Hi, I have performed a git pull today and after rebuilding I have a mismatch between level status reported by "wanrouter" and fs_cli command "show_spans". I have 1 E1 connected but show_spans displays all phisical as OK. Here a screen capture: Wanrouter Status: Device name | Protocol | Station | Status | wanpipe10 | AFT TE1 | N/A | Disconnected | wanpipe11 | AFT TE1 | N/A | Disconnected | wanpipe12 | AFT TE1 | N/A | Disconnected | wanpipe13 | AFT TE1 | N/A | Disconnected | wanpipe14 | AFT TE1 | N/A | Disconnected | wanpipe15 | AFT TE1 | N/A | Disconnected | wanpipe16 | AFT TE1 | N/A | Disconnected | wanpipe17 | AFT TE1 | N/A | Disconnected | wanpipe18 | AFT TE1 | N/A | Disconnected | wanpipe19 | AFT TE1 | N/A | Disconnected | wanpipe1 | AFT TE1 | N/A | Connected | wanpipe20 | AFT TE1 | N/A | Disconnected | wanpipe21 | AFT TE1 | N/A | Disconnected | wanpipe22 | AFT TE1 | N/A | Disconnected | wanpipe23 | AFT TE1 | N/A | Disconnected | wanpipe24 | AFT TE1 | N/A | Disconnected | wanpipe2 | AFT TE1 | N/A | Disconnected | wanpipe3 | AFT TE1 | N/A | Disconnected | wanpipe4 | AFT TE1 | N/A | Disconnected | wanpipe5 | AFT TE1 | N/A | Disconnected | wanpipe6 | AFT TE1 | N/A | Disconnected | wanpipe7 | AFT TE1 | N/A | Disconnected | wanpipe8 | AFT TE1 | N/A | Disconnected | wanpipe9 | AFT TE1 | N/A | Disconnected | ./fs_cli -x "ftdm sangoma_isdn show_spans" span:trunk1 physical:OK signalling:UP span:trunk2 physical:OK signalling:DOWN span:trunk3 physical:OK signalling:DOWN span:trunk4 physical:OK signalling:DOWN span:trunk5 physical:OK signalling:DOWN span:trunk6 physical:OK signalling:DOWN span:trunk7 physical:OK signalling:DOWN span:trunk8 physical:OK signalling:DOWN span:trunk9 physical:OK signalling:DOWN span:trunk10 physical:OK signalling:DOWN span:trunk11 physical:OK signalling:DOWN span:trunk12 physical:OK signalling:DOWN span:trunk13 physical:OK signalling:DOWN span:trunk14 physical:OK signalling:DOWN span:trunk15 physical:OK signalling:DOWN span:trunk16 physical:OK signalling:DOWN span:trunk17 physical:OK signalling:DOWN span:trunk18 physical:OK signalling:DOWN span:trunk19 physical:OK signalling:DOWN span:trunk20 physical:OK signalling:DOWN span:trunk21 physical:OK signalling:DOWN span:trunk22 physical:OK signalling:DOWN span:trunk23 physical:OK signalling:DOWN span:trunk24 physical:OK signalling:DOWN I'm using a WANPIPE Release: 3.5.17 Thanks, Stephen