Would I be correct in assuming that you can change the default paging ip and port in this manner: <action application="esf_page_group" data="mcast_ip mcast_port"/> Thanks, Brian
correct and it has a third port arg for control packet for linksys. /b On May 1, 2008, at 9:04 PM, Brian Snipes wrote:
Would I be correct in assuming that you can change the default paging ip and port in this manner:
<action application="esf_page_group" data="mcast_ip mcast_port"/>
Thanks, Brian
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks. Wikified and linked to from Dialplan Recipes on wiki: http://wiki.freeswitch.org/wiki/Multicast_Paging Brian On Thu, 2008-05-01 at 21:13 -0500, Brian West wrote:
correct and it has a third port arg for control packet for linksys.
/b
On May 1, 2008, at 9:04 PM, Brian Snipes wrote:
Would I be correct in assuming that you can change the default paging ip and port in this manner:
<action application="esf_page_group" data="mcast_ip mcast_port"/>
Thanks, Brian
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Any ideas on getting multicast to go out a vlan interface on Linux? I have a server with : eth0->192.168.1.2 Vlan : eth0.5-> 192.168.5.2 and 192.168.5.4 With bind_server set to 192.168.5.4, if I start a multicast page all of the multicast paging packets go out from 192.168.1.2 - both the page data and the control packets. I do see control packets going out on 192.168.5.2 but not the page data. Multicast was added using : route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0.5 On eth0 I see (an excerpt): 17:08:08.608714 IP 192.168.1.2.27872 > 224.168.168.168.34567: UDP, length 172 17:08:08.648713 IP 192.168.1.2.27872 > 224.168.168.168.34567: UDP, length 172 17:08:08.648854 IP 192.168.1.2.27872 > 224.168.168.168.34567: UDP, length 172 17:08:08.728581 IP 192.168.5.2.48372 > 224.168.168.168.6061: UDP, length 8 17:08:08.728586 IP 192.168.5.2.48372 > 224.168.168.168.6061: UDP, length 8 On eth0.5 I see: 17:08:38.878884 IP 192.168.5.2.48372 > 224.168.168.168.6061: UDP, length 16 17:08:38.878967 IP 192.168.5.2.48372 > 224.168.168.168.6061: UDP, length 16 17:08:43.840213 IP 192.168.5.2.48372 > 224.168.168.168.6061: UDP, length 8 17:08:43.840222 IP 192.168.5.2.48372 > 224.168.168.168.6061: UDP, length 8 Any ideas on the proper way to get the packets to flow out the eth0.5 for paging on Linux? Brian On Thu, 2008-05-01 at 21:13 -0500, Brian West wrote:
correct and it has a third port arg for control packet for linksys.
/b
On May 1, 2008, at 9:04 PM, Brian Snipes wrote:
Would I be correct in assuming that you can change the default paging ip and port in this manner:
<action application="esf_page_group" data="mcast_ip mcast_port"/>
Thanks, Brian
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Fri, 2008-05-02 at 17:28 -0500, Brian Snipes wrote:
Any ideas on getting multicast to go out a vlan interface on Linux? I have a server with :
eth0->192.168.1.2 Vlan : eth0.5-> 192.168.5.2 and 192.168.5.4
With bind_server set to 192.168.5.4, if I start a multicast page all of the multicast paging packets go out from 192.168.1.2 - both the page data and the control packets. I do see control packets going out on 192.168.5.2 but not the page data. Multicast was added using :
route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0.5
Just an update for others and I will add to the wiki later today. I had to use the iproute2 ip command for adding routes and specifically set the src to the primary ip on my vlan interface for multicast paging to work. ip route add 224.0.0.0/4 dev eth0.5 src 192.168.5.2 Without the src option it still sent packets out from the non-vlan ip. Brian
participants (2)
-
Brian Snipes
-
Brian West