPENZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:48 originate_on_ring() OPENZAP/42 State Change CS_RING -> CS_HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OPENZAP/42) State HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:204 switch_core_standard_on_hold() Standard HOLD freeswitch@sipxpbx.oneconv.com> freeswitch@sipxpbx.oneconv.com> freeswitch@sipxpbx.oneconv.com> 2008-01-04 15:45:39 [DEBUG] zap_analog.c:244 zap_analog_channel_run() Changing state on 2:1 from DIALING to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:467 zap_analog_channel_run() Changing state on 2:1 from BUSY to DOWN 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DOWN 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:916 on_fxo_signal() got FXO sig 2:1 [STOP] 2008-01-04 15:45:40 [NOTICE] mod_openzap.c:934 on_fxo_signal() Hangup OPENZAP/42 [CS_HOLD] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OPENZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OPENZAP/42) State HANGUP 2008-01-04 15:45:40 [WARNING] mod_openzap.c:319 channel_on_hangup() VETO Changing state on 2:1 from DOWN to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OPENZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OPENZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 4 (OPENZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/42 [CS_EXECUTE] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/42) State HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from UP to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 3 (OpenZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 3 (OpenZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 4 (OPENZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OPENZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-04 15:45:40 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-04 15:45:53 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-04 15:45:53 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-04 15:45:53 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. Thanks, Irshad. On Jan 3, 2008 7:43 PM, Anthony Minessale < anthmct@yahoo.com> wrote:

What does openzap.conf.xml look like? Perhaps you are using the default which only has 1 span defined. Try cloning the whole <span id="1"> block so there is a span 1 and 2 like this:

<configuration name=" openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <analog_spans> <span id="1"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span>

<span id="2"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span>

</analog_spans> </configuration>

Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/

AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400

----- Original Message ---- From: Irshad Ahamed <irshad.fswitch@gmail.com > To: freeswitch-dev@lists.freeswitch.org; freeswitch-users@lists.freeswitch.org Sent: Wednesday, January 2, 2008 12:40:14 AM Subject: [Freeswitch-users] Not able to make an outgoing Call through FXO....

Hi,

Wishing U all a very Happy n Prosperous New Year!!!!

I am trying to make an outgoing call using FXO connected to an external telephone line.

Here is the set-up:

1. FXO connected to external telephone line 2. FXS connected to analog phone.

The Openzap.conf @ /etc/openzap is as follows: [span zt] name => OpenZAP number => 1 fxs-channel => 1

[span zt] name => OpenZAP number => 1 fxo-channel => 4

The default.xml @ /usr/local/freeswitch/conf/dialplan is configured for inward and outgoing calls on FXO as follows:

<extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension>

<extension name="incoming-fxo"> <condition field="destination_number" expression="^(35)$"> <action application="bridge" data="openzap/1/1"/> </condition> </extension>

While Start-up Freeswitch following logs were seen:

2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 1 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [fxs-channel]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1850 load_config() setting trunk type to 'FXS' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:31 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 2 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [fxo-channel]=[4] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1839 load_config() setting trunk type to 'FXO' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 4 as OpenZAP device 2:1 fd:32 2008-01-02 11:51:22 [INFO] zap_io.c:1881 load_config() Configured 2 channel(s) 2008-01-02 11:51:22 [CONSOLE] switch_loadable_module.c:748 switch_loadable_module_load_file() Successfully Loaded [mod_openzap]

and while I made a call following logs were seen:

2008-01-02 12:04:16 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/43)2008-01-02 12:04:16 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-02 12:04:16 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/43 [e3630387-25d6-4031-bf81-239c3e64e3fa] 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/43 State Change CS_NEW -> CS_INIT 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/43 [BREAK] 2008-01-02 12:04:16 [ERR] zap_io.c:884 zap_channel_outgoing_call() outgoing_call method not implemented! 2008-01-02 12:04:16 [NOTICE] mod_openzap.c:818 channel_outgoing_channel() Close Channel OPENZAP/43 [CS_INIT] 2008-01-02 12:04:16 [ERR] switch_ivr_originate.c:525 switch_ivr_originate() Cannot Create Outgoing Channel! cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 27 [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/43 [CS_EXECUTE] [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/43 [KILL] 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/43 [BREAK] 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/43) State HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from IDLE to HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/43 CHANNEL HANGUP 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/43, cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 1 (OpenZAP/43) Locked, Waiting on external entities 2008-01-02 12:04:16 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 1 (OpenZAP/43) Ended 2008-01-02 12:04:16 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/43 [CS_HANGUP] 2008-01-02 12:04:16 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-02 12:04:17 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-02 12:04:17 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-02 12:04:20 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-02 12:04:20 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-02 12:04:20 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended.

Could anyone help me out in getting FXO working ???

Thanks in advance...

BR, Irshad.

------------------------------ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.<http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ+>

_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org